New authorisation object not working after upgrade
Hello there
We have created a new authorisation object ZCODE for the customized transaction codes ZPA20 and ZPA30. This was all fine until the upgrade. Now we can't even access the data e.g. in ZPA20 with SAP_ALL and SAP_NEW profile. It gives an error that says "You have no authorisation..." The trace shows no errors.
Are there any important steps that we've missed after the upgrade?
You might have excluded custom objects from SAP_ALL (see the PRGN_CUST switch for this), or need to regenerate SAP_ALL again (there us a button for this in SU21).
Another possibility is that a field of your custom object is a data element which is now obsolete or changed with the upgrade.
Please provide more infos about the object, and what you have found so far.
Cheers,
Julius
ps: Are ZPA20 and ZPA30 copies of the original PA20 and PA30? The upgrade would have brought in some changes to the standard codes, which might not be (completely, consistently) included in the copies, depending on how you copied them.
Edited by: Julius Bussche on Nov 4, 2008 10:15 PM
Similar Messages
-
New tab (+) is not working after upgrading forefox to v 23.0.1
I had firfox version 22 i guess...Now today morning, I upgraded it to v 23. It displayed a message that one of the plug-in is not compatible with it and so wud be disabled. now later on I again downloaded the plug in to check whether its working or not but neither it worked (as I had already guessed) nor its showing in the add-ons or plug-ins.
Now I am not getting why the new tab is not working. Not at all. Its so very annoying. I have googled the question and tried resetting firefox and new tab setting in about:config. But nothing helped.
I think its because of that plug-in as I read somewhere that settings may be getting overridden by one of the faulty add-ons.
Please help.Thanks
But the problem is still there when I run firefox in safe mode... -
Earpiece on new iPhone 4 not working after upgrading to 4.2.1
I purchased my first Apple product (iPhone 4) 3 weeks ago with firmware 4.1. Finally I decided to upgrade to 4.2.1. Now when making a call I can't hear a tone or anyone talking to me. Switching to speaker works fine and so do the earbuds when connected. I read many have had the same issue and they just plugged/unplugged their earbuds a few times. Seems the iPhone forgets that the earbuds were unplugged. I tried the same and it didn't help. There is nothing stuck in the jack either. Now what?
I'll lay odds there's a piece of lint or something stuck in the headphone jack. Take a look and try to get it out with a pin or something. Happens occasionally, pretty much always to men as opposed to women. Mainly because we tend to carry our phones in our pants pockets instead of a purse.
-
My built in camera is not working after upgrading to a new Skype version
my built in camera is not working after upgrading to a new Skype version
See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4 -
File- Export not working after upgrade from 11i to R12
Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
JagadeeshaEnabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3 -
My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?
The App store is a problem for many and I have not seen a solution.
What is "wrong" with your Apple ID?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod. -
IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)
My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
3. I tried to connect to other public area's free network via WIFI, however never joined in.
I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
TerrenceI have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !
-
FireWire 400&800 (IMAC Core2) NOT WORKING after Upgrading to SNOW LEOPARD!
My FireWire 400&800 (iMAC Core2) are *NOT WORKING* after Upgrading to SNOW LEOPARD!
Any Solutions?
Thanks!
--Frank Strallents
www.SHOCKPROOFX.comI'll try your suggestions....Thanks!
Recently, I try to Re-install Snow Leopard, unfortunately, still unsuccessful.
The Mybook Icon only appears if it is connected via USB.
After using Firewire and getting used to the speed...USB 2.0 is like a Corvette racing a Veyron...lol
I am not upset on these issues, it is normal for new OS to have these problems...unfortunately, even OSX is not invincible.
I'm sure Apple/Steve is on every Programers A*s for a solution.
I still think APPLE'S OSX will still be the future of Operating system!
For now, still waiting for the patch and hopefully soon.
Suggestions are still Welcome for a Solutions:-)
Frank
SHOCKPROOFX.COM -
Super drive issue not working after upgrade of Maverick or Mountain Liont
Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one . -
Iphone 4 Home button not working after upgrade to OS 4.3.5
Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!
It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt. -
Ipohone 4 hotspot not working after upgrading to ios7.1 ?
my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.
You don't like the answer?
Again it's not a bug, use a supported carrier if you want Personal Hotspot.
Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
Message was edited by: ckuan -
Web Service is not working after Upgrade SAP EHP6
Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Umaafter changing the .NET Application , Service is working fine.
-
IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4
iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4
I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.
-
Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please helpHi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1 -
ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.
ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!
Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.
Maybe you are looking for
-
Error message when using time capsule
I recently installed a time capsule disk on my network. the initial implementation went well however when I went to my macbook pro the day after the initial backup was taking place, there was a message that the backup failed and couldn't be completed
-
Java card 2.0 and JDK 1.3
Hi all, Is java card 2.0 compatible with JDK 1.3? I have JDK 1.3 and java card 2.1 on my machine. But I have just realized that the card I have (Schlumberger's Cyberflex Access 16K cards) only support java card 2.0. So now I have to re-setup everythi
-
Icon inclusion in REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi Experts, We need to include an enhancement when an icon is clicked from REUSE_ALV_HIERSEQ_LIST_DISPLAY. Please advise. Thanks in advance, Viven
-
About the connection destination change of Salesforce of Crystal Report
Hi There are three kinds of Salesforce about Developer Edition, sandbox environment, and deploy environment(operation environment). In an in-house data base (SQLServer and Oracle), when it changes the database connectivility ahead, "connection string
-
My images are in my C drive. How do I import them into the organizer in elements 6.0? Howard