New bar code technology changing height of bar code

Dear Guru's,
I have a barcode in smartforms with the new bar code technology. It has automaticly the height of 20 mm.
Allas I need accordig to certain standards a barcode withe the height of 32 mm. I do not have any clue how to change the height of the bar code. I hope some of you do.
Thanls in advance,
JP

hi blom,
to have different size for barcode,
in smart styles, in character formats, if u create a node "c1" a character format, there in standard settings tab u can have bar code details. at barcode name u can have a drop down list from which u can select one.
if u select one for example: BC_EAN8
below it shows its height & width.
so check the barcode which have ur required size. apply that one.
hope this can help you.

Similar Messages

Change Height of Web Resource to Get Rid Of Blank and Scroll Bar

Hi, I am a junior CRM developer. I'm using CRM online.
I wrote a HTML web resources. In Web Resource Properties, I set the Number of Rows as 20.
But the problem is: If the form window are maximized, there will be blank under web resource; if the form windows become smaller, there will be a scroll bar on the side.
I want get rid of blank and scroll bar, automatically change height according to the size of the window.
I tried checkbox "Automatically expand to use available space", but it didn't work.
I don't think add CSS to my HTML will work, because CSS in HTML will change the html height, not the container in CRM.
Thank you in advance.

You most likely have a malware infection. Run and update the following scanners. (Not all programs detect the same infection.)
1. [http://www.safer-networking.org/]
2. [http://www.malwarebytes.org/]
3. [http://www.spywareterminator.com/]
4. [http://www.microsoft.com/security/malwareremove/default.aspx]
If those programs do not do the trick, try to post in the following forum:
1. [http://www.bleepingcomputer.com[
Other spyware removal forums can be found in a search.
Does the issue occur in [[Safe Mode]]?

Navigation bar changes height randomly

In the last few days I've noticed that my navigation bar is changing height at random. It has increased in height (my Back arrow is now an oval) but it will blink back and forth to its correct height at will. I haven't added any extensions lately...using Windows 7, 32...FF4.0.1.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

The news bar that appeared with the 13.0.1 update blocks functions in certian sites

the news bar that appeared after the update blocks the top of a game i play (lord of ultima) and if you click for the news it blocks saying its porn

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Cost center validity change and assign it to new company code

Hello
We are having 10 Cost centers in 1000 Company code, And validity of these cost centers is .01.01.2001 to 31.12.9999.
Now business want to create one more company code 2000. and wants to extend these same cost centers to 2000 company code also. But as per SAP std Cost center extention is not possible , bcz cost center can use by only one company code.
Now Company is saying that..they wants the same number for new company code from 23.09.2010 to 31.12.9999..
system is not allow me to change validity period of these cost centers, bcz these saying that the cost center is already defined for given period.
Beacuse new company code will start working from 24.09.2010. so i,e the reason , we want to make example "2561 cost center validity 01.01.2001 to 22.09.2010 for company code 1000. then after words 23.09.2010 to 31.12.9999 the same cost center 2561 will for 2000 company code.
but system is not allowing me to change the validity
Regards
Mahesh

Hi Mangesh
What you wish is not possible.. You will have to create new cost center and assign to the new company code...
may be for simplicity sake, you can add a prefix or suffix to the existing cost center no i.e Cost Ctr 2356 can become N2356 in new comp code
Regards
Ajay M

Add / Mark favorites to new bar in Safari IOS7

Can someone tell me how to add a new "favorite" in Safari IOS7?
I removed the standard Disney / Yahoo websites in the new bar but don't know how to mark an other website ( with a Star )
I'm sure it is quite simple ............ Thanx for any suggestions.

To add it to favourites tap the icon of the square with the upward pointing arrow to the left of the URL field, then tap Bookmark, tap Location and select Favourites (which should be at the top of the left).

HT201401 I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

CC Need New Machine Code After Hardware Change

Following a motherboard change caused by lightening, I am unable to get CC out of "trial" mode. How do I request a new machine code, if that is what is needed. I can sign in and have re-installed my subscription programs, but cannot activate programs. I get an error stating that the program is unable to connect to Internet during attempts to activate. Thanks for any help.

See if the following helps at all...
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

New Recordset Code in CS3?

I have some ASP (VBScript) pages where I use a "sort"
feature. The idea is
that when a user clicks on a column heading, this value
becomes a string in
the address bar. Then, I setup the recordset to ORDER BY
varsort (where
varsort = request.querystring("sort")).
In previous versions of DW this worked fine, but not with
CS3. The code for
the recordsets created with CS3 appears to be different. Why
would the new
code "break" my setup (it's not recognizing any sorts)?
Sort page with old DW:
http://www.presentationsdirect.com/Laminators/search_results.asp?lamtype=pouch
Sort page with new DW:
http://www.presentationsdirect.com/Laminators/Supplies/search_results_rolls.asp?width=25
Brandon
http://www.presentationsdirect.com

Thanks for the helpful info.
Brandon
"danilocelic AdobeCommunityExpert"
<[email protected]> wrote in
message news:f7ll5h$1u9$[email protected]..
> Nancy - Adobe Comm. Expert wrote:
>> The code for
>>> the recordsets created with CS3 appears to be
different. Why would the
>>> new code "break" my setup (it's not recognizing
any sorts)?
>>
>>
>> Recordset code was not updated in CS3, but rather in
8.02 to deter SQL
>> injection attacks. Quickly remake the recordset with
the new version and
>> you should be good to go.
>
> Nancy,
>
> Unfortunately, what the OP is asking for isn't possible
with the "new
> version" of recordset, as it assumes that all parameters
within the SQL
> are column value parameters, and dynamic SQL generation
is no longer
> supported. This has caused a number of folks )including
Tom Muck quite
> vociferously) to complain about the lack of versatility
of the new
> recordset code.
>
>
>
> Brandon, What you'll need to do is to hand edit the
recordset after you've
> applied it to the page. I've not tried this particular
use case recently,
> but it is possible that after editing that DW will no
longer recognize
> that the recordset is on the page.
>
> FWIW: You should never directly use a querystring
parameter in your code,
> you should always "clean" it first. IIRC The old style
of recordsets did a
> replace on the value replacing all single quotes with
doubled single
> quotes. A better way may be to have some code that
checks for the value of
> the querystring parameter and if it matches one of your
column you can
> sort on, then use a string of your own making to use
within the SQL.
>
>
> --
> Danilo Celic
> | Extending Knowledge Daily :
http://CommunityMX.com/
> | Adobe Community Expert

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Is there a way to force a new session so my "on new session" code will run?

I'm using apex.oracle.com and I find values of application (global) and page items persisting across logins.
I didn't expect that? I thought they would go away when I logged out of APEX. But I can change the values, logout, and log back in to the same values. And when I login and start an application, it's not running my "shared components > application processes" initialization code which is set "on new session".
I thought each login would be a distinct new session with it's distinct set of items. (see definition below)
So when I run an application, is there a way to force a new session so my "on new session" code will run?
>
What Is a Session?
A session is a logical construct that establishes persistence (or stateful behavior) across page views. Each session is assigned a unique identifier. The Application Express engine uses this identifier (or session ID) to store and retrieve an application's working set of data (or session state) before and after each page view.
Because sessions are entirely independent of one another, any number of sessions can exist in the database at the same time. Also, because sessions persist in the database until purged by an administrator, a user can return to an old session and continue running an application long after first launching it. A user can also run multiple instances of an application simultaneously in different browser sessions.
Sessions are logically and physically distinct from Oracle database sessions used to service page requests. A user runs an application in a single Oracle Application Express session from log in to log out with a typical duration measured in minutes or hours. Each page requested during that session results in the Application Express engine creating or reusing an Oracle database session to access database resources. Often these database sessions last just a fraction of a second.
>
Thanks -- Howard

I cleaned up the copy of the Select List code in APEX 4.1.xxx which was not operating correctly before. Now it matches what I have in APEX 4.2.yyyy. And, drum roll please, the select list seemingly works fine there (4.1) as well. But now, the initialization code--which was working fine(!)--FAILS in 4.1!
•
Okay. Maybe this will help. 1) I logged in. Ran the login page but did not login. Opened the "session" window and wrote down the session ID. Logged out and back in. 2) Ran the login page but did not login. Opened the "session" window and .... it has the same session ID? 3) So the session is persisting across logins!! How is that possible?
(More) When I log into 3 different applications, I get a different session ID for each but repeated logins always give the same session ID for any given session.

Assign chart of account to a new company code

Dear all,
I have created a new company code in system(copy an existing company code data). When I am going to a new chart of account to the new company code, system display an error message as follows:
Reset company code data before changing the chart of accounts
Message no. FC140
Diagnosis
You have selected a different chart of accounts for a company code.
You must, however, reset the company code-specific data for the old chart of accounts beforehand.
Procedure
If you really want to allocate a different chart of accounts to the company code, first of all reset
the company-code specific data for the old chart of accounts.
First of all you must, if it exists, reset the transaction data for this company code.
Finally, carry out the resetting of the company code-dependent G/L account master data
(without the general master data).
Note:
When dealing with large quantities of data, resetting the master data or transaction data can be very
time-consuming. In this case, it is advisable to schedule the running of these reports as a batch run.
Do anyone know how to solve this problem?
Thanks
Chris

Hi Chris,
I think you have copied the co. code using Trcode , When you have copied the co code all the gl master records from the source co code is also coiped to to the target company code. these gl masters use the COA(Chart of accounts) used by the source co. code.
If you want to assigna new COA now to the target co code then you have to delete all the gl accounts from this new co code you can do this by executing TR Code OBR2. Select the gl accounts, Select the check box for "with general master data" and provide the company code and execute. Now you can assign a new COA to this new company code
Regards
Pratiksha
*assign points if useful

Extend vendors to a new company code

Hi,
We are creating a new company code and I want to know whether there is any standard transcation code to mass create the vendors master from the existing company code to the new company code without any BDC or LSMW.
Thanks,
SS

Hi,
Go to transaction XK99. Here you can extend vendors from one company code to another with below steps:-
1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
2. Their will be 2 tab. select the check for DO not change for existing data.
3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
4. Bottem of this tab you have to mention the FROM company code.
5. Press F8 and save.
With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
Regards,
Gaurav

SD checklist when creating a new company code

Hello All,
Can you Pls suggest what is the SD checklist to be followed while creating a new company code..
Regards,
Sree.

Hi Biswas/Arif/Madhu,
Thanks for your help. First of all ...I am doing this as a proof of concept in a training instance. So, I can mess it as much as I can.
As you all mentioned I created a Company by copying an existing Company in EC01 (which is the T code of the screen that comes from the IMG navigation specified by Madhu). At that point system performed some copying tasks for some time and I guess my New Company got all the G/L Account, Chart Of Accounts from the old (they might not be relevant to the new company, which i will change later).
But my follow up question is ...after all this, I expected to see the new company code in OMSY screen. But I didn't. Why?
TIA.
Subra.

Creation of new T.Code for customization update

Dear All,
As per standard SAP, the below given configuration need to maintain directly in production system (not through transport).
SPRO -
> Logistics - General ---> Tax on Goods Movements ---> India ---> Master Data ---> Assign Users to Material Master Screen Sequence for Excise Duty ---> User screen reference
The above cofiguration update the view V_USRM0_R. However as per my client policy, changes (configuration change) are not allowed directly in production system. All configuration change should be through SAP transprot. Also the view is not possible to maintain by T.code - SM30(since it is a cross client & we don't allow to chanage any cross client data). The above change we use quite frequently.
Is it possible to create new T.Code for maintaining the above data? Mean to say, a new enhancement for maintaining view V_USRM0_R.
Your input should be highly appreciated.
Regards,
sp sahu

I got the answer

New bar code technology changing height of bar code

Similar Messages

Maybe you are looking for