New Battery doesn't work Macbook Pro 2008(Early)

Hey Everyone here:-) my question is weather its possible to turn of the mac from using battery? if so how to do it so i can undo it.
The reason im asking is that the guy i bought my MacbookPro 2008(Primo/Early) from said that when his batteri died he did somthing because it wouldnt run without but he cant remember what.
It runs fine from ac both with or without battery. But as soon as i unplug it it dies and it wont start from battery without ac.
I really really dont whant to paid a for a service. becouse it so old and the service is almost as expensive as the macbook i have checked:-(
I run Lion toatally updated
Have tryed both Smc reset and pram/Nvram reset.
Hope somebody nows what to do that dosent involve a service
Ps Sorry for my bad english:-)
Aktuel strømkilde: J

Check here:
http://aslezak.com/macbook-pro-not-charging-fixed
I know it deals with the SMC reset, which you've already done, but this may have the information you're looking for.

Similar Messages

9800 new battery doesn't work

hello
I bought a new battery for my torch, cause the old one draines very quickly. so the new battery doesn't work, it has an X and the OS doesn't load. I've reinstaled 3 times the OS so it's not this problem. also I've charged the battery 1 day, with blackberry original charger.
I've tried every step I found on forums but with nou luck
any help please..
the battery it's new, it's the same as the original one, I don't know if it's original 100% but it's the same as the one I had before.

BrownSugar13 wrote:
I have been having the exact same problem. I replaced my battery and it still drains really quickly; 3 hours after a full charge and no use and the battery's drained.
I would also appreciate any advice.....
Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
If the behavior continues in Safe Mode, then you should investigate more harsh remedies...WIPE, OS Reload, OS Update, BBSAK Wipe/Reload, "Bare Bones" diagnostic reload process, etc.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Microphone and Line In Suddenly Not Working Macbook Pro 15" Early 2011

Yesterday without warning, my internal mic stopped working on my Macbook Pro 15" Early 2011. I discovered this when the recipient of a Skype call couldn't hear me, and verified that the mic was not getting any level in the Sound system preferences pane. There is also no microphone input happening when I plug in my iPhone headset to the headphones jack. The audio out seems to be fine. I had to use a USB microphone to get any sound into the computer. I used the microphone just a few days ago without any issue.
I've already tried:
Rebooting
Resetting PRAM
Creating second account to test audio
And none of the above had any affect. Other note: I recently had the GPU of this computer replaced under Apple's special replacement plan. Anything else I should try before making an appointment to have the hardware looked at?

pushyourmind,
If you’re up-to-date with Software Update, then you have the correct firmware installed. If you’re running 32-bit Windows 7, then Boot Camp Support Software 4.0.4033 contains the correct drivers; if you’re running 64-bit Windows 7, then Boot Camp Support Software 5.1.5621 contains the correct drivers. Which ever support software corresponds to your version of Windows 7, try downloading the corresponding .zip archive and following the installation instructions on the corresponding link above when booted in Windows.
Boot Camp 5.1 supports Windows 8.1 on your model MacBook Pro if you’re running OS X 10.8.3 or newer. Earlier versions of Boot Camp and older versions of OS X don’t support Windows 8.1 in Boot Camp on your model MacBook Pro.

Flashing Question mark: New hard drive not working Macbook Pro late 2008

After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
Heres the device.
http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
I put the old drive back in and it works fine.
I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
Appreciate your help
Gary

Sorry I think you may be confused.
I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
I replace the macbook pro hard drive with the seagate drive:
http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
Does anyone know what the problem could be as the hard drive is brand new.
Appreciate your help
Thanks, Gary

Mini displayPort -- VGA Doesn't work (MacBook Pro 13" 2012)

Hi All,
I just bought a Macbook Pro 13" (cheapest one) and a Mini Displayport adapter to VGA, I want to use it with my Dell Screen but it doesnt work.
I only see a blue screen for a sec. and its gone... what to do?

Bring it to an Apple store or AASP.

Installed new battery. Not working right?!?!

I bought a battery from battery plus for my Macbook Pro 13" Early 2011. I installed it and it wouldn't turn on. So I figured it just wasn't charged, I plugged in the charger and it turned on. Great!! Not really. I noticed the battery symbol in the status bar has a "X" in it and when I unplug the charger the mac shuts off. Don't know why, so I'm here for help.

I would be concerned that the battery is NOT an Apple approved battery, and that is why it is not functioning properly. You should take the computer to an Apple Retail store, have the genius look at it, and possibly try the proper battery.
Good Luck.

Macbook pro mid 2006 (Intel Core Duo) how can I install new OS ? I cannot update the 10.6.8 and new software doesn't work anymore

Macbook pro mid 2006 - how can I install new OS ? I cannot update the 10.6.8 version and new software doesn't work.

A Core Duo Mac can't be upgraded past 10.6.8.
(123371)

I just got a MacBook pro 2008 and it won't turn on. the seller left it in the office since 2014 September still in good shap. all trouble shooting tip seems not to work. battery and charger seems ok.

hi,
just got a MacBook pro 2008 from a friend who bought it online. When it came we tested it and it was working. The person he wanted to supply changed his mind and my friend left the mac in the office cabinet since late last year. I decided to buy it and when I tried to turn it on it wouldn't. I charged the battery fully and checked if it was ok. I tried smc and nvram reset yet no sound or beep or any sign of life. There are no apple store around where I live in Nigeria now.
thanks

"Any suggestions would be great - Thanks!!!"
Have him take it to an Apple store or AASP. (Stay away from Macs. You're a PC guy).

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

Why doesn't the Macbook Pro's battery life last?

Why doesn't the Macbook Pro's battery life last anywhere near 5 hours, as advertised? This is my second one and it lasts 2. It's false advertising, and Apple doesn't seem to making a big deal or know anything about it, which i'm sure they do. Since their general practice is to deny problems exist in all their products, i'm here to make it known that the most recent Macbook Pro has a severe battery issue and it needs to be addressed.
I'm running OS X 10.8.3, Bluetooth is off, and haven't installed any third party software.

My MacBook Pro is over a year old and still gets 2.5 to 5 hours, depending on how intensively my application activity is hitting the CPU and disk. Remember that battery life depends on usage and component loads. You could get 1 hour editing HD video since it would hit all cores and slam the disk constantly, or 8 hours in a cabin in the woods with wifi and Bluetooth turned off, only writing text files, and with the backlight turned down and no disc in the drive. You should check Activity Monitor to make sure you don't have some processes using unusually high amounts of CPU for long periods of time (like browser tabs running Flash ads in the background, chewing up CPU and battery power without even being seen).
Like mende1 says, there are not huge numbers of Mac users getting only 2 hours, or the world would have heard about it by now and MacBook sales would be down. If you are only getting 2 hours there is something going on local to your machine or usage habits.
Terry Mele wrote:
Since their general practice is to deny problems exist in all their products
That's not strictly true. Apple has often announced updates or repair/exchange programs to address various problems that had come up over time. Maybe not always, but it does happen. They also have often helped me and my friends when we brought in Macs that were out of warranty and had problems. They had no legal obligation to work on our Macs for free, but they did anyway.

HT204291 Don't bother trying to get Airplay to work even if you have all the latest updates etc..if your computer is a MacBook Pro 2008 or earlier..The Apple staff have decided they are too old and not worth supporting...

Don't bother trying to get Airplay to work even if you have all the latest updates etc..if your computer is a MacBook Pro 2008 or earlier..The Apple staff have decided they are too old and not worth supporting...

AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.
Patrick is either mistaken or describing basic airplay and not mirroring.

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

I installed my new iMac with my Macbook Pro 2008 backup and created a network with the iMac and now the Macbook Pro cannot get internet.

I installed my new iMac with my Macbook Pro 2008 back up. I created a iMac network with Airport extreme, but now my Macbook Pro cannot get internet. any ideas on why or what to do about it.

Hello 1BillyMac,
It seems you have a network conflict that isn't allowing your MacBook Pro to connect to the internet. This may be caused by both computers sharing identical network settings. You may want to consider creating a new network location on your MacBook Pro to assign new network settings. The following article will instruct you on how to do that:
OS X Yosemite: Add a network location
A network location is a group of network settings
A network location is a group of network settings for your various network services (Ethernet or Wi-Fi for example).
If you often change network settings, you may find switching between locations quicker and easier than repeatedly modifying individual groups of settings.
For example, you might want to make a location for “home,” where you connect to the Internet with a telephone modem, and a location for “office,” where you connect to your company network and the Internet using Ethernet or AirPort.
Choose Apple menu > System Preferences, then click Network.
Click the Location pop-up menu, choose Edit Locations, then click Add .
Enter a name for the location, then click Done.
Enter settings for each network connection service you want to use in that location.
After you create your locations, you can switch all of your network settings by clicking the Location pop-up menu and choosing a different location.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

My macbook pro 2008 running OS X 10.5.8. But I can't connect my new iPhone!

My macbook pro 2008 running OS X 10.5.8. However I have recently bought an iPhone5 and I cannot curently connect my iPhone to my mac, as I need iTunes 7 - BUT i can't download iTunes 7 since my software does not support it!
So I obviously need to connect my iPhone to my laptop, but the software is getting in the way! How can I update my software so that I can run iTunes 7
Many thanks

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

New Battery doesn't work Macbook Pro 2008(Early)

Similar Messages

Maybe you are looking for