New battery is not working on Satellite C855-29N
I purchased a battery.
I've put it in to the laptop and the battery light is just flashing orange.
I tried removing the ac adaptor and battery and holding down the power butter for 30-40 seconds before putting the new battery back in again, plugging in the ac and pressing the power button but nothing is happening. It just carries on blinking orange.
I did a comparison against the batteries and both have the same numbers and codes.
I just don't understand why it won't work :(
Please help!!
+Message was edited: link has been removed+
Even if there was a right part number, I guess you purchased some kind of cheap china battery and probably the new part isnt good.
Therefore I have no other solution for you as to replace the battery once again and to purchase genuine battery for this Toshiba notebook.
Similar Messages
-
New battery is not detected on Satellite A300
Hello every body
I had this problem with my laptop Satellite A300 (PSAJ4E). I bought a new battery and started my laptop. I have Windows Vista.
The battery is not detected. When I remove the charger its work well but with indicator of low battery so Im update my BIOS but the problem is still there.
So I look around and tried to disable Microsoft in device manger.
Still not fixed properly. I removed charger and insert it again.
It shows the AC power supply but no charge.hi king_soft,
sold a third party battery?
in some cases the used controller (battery) is not recognised by your system...
you can try this (without any promisses):
shut down notebook, remove battery, connect ac-adapter and make sure unit is powered
insert battery and wait 24hours
disconnect ac-adapter and remove battery
switch machine on to make it fully discharged (some components holding electricity)
insert battery and start the unit
check powermanager or energy options if the battery is recognised...
never open up a battery pack - it's really dangerous!
if the battery pack is recognised by the system - you won!
if not make sure that your ac-adapter supplies the right voltage/current to your system
test another battery to make sure the loading device (notebook) is working properly
if so exchange battery pack!
editing: found a info that the highest rated cpu is a Intel Celeron -M 380 (1.60GHz)
Message was edited by: Al-eX -
Help w macbook 10.6.8 bought new battery A1185 not working
I need help! I bought my macbook in early 2009 and my battery stopped working about 2 years ago and in the meantime I updated the system to Snow Leopard so now it is Mac OS X version 10.6.8. I bought online a genuine apple battery model A1185 (i pulled out the original battery and that was the model number) . Now i have put in the new battery but my computer doesnt recognise that its there and has a X in the battery symbol on the top of the screen. The power cord is a green colour except for when i turn it off and then it turns orange. So I left the battery in and the cord connected overnight while it was turned off with the orange light on thinking that the new battery must be charging but today when i checked it (over 12 hours later) the battery symbol still shows an X and when i disconnect the power cord the computer loses all power indicating that it is not registered that there is a battery there.
Also when I remove the new battery and press the small button only one of the five green lights, light up. I also have been browsing this issue online and saw some reference to the old macbook battery not working with the new system 10.6 so i did a software update but still not working. Any help greatly appreciated!
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.1 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 1 GB
Bus Speed: 800 MHzThanks nbar for your reply but unfortunately its still not working after doing the SMC reset and following the other suggestions. Also below is the battery info from the Finder Menu Bar, hold down Option and click the Apple Logo > System Profiler > Hardware > Power
Battery Information:
Charge Information:
Charge remaining (mAh): 0
Fully charged: No
Charging: No
Full charge capacity (mAh): 0
Health Information:
Cycle count: 0
Battery Installed: No
Amperage (mA): 0
Voltage (mV): 0
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 77
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: Yes
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00a0caf9
Charging: No
Power Events:
Next Scheduled Events:
Type: Wake or Power On
Scheduled By: Repeating Event
Time: 30/08/13 12:00 AM
Repeating Events:
Type: Wake or Power On
Time: 12:00 AM every day -
Win 7 Touchpad driver is not working on Satellite C855-21V
Hello everybody!
I have an Satellite C855-21V and it came with Windows 8. After one week of desaster Im sure I want never again a Windows 8 on my Computer!
So I installed Windows 7 and can find all the drivers somewhere in the internet.
The only thing what is not working is the touchpad.
Win 8 driver dont work and from other models the win 7 driver don't work.
Does anybody know what Brand is the touchpad or where to find a driver for win 7?
Thank you all for the help!
Best Regards
FrankHi
First of all the touchpad should work after Win 7 installation.
The Windows system contain an standard touchpad driver which should control the touchpad.
Of course the installation of additional Synaptics driver would provide more touchpad features (finger scrolling, etc) but also without the Synaptics driver the touchpad should work.
Anyway, I already mentioned the Synaptics driver and you can download this here:
http://www.synaptics.com/resources/drivers
PS: is the touchpad enabled? F5 Enables and disables the touchpad -
So about a week ago my laptop (a bit over a year old) randomly died. I found out through friends that it was the battery. When I plugged my laptop in, it would work, but took several tries to actually turn on. When it was on, the battery icon read 0%. Today I went to MicroCenter to buy a new battery. Now the icon does read that it is charging, but the power cord is on orange except for the initial moment when I turn the laptop on. Also, it won't turn on unless it is plugged in, which is a problem for me. Once turned on, it will stay on though. Help?
you can try reseting the SMC -> http://support.apple.com/kb/HT3964?locale=en_US
Other than that, if you still have the old battery, bring both the old and new battery and your pwr adapter(along with your laptop) to an Apple Store or your local service provider : http://www.apple.com/buy/locator/service/
and have them run a battery/adapter test (I can't speak for apple, but most service providers will run this test for free) -
Installed new battery. Not working right?!?!
I bought a battery from battery plus for my Macbook Pro 13" Early 2011. I installed it and it wouldn't turn on. So I figured it just wasn't charged, I plugged in the charger and it turned on. Great!! Not really. I noticed the battery symbol in the status bar has a "X" in it and when I unplug the charger the mac shuts off. Don't know why, so I'm here for help.
I would be concerned that the battery is NOT an Apple approved battery, and that is why it is not functioning properly. You should take the computer to an Apple Retail store, have the genius look at it, and possibly try the proper battery.
Good Luck. -
Satellite L655 new battery will not charge
Satellite L655 new battery will not charge
Hello halik
It is not easy to say what is wrong there.
Have you bought new and original Toshiba battery with the same part number (model number).
Is new battery recognized by the system? -
Adding contacts to my new 8900 is not working.
adding contacts from oultlook and /or outlook express to my new 8900 is not working. i tried everything from removing and re-installing the desktop manager to removing the battery of the device. nothing seems to be working.
Ah, very helpful when we have the complete information.
Desktop Manager 4.7 is not compatible with Outlook 2000, so that won't work. You will need to use DM version 4.2, Service Pack 2; or upgrade your Outlook to 2003 or better.
For Express, it should work with Outlook Express 6. Check your advanced sync settings configuration and make sure you have it set to two-way sync and to notify you.
Desktop Manager 4.7:
The following organizers are supported for use with Intellisync:
IBM Lotus Notes 6, 6.5, 7, 8
Microsoft Outlook 2002, 2003, 2007
Microsoft Outlook Express 6, Microsoft Windows Contacts (Vista Address Book)
Novell GroupWise 6.5, 7
Yahoo!®
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My iphone battery is not working properly as compare to earlier after IOS 7 update.
Should i change my battery if yes then how much it will cost in india??Turning off things in settings, restoring as new phone, etc. everything I've seen on forums and CNet etc sites
-
hello
I bought a new battery for my torch, cause the old one draines very quickly. so the new battery doesn't work, it has an X and the OS doesn't load. I've reinstaled 3 times the OS so it's not this problem. also I've charged the battery 1 day, with blackberry original charger.
I've tried every step I found on forums but with nou luck
any help please..
the battery it's new, it's the same as the original one, I don't know if it's original 100% but it's the same as the one I had before.BrownSugar13 wrote:
I have been having the exact same problem. I replaced my battery and it still drains really quickly; 3 hours after a full charge and no use and the battery's drained.
I would also appreciate any advice.....
Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
If the behavior continues in Safe Mode, then you should investigate more harsh remedies...WIPE, OS Reload, OS Update, BBSAK Wipe/Reload, "Bare Bones" diagnostic reload process, etc.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Add new document link not working in upgraded sharepoint 2013?
Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
SushilHi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Fox news slideshows are not working in Vista Home 64 bit.
All fox news slideshows are not working since firefox 3.6 started. I can't get them to work in Internet explorer either.
== URL of affected sites ==
http://Error: $.ad is undefined
Source File: http://www.foxnews.com/static/all/js/slideshows-pack.js
Line: 850
// Slideshows - updated: 04/30/2010
// Dependencies: jQuery, jfoxCarousel plugin
(function($){
function SlideShows() {
this._data = {}; // slideshow data
this._info = {}; // current slideshow info
this._relatedMedia = {}; // related media data
this._trackData = false;
this.initialized = false;
this.toolTipId = "carousel-tooltip";
this.defaultTrackFrequency = 1; // tracker trigger
this._preloaderSrc = "/static/all/img/slideshow/slideshow-preloader.gif";
this._timer = { // timers
main: { fadeIn:800 },
carousel: { fadeIn:300 },
overlay: { onLast:10000,fadeIn:300,fadeOut:300 }
this.currentFocus = 1; // current item in focus
this.holderObj = {}; // holder for elements
this.hashObj = {}; // hash location holder
this.imgPreloadObj = {}; // holder for preloaded images
// carousel object controllers
this.carouselControlObj = {};
this.overlayControlObj = {};
this.trigger = { // listeners
main: false,
carousel: false,
overlay: false
this.overlayTimeout = false; // overlay timeout holder
SlideShows.prototype = {
init: function(config) {
for (i in config) { this['_'+i] = config[i]; }
this.main.root = this.carousel.root = this.overlay.root = this;
this.hashObj = this.helper.getHash();
if (typeof $.fn.jfoxCarousel<u>'undefined') {
showToConsole("[init] Error: carousel plugin not found!");
if (this._trackData) { // set tracking data
sTracker.set(this._trackData);
sTracker.track("pageLoad"); // page load tracker
this.preload();
this.setHolders();
this.initialized = true;
preload: function() {
var preloadImg = new Image();
preloadImg.src = this.preloadSrc;
setHolders: function() {
var SH = this;
var slideshowElm = $("#slideshow");
this.holderObj = {
doc: $(document),
body: $("body"),
intro: $("#section-intro"),
main: slideshowElm.find("#main-img"),
mainHolder: slideshowElm.find(".slideshow-placeholder"),
mainControl: slideshowElm.find(".slideshow-controller"),
description: slideshowElm.find(".slideshow-desc"),
relatedMedia: slideshowElm.find(".slideshow-related"),
carousel: slideshowElm.find(".slideshow-feature .slideshow")
this.holderObj.intro.each(function(){
var intro = $(this);
intro.find("h1:first").html(SH._info.title);
intro.find("p:first").html(SH._info.dek);
if (this.holderObj.main.size()>0) {
this.main.properties.minHeight = this.holderObj.mainHolder.innerHeight(); // get set height as "min-height"
this.main.build();
if (this.holderObj.carousel.size()>0) {
this.carousel.build();
$(document).ready(function(){ // wait for page load for the overlay
SH.holderObj.overlay = $("#slideshow-overlay");
var set = (SH.holderObj.overlay.size()>0) ? (typeof $.fn.jfoxCarousel!=='undefined') ? SH.overlay.set() : false : false;
SH.setDocReadyListeners();
this.setListeners();
setListeners: function() {
var SH = this;
var control = this.holderObj.mainControl;
// main image controls
control.find(".prev").click(function(){
SH.main.prev();
return false;
control.find(".next").click(function(){
SH.main.next();
return false;
if (typeof touchEventListener!=="undefined") {
var listenerConfig = {
elm: SH.holderObj.mainHolder,
moveSensitivity: 15,
eventsCallback: {
touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
// move callback - sensitivity
var directions = direction.join("|");
if (directions.indexOf("left")>-1) {
control.find(".next").trigger("click");
if (directions.indexOf("right")>-1) {
control.find(".prev").trigger("click");
touchEventListener.append(listenerConfig);
setDocReadyListeners: function() {
var SH = this;
// browse slideshow overlay
$(document).ready(function(){
$("#section-intro .additional-slides a").click(function() {
SH.overlay.show();
return false;
SH.holderObj.overlay.find(".close a").click(function(){
SH.overlay.hide();
return false;
replaySlideshow: function() {
var SH = this;
//TODO: build replay
this.overlay.hide(); // hide overlay
this.main.build(this.currentFocus = 1); // reset focus
sTracker.track("replaySlideshow");
// main image holder
SlideShows.prototype.main = {
properties: {},
build: function(slide,origin) {
var SH = this;
var root = this.root;
if (root.trigger.main) { return false; }
root.trigger.main = true;
slide = slide || false;
origin = origin || "main";
var control = root.holderObj.mainControl;
var data = root._data;
var initData = false;
var desc = [];
var helper = root.helper;
if (slide) {
if (slide 0) { desc.push('Source: ' + data.items[slide].source + ''); }
root.holderObj.description.html(desc.join(""));
// load related media
if (root._relatedMedia.items) {
var rmItems = root._relatedMedia.items;
if (rmItems.length>0) {
var rel = [];
rel.push('Related Articles');
for (var x=0; x 0) {
root.currentFocus--;
SH.build(root.currentFocus);
sTracker.track("clickPrevMain"); // tracker
if (!SH.isLast() && root.overlayTimeout) { clearTimeout(root.overlayTimeout); } // clear overlay timeout
isLast: function() {
var root = this.root;
return (root.currentFocus+1 > root._data.items.length) ? true : false;
// carousel
SlideShows.prototype.carousel = {
build: function() {
var SH = this;
var root = this.root;
var carousel = root.holderObj.carousel;
var data = root._data;
var list = [];
for (var x=0;x 0) {
var li = $(".slideshow > ul",carousel).children();
li.each(function(i){
var el = $(this);
var setClass = (i == eventObj.target-1) ? el.addClass("active") : el.removeClass("active");
controlsCallback: function(control) { // callback to set up controls
root.carouselControlObj = control;
carousel.find(".prev").click(function(){ // previous link
control.stopAutoScroll();
control.slide('prev');
sTracker.track("clickPrevCarousel"); // tracker
return false;
carousel.find(".next").click(function(){ // next link
// show overlay on last carousel link
//var lastLink = (!currentEventObj) ? false : (currentEventObj.batch.current+1 > currentEventObj.batch.max) ? $(document).ready(function(){ root.overlay.show(false,true); }) : false;
control.stopAutoScroll();
control.slide('next');
sTracker.track("clickNextCarousel"); // tracker
return false;
carousel.jfoxCarousel(config);
if (typeof touchEventListener!=="undefined") {
var listenerConfig = {
elm: carousel,
moveSensitivity: 15,
eventsCallback: {
touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
// move callback - sensitivity
var directions = direction.join("|");
if (directions.indexOf("left")>-1) {
carousel.find(".next").click();
if (directions.indexOf("right")>-1) {
carousel.find(".prev").click();
touchEventListener.append(listenerConfig);
// overlay
SlideShows.prototype.overlay = {
set: function() {
var root = this.root;
var overlay = root.holderObj.overlay;
overlay.find(".slideshow-feature").each(function(){
var carousel = $(this);
var allItems = carousel.find(".slideshow ul").children().children();
allItems.each(function(){
var div = $(this);
var link = div.find("a:first").attr("href");
div.hover(function(){
div.css("cursor","pointer");
},function(){
div.css("cursor","");
}).unbind("click").click(function(){
window.location.replace(window.location.hostname + link);
var config = {
auto: { set:false,speed:3000 }, // auto scroll
slide: "horizontal", // horizontal or vertical
scroll: 3, // number of items to scroll per event
show: 3, // items shown
speed: "slow", // scroll speed
rotate: false, // rotate back to star if end
//focus: { item:0,animate:false }, // focus to target item on load
eventCallback: function(eventObj) {
if (eventObj.batch.current</u>1) {
carousel.find(".prev").addClass("inactive");
} else {
carousel.find(".prev").removeClass("inactive");
if (eventObj.batch.current<u>eventObj.batch.max) {
carousel.find(".next").addClass("inactive");
} else {
carousel.find(".next").removeClass("inactive");
controlsCallback: function(control) { // callback to set up controls
root.overlayControlObj = control;
carousel.find(".prev").click(function(){ // previous link
control.stopAutoScroll();
control.slide('prev');
sTracker.track("clickPrevOverlay"); // tracker
return false;
carousel.find(".next").click(function(){ // next link
control.stopAutoScroll();
control.slide('next');
sTracker.track("clickNextOverlay"); // tracker
return false;
carousel.jfoxCarousel(config);
if (typeof touchEventListener!=="undefined") {
var listenerConfig = {
elm: carousel,
moveSensitivity: 15,
eventsCallback: {
touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
// move callback - sensitivity
var directions = direction.join("|");
if (directions.indexOf("left")>-1) {
carousel.find(".next").click();
if (directions.indexOf("right")>-1) {
carousel.find(".prev").click();
touchEventListener.append(listenerConfig);
show: function(delay,isReplay) {
isReplay = isReplay || false;
delay = delay || false;
var root = this.root;
if (root.trigger.overlay) { return false; } // if already open
var SH = this;
delay = (isNaN(delay)) ? 0 : delay; // delayed show
root.overlayTimeout = setTimeout(function(){
SH.setReplay(isReplay);
if (root.main.isLast()) {
root.holderObj.overlay.fadeIn(root._timer.overlay.fadeIn,function(){ root.trigger.overlay = true; });
sTracker.track("showOverlay"); // tracker
else {
root.holderObj.overlay.fadeIn(function(){ root.trigger.overlay = true; });
},delay);
hide: function(delay) {
delay = delay || false;
var root = this.root;
if (!root.trigger.overlay) { return false; } // if already closed
delay = (isNaN(delay)) ? 0 : delay; // delayed hide
setTimeout(function(){
root.holderObj.overlay.fadeOut(root._timer.overlay.fadeOut,function(){ root.trigger.overlay = false; });
sTracker.track("hideOverlay"); // tracker
},delay);
setReplay: function(isReplay) {
var root = this.root;
var overlay = root.holderObj.overlay;
var firstList = overlay.find(".slideshow-feature .slideshow ul").children().filter(":first");
var divs = firstList.children();
var replayDiv = divs.filter(":first");
var cloneDiv = replayDiv.next();
function configInfo(elm) {
var currentSS = root._data.items;
var info = root._info;
var count = currentSS.length;
var first = currentSS[0];
var slideshowTitle = (info.title.length > 16) ? info.title.substring(0,16) + "..." : info.title;
var slideshowImg = first.media.tm;
var slideshowDate = info.title.date;
function replay() {
root.replaySlideshow();
var items = elm.children();
items.filter("p.photo-count").html(count + " image" + [[count>1) ? "s" : ""]];
items.filter("p.date").html(slideshowDate);
items.filter("p.photo").each(function(){
var item = $(this);
item.find("a").attr({ href: "#", title: slideshowTitle });
item.find("img").attr({ alt: slideshowTitle, src: slideshowImg });
items.filter("h4").each(function(){
var item = $(this);
item.find("a").attr("href","#").html(slideshowTitle);
items.find("a").unbind("click").click(function(){
replay();
return false;
elm.hover(function(){
elm.css("cursor","pointer");
},function(){
elm.css("cursor","");
}).unbind("click").click(function(){
replay();
return false;
if (replayDiv.children().size()</u>0) {
replayDiv.html(cloneDiv.html());
configInfo(replayDiv);
if (isReplay) {
replayDiv.addClass("active").show();
cloneDiv.hide();
} else {
replayDiv.hide();
cloneDiv.show();
SlideShows.prototype.helper = {
toNum: function(item) {
item = (isNaN(item)) ? parseInt(item.replace(/[a-zA-z]/gi,""),10) : item;
return isNaN(item)?0:item;
imgLoad: function(obj,fn) {
var SH = this;
obj.alt = obj.alt || "";
if (obj.preload && !$.browser.opera) { // opera =/= img.onload
if (obj.mainHolder) { obj.mainHolder.css({ background:"url("+obj.preloaderSrc+") no-repeat center" }); }
var img = new Image();
obj.holder.css({ display:"inline", opacity:"0" });
img.onload = function() {
if (obj.outer) {
if (img.height > SH.toNum(obj.outer.minHeight)) { obj.outer.holder.css("height","auto"); }
else { obj.outer.holder.css("height",obj.outer.minHeight); }
obj.holder.attr("src",obj.src).animate({ opacity:"1"},obj.speed,"linear",function(){
if (obj.mainHolder) { obj.mainHolder.css({ backgroundImage:"none" }); }
$(this).attr("alt",obj.alt);
fn();
img.src = obj.src;
} else {
if (obj.mainHolder) { obj.mainHolder.css({ backgroundImage:"none" }); }
obj.holder.css({ display:"inline", opacity:"0" });
obj.holder.attr({
src: obj.src,
alt: obj.alt
}).animate({ opacity:"1"},obj.speed,"linear",function(){ fn(); });
getHash: function() {
var hash = (window.location.hash).substr(1);
if (hash) {
var pairs = hash.split('&');
var valuePair = {};
for (var x=0;x 1 && callback && count%freq<u>0) {
callback(data);
var sTracker = new Trackers(); // private
function showToConsole(str) {
if (typeof window.console</u>'object') { console.log(str); }
var slideShowsPack = window.slideShowsPack = new SlideShows();
})(jQuery);
// Tracking Data Here
var trackData = {
ads: {
buildSlide: {
frequency: 1,
callback: function() {
$(document).ready(function(){
if (typeof $.ad.dc.load!=="undefined") {
$.ad.dc.load();
omni: {
buildSlide: {
frequency: 1,
callback: function(data) {
data = data || false;
if (!data) { return false; }
if (!data.slideNumber) { return false; }
if (typeof $.ad.omni.load!=="undefined") {
$.ad.omni.load({ "slide": data.slideNumber });
var initializeSlideShow = window.initializeSlideshow = function() {
if (typeof slideshowData!=="undefined") {
if (!slideShowsPack.initialized) {
slideShowsPack.init({
data: slideshowData,
info: slideshowInfo,
relatedMedia: relatedsData,
trackData: trackData
} else {
if (typeof window.console==='object') { console.log("[error] No Data found for: slideshowData"); }
This the line highlighted:
if (typeof $.ad.dc.load!=="undefined") { -
Sharepoint Custom calendar – Hover over the date to add a new item is not working – Sharepoint 2010
Hi,
In my Sharepoint visual web part i am using default sharepoint calendar view. But Mouse hover over the date to add a new item is not working. Please see this image below i need the same add new item functionality.
Hi Sudhanthira,
Couple of simmilar queries i can see from Madhu posted.
Please follow this thread:-
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/b62f9b7e-2ce1-4efd-905c-9cc5471ad216
To be or Not to Be..The question is this only...... -
The option to open a new tab is not working?
The option to open a new tab is not working?
I click on the little box but nothing happens?Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
back up from icloud to new device is not working as it is saying that I dont have enough storage, when I am only trying to use 3GB out of my 5GB allowance???
I may misunderstand your post - you "backup TO icloud" or restore from icloud to a new device. Not sure which of these you mean.
If backing up TO icloud, the problem may be that there's not enough storage on your device, not icloud, as a device needs a good bit of storage to create the backup.
If restoring from icloud to a new device and you get the error, the storage referenced must be that on the device, although that doesn't seem possible, since a device has more memory than 5GB.
Maybe you are looking for
-
Org Chart 3.0 - Print button on Org Unit's Profile not working
Hi, In Org Chart, after we click on the Org Unit, then the details will be displayed on the right panel. We clicked on the Action button on the right panel, and click on the Org Unit Profile, a new window will be opened. Now, clicked on the small pri
-
My messages are not going through imessage
I am unable to send message in my ipad through imessage. However my iphone is working fine and I am able to send messages.
-
Where can I purchase a new MixRadio voucher in Tur...
do you have any nokia centre in turkey where I can purchase radiomix voucher? Let me know for Lumia 925 Moderator's note: We amended the title of this post as we moved it to the most appropriate board.
-
My daughter locked her Ipad so I restored it and now am trying to activate it. It ask for a apple id/pw but the one she thought it was is not working. Any suggestions?
-
Yesterday I tried Adobe Captivate 2 on two computers: A fully updated Windows XP and a fully updated Windows 2000 SP4 on a ThinkPad T60 On the XP computer it worked like a charm... but when I tried it on the w2k computer it crashed.. and the followin