New battery needed for Macbook 13" late 2008

Does anybody know where I can buy a new battery from for my Macbook? I ordered one a while ago from Misco and they finally admitted their supplier is having problems so are refunding me. I am desperate for this battery as the trackpad no longer works and the back of the laptop is swelling where the battery sits. This battery is for the UK. Can anybody help please please please? Thank you

Battery for A1280 is available at Amazon and Apple Store.
http://www.amazon.com/Upgraded-Version-Battery-Macbook-Aluminum/dp/B006ZGCH18/re f=sr_1_5?ie=UTF8&qid=1418238014&sr=8-5&keywords=macbook+battery
http://www.amazon.co.uk/Battery-MacBook-Aluminum-A1280-A1278/dp/B007AJZMES/ref=s r_1_3?ie=UTF8&qid=1418238343&sr=8-3&keywords=macbook+battery
http://store.apple.com/us/product/MB771LL/A/rechargeable-battery-13-inch-macbook -aluminum?fnode=5a

Similar Messages

Upgrade from 160 GB to 1 TB internal hard drive for MacBook Aluminum Late 2008?

I'm trying to upgrade my MacBook Aluminum (Not Pro) Late 2008 from 160 GB SATA Disk to 1 TB Western Digital WD10JPVT Scorpio Blue 1 TB 2.5" Internal Notebook Hard Drive. But I wasn't sure if this would work with my laptop and if it will fit. Can anyone help me out? Here is the links about the hard drive.
http://www.wdc.com/en/products/products.aspx?id=800

It may not work if it is a SATA III 6 Gb/s interface because your model only supports SATA II 1.5 and/or 3.0 Gb/s interfaces.

Where can I find an original battery for Macbook 13" late 2008 (aluminium)

Hi everyone!
I have serious problems with my battery, I've tried to purchase an original new one on the online store, but it's not longer available. I want to know if you can tell me which brand is the best?
I'm in Mexico CIty, so I can puchase it by Amazon.com

You may not be able to get it from the online store, but you should be able to get one from an Apple Authorized Service Provider (AASP.) They have access to replacement parts that are not shown in the Store. You should be able to search for AASPs on the service and support site.

New hard drive for macbook pro (late 2009) anti shock or not?

I thought I read somewhere that if you replace a HD in your macbook pro, the new one should not have shock protection as it interferes with the mac's own internal shock sensor.
So I went out and bought a Seagate 7200.4 500GB drive - without the 'G' Suffix - ie the non-shock version of the drive.
I carefully opened my Macbook Pro and was surprised to see the drive in it was a Seagate with a 'G' Suffix!
Does the macbook actually have it's own separate shock sensor?
Is there any published data from apple as to what drives to use for replacement?
Thanks!

Shifty08:
I can speak form experience!
I got messed up 3 times with my Mid 2009 15 inch MB Pro (Some 13 inch units also) with a Seagate 500 GB Sata // 3 gps HD right after the EFI 1.7 update. There may be issue with some other larger 3rd party HDs including WD.
This is my MB Pro present configuration:
+MacBook Pro+
+Model Identifier: MacBookPro5,4+
+Processor Name: Intel Core 2 Duo+
+Processor Speed: 2.53 GHz+
+Number Of Processors: 1+
+Total Number Of Cores: 2+
+L2 Cache: 3 MB+
+Memory: 4 GB+
+Bus Speed: 1.07 GHz+
+Boot ROM Version: MBP53.00AC.B02+
+SMC Version (system): 1.49f2+
This is my present internal HD configuration:
ST9500420ASG:
+Capacity: 465.76 GB+
+Model: ST9500420ASG+
+Revision: 0002SDM1+
The resolution to these issues is now well established and discussed on a different discussion thread.
One has to have Firmware EFI 1.6 installed to avoid the problem. If Firmware EFI 1.7 is installed--back roll it to EFI 1.6. Run the Performance update 1.0.
In order to do this you have to remove the 500 GB 3rd party HD and "back roll" to EFI 1.6 from an external HD. There is a special download for this.
If you have Apple Care or have 3 month coverage for free tech support have the Apple store do it for you. It is about a 20 min routine. Schedule this appointment with the "Genius" through the Apple care. Apple is aware of the issue though some of the Genius staff are not. There is an Apple Engineering bulletin on this. There is a *EFI 1.6 rollback.dmg* file which is on the apple site.
Once this rolled back is in effect, then re-install the 3rd party HD. Then install the Performance Upgrade 1.0--and the MB Pro will work at 1.5 GPS--but this is better than nothing and it does not seem to be an issue for this MB Pro.
Now one likely can install the larger drive in an enclosure and it may work without this modification. I have not done this so I can not confirm this.
I did install the factory supplied 250 GB Hitachi HD in an enclosure and have it working as Universal boot drive.
See below for details.
+1394/USB20 Drive SBP-LUN:+
+Capacity: 232.89 GB+
+Removable Media: Yes+
+BSD Name: disk2+
+Mac OS 9 Drivers: No+
+Partition Map Type: APM (Apple Partition Map)+
+S.M.A.R.T. status: Not Supported+
Volumes:
+Leopard Universal Boot:+
+Capacity: 220.76 GB+
+Available: 171.42 GB+
+Writable: Yes+
+File System: Journaled HFS++
+BSD Name: disk2s3+
+Mount Point: /Volumes/Leopard Universal Boot 2+
This universal boot drive is explained in the Apple KB posting here.
*http://support.apple.com/kb/HT2595*
Best of luck!
bobg

MacBook Pro Late-2008 Battery Can't Keep a Charge.

I understand I bought my MacBook Pro Late-2008 just before they upgraded the MacBook batteries; it's never held a good charge, so I've had to keep it plugged in. Lately I've been finding myself needing it when outlets might not be readily available.
After I remove the power cord, it doesn't stay charged for more than 3 minutes, 30 seconds (I've timed it more than once). Even with its age, this seems like a significant problem with the battery.
I'm really not sure it's worth it to spend $130 on a replacement battery, and I'm not in a position to simply get a new MacBook.
Are those third-party batteries actually legit? Is there a chance that an Apple Store might be able to take care of it? I'm well past the life of my Apple Care, obviously, but three minutes for the battery?
What is my best option? Or just suck it up and deal with having to find an outlet wherever I go?
Thanks.

There are many third party batteries that are at best suspect. I have seen on Amazon what appear to be legitimate OEM Apple batteries which I suspect are graymarket products. You may try that at your own risk. If you purchase from Apple. you will know what you will be getting and with a warranty.
Ciao.
OWC has what appears to be a battery that will fit your MBP. They are a reputable vendor for Mac compatible products,
http://eshop.macsales.com/item/NewerTech/BAP15MBU54RS/
Message was edited by: OGELTHORPE

My macbook pro (late 2008) shuts down but battery is at 25-30%

My macbook pro (late 2008) shuts down but battery is at 25-30% and I don't get a low power warning box before this happens. This only happens when the power chord is not connected, and it restarts with no problems once I put the power chord in. Does this mean I need a new battery, or is it an indication of something else? Using osx 10.5.8

Mine is Unibody 15" MBP late 2008, with the exact problem as yours. It can be a sudden shut down at 25-32%, or, after upgrading to OS 10.7.2, can be hang all of sudden on battery power.
Condition on, "Replace Soon". From 4.5 - 6 hours when new, goes down to 1 - 2 hours on discrete graphics.
But after 'abusing' it for the first year in the heat of Jakarta's climate in a non AC room when doing a video editing, before moving back to a comfort AC room at home sweet home, the battery performance is still top notch comparing to other kind than Apple. Also, it caused me to replace the right fan, after a lot of hard work on that first year. Oh, and by the way, I regularly done the battery calibration, at least once or twice between 3-6 months.
Here's also an useful link about battery I found on the internet:
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batterie s
My battery condition:
Battery Information:
Model Information:
Serial Number:          6N8389BD13EB
Manufacturer:          SMP
Device Name:          bq20z951
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          002a
Hardware Revision:          000a
Cell Revision:          100
Charge Information:
Charge Remaining (mAh):          2192
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          2716
Health Information:
Cycle Count:          616
Condition:          Replace Soon
Battery Installed:          Yes
Amperage (mA):          254
Voltage (mV):          12392
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          0
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Automatic Restart on Power Loss:          No
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          No
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          5
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          85
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x0063ac36
Charging:          Yes
Got the battery replacement today. Hopefully it will last for at least 3 years like it predecessor.

HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

Internal HD upgrade or external HD for my Macbook Pro (Late 2008)

Hello,
I am finding the 250gb internal hard drive not enough and want to upgrade to a 500gb/1tb hard drive for my macbook pro (late 2008 edition).
What I am wondering is whether to change the internal hard drive OR buy the fastest possible external hard drive for my mac which I believe is one that works with firewire 800 as my late 2008 macbook pro does not come with USB 3.0.
The external hard drive I have found is £110 and my macbook would be using the Firewire 800 connection:
LaCie Rugged Triple 301984 1TB USB 3.0 and Firewire 800 5400 rpm Portable Hard Disk Drive
http://www.amazon.co.uk/Rugged-Triple-301984-Firewire-Portable/dp/B005C2BNJI
I dont necessarily need the portability of a external hard drive. I work with large files (photoshop, illustrator files mainly) and would would be concerned that I would not be able to work directly on the hard drive for this type of work so an internal hard drive may be better/
Can anyone suggest a good, fast, cheap, popular internal hard drive compatible with my computer and whether you would suggest changing the internal HD or buying an external.
I am running Mavericks and the only other change I have made is by upgrading my RAM from 4gb to 8gb. Thanks so much for your help
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP51.007E.B06
SMC Version (system): 1.33f8
Serial Number (system): W8******1G0
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>

For both convenience and speed, I'd recommend replacing the internal hard drive. Your MacBook Pro can handle nearly any internal SATA 2.5" HD on the market, including 7200rpm models. For what it's worth, I'd recommend a Western Digital Black WD7500BPKX or similar or Hitachi HGST 7K1000 although in my experience Hitachi drives run hot and that's the reason I don't use them as internal drives.
FW800 is fine, but then you have an external hard drive to lug around plus the connection is considerably slower than the internal SATA connection used by the internal hard drive.
Note that you will have to either 1) clone your existing drive to the new drive or 2) completely reinstall OSX and all your apps from scratch to the new drive when you replace the internal drive. If it were me, I'd take the opportunity to reinstall everything from scratch.
btw, I have done this myself on a number of 2008/2009 MacBook Pros and it's not hard at all. iFixit has tutorials on how to do this. (Here is a link to the one that I believe is your model.

MacBook pro (late 2008) shutting down even without the battery

Hello
I have a MacBook pro late 2008 model, recently it started to randomly shut down.
I have tried the following
- Reseting Pram
- Reseting the SMC
- Recalibrating the battery
- New hard drive
- Returned to original RAM (from 4 to 2Gb)
- Removed the battery and run with the MagSafe only
- Downloaded a fan control program to run it at max and verify if this was not a heating issue (although this also happens right after starting the laptop)
Does anyone have any suggestions? I'm already loosing hope on my Mac :(
Thanks for any help that you could provide

Hi V,
Even though the symptoms don't match up exactly, you may have the NVIDIA issue. First, go to System Profiler > Hardware > Graphics/Displays and see if you have the GeForce 8600M GT GPU. This is the GPU covered under the free repair program. While there, also look at PCIe Lane Width. If it says anything other than x16, the GPU has issues (but this is only one potential symptom). If you have the 8600 GPU, bring the MBP to an Apple Store or AASP for free testing. If Apple's free test confirms the issue, repair is free. Read all about it here: http://support.apple.com/kb/TS2377
Also, whether you have the 8600 or not, you should run all the updates in Software Update.

Wireless instability in new Macbook pro (late 2008) (uniblock model)

I have been experiencing the same kind of instability problems with the wireless connections of the new Macbook pro (late 2008 "unibody") reported in other posts in this section.
My network configuration includes a Time Capsule base station(802.11n (802.11b/g compatible)) and an Airport Express(802.11n) that extends the network and is used mostly for wireless music feeding into sound equipment.
I have been using this network for months with my old MBP (Core Duo,15.4', 2.16 MHz) and it works perfectly. From that notebook iTunes recognizes the Airport express immediately and feeds music without any problems.
I transferred all my configuration to the new Macbook Pro (late 2008 - which is indeed a beautiful piece of hardware, exquisitely designed) and everything works perfectly... except the wireless connection.
It behaves quite unstably. Usually, it is necessary to turn airport off and on several times in the computer to get iTunes to connect to the Airport Express. Even then, the music stream suffers from frequent interruptions and suddenly gets in trouble and looses connection.
While iTunes is trying to reconnect to the Airport Express, usually the internet connection fails altogether, making it necessary to turn airport off and on in the notebook to restart all the wireless connections.
All along, the old MBP wireless connections behave perfectly, proving the problem is in the new Macbook (late 2008) and not in the network.
I have loaded all the firmware and software updates available in the Apple site, and the behaviour improved somewhat with the EFI firmware update 1.6 and SMC firmware update 1.2. I also reset the SMC.
However, the problem is still there and appears now and then seemingly without a pattern.

Folks: *there may be a power/signal issue going on here.* I had a similar problem of my network connection dragging to practically nothing when hooking up my LaCie external drive to the USB port. Please see my post below (link and text)
http://discussions.apple.com/thread.jspa?messageID=9914924#9914924
Folks:
Apple needs to get on this issue fast; after turning off my N mode on my WRT160N Linksys Router, I got my packet speed back up to where it should be... HOWEVER I noticed another problem.
When I hooked up my LaCie external drive (connected via USB), my packets on PING practically stall to nothing. I then eject the external USB drive and re-ping and I get acceptable packet speeds; I re-connect the LaCie external drive to the USB port and my PING crawls to nothing.
There is CLEARLY a correlation between the network speed crawling to nothing while hooking up an external drive; possibly a power sink and/or signal interference on the Airport when hooking up a USB device? (or perhaps even Firewire 800 too?)
I sure hope Apple is reading this one, because this could be a MAJOR issue that needs to be fixed ASAP.

Macbook pro late 2008 battery problem

I have a macbook pro late 2008 and I've been experiencing problems with the battery. I have changed the battery two times till now and now it's telling me to service battery. I am not a heavy user and I always try to drain the battery twice a month. Can it be the power supply?
I need help

Hi there,
I seem to have the same problem. My battery indicator gives me no more than 2 1/2 hours of battery life.
I checked to see if my computer was set to better battery performance and it was.
Now initially I thought that this may because of my external display (ACD 23") and my LaCie rugged external HD, which takes power from the FW connector. But even when I disconnect both of them I still only get two and a half hours of battery life, even when I leave the computer alone to just sit there.
Now I'm guessing this isn't normal. It may take an software update to correct this. But if this doesn't get corrected this thing is useless to me. And I will no doubt return it.

Trackpad non responding for wake up on macbook pro late 2008

i mentioned a problem with my macbook pro late 2008 since upgrading to 10.8. while clicking the trackpad to wake up my macbook air 2011 everything works fine, but on my macbook pro late 2008 it wouldn't. i have to click either the spacebar or any other key on the keyboard. otherwise no issues with the trackpad. is there anything different to the air, is there a fix or is it just normal. thanks for replies. greez.

Yes. That wouldn't hurt. I do have a couple of other suggestions:
1 - create a new test library, import a few photos and see if the import succeeds. If it does then the problem is with the original library.
2 - if the test import crashes log into another account on your Mac, create a test library if there isn't a library there, and see if you can import. If you can't then a reinstall of iPhoto would be the next step.To do so you'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Reinstall iPhoto from the disks it came on and apply the latest updates.
3 - if you can import successfully in the second account your primary account is the culprit. It could be a preference file other than iPhoto's that's causing the problem. Here's how to determine if that's the case.
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
OT

HT3207 MacBook Pro late 2008 needing RAM

I need more memory in late 2008 15" macbook pro. It has 2 RAM now. What do I need?

The 2 best there are for Mac are:
http://www.crucial.com
AND
http://eshop.macsales.com/shop/apple/memory/
If you are familiar with your Mac and the Ram it needs, I suggest you let crucial scan your computer and it will tell you your options.
Cheers
Don
Both of these sell the best there is when it comes to ram for Mac's

Flashing Question mark: New hard drive not working Macbook Pro late 2008

After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
Heres the device.
http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
I put the old drive back in and it works fine.
I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
Appreciate your help
Gary

Sorry I think you may be confused.
I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
I replace the macbook pro hard drive with the seagate drive:
http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
Does anyone know what the problem could be as the hard drive is brand new.
Appreciate your help
Thanks, Gary

Can I use my old Macbook Pro Ram in the New Macbook Pro (late 2008)

I have 2, 2 gig DDR2 sticks of ram in my macbook pro. I wanted to know if they would work in the new macbook pro (late 2008)? I know the new one uses DDR3 - What would be the downside of using DDR2 in a DDR3 macbook? Would the graphics cards work to their potential? Thanks!

No. The DDR2 RAM in your older computer is not the same as the DDR3 RAM used in the new ones. There are significant differences between them not the least of which is pin count.

New battery needed for Macbook 13" late 2008

Similar Messages

Maybe you are looking for