New BEE in the Mobile Development Farm

Hi Experts,
If Someone can provide from where to start SAP Mobile development then it will be great help.
Viral Shah
Edited by: ViraldShah on Oct 24, 2011 7:40 PM

Hi Virald,
Mobile development within the SAP product suite is a very broad term.
Have a look at the current strategy
http://www.sap-tv.com/6449
See where you believe you could fit in, as well as which would work best for your client / organisation to commence your learning.
A good place to start is on SDN itself:
http://www.sdn.sap.com/irj/sdn/mobile
Additionally, there are great training videos on youtube:
http://www.youtube.com/user/SUPDeveloperProgram
Welcome to mobile sector within the SAP developer community.
Regards,
amit

Similar Messages

Unable to add new WLC to the Mobility Group

Hi,
Any help will be very welcome.
I recently add a second CT5508 to the network, but when I tried to add the first 5508 to the mobilty group I received a message like this:
"error in creating member"
I've tried different mobility names, via GUI, via CLI and always the same error.
I've verified twice or more than twice connectivity issues or any error on the entering the MAC and IP of the controllers, everything is fine.
Any idea?
I'm using version 7.0.116.0
Thanks

Hello Moises,
Did you load a configuration backup from your first WLC to the new second WLC? If so, it's possible we have a stale duplicate entry from loading a configuration.
On the WLC where you cannot add the member, let's try clearing out the stale entry from the CLI:
config mobility group member delete 00:00:00:00:00:00
Then, try to add the member and see if it works.
-Pat

Force a delete and push new filws to the client

HI,
We need to update an application published in Olite. This application is a .Net web site, pre-compiled. Every time the application changes, we need OracleLite to delete all the files and then push the new ones to the mobile units.
Actually, Olite pushes only the files that he determines have changed, but because of the nature of our files, we need it to replace them all. Also, it appears that if a file needs to be deleted, Olite will not delete the file.
I need to be able to force a full update (delete all files and push all files) on each client.
Can we use OTL language to build a command that could be sent to the client using the web Administrator? If yes, does someone have done that before and could help us develop with the OTL language.
Thank you
JSET

Hi Florent,
1. For the first error "The name has already been shared":
I recommend you can use the the cmdlet "Get-SMBShare" to list all share folders firstly before creating a new share, and check if there is share named "$unit" on remote server.
2. For the second error "The requested object could not be found":
According to your script, you want to creat a new share on remote computer, then add this share folder to the new created namespace on file server, please try the script below:
New-DfsnRoot -Type DomainV2 -TargetPath "\\$newDestServer\$unit" -Path "\\$RootNameSpace\$unit" -EnableSiteCosting $true
New-DfsnFolder -Path "\\$RootNameSpace\$unit\$site" -TargetPath "\\$newDestServer\$unit"
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

How do I view and add photos on the mobile app?

QuestionHow do I view my photos and add new photos on the mobile app?
Answer
To view your photos, you may either select the Photos icon from the Home screen:
Or, you may select the Profile icon from the Home screen.
From your profile picture, you can start scrolling to view your photos one by one. Or, touch the camera icon on your profile picture to view all your photos at once.
To add new photos to your account, touch the camera icon on the top-right corner of your Photos page:

http://support.apple.com/kb/DL1455?viewlocale=en_US&locale=en_US

Hello, How can I switch to the mobile version planning page?

I just created my web site and I'm not able to create a new page inside the mobile version because I don't know
how I can switch, for example, from tablet planning page to mobile planning page... please help me!

Hi,
Click on Plan tab (Right hand side top), and click on phone layout, as shown below

Is the mobile protection plan included in the Next plan installments?

My husband just upgraded to a new phone with the Next plan. On our new invoice papers, the Mobile Protection Plan is listed with a cost of $9.99. My question is, with it being a phone on the installment plan, is the insurance automatic? He has a tendency to drop his phone and shatter the screen and I need to know if it's covered or if I need to add it to our plan. Thanks!

The Mobile Protection plan is entirely seperate from the Next plan. The costs are seperate. If it is on your bill, then you likely were signed up for it. You may want to call support and confirm your choice. You may want also want to review the protection plan options and decide if you really need the higher priceded plan. The basic plan for phone damage, loss and theft should only be $6.99. https://mobileprotectionpack.att.com/content/asurion/attmdpp/en/protection-plans.html

Itunes says i need a newer version of apple mobile devise support when i plug my iphone4s in

i've just downloaded the newest version of itunes but when i plug my phone in it says it needs a newer version of the mobile support thing and now my phone cant connect to my itunes so i cant get music or upload my photos to my laptop or anything how do i overcome this because i need music on my phone from my laptop!?

Hi there,
I would recommend going through the process of removing and reinstalling iTunes and its supporting software (Apple Mobile Device Support) to ensure that everything is up to date. This process should not effect your music library.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
-Griff W.

Delete the existing sharepoint farm it is a development machinie and re create again in same server

Hi
i want to
delete the existing sharepoint farm it is a development machinie and re create again in same server.
because i am facing issues to configure user profile service,
the user profile syncronisation service starting and after some time its stopped.
while i am reading http://www.harbar.net/articles/sp2010ups.aspx
in current farm i given ip address for sql server while installing sharepoint
you have not used a Fully Qualified Domain Name or IP Address when specifying
the SQL Server when running the SharePoint Configuration Wizard (PSConfig). Using either is strongly discouraged,
if i recreate the farm is it creates new databases in sql srver?
adil

1. Uninstall any custom / third party solutions deployed in server.
2. from central admin, delete web applications along with DB.
3. delete all service applications.
4. From the program settings, un-install sharepoint.
5. Go to SQL and delete if any DB from SP is left.
6. Uninstall SQL, if you see any issue.
These are high level reverse steps of the installation.
Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

I just upgraded to the new mobile me calendar and now all my calendar entries on iCal have been erased. As I type this the calendar entries are still on the mobile me and iphone calendars. How do I restore the calendar entries to iCal?

I just upgraded to the new mobile me calendar and now all my calendar entries on iCal have been erased. As I type this the calendar entries are still on the mobile me and iphone calendars. How do I restore the calendar entries to iCal?

Please always post your System details when you have a query. The upgrade to the new MobileMe calendar produces different results, and different problems, with different versions of OSX.
Snow Leopard: during the upgrade process your iCal calendars should be moved to MobileMe (this can take some time and you have to wait for it to happen). Once done, your iCal reads the calendars from MobileMe so any changes made in either place will be visible immediately. If this has not happened then this Apple Tech Note provides instructions:
http://support.apple.com/kb/TS3397
Leopard: when the upgrade is completed iCal on Leopard will not be able to see the MobileMe calendars until an additional process is carried out, detailed in this Apple Tech Note:
http://support.apple.com/kb/HT4330
Tiger: iCal on Tiger cannot read the MobileMe calendars, period. The only workaround is to upgrade to Leopard, or Snow Leopard if possible (Intel Mac required).

When I plug my iPhone 4s into my PC, I get an error message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. Has anyone else run into this problem recently?

When I plug my iPhone 4s into my PC, I get a message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. iTunes won't recognize my phone and so I can't synch it. Has anyone else run into this problem recently and how did you resolve it? Thanks!

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

Error in creating New Entry from the Client in NW Mobile 7.1

Hi All,
I have created a mobile application for Laptops in NW Mobile 7.1.
I have a requirement to create an entry from the client, i.e., I need to create a PR in the client. The model bindind, the backend adapters, bapi wrappers are in place.
I have used the standard create BAPI for PR and wrapped it in a BAPI wrapper. I just have to give the PR details and save the entry in the client. The BAPI wrapper has the logic for generating the new PR number.
My problem here is, when I try to create a new PR, give the details and save, the entry is not getting updated in the backend and the sync state is '201'.
I checked the "Message Monitoring" in the NW Mobile Administrator for the particular SWCV.
For this create PR transaction, the particulars are as below
Message State: Error - Stop Flow
Message Type: Transaction
Error: "Error occurred while fetching synckeys from table ZDOE01700000SL"
"ZDOE01700000SL" is the Sync key look up table for PR(my data object).
Please let me know where I have gone wrong and guide me in rectifying this problem.
Thanks and Regards,
Sunil

Hi Sunil,
From my understanding, looks like you are not filling synckey when you are creating a PR in your client. Synckey is a unique key on the DOE using which you can uniquely identify any node.
There are two scenario's atleast as I know, where this error would have come.
Case 1. If you are modifying something on client, which has been send by DOE, then you are not supposed to change synckey because it is a primary key. Now if we assume that you are not modifying synckey but when you are sending an update, check if by any chance the synckey is not going to DOE which is one case, and the second one is, after DOE has end that record to client, someone has cleaned up all the tables on DOE for that dataobject or someone has deleted that entry on the backend because of which the entry has been deleted on DOE. In either case, you are modifying something on client which is actually not present on DOE because of which when the DOE tries to look up based on synckey it doesn't find the needed record.
Case 2. If you are creating something on client, then you are supposed to create a synckey which is a 32 bit character GUID. I think in your case, you are missing the synckey when you are sending it to DOE. Check if there is any API for doing that or you have manually create a GUID and send it.
Hope it works out.
Best Regards,
Siva.
PS: Reward with points if you find the post useful.

When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

Try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

New version of the LabHSM Toolkit for Complex Event-Driven Development is Now Available!

A new version of the unique toolkit is now available for download. As announced earlier, LabHSM makes it possible to easily create and then maintain complex event-driven applications in LabVIEW as a collection of HSM-driven active object VIs using a higher level of abstraction and agile software development methodologies. These active object VIs are created based on a universal Hierarchical State Machine ( HSM or statechart ) template. Therefore, all your code looks similar regardless of its functionality!
So, what’s new in version 1.1?
• "No hands" block diagram modifications! Version 1.1 actually creates, renames, and removes actions on the block diagram as you define, rename, and remove them in the editor! (No, it can't fill in all the details for you, but it can do some, if you think ahead, by replicating similar actions.)
• Two new screens, Events Usage and Actions Usage, (available in licensed copies only) clearly show where (in which state(s)/transition(s)) and how (is it an entry action, exit action or event handling action?) a particular event or action is used. Moreover, if after selecting an instance on the list, the Go To button is pressed, it makes the main screen jump to respective location in the HSM structure. In the case of Actions Usage screen, the respective action is also displayed on the block diagram. Thus, these screens provide two more different cross-sections of the HSM data set and two additional ways to navigate it – now along the Actions and Events dimensions too instead of just the state tree in the first version.
• Version 1.1 can duplicate events or actions, which helps when you've got several that are similar. Changes in the events and actions lists are reflected immediately on the main screen and on the block diagram (which solves the previous problem of deleting a renamed event or action when it's still in use).
• The Events and Actions List Editors are no longer modal and neither are the Events and Actions Usage screens, so you can have all the panels and the block diagram visible and move freely among them as you build your HSM (a good argument for an even larger monitor).
• When you save an HSM file, version 1.1 automatically adds the .hsm extension if you leave it out and it remembers the last directory you used.
• The Loaded VIs utility now can open and close block diagrams (if they are not protected with a password) and display only VIs with modal front panels, if desired—useful for quickly finding and closing accidentally opened (e.g., from the hierarchy window) modal VIs. Make a modal version of this utility and keep it on the Desktop for this purpose.
• A new example of a simple hierarchical state machine and two more excellent tutorials from Paul F. Sullivan (SULLutions.com) are included into the package. The tutorials are also available online. The overview article has also been extended.
As before, the LabHSM toolkit is available for UNLIMITED PERIOD trial. Please visit http://www.labhsm.com for details and download. The site also contains references which you may want to check to learn more about hierarchical state machines and active object computing.
Stanislav Rumega
NI Certified LabVIEW Developer
H View Labs
http://www.labhsm.com
[email protected]
US Toll-Free Phone/Fax: 877-570-8684

I am not really sure if Azure support this but its worth to make your configuration file to support .NET 4.0
$PShome\PowerShell_ISE.CONFIG and $PSHOME\PowerShell.exe.config will be not existing.
So you can make an entry in configuration to support .NET framework 4.0
like shown below
$config_text = @"
<?xml version="1.0"?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0.30319"/>
<supportedRuntime version="v2.0.50727"/>
</startup>
</configuration>
$config_text| Out-File $pshome\powershell.exe.config
$config_text| Out-File $pshome\powershell_ise.exe.config
Close PowerShell Console and open as administrator.
Try loading the modules back and let me know.
Regards Chen V [MCTS SharePoint 2010]

I download the new IOS7 in my iPad beeing in the usa And where I come back to my country appears me again to upad te my iPad of ferina the IOS 7. I did it my iPhone And is not working as before.what i must do

I download the new IOS7 in my iPad beeing in the usa And where I come back to my country appears me again to upad te my iPad of ferina the IOS 7. I did it my iPhone And is not working as before.what i must do

I'm sorry, but I do not understand what you are asking or saying. Perhaps you could clarify a little bit.

New BEE in the Mobile Development Farm

Similar Messages

Maybe you are looking for