New Behance problem with Lightroom 5.6

I have a problem with Behance and Lightroom 5.6. I have the wrong Adobe CC account linked to Behance and nothing I have done has fixed it. I believe it's a 5.6 bug. I do not have in the Lightroom Publishing Manager Under Behance account the option to log out. I mean it simply is not there not on the screen doesn't exist is invisible to the human eye. You ge the idea. Login is grayed out so it cannot be clicked on. and sign up does opens my browser and lets me sign in to either of my Adobe CC accounts but this does nothing for me. I believe this is simply a bug because I've seen a screen shot of publishing manager screen and in that screen shot it has logout, but now it's gone in 5.6. Is there a work around?
Matthiew
It is not this problem
Behance Plugin for LR not Authorizing in LR 5.6
I had that problem too, but I fixed it.

Try signing Lightroom out of your Creative Cloud account. Click on the Identity Plate and choose Sign-out.

Similar Messages

  • Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem net ti

    Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem next time it launches".  Except that it doesn't, I keep getting the same message and the program closes.  Does anyone know what I  can do to repair it?  Can't back up, can't do anything.

    There are dozens of threads in this forum that describe the fix

  • After years of never a problem with lightroom started with lightroom 5 yesterday and today all of a

    After years of never a problem with lightroom, yesterday i started wiith Lightroom 5 and today all of a sudden in development mode everything just stopped working. No matter what I do none of the sliders have any effect on the picture whatsoever.
    Please help Duncan

    you'll need both serial numbers to install the lr 5 upgrade.
    if you purchased and downloaded lr 4 from adobe or registered with adobe, you may be able to find your lr 4 serial number under the account used to make that purchase/registration (not necessarily your current adobe id), Adobe ID
    and adobe support may be able to help you, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • Exposure problem with Lightroom 4 CS5 and Raw 6.7

    Hi all
    I have recently upgraded from Lightroom 3.6 to the new Lightroom 4 and am genrally pretty happy with it, I tend to use it along with photoshop CS5 extended and also imagenomic Portraiture, but I have found an annoying little problem in doing this and something that I never suffered with when using Lightroom 3.6 and it is this...
    when I take an image from Lightroom 4 and click Edit image in Photoshop CS5 and then use Imageonmic to soften skin etc all seems to work well I then carry out any touching up within Photoshop and once finished save it back to lightroom for any final tweaks etc which is fine and all works smoothly, except once I have saved it back to Lightroom the exposure has been pushed up about 3-4 stops at least , meaning I then have to pull it down again and this can sometimes result in extra editing I could do with out. now I know its not the end of the world and is probably just a bug that I'm hoping will be sorted within Lightroom 4 but I just wondered if anyone else has had a similar problem, is it a bug or am I doing something wrong? (although I'm doing the same with Lighroom 4 as i used to do with LIghtroom 3.6 and that worked fine)
    Oh one more thing I should mention to get lightroom 4 and CS5 to work properly together I had to go into the Adobe Labs site and download the Camera RAW 6.7 software for CS5 so it could also be a bug here i guess.

    There have been several posts over on the Lightroom forum, and other non-Adobe forums also, about this issue: it seems that there's a bug in ACR 6.7RC which causes the image to be over-expose, compared with the setting applied using PV2012 in LR. I guess this is the kind of thing a Release Candidate is supposed to flag up! I was all set to upgrade my own ACR to ensure that PS would recognise my LR4 edits (I normally avoid RC versions and wait for the final), but all the reports of this problem have stopped me from doing so.
    In the meantime, best option so far as I'm aware is to process the image in LR (you get the option when you choose to edit in PS), meaning that it does all the rendering before passing it over to PS (otherwise, ACR handles the conversion of the raw file into TIFF). This does however mean that smart-objects and so on are temporarily out of the equation.
    I'm sure this will all be resolved pretty soon.
    Edit: in fact, one of the posts I mentioned is about ten posts down in this very forum: http://forums.adobe.com/thread/974963?tstart=0
    M

  • Printing layout problem with Lightroom CC 2015 Release

    Hello,
    I am working with the following configuration :
    MacBook Pro (15-inch, Mid 2010)
    OS X Yosemite Version 10.10.3
    Adobe Photoshop Lightroom CC 2015 Release
    EPSON Stylus Pro 3880
    I tried to print two images on a Super A3 paper sheet with an EPSON Stylus Pro 3880 directly from Lightroom and here is an example of what I expected (I resized and added a black border for better visibility on the forum):
    This is the preview I have in the printing module of Lightroom and this is also what I have when I print to a JPEG file with Lightroom.
    Sadly, after I launched the printing job, this is what came out of the printer:
    As we can see, the layout of the two pictures has been shifted toward the top of the paper sheet (cropping the top of the first image in the process) and about 30% of the right part of the layout has not been printed.
    Do you have any idea of what I am doing wrong here?
    For your information, I do not print very often so I am not 100% sure that I set everything correctly. However, I have been successfully printing in the past and it was with the same MacBook Pro on the same EPSON Stylus Pro 3880 printer but it was with OS X Yosemite Version 10.10.1 and with Lightroom 5.x (I cannot remember exactly which version).
    Moreover, because my print was urgent, I retried with a Windows machine running Lightroom 4.x with the same printer and it was a success. So I doubt that my initial settings on my MacBook Pro were wrong although I am not 100% sure.

    I am in France and I found out that EPSON is providing at least two different files for its v9.33 driver that relate to the Stylus Pro 3880 with OSX:
    epson16738.dmg: US version (https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=141552&prodoid =63085147&infoType=Downloads&d…)
    epson379436eu.dmg: French version (Support et téléchargements - Epson Stylus Pro 3880 - Epson)
    and I realize that I was using the US driver which.
    After few minutes of refection, I realized that the 3880 driver that I installed on my MacBook pro was the only piece that was present when my prints failed and absent when my prints succeeded. So I though it had found out the cause of my problems until I tried with the french driver (epson379436eu.dmg)...
    In the meantime Adobe has release of new version of lightroom so let me recap my new configuration:
    MacBook Pro (15-inch, Mid 2010)
    OS X Yosemite Version 10.10.3
    Adobe Photoshop Lightroom CC 2015.0.1 [ 1018573 ] (info available in Help menu > System info > Lightroom version)
    EPSON Stylus Pro 3880
    Epson driver v9.33 epson379436eu.dmg
    ... and the result of my test is ... nothing at all! Lightroom sends the the print job to the printer but nothing comes out of it.
    However, when I printed to a file from lightroom and then tried to print this file with OS X Preview on the Epson 3880, it worked perfectly.
    It also worked when I printed from Photoshop CC (2014.2.2).
    It also worked when I printed from Lightroom but with a different printed and driver (Canon MF8580Cdw).
    Therefore, among the five elements of my configuration cited above, there is none for which the printing job is always failing. It is hard to find out what is the faulty piece of software!

  • How can I resolve the major problems with Lightroom 5 on iMac 5k?

    There are many many bugs that have come up in Lightroom 5 on my new iMac 5k (OSX10.10.1 Yosemite) that are seriously challenging my productivity!
    A short list of the problems include: Huge slow-downs when navigating in the develop module, very slow and sometimes unresponsive crop tool, improper slider scaling when develop panel in resized (because it is far too narrow on retina screen), poor auto selection of spot removal tool, slow local adjustment brush tool, and overall slow load times of 1:1 previews. My 2011 iMac beats the maxed out 2014 5k iMac in almost every part of the develop module except for initial loading and export times. What the heck is going on?!
    These are just some of the problems with LR, there are many more issues with premiere pro and after effects...

    Well, many of my issues evaporated when i re-installed the most recent update 5.7.1 (by download rather than cc desktop updater). Cropping is finally fast, sliders are ok for scale as long as you don't change panel size while the application in running (if you do you must close and reopen LR for slider scaling to match panel scaling). There are still some issue that I will be reporting on, but will make do for now.
    This was a major retina 5k iMac compatibility update, even though its not really mentioned in the list of fixes

  • Serious color problems with Lightroom

    Hello,
    I purchased lightroom this week and I am having a serious problem importing images. I am using a new Macbook Pro with OS Snow leopard. My camera is a Canon 1ds Mark2.
    When I import files half of them have this awful deep orange cast over them.
    If you look at the thumbnails some of the frames are normal and then the next few turn orange, all shot within seconds of each other in the same place, no WB change on the camera or anything. What is this, a bug in Lightroom? I dont experience this problem with Photomechanic or Photoshop.

    It doesn't sound like you know what actually caused the problem. What happens if you 'delete' (i.e. remove from LR only) some of the previous "orange" pictures and try to reimport them into LR?
    I understand that you are new to Lightroom – Welcome aboard! Your first step after learning the basic controls in LR is to adjust your 'Camera Default Settings' in the Develop module to better suit your workflow. I suspect you are using your camera with 'Auto White Balance' (AWB) set, which is inappropriate for RAW file format. Reason: If your LR Develop module white balance control is set to anything other than 'As Shot,' then pictures shot under different color temperature lighting will take on different color casts (i.e. orange, blue). The controls you have in LR (White Balance eye dropper) can help you to better determine the white balance settings for a particular shoot, and easily apply them uniformally across multiple pictures. This will provide better results than using AWB on any camera!
    I use a ColorChecker Passport to create custom camera profile and white balance develop presets for 'Daylight,' 'Cloudy,' Tungsten,' etc. for each of my camera bodies. Therefore I never use 'As Shot' white balance setting, and never have this kind of problem. My default camera setting uses the ColorChecker custom 'Daylight' preset, which I can change to a different preset for any photo session that was not shot under normal daylight conditions. If you want good color control of your images, you should not rely on the 'Auto White Balance' setting on your camera (especially for JPEGs!). You don't need a ColorChecker to adjust your camera body's color temperature in LR, but it helps and also creates a full custom camera profile! I own three Canon camera bodies and they all produce slightly inacurrate white balance using LR's 'Daylight' white balance setting with high-noon sunny daylight pictures. I suggest you determine and create your own custom white balance settings in LR for daylight and then change your camera default to these settings. You can also create custom develop presets for Cloudy, Tungsten. etc., which can be applied to specific shooting sessions as a better "starting point" for white balance.
    Do a little research on using Lightroom's White Balance Eyedropper tool – Here's one link:
    http://help.adobe.com/en_US/Lightroom/3.0/Using/WS947672F1-AAB2-43de-9011-BDDECA05EC19.htm l

  • Problems with Lightroom 4.3

    I was having problems with my slide show in Lightroom 4.3 crashing. I read a lot of the questions and answers by a few people who are still having the same problems . I was however able to repair the permissions file by holding down the option key at start up and clicking on the arrow/hard drive . I also work from 2 screens. I disconnect the second monitor, sideshow worked . I connected it and it t did not work . Then I rebooted the computer and everything worked fine . I guess the key here is to reboot after you repair the permissions file .

    TO: Alon Ong. Thanks for the information. The German-MSI-Support writes:
    Sehr geehrte/r Uchrin Stefan,
    danke fuer Ihre Anfrage.
    Wenn sie die neuesten Treiber von der Nvidia seite installiert haben und die Karte nicht mit Ihren verwendeten Programm kommpatibel oder lauffähig ist, versuchen Sie die Karte bei Ihren händler (Kulanz des Händlers) einzutauschen.
    ggf versuchen Sie mal Vista ob der Fehler da auch besteht.
    Ihr MSI Tech. Support Team
    It is a joke - but I have changed the new NX 8600GTS - Card to my old GeForce 7600GS.
    Stefan

  • What is problem with Lightroom 5 slide show??

    This is a repeat question since it is impossible to get an answer from Adobe.  Possibly THE worst technical support of any product I have ever purchased!!  I upgraded to LR 5.  The slide show does not work.  I only get a black screen while the slides advance.  This was not a problem with LR4.  My saved slide shows do not work and new ones created in LR 5 don't work.  Adobe gave some ridiculous answer about the name  of the files with some sort of ID in them.  The answer made no sense.  I have changed nothing in my OS or my file structure.  Some people are experiencing this problem since there were several people posting the same issue.  Why can't we get a timely and credible answer from Adobe on this problem?  Anybody have a solution?  I went back to LR 4 and no issue with the saved slide shows.  Help please!!  LR 5.4 upgrade did not fix the problem either.
    Come on Adobe fix your very expensive software product that I paid cash for!!
    Thank you!
    MAC OS 10.7.5

    I posted this 8 months ago with NO responses.  Incompatibility of Lightroom 5 and Mac OS 10.7.5 on a MacPro. I bought Lightroom last week and struggled to get a slideshow to be exported. After many hours of testing I have concluded that the slideshow export delivers blank slides and blank video (though audio comes through) EXCEPT that the picture shows up during the transition ONLY. Please correct this problem. The problem does NOT occur on my MacBook Air with OS 10.8.5
    I saw Rob Cole's suggestion:  what can be corrected in either the monitor profile or video driver?

  • New RAM problems with my Dual G4 1.25 MDD

    Howdy I've had my Dual G4 1.25 MDD for 2 years and love it. I got it with 1GB RAM, thinking I was set. For Christmas I wanted to Upgrade the RAM to 2GB. from My PowerMac G4 Manual I knew I needed 2x 512MB PC2700 DDR333 CL2.5 SDRAM DIMM's.
    I went to DealRam (part of DealMac) and found 18004memory.com The price seemed great $39 per stick. I ordered it and within a week got 2x 512MB DIMM's. Problem was it was the Wrong RAM spec. I tried that RAM in my Mac 30 different ways and Everytime the computer either wouldn't boot, or it would suffer Kernel Protection Faults. One time it did boot up but the RAM only recognized as 2x 256MB DIMM's. I called the company, got an RMA and returned the RAM, this time they sent me 2 replacement DIMM's.... for a POWERBOOK, SO-DIMM's. I returned it again and finally Got from them the
    2x 512MB PC2700 DDR333 CL2.5 SDRAM DIMM's. They call it Hyperspeed RAM. Anywho, I powered down let the system cool over night and in the morning, popped it open, put the RAM in the 2 open slots DIMM2/J23 & DIMM3/J20. closed it back up and powered up. Everything was snappier, the boot was quicker and I checked About this Mac, it says 2GB. Apple System Profiler showed all 4 DIMM's and I thought everything was fine.
    Computer ran great for hours, no issues. Everything seemed quicker. Computer went to sleep overnight, next day woke from sleep and Tried to use iTunes and during an extensive sort for Songs, the system Locked up. Nothing would work. Had to force restart. this time I tried to Run my favorite online Game, WoW and after it loaded and I started to play, within 5 mins the whole game locked up. The audio sound went into a sort of Loop, I couldnt force quit and had to force reboot. This happened several times. I finally decided to Run the Apple Hardware Test. The Quick test locked up after running 2mins. I let it sit for 1hr just in case it was still doing something and the progress bar and time never progressed. So i forced reboot, ran Test again this time as Extended test. at 8 min & 31 sec the test stopped and I got an Error Code, this time I wrote it down "2MEM/2/4: DIMM3/J20."
    I guess that DIMM failed. I shutdown, popped open case, and removed DIMM3/J20 leaving the Original 1GB RAM and One of the 512MB Upgrades. I rstarted the Test again and Ran the Extended Test once more. It ran for 27mins & 24 secs and everything passed. So. 1.5GB is better than just 1GB. I powered down and powered back up to try and play WoW. Within 5 mins of loading game to play, everything locked up again.
    So I took both of the new RAM out and left the Original 1GB RAM and ran Test everything was great no Errors. Rebooted, and went onto WoW again and was able to play for several hours. I quit game and shut down for night.
    I have since Tried the 2x 512MB DIMM's in over 10 different variations in the computer with and without the original RAM and everytime I run a high end program or game (WoW, iTunes, and Photoshop), I get lock ups, crashes, and other screen weirdness.
    I dont want to have to Return the Memory again. I am already out over $15 from s/h with RMA's.
    PLEASE Any ideas what to do?
    1 thing I noticed the RAM gets very very hot, when I've powered down tand removed the new RAM. I wonder if there is a cooling issue?
    Anytime I put the Original 1GB RAM in, I dont have problems!

    Hi lz3broc,
    Sounds very much like faulty RAM to me, I'm afraid. I'm not sure about the temperature it's running at, but if the surrounding DIMMs aren't having a problem then I would definitely point the finger at those new memory sticks not being up to scratch.
    If you were convinced it was temperature related then you could always try putting heat spreaders on the memory to help with cooling, but as these stick (semi-permanently) to the RAM then you would never be able to return them.
    My personal opinion is that you should send the RAM back and buy two new DIMMs from Crucial Technology. I only ever buy RAM made by them and I've never had a problem with it - it's the same stuff Apple themselves generally use and works a charm every time. Probably not the news you wanted to hear, but that's probably the only way you're going to get a stable machine with 2GB RAM.
    Hope that helps,
    Andy.
    PowerMac G4 Dual 1.50GHz   Mac OS X (10.4.4)   Liquid Cooled

  • Problem with Lightroom and Epson Printer

    I'm suddenly having problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5, and have an Epson Photo Stylus R2400. I've been using this combination from the beginning with no problems. Now suddenly when I try to print I get an error message that says Media is out or not loaded correctly. Neither is the case. I have tried restarting my computer, the printer and everything else I can think of, but nothing works. I can print from any other application without problems, so I'm assuming it's an issue with Lightroom.
    Has anyone experienced anything similar? I was going to uninstall lightroom and do a reinstall but I can't find my installation disc. Now I'm at a loss to figure out what to do.
    Thanks,
    Craig

    Try deleting you prefs file and/or print templates.
    Lightroom is unique to many other programs in that it saves and restores printer settings. Some bad data may tried to be passes. A "fresh start" might help.

  • Problem with Lightroom and Infrared Photography

    This problem is specifically related to using LR & PS to process Infrared images. I apologize if this forum may not be the correct place to ask this question.  I am having problems processing Infrared Images when using LR & PS.  I take my IR images with a 530 IR conversion to a Canon G12 camera.  I learned early on Adobe products don't play well with IR images (they come in magenta when importing ) so I bring IR images shot withmy G12  into my computer with Canon Digital Photo Professional and then work in LR & PS from there. 
    If I then directly open this imported image from my hard drive into Photoshop and try and do adjustments such as blue sky adjustments with a red/blue channel swap, it works fine, just as I would expect.
    (If you are not familiar with IR processing, I understand this introduction and question will not make sense)
    But when using Lightroom, I sometimes have issues. I always import all my images into LR. Even with IR images, after using DPP to bring them to my computer, I import them into LR for cataloging purposes and to make other potential adjustments. Then my usual workflow is to move photos from LR to Photoshop via the "edit in" command. This opens a dialog box giving a choice of "edit a copy with LR adjustments" which is the default option and the one I always use, or "edit original".
    Here's the interesting thing I finally discovered.
    If I send the photo from LR to PS using the "edit a copy with Lightroom adjustments" option, I get a bad blue sky effect, where the sky is green and the foliage is pink instead of the sky being blue and the foliage yellow. But if I send it to PS using the "edit original" option, the blue sky effect works fine.
    So there appears to be an issue when tring to send IR images from Lightroom to Photoshop. Any thoughts?
    Thanks,
    Matthew Kraus

    Thanks so much for working on this.
    I fear the behavior you noticed was just due to the fact I cheanged the
    file from 16 bit to 8 bit so the size was smaller and I could easily email
    it.  When I open any of my regular 16 bit files, whether I send them to PS
    as "edit original" or "edit copy with lightroom adjustments", they both end
    up as 16 bit and as far as I can see, seem the same, though obviously they
    are not.
    I don't really have a preset, but I'll walk you through the process.
    1. Choose Channel Mixer from the Adjustment Pannel
    2. Make sure the output channel is red, change the red channel slider from
    100% to 0% and increase the blue channel slider from 0% to 100%.  You can
    type in the values.
    3. Change the output channel to blue.  Increase the red channel from 0% to
    100% and the blue channel from 100% to 0%.
    This is supposed to change the sky from brown to blue and the foliage from
    blue to yellow and is what happens when you use the "edit original"
    option.  When you use the "edit copy with lightroom adjustments", the sky
    turns green and the foliage pink.  So you get 2 different behaviors,
    depending on which option you use to bring the image from LR to PS.
    That's my question, why do you get 2 different behaviors?
    Thanks,
    Matthew Kraus

  • Problems with Lightroom 5.2 and Olympus EM-1 RAW files?

    There have been reports on DPREVIEW of color problems using Lightroom 5.2 with RAW files from the Olympus OM-D EM-1 camera.  This causes  difficulty creating camera profiles, and creates a red shift in Images.  JPG images are unaffected.
    Anyone else seeing this?
    When may we look forward to LR 5.3, hopefully with a fix?
    Thanks............... Jack Winberg

    The read me file from Adobe indicate that LR 5.2 has "preliminary" support for the Olympus EM-1 raw files.
    I would make sure you keep your original raw files so they can be converted when the support is finalized. i.e. I would not convert to dng on import if that is your normal workflow.

  • New air problem with battery after upgrade to 10.6.5

    Hi List.
    I bought new air about month ago. Everything was working like a charm.
    2 days ago I did macos upgrade and I have big problem with battery performance. Only 2 hours of working after full charging. I decided to downgrade system to 10.6.4 and problem's gone.
    Is there something wrong with 10.6.5 on new air?

    Hi,
    I dont think there is something wrong with 10.6.5 simply because I have no problem with it
    Since battery management is one of the SMCs, resetting it may solve the issue.
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    Welcome to Apple Discussions!
    Cheers.

  • Problems with Lightroom and Aperture

    Automatical file transfer doesn't work with Lightroom. File transfer starts, but in the end error report appears and no files are transferred. File transfer works manually and via Finder.
    There are also problems with Aperture. It crashes, when I try to view images in full screen mode.
    Waiting for an update...

    Hi Tim, I downloaded an update to Aperture and it works fine.
    However I sympathize with Lightroom. I have weird problems when quitting Photoshop CS3.
    Hmmmmmm

Maybe you are looking for