New Behringer x1204USB and Garageband user

So I recently purchased a Behringer x1204USB and have been watching tutorials for how to use it with GB.  So far I have a lot of it figured out, but I have a problem.  I'm trying to record a podcast with it, and I'd like to play sounds, bump music, etc. into the mixer from my laptap and have it loop back to my laptop from the mixer to record in GB. 
Right now I have the mixer inputting to the laptop via the USB, and an additional laptop-to-mixer connection in the form of having my headphone jack plugged into channels 5/6 through the use of adapters.  I'm not the most tech savvy, but it seems logical to me that sound will go out the headphone jack to the mixer, then come back into the laptop through the USB, like an electronic loop.  And I can hear that the sound from the laptop is getting into channels 5/6 through my headphones, which are attached to the mixer.  However, when I hit record on GB it won't pick up that sound at all.
On the other hand, when I unplug 5/6 from my laptop headphone jack and hook it up to an MP3 player instead it works fine getting the sound to GB for recording.
Am I doing something wrong?  I've played with the audio drivers a hundred times and probably experimented with every possible configuration.  I'm almost to the point of just going with the MP3 player, but the thing is I'd like to play in youtube videos to comment on sometimes and I can't do that with the MP3 player.
Any help would be awesome!

it sounds like you didn't turn on the line-in:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein

Similar Messages

  • When deploying the new CU4 x64 and x86 users see that the install is happening. How do I prevent them from seeing this?

    When deploying the new CU4 x64 and x86 users see that the install is happening. How do I prevent them from seeing this?
    Thanks
    James A+, Network+, MCP

    If the program settings are set to hidden, it should be hidden. You do not need to specify any client settings. If you changed the program settings and the machines already had policy, you will have to wait up to your 60 minute policy setting or just manually
    kick off a policy update to see the new hidden program.
    If they are still getting the interactive install, then you need to troubleshoot if the machine has gotten proper policy. Run a 'Machine policy retrieval and evaluation cycle' manually, wait a few minutes and then test again.
    Suppress program notifications are the tray icons and bubble notifications about installations happening. Hidden is the method in which the executable/msi will install.
    Daniel Ratliff | http://www.PotentEngineer.com |
    @PotentEngineer

  • Behringer BCF2000 and Garageband?

    Just picked up the Behringer BCF2000 and am having problems configuring the mixer or getting it to learn.
    The M-Audio iControl is supposed to be compatible with Logic Express now, and Logic Express works with the BCF2000. So, shouldn't there be a way for Garageband to work, or does it not send independent MIDI channels?
    I may be incorrect in assuming iControl works with Logic Express...might only be with Logic.
    Thanks in advance for any assistance.

    GarageBand doesn't "send" midi at all. And I think you can only record a single midi track at a time. I am not sure if this device works with GB or not. I am not familiar with it at all. If it requires send AND receive of midi then I suspect it won't.

  • New to logic and garageband, having trouble transferring files

    I recently bought a macbook so I'm just kinda figuring out garageband and logic express 7. I was trying to transfer some garageband files over to logic and I kept getting a message saying "damaged song or not a logic express song" Does anyone know why this may be happening and how to fix the problem?

    Check your version numbers - there are some 'gotchas' depending on the versions you're using.
    For example, LE 7.2.3 at a minimum is necessary to run on a new MacBook. However, if you have a latest version of GB (and you probably do, as it's included on new Macs), then IIRC, Logic 7.2.3 won't open GB 4.+ files - you'll need to upgrade to LE 8. There are some other incompatibilities too - if you could post your version numbers, you'll get some more specific help.

  • Bought a new iMac today and Garageband is not installed?

    So, I was told that my iMac would come installed with the Mountain Lion OS X installed. It's not. When I do a software update check it tells me that it's up to date. I was also told that my iMac would have Garageband and iMovie on it and that it would all be free. None of this is installed and when I look on the app store, everything costs between 15-20 dollars...each! So, I went ahead and purchased all of it, and it won't download! Can anyone tell me what to do?

    Welcome to Apple Communities
    You can install iLife and Mountain Lion free > http://www.apple.com/osx/uptodate To install it, open App Store > Purchases and accept iMovie, iPhoto and GarageBand

  • Brand new MBP and the user directory is corrupt?

    hi, i just installd my new MBP and did a sync of my G5 settings (all except bookmarks) added a few things to my desktop and when i rebooted the desktop was cleared and the home directory was missing "Movies" "Music" "Pictures" in the left most column. all that is left is "Applications" and my user home symbol.
    i tried to create a new user and when i did so was given a message that the "home" folder could not be located. weird.
    anyway. i also installed a canon IP4300 driver. can anyone tell me what may be going on? do i need to erase the drive and do a fresh install?
    UPDATE: i see what happened! the User directory somehow got into the Applications folder! no idea how. but i can't seem to get it out. can anyone help me out?
    thx
    Message was edited by: Frank Jacob

    Open the Applications folder and drag the Users folder inside to the top level of the hard disk; you may need to press the Command key when dragging the item and/or provide an administrator username and password. When done, log out and back in. If only the home folder is present in the Applications folder, move it to the Users folder. Rename existing items as needed.
    (25013)

  • Regarding the internet breech as seen on the news.  What advice is Apple giving to its computer, iPad, and phone users?

    Regarding the internet breech as seen on the news.  What advice is Apple giving to its computer, iPad, and phone users?

    That does not affect any OS X client or iOS, and there is no action for you or Apple to take.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.

  • How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.

    How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.
    When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial. 

    Hi I'd like to jump in here. Your app showed me this:
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
              Destinations:
                        Plastic Wrapper [Local] (Last used)
                        Total size: 999.86 GB
                        Total number of backups: 64
                        Oldest backup: 2013-07-24 23:25:11 +0000
                        Last backup: 2013-11-17 01:40:47 +0000
                        Size of backup disk: Too small
                                  Backup size 999.86 GB < (Disk used 453.81 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
              /sbin excluded from backup!
              /usr excluded from backup!
              /System excluded from backup!
              /bin excluded from backup!
              /private excluded from backup!
              /Library excluded from backup!
              /Applications excluded from backup!
    Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
    Thanks,
    Darcy

  • How can i add a new user and change user'password with javamail?

    how can i add a new user and change user'password from a mailserver with javamail?
    email:[email protected]

    Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
    if it is linux...u have to use some shell programming\
    bye for now let me know if this guides you or if you need some more stuff.
    bye

  • I am a new iPod shuffle 4th Generation user and I cannot sync the music in my Windows Media play to my new iPod, can someone help?

    I am a new iPod shuffle 4th Generation user and I cannot sync the music in my Windows Media play to my new iPod, can someone help?

    Hi Daisymae3,
    The iPod shuffle does not use Windows Media Player to sync, it uses Apple’s iTunes application, available for free from this web site -
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    See also the manual for your iPod shuffle -
    User Manual iPod shuffle
    manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User_Guide .pdf
    Specifically Chapter 3 - Setting up the iPod shuffle.
    iTunes is the free software application you use to set up, organize, and manage your content
    on iPod shuffle.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Hi guys, I have a problem with my new macbook pro 15". I tried to updtate the apps (iPhoto, iMovie and Garageband), but an error was displayed "You have updates available for other accounts". I don't have other accounts!!! :(

    Hi guys,
    I have a problem, I have a new macbook pro. I updated the software without problems; then I tried to update iPhoto, iMovie and Garageband, but an error was displayed "You have updates available for other accounts". I don't have any other account, i tried everything found on the net but nothing seems to work...Please help me!!!!

    Same thing for me it writes "To update this application, sign in to the account you used to purchase it."

  • HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

    I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

    I have the same problem.. EXACTLY. .  When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
    The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

  • I have just opened my brand new Macbook Pro and I'm a first time mac user. I have tried to download flash to enable me to watch you tube clips, but on trying to download it, it says I need to close Safari but after doing so, it still won't respond.

    I have just opened my brand new Macbook Pro and I'm a first time mac user. I have tried to download flash to enable me to watch youtube clips, but on trying to download it, it says I need to close Safari but after doing so, it still won't respond. Any tips? Help?

    Actually you need to quit Safari which is different from closing.  With Safari open go the menu bar for Safari/Quit Safari. 
    Mac 101:  Get Started Using A Mac 

  • I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ? or can you run both versions on OS10.9.5 ?

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ?
    thanks,

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

Maybe you are looking for