New beta profiles for D810

Adobe says the folder for installing the new beta profiles for Nikon D810 on Windows is 'C:\Users\[user name]\AppData\Roaming\Adobe\CameraRaw\CameraProfiles.
But I can only get as far as C:\Users\[user name]\Application Data - i.e. no folder named Roaming.
Solution?

Have you enabled the Viewing of all hidden folders in Windows?

Similar Messages

Creating a New Forecasting profile for MRP

Hi there,
Please can somebody let me know how do I create a new Forecasting profile for MRP.
I want to see this in table MRPR once created. (field PROPR).
Kind Regards,

Dear marelizen
Use transactio code MP80.
Creating a Profile
The information contained in this info object is relevant to the material master for industry and to the article master for retail. Retail customers are requested to substitute:
article for material
requirements planning for material requirements planning or MRP
1. In the Material Master menu, choose Profile ® MRP profile or Forecast profile ® Create.
The initial screen appears.
2. Enter the name you want to give the profile.
If you want to use an existing profile as a reference, enter its name under Copy from so that the system can copy its values to the new profile.
3. Choose Selection screen.
The selection screen appears. It shows all the fields that can be copied to the MRP or Forecasting screen in the material master record.
4. Enter a profile description and select the fields you want the profile to contain, specifying whether each field is to be copied to the material master record as a fixed value or as a default value.
It is not possible to select Fixed lot size and Maximum stock level in a single MRP profile. However, if you select Maximum stock level, you must also select Lot size (materials planning).5. Choose Data screen.
MRP profile data is spread over two screens. To switch from one screen to the other, choose Data screen 1 or Data screen 2.
When you access the data screen from the selection screen, the system checks whether the fields selected are allowed to appear in the same profile.
The data screen appears, containing only the fields you selected on the selection screen. The fixed values and default values are displayed in different colors. All fixed values are required fields except where the field can also be left blank.
If, in the forecast profile, you enter N or 0 as the forecast model, no forecast is made.
Like forecast model N, if you enter forecast model 0 when maintaining a forecast profile, you will be unable to maintain any other field in the profile.
Unlike forecast model N, forecast model 0 deletes any existing forecast values when you change the material. This ensures that these values are no longer included in materials planning.
6. Enter the corresponding values and save the profile.
If the system detects inconsistencies or errors, it asks you to change the fields selected on the selection screen and/or to correct the values. Otherwise, the initial screen appears, where you can begin to create another profile.
warm regards
Ramakrishna

Need Better Profiles for HP B9180

Hi all,
Like others, I find that my HP Photosmart Pro B9180 produces prints that are 20-30% darker than the image on my calibrated monitor. I am running CS3 on my Mac OSX Leopard system. I am trying to print on HP's Advanced Photo Glossy paper.
My color settings are along the lines of those recommended by Scott Kelby (Adobe RGB workspace and prolife; and I allow PS CS3 manage colors and not the printer).
I've experimented with other printer profiles provided by HP, but nothing delivers a good print. Has anyone found a good ICC profile that will work with this printer/paper combination?
Thanks, in advance, for any help you can offer.
Best,
Tracy S.

Ok, you caught the typo. I actually went back to his book to find the proper page citation to support my statement, until I realized you were having a bit of fun. Just so the record is clear, I have no knowledge as to whether Mr. Kelby is or is not prolife.
Anyway, on to your advice....
"You need to calibrate and profile your particular monitor, then use the resulting profile as your MONITOR PROFILE. (DEVICE DEPENDENT.)"
Did that, as I mentioned in my original post.
"Finally, your target profile has to be a specifically calibrated profile for the particular combination of paper, ink and printer. (DEVICE DEPENDENT)."
Yes, that is the essence of my message in which I am asking for assistance in locating a better ICC profile for my printer (HP B9180) and paper (HP Advanced Photo Glossy) combination. The stock ICC profile from HP is generating poor results. Short of printing off target sheets and sending out for a customized profile, I thought I would see if anyone else has tumbled to a better profile. Others have encountered a similar color and tonal shift in their prints using the same set up as me, so someone may be able to point me in the right direction.
Also, I did review the site to which you directed me. As Mr. Ballard points out:
"The problems users have with Photoshop, and color managed applications are:
1) They break the Color Management System CMS, by attempting to turn it off -- when in fact they can't!
See: Turn Color Management on And Honor my Embedded Profile, Please gballard.net
2) They have bad profiles...."
My problem is precisely the one he identifies as point (2) -- I have a bad output device profile and I wish to correct that.
Anyone out there with a good HP B9180/Advanced Photo Glossy ICC profile out there??
TS

New BETA drivers for TV@nywhere Master

there was a thread somewhere before where someone had found some updated BETA drivers for the MSI TV@nywhere Master card but it seems to have gone now
i've been using them for a while now, and they're very stable, and the picture quality has improved somewhat
they say they are for the Master version of the card, but i think they may work on the Mega PC version, the only difference is the Master has a AM/FM tuner as well
anyone having stability probs in media center III or MSIPVS might want to try them out and see what happens...
i've uploaded them to my webspace, and you can find them here in ZIP format: http://www.ukshazam.com/downloads/8606Master_drv.zip
please note these are BETA drivers and as such MSI won't support them (as if they do anyway
i'll also post this in the Mega PC forum

As I recall when this BETA driver started flying around the forum, they WERE NOT official or unofficial MSI drivers. They were modified by a user from another forum and someone from this forum posted a link to them. THESE ARE IN NO WAY RELATED TO MSI DIRECTLY!! Someone reversed engineered the driver and probly thru extensive testing, via trial and error, was able to clean up the driver to give the result that most have had with them. This doesn't mean that everyone is going to have the same result, which is and has been the reality with any add-on card produced since PC's came out...compatibility issues DO still exist out there and not all systems are going to play in the sandbox well with all add-on cards that are manufactured...something to keep in mind when purchasing new systems...
Furthermore, it's been my experience that proprietary systems (The Pac-10 as I call them...IBM, Dell, Gateway, HP, Compaq, Sony, eMachine, etc...) have more issues than White Box systems when it comes to add-on compatibility. If you don't know this already, most of these companies DO NOT want you to purchase off the shelf items from Best Buy, CompUSA, etc...they want you to have to come back to them for upgrades and add-on devices, at higher than retail prices, and that's where they make the most profit. Sad reality, but true. Case in point: My first retail purchased PC was a Dell XPS Pentium 100, (my prior PC's were purchased from Michael Dell's garage) I wanted to upgrade it to a 4X CDROM drive and Dell had failed to include the snap in side rails for their new innovative case that was tool-less. So I called up Dell support and asked if these rails were available. The CS Rep told me that they were so I asked how much. She asked me if I had bought the upgraded device from Dell and I said no. Then she informed me that they wouldn't sell them to me ($6.00 US) because I hadn't purchased the upgrade device from them. Needless to say I was pissed. This was circa 1995-96.
Anyway, over the years of doing network consulting, I can't tell you the countless times that I've heard this type of thing on the phone from many of the above listed companies...yes, most have gotten better over the years (Like Dell including all of the rails needed inside the case nowadays) but overall they still have the same mindset and it's much more subtle when they design a motherboard that won't play in the sandbox well with retail bought components...*shrugs*
I got tired of playing their game after a while and started building my own systems. I found White Box isn't always better either but for the most part it's been a far cry easier than buying proprietary...
Just my 2 cents here for what it's worth...

New Palm Profile for Used Palm Pre

Hi,
I bought a second-hand Palm Pre (Movistar, ES) and now want to establish a new Palm Profile so I can use the phone in Australia (Optus, AU).
How do I set up a new Palm Profile on this phone ?
It is currently running WebOS 1.4
Thanks,
Nick
This question was solved.
View Solution.

Hi,
I wiped the device and started from scratch and couldn't get past the Insert SIM etc screen.
When I restarted the device, it then locked in Seting Language.
I have now gone back to WebOS 1.3.5.2 using a Meta-Doctor hack, and can run the device, use phone etc.
When I ran the First Use App, it asked for my language then did a reboot, and still not Palm Profile.
Is there a Palm website where I can set up a profile, and the use my ESN to get Palm to send the info to my phone ?
I also tried using root-based program to force a profile creation:
luna-send -n 1 palm://com.palm.accountservices/createNovaAccount {\"password\":\"YOURPASSWORD\",\"email\":\"[email protected]\",\"firstName\":\"YOURFIRSTNAME\",\"lastName\":\"YOURLASTNAME\",\"language\":\"en\",\"country\":\"gb\",\"questionId\":\"2\",\"response\":\"FIRSTCAR\"}
This came back with ACCOUNT_CREATION_ERROR "Could not get account server url"
Any help appreciated, as I want to download proper Palm Apps, as well as the Homebrew Apps.
Thanks,
Nick

I have setup a new user profile for myself on my wife's mac. If i authorise it for my content will it remove my wife's authorisation.

I have set up a separate user profile for myself on my wife's MacBook Air.
If i authorise this Mac for my content for home sharing, will this remove my wife's authorisation.

Shared iMac, different users, different iTunes accounts - 90 day hold???

Use Palm Pre Profile or Create New HP Profile for Touchpad?

I have a Pre+ and using my original Palm Profile for backups, etc. When my Touchpad arrives, should I use my original Pre Profile or create a separate HP Profile?
What are the advantages and disadvantages of using the same profile for both devices?
Post relates to: HP TouchPad (WiFi)

ivanetter wrote:
I have the Palm Pre2 and the HP Touchpad. I set up the touchpad first, created the webOS account using yahoo mail address. When I received my Palm Pre2, I created the palm profile using the same email address.
The first connect of the two, a few apps that I installed on my touchpad synced onto my palm. Now, I cannot get this to happen again.
Also, on my Palm Pre 2, the phone came with a palm profile already on it...Dr. Skipped Firstuse...how do I delete this and where did it come from?
Unless I am mistaken, the sync of apps between the devices only happens one time: when the device is first brought online and into the webOS Account.
Not sure what you mean by Dr. Skipped Firstuse. Could you give us a screenshot? To take a screenie press at the same time: Orange (may be White on your phone), Sym and P keys.

Latest Update: New Camera Profiles for the D700 (Version 4)

I see with the latest update of Lightroom brought with it version 4 of the camera profiles. I've dabbled with using several of them, especially the Camera Portrait. I have versions that consist of for example:
Camera Portrait
Camera Portrait beta 2
Camera Portrait v3
Camera Portrait v4
Of course, the previous versions can be left as is however the list I have now is quite long and wanted to know if I would be missing out if I were to discard/delete previous versions and just keep the v4's.
I realize this is personal preference however are the newest versions (version 4) for Camera D2X, Camera Landsape, Camera Neutral, Camera Portrait, Camera Standard and Camera Vivid for the D700 all one needs for the average Lightroom user?
Thanks in advance.

Thank you all for giving me your advice. Like kbkbn said, the older versions don't do anything by being there and you never know if you want to use one of them in the future. I will start using the version 4 profiles and compare them more to the older versions. Thanks again.
Are there any other worthwhile sources of profiles? I do have a few I created myself with my Color Checker Passport for specific shooting locations in my yard for specific times of days.
Thanks again.

Are new beta drivers for XP and Xfi fatal1ty any go

Can you share your feelings about the new xfi beta drivers with a fatalty card? I've experienced they are better in terms of stability, but find that games are almost now missing sounds. Weird I know, but it's almost like I am not getting full 32 voice capability. The current drivers Creative offers are ok, but I find that any problems I have had with my system lately always come down to a Xfi driver component.
Anyhow, appreciate your experiences with them...

Well for me I managed to stop it from reverting back to 2. in the Creative Volume Panel by unchecking Syncronize with Control Panel option.
Seems that the problem with what you were mentioning is related to Sounds and Audio Devices, when I did have Creatives Volume Panel Syncronised with Control Panel, when I was playing certian games, it would end up reverting to 2. (which I found annoying) but since I did the above I have had no more issues since

New Nikon D3, D300, and D700 "Camera" v3 beta profiles

Hi everyone,
I have posted a zip file containing updated "Camera" color profiles (Camera Standard, Camera Neutral, etc.) for the Nikon D3, Nikon D300, and Nikon D700. The zip file contains a copy of the readme, but I'll post it here for convenience, too:
For lack of a better name, I am calling these "v3" beta profiles.
BETA RELEASE NOTES
Overview
These updated Camera v3 beta profiles for the Nikon D3, Nikon D300, and Nikon D700 are designed to reduce banding and highlight color artifacts. They also address the "too bright" tone curve issues with the previous "v2" version of the D3 and D700 profiles.
IMPORTANT NOTE: When using these v3 beta profiles, if you wish to match the default tonality of Nikon's Picture Controls (e.g., match View NX / Capture NX), you must set the Exposure slider in Camera Raw / Lightroom to -0.5.
Of course, feel free to adjust Exposure to make your image brighter or darker as you like. But in terms of matching Nikon's default tonality, you must set the Exposure slider to -0.5, or the default will be too bright.
For workflow convenience, you can use presets in Camera Raw / Lightroom to take care of both (e.g., simultaneously set the profile to "Camera Standard" and set Exposure to -0.5).
Installation
If you are on Mac OS X, drag the "Camera v3 beta" folder to:
    /Library/Application Support/Adobe/CameraRaw/CameraProfiles
If you are on Windows XP, drag the "Camera v3 beta" folder to:
    C:\Documents and Settings\All Users\Application Data\Adobe\CameraRaw\CameraProfiles
If you are on Windows Vista or Windows 7, drag the "Camera v3 beta" folder to:
    C:\ProgramData\Adobe\CameraRaw\CameraProfiles
Note that the above path on Windows Vista and Windows 7 may be hidden by default. Check your folder settings.
Feedback
The profiles are currently in beta status. Please provide feedback via the online Adobe user-to-user forums here:
http://forums.adobe.com/community/cameraraw
http://forums.adobe.com/community/lightroom
Thank you!

Vit Novak wrote:
It's because ACR assumes that exposure slider at 0 actually means exposure correction of +0.5 EV for this camera model, so with expsure slider at 0, upper 0.5 EV of histogram is clipped
If this bothers you, there is a workaround - convert NEF to DNG, then change BaselineExposure tag in a dng from 0.5 to 0. There are several utilities for this
Or wait for some future version of ACR where this will be solved
The BaselineExposure used by the DNG spec and ACR can complicate ETTR exposure. A uniformly lit surface, when exposed as determined by the standard ISO light meter, should result in 0.18/sqrt(2) or 12.7% saturation of the sensor according to the ISO 12232 saturation standard. This is the standard used by DXO and it allows 0.5 EV highlight headroom. For ETTR exposure, no (or minimum) headroom is desired and mid-gray (18% reflection) is 2.5 stops below 100%.
For example, I exposed a gray card according to the camera light meter reading with the Nikon D3. The resulting 12 bit data number was 497 and the saturation is 497/4095 = 12.1 % saturation, which is very close to the expected value of 12.7%, confirming that the light meter and sensor are properly calibrated. The corresponding pixel value in 8 bit sRGB is 99.8 as shown.
The raw file can be rendered into sRGB with in camera processing or Nikon NX2, which closely approximates in camera processing. With the Standard Picture Control, the camera sRGB value is 150. This is a hot tone curve and the a highlight with 100% reflectance would be clipped. The table below shows the results with ACR and various presets. If one uses the Adobe Standard camera profile, the sRGB value is 162 rather than the expected 99.8 Other combinations are shown. To get the proper value for mid-gray one must use a linear tone curve (sliders on main tab set to zero and a linear point curve) and an exposure correction of -0.5 EV to compensate for the +0.5 EV BaselineExposure. With no exposure correction and a linear TRC, the sRGB value would be 116, very close to the calculated sRGB value of 117 for mid-gray (18%). However, the linear TRC gives a flat appearing image.
The take home point is that if you use Adobe Standard with no exposure compensation with ETTR, your images will appear overexposed and lead to cutting back on the camera expoure. The raw file highlights will have values well under sensor saturation.

Can I make a new itunes account for my daughters ipod but not clear out my itunes

We only have one computer now and I want my daughter to be able to use and upload to her computer without affecting my itunes music, what do I need to do? and can this be done?

Create two Windows User profile, one for you and one for your daughter so that each of you will maintain your own itunes library and iTunes account. You already have yours in the computer, you just need to add a new user profile for your daughter. Go to Control Panel/Users to add a user account (make sure it is Administrator account and not Standard account).
Refer to this article for info:
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495

Use old domain controller AD user profile with new domain (profile changed)

Dear All,
I have built Win Server 2012 for Domain migration from Windows Server 2003 to Windows Server 2012. I have tested all thing on VMware including user creation and tested Domain join using power shell for Win 7 and .VBs batch file for Win XP computers all thing
are working fine.
Let 1st I introduce my current environment. I have existing Win Server 2003 domain controller (abc.com) with 130 client computers and 200 users I am going to plan migrate my current environment to Win server 2012 Domain (xyz.com) Keep in mind that Domain
name is changed but Domain Controller (Server) names are same i.e MY-PDC . I have tested domain join on multiple computers using existing clone of client computers and create all existing users using .csv file and power shell with required
credentials and OU.I am facing the user profile issue when I join domain and login with existing user which was previously the user of same computer the required profile does not login and computer creates new user profile in Document and Settings section
of Win XP.
I need your expert opinions because copy old profile data and create new outlook profile for each user is a big headache for any one. Hope you people can understand and help me in this issue.
Please provide best answer and result on priority I will be thankful to all of you.
Regards,
Arsalan

Hi Arsalan,
Please check if USMT can help you to achieve this target.
User State Migration Tool 4.0 User's
Guide
Meanwhile, please also refer to following articles and check if can help you.
How
to Migrate Windows User Profile to New Account
Keeping user old domain profile
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If anything I misunderstand or any update, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu

How do I create a new lens profile?

How do I creat a new lens profile for a Canon EF135mm f/2 and EF200 f/2.8 in lightroom 3.3?

Hi Simon,
Thanks for your reply. I figured it out, I downloaded the new version of Raw 6.3 and now I have the lens profile and others such as crop constraint and
chromatic abrerrations. I was looking for these items in Photoshop Raw
Thanks,
Aideen
If I understand you correctly, you found and downloaded a lens profile that matches your camera and lens, and you don't see the profile in LR?
1. Make sure that you relaunch LR after you downloaded the lens profiles.
2. The type of lens profiles (raw or non-raw) matches your image type (raw or non-raw). Namely you can only apply raw lens profiles to raw image files and vice versa for the non-raw profiles.
-Simon
>

Outlook prompts creds after migration, unless new windows profile created

HI!
Outlook keeps prompting credentials after migration for some users. When we create new windows profile for this user, all going well. Autodiscover in browser also keeps prompting for password.
I checked credential manager (there are no passwords stored), also tried new outlook profile (no help).
Any ideas?

2010 SP2 migrated to 2010 SP3. We already tried changing authentications. The problem occurs for random users (not all users). Auth settings on autodiscover virtual directory: Anonymous, Windows, Basic. Auth on exchange (get-autodiscovervirtualdirectory):
Basic, NTLM, WindowsINtegrated.
Also i did not mention early - the problem obviously with autodiscover. I can't get autodiscover.xml using browser (keeps prompting for credentials). From another winows profile on the same computer with the same mailbox all going well. So I don't understand
where should I look to.

Beta Firmware for RG45GS

Hi peeps,
I am a technical Journalist from South Africa and have been using this product for a while now. Apart from the lack of certain feauters (I felt) mine also froze at random times. So being in the press I spoke to some people and one of the technical guys at MSI gave me the new Beta Bios for the RG45GS. I just installed it and I am happy to report that there are some nifty extra features. I have not been able to see if it cleared up my problem yet but I thought I should share this file with other to see if it helps them.
Please post here your feelings about this firmware and whether it solved your problems. Your input is much appreciated.
"While upgrading, don’t turn off the power or unplug the Ethernet cable. The process will take about 1 minute."
http://pcstuff.co.za/msi/rg54gs_combo.gzh'
Enjoy

Beautiful. This upgrade fixed my PPPOE connection problem.
I am now much, much happier.
I was a little apprehensive to apply an upgrade not from MSI. Still the RG54GS allows you to recover from a bad upgrade back to the original firmware (see the manual) to I decided to try this.
The first thing I saw was no PING/PONG on the ADSL modem lights when the PPPOE connection was enabled. The second thing was "connected" in the status page. Never seen that before, despite getting PPPOE init OK in the log messages.
More options on the PPPOE connection setup.
MTU length setting.
DNS specification.
Much, Much happier. I just wish MSI would own up to the original problems, drop in here and say "we are working on it". Getting stuff that doesn't work does not make one happy.

New beta profiles for D810

Similar Messages

Maybe you are looking for