New BH-905i on N96 fades every 11s the music for 1...

Yesterday I received my new BH-905i (the batteries were fully charged overnight) which was easy to pair with my N96 (SW 30.033.098.1). But when listening to music from my 8GB microSD, the sound fades completly every 11s for 1s and then comes back for 11s to do the same on and on. This does not happen when listening wired. Also streaming the same music from N96 through Blutooth in my car works with no problems. Is the new BH-905i defect or is this a known problem?

If the headset appears to be faulty (and it does) either return it for repair/replacement or ask for a refund. I've heard nothing but good reports about it and would assume your headset is faulty !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

    Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

    This could be a complicated problem to solve, as there are several possible causes for it.
    Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
    Step 1
    From the menu bar, select
               ▹ System Preferences... ▹ Date & Time
    Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
    Check the box marked 
              Set date and time automatically
    if it's not already checked, and select one of the Apple time servers from the menu next to it.
    Step 2
    Start up in safe mode and log in to the account with the problem.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
    Step 3
    Triple-click anywhere in the line below on this page to select it:
    /System/Library/Keychains/SystemCACertificates.keychain
    Right-click or control-click the highlighted line and select
              Services ▹ Show Info
    from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
    Repeat with this line:
    /System/Library/Keychains/SystemRootCertificates.keychain
    If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
    Step 4
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
    In the Keychains list, there should be items named System and System Roots. If not, select
              File ▹ Add Keychain
    from the menu bar and add the following items:
    /Library/Keychains/System.keychain
    /System/Library/Keychains/SystemRootCertificates.keychain
    Open the View menu in the menu bar. If one of the items in the menu is
              Show Expired Certificates
    select it. Otherwise it will show
              Hide Expired Certificates
    which is what you want.
    From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
              Secure Sockets Layer (SSL)
    select
              no value specified
    Close the inspection window. You'll be prompted for your administrator password to update the settings.
    Now open the same inspection window again, and select
              When using this certificate: Use System Defaults
    Save the change in the same way as before.
    Revert all the certificates with non-default trust settings. Never again change any of those settings.
    Step 5
    Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
    Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
              Help ▹ Keychain Access Help
    from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
    Step 6
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL.
    Step 7
    Triple-click anywhere in the line of text below on this page to select it:
    /var/db/crls
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
    Restart the computer, empty the Trash, and test.
    Step 8
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in the same way you launched Keychain Access.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    fe80::1%lo0                    localhost
    If that's not what you see, post the contents of the window.

  • I have an Ipod touch that was used on one computer but the computer got a virus and crashed and got rid of everything. I have a new computer now so how do I transfer the music from the Ipod touch to the itunes on the new computer without losing the music

    I have an Ipod touch that was recognized as its host on one computer but the computer got a viruse and crashed and got rid of everying. I have a new computer with itunes now, so how do I have the ipod touch recognize this computer as its host computer without losing all of the music I have on the ipod touch?

    I have an Ipod touch that was used on one computer but the computer got a virus and crashed and got rid of everything. I have a new computer now so how do I transfer the music from the Ipod touch to the itunes on the new computer without losing the music

  • TS3274 my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the original one was not there.... some songs were in fact there but not clickable ( it was there only gray)..anyone kno

    my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad

    my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad

  • I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music

    Hi I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music. Home sharing is not working. How do I successfully transfer and sync the music off my ipone 4 to my mac book pro if they have different Apple IDs? Thanks!

    What do you mean the PC won't let you transfer the music? Save your entire iTunes folder (this is assuming that you have all your music stored in your iTunes folder) to an external hard drive. Connect that hard drive to your Mac. Copy the iTunes folder to your computer. Hold down the option key while launching iTunes on your Mac. Select the library you just copied when it ask you to select which library you want to open.

  • I am interested in purchasing a new PC and wanted to transfer all of the music on my Itunes onto my new computer's Itunes the easiest was possible. Any suggestions?

    I am interested in purchasing a new PC and wanted to transfer all of the music on my Itunes onto my new computer's Itunes the easiest was possible. Any suggestions?

    These are two possible approaches that should work to move the existing library to the new laptop.
    Method 1
    Backup the library with this User Tip.
    Restore the backup to your new computer using the same tool used to back it up.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase are reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Should you be in the unfortunate position where you are no longer able to access your library or a backup of it then see Recover your iTunes library from your iPod or iOS device.
    tt2

  • My laptop crashed and I had to get a new hard drive.  How do I get the music from my Ipod back into my itunes library?

    My laptop crashed and I had to get a new hard drive.  How do I get the music from my iPod back into iTunes Library?

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • I have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???

    i have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your Mac and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    Once you have successfully done that you can go ahead and choose Erase and Sync when you plug your iPod in.
    B-rock

  • I just purchased a new macbookpro and I would like to put the music from my iphone to my macbook.  I have downloaded from iTunes, however it want to add ALL music to my macbook.

    I just purchased a new macbookpro and I would like to put the music from my iphone to my macbook.  I have downloaded from iTunes, however it want to add ALL music to my macbook.

    When you plug in the iPhone, go to the menu bar and select "Transfer all purchases" to move them to your MacBook Pro.
    If that doesn't work. Go here for a whole list of Apps that can help you.
    I personally like Music Rescue the most.  You can get it here and use the License Key that they give out for FREE now.

  • My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

    My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

    Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

  • I am trying to sync my music library to my new iPhone 5C and cannote seem to get the music to sync.  It is in the library but isn't going over to my phone.

    I am trying to sync my music library to my new iPhone 5C and cannot seem to get the music to sync.  It is in the library but isn't going over to my phone.
    I must be doing something wrong during the sync (something checked when it should not bet, etc)  Need some help.  Thanks!!

    Manually manage music is NOT checked.  I backed up all my phone information from my old 3GS phone to my computer, then connected my new phone to sync.  Everything else seems ok but music won't transfer.  It is set to automatically sync when connected.

  • I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

    I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

    It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
    OK then Apply.
    This prevents your Mac from searching for your previous network which will no longer exist.
    A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
    Select it. AirPort Utility will load and walk you through its configuration.
    Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility.

  • If i download a newer version of itunes will i lose all the music from my old version?

    if i download a newer version of itunes will i lose all the music from my old version?

    No.
    Always backup your iTunes purchases...
    iTunes: Back up your iTunes library by copying to an external hard drive
    How to back up your media in iTunes

  • HT1420 One of my computers had to re install and now I need to authorize my new computer but keep telling me I reached the limit for 5 computers. What do I do?

    One of my computers had to re install and now I need to authorize my new computer but keep telling me I reached the limit for 5 computers. What do I do?

    I have the same problem. What load of BS.
    I feel so sorry for people that switched over from PC to mac because they were misled to believe that 'macs just work'.
    Imagine someone without a degree in patience and computer engineering ever being able to work this problem out.
    All I want to do it sync my iPad with some movies that I bought. NOPE I have apparently authorized more than 5 computers which is ridiculous because I own.... 1 computer. LOL.
    Really bored with Apple's paranoia, ego and illogical control.

  • I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password.  Therefore I cannot reset the password.  I hav created a new Adobe account so how do I get the subscription for ExportPDF m

    I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password.  Therefore I cannot reset the password.  I have created a new Adobe account so how do I get the subscription for ExportPDF moved to the new account?

    Hi lgmmo,
    I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
    A quick Chat session should get you fixed up.
    Please let us know if you have additional questions.
    Best,
    Sara

Maybe you are looking for

  • Ora-06502:pl/sql and ora-06512 at sys.owa_util errors

    Greetings - I have just installed APEX 2.2 in my 9.2.0.7 database and am going through the exercises in the "2 Day+ Application Express Developer's Guide." I was making good progress, until I got to Chapter 5, How to Control Form Layout. I created th

  • Kernel panic macbook pro 15 late 2013

    Hello I have a Macbook Pro 15, late 2013 Retina, and I found in the last month on two occasions with unexpected blockage in my computer, grey, restart and subsequent error message screen. In none of the two occasions I was performing tasks that deman

  • CUID in Export and Import Options in Business View Manager

    Post Author: palm CA Forum: Crystal Reports I am trying to import BV from one environment to another, i am using export and import option in the BVM ,every time when i make a change in BV in one environment , how can i make the changes in other envi

  • Validations in Web Dynpro FITE_VC_GENERAL_DATA

    Dear Experts. I need do a validations in the Web Dynpro FITE_VC_GENERAL_DATA, in where the value of field Costes estimados is the same that I put in the field  Anticipos. I want put the same value of the field Anticipos in the field Costes estimados.

  • Internet Explorer 10 / 11 Advanced Tab settings not being completely applied

    I am trying to enforce settings for the Advanced Tab in IE10 / 11 in our environment.  I have one GPO applying these settings, with no other GPOs that are going to interfere.  RSOP shows the policy is being applied, and I can even test it by changing