New BIOS 1.2 working well?

Hi
New BIOS 1.2 working well?.. Which brave souls have tried it?
Please post your experience here
**********UPDATE****************
DO NOT USE THIS BIOS or this LINK. I made a mistake thinking this was a BIOS to my A64 MOBO. I'm sorry for the inconvenience I have caused.
The site has been giving me SQL errors and I had to go through a "backdoor" to get this page and unknowingly I was on the P4 VIA chipset download page.
Today the SQL errors have been fixed so I just hope no one has made any changes they can't recover from
I'm deleting my post further down this thread.
Simon

DONT USE THIS BIOS FLASH if anyone notices at the top of that page it says PT8 Neo Series PENTIUM do not flash

Similar Messages

I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?

I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?

Thanks planb77. Your instructions worked but I had to do a little more than you stated. I did not realize that transferring files to a new computer was not enough. When the iPod synced I was told I needed to "authorize" my new computer to get my iTunes purchases to sync to the iPod. So after the initial sync, I ejected and disconnected the iPod, went into the iTunes store, set up "home sharing" and then authorized the new computer. When that was done I reconnected the iPod and was able to sync all my books and music. The only thing I couldn't do was rename the iPod as iTunes never asked me to. Is there a way to rename it after it has been set by iTunes as "owner's iPod"?

MSI give us a new bios that will work

Why dont you release a new bios the latest one is dated 15/8 thats 2 MONTH now. Corecenter make other program lockup, max Vcore is 1.5volt no matter what I set it in bios and corecenter (And I'm not the only one that have this problem), Where is the Agp/pci lock that you promised to release in 2 weeks for 2 weeks ago? Lucky me that I bought an k8v also because this bord aint gono OC anything with a Vcore that stuck on 1.5 volt.

I think asking for a new BIOS that will "work" is a misleading.. The one the board ships with is working perfectly except for those who overclock. Challange MSI to give you a real OCers beta BIOS this thread here might give some people the impression that the boards don't work at all when they work just great.
Simon

NEW iPad 3G Not Working well in Singapore

I tested the 3G on my new iPad against iPhone 4 - The 3G is just NOT working on iPad.
I tested in more than 10 locations - home, work place and others. In many areas, the 3G is working well on iPhone 4, whereas it is non-existance or slow like a snail on the new iPad.
Please fix this Apple! Thank you.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

The new safari is not working well

I have safari Version 4.1.1
before i updated to this version I can surf fast but recently after the new updates while surfing it takes too long for the page to open the site and if it takes too long it will say failed to open the page and cannot find server
even firefox have the same problem but before these updates i was able to surf the net normaly
every computer in my house is working good so it is not from my modem or the verizon
Thank You

sorry but i did not understand you well
my remaining space is 2.88 GB
and
these are the plugins in my safari
DivX Web Player
DivX Web Player version 2.0.2.39 — from file “DivXBrowserPlugin.plugin”.
MIME Type Description Extensions
video/divx DivX Video File divx,div
Flip4Mac Windows Media Plugin 2.3.4
The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime. — from file “Flip4Mac WMV Plugin.plugin”.
MIME Type Description Extensions
video/x-ms-wm Windows Media Video wm
video/x-ms-asf-plugin Windows Media Plugin
video/x-ms-asf Windows Media Video asf
audio/x-ms-wax Windows Media Playlist wax
application/asx Windows Media Plugin
video/x-ms-asx Windows Media Playlist asx
video/x-ms-wmv Windows Media Video wmv
application/x-mplayer2 Windows Media Plugin
video/x-ms-wmp Windows Media Video wmp
video/x-ms-wmx Windows Media Playlist wmx
audio/x-ms-wma Windows Media Audio wma
video/x-ms-wvx Windows Media Playlist wvx
Flip4Mac Windows Media Web Plugin 2.3.4
The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime. — from file “Flip4Mac WMV Plugin.webplugin”.
MIME Type Description Extensions
video/x-ms-wm Windows Media Video wm
video/x-ms-asf-plugin Windows Media Plugin
video/x-ms-asf Windows Media Video asf
audio/x-ms-wax Windows Media Playlist wax
application/asx Windows Media Plugin
video/x-ms-asx Windows Media Playlist asx
video/x-ms-wmv Windows Media Video wmv
application/x-mplayer2 Windows Media Plugin
video/x-ms-wmp Windows Media Video wmp
video/x-ms-wmx Windows Media Playlist wmx
audio/x-ms-wma Windows Media Audio wma
video/x-ms-wvx Windows Media Playlist wvx
iPhotoPhotocast
iPhoto6 — from file “iPhotoPhotocast.plugin”.
MIME Type Description Extensions
application/photo iPhoto 600
Java Plug-in for Cocoa
Java Switchable Plug-in (Cocoa) — from file “JavaPluginCocoa.bundle”.
MIME Type Description Extensions
application/x-java-jnlp-file JNLP Applications jnlp
application/x-java-applet Basic Java Applets javaapplet
Kaplan Netscape Plug-In
Kaplan Netscape simple plug-in — from file “KaplanNetscapePlugIn.plugin”.
MIME Type Description Extensions
application/x-kaplanbrowser Kaplan Nestcape Plug-in kapb
Kaplan WebKit Plug-in
Kaplan WebKit plug-in that enables calls JavaScript from an Objective-C plug-in (and vice versa). — from file “KaplanWebKitPlugin.webplugin”.
MIME Type Description Extensions
application/x-kaplanbrowser Kaplan WebKit Plug-in kapb
MoveNetworks Quantum Media Player
npmnqmp 071701000001 — from file “Move-Media-Player.plugin”.
MIME Type Description Extensions
application/x-vnd.movenetworks.qm MoveNetworks Move Media Player Plug-In qmx
application/x-vnd.moveplay1.qm MoveNetworks Move Media Player Plug-In qmx
Quartz Composer Plug-In
Web Kit plug-in that renders Quartz Composer compositions. — from file “Quartz Composer.webplugin”.
MIME Type Description Extensions
application/x-quartzcomposer Quartz Composer Composition qtz
QuickTime Plug-In 7.6.4
The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site. — from file “QuickTime Plugin.webplugin”.
MIME Type Description Extensions
image/x-targa TGA image targa,tga
image/x-tiff TIFF image tif,tiff
image/x-pict PICT image pict,pic,pct
image/tiff TIFF image tif,tiff
image/x-png PNG image png
audio/x-mpeg3 MP3 audio mp3,swa
audio/vnd.qcelp QUALCOMM PureVoice audio qcp,qcp
image/x-sgi SGI image sgi,rgb
audio/x-gsm GSM audio gsm
audio/ac3 AC3 audio ac3
audio/aiff AIFF audio aiff,aif,aifc,cdda
audio/x-mpeg MPEG audio mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-wav WAVE audio wav,bwf
video/avi Video For Windows (AVI) avi,vfw
audio/x-ac3 AC3 audio ac3
audio/x-aiff AIFF audio aiff,aif,aifc,cdda
image/png PNG image png
image/x-bmp BMP image bmp,dib
video/x-mpeg MPEG media mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/mid MIDI mid,midi,smf,kar
image/pict PICT image pict,pic,pct
video/quicktime QuickTime Movie mov,qt,mqv
application/sdp SDP stream descriptor sdp
audio/x-midi MIDI mid,midi,smf,kar
audio/x-aac AAC audio aac,adts
audio/midi MIDI mid,midi,smf,kar
video/sd-video SD video sdv
video/x-m4v Video (protected) m4v
video/3gpp2 3GPP2 media 3g2,3gp2
image/x-jpeg2000-image JPEG2000 image jp2
image/jpeg2000 JPEG2000 image jp2
video/mp4 MPEG-4 media mp4
application/x-mpeg AMC media amc
image/x-macpaint MacPaint image pntg,pnt,mac
video/flc AutoDesk Animator (FLC) flc,fli,cel
image/x-quicktime QuickTime image qtif,qti
image/jp2 JPEG2000 image jp2
audio/mp4 MPEG-4 media mp4
audio/x-mp3 MP3 audio mp3,swa
audio/amr AMR audio amr
video/mpeg MPEG media mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/3gpp2 3GPP2 media 3g2,3gp2
image/jpeg2000-image JPEG2000 image jp2
audio/basic uLaw/AU audio au,snd,ulw
video/3gpp 3GPP media 3gp,3gpp
audio/aac AAC audio aac,adts
audio/mpeg MPEG audio mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-m4p AAC audio (protected) m4p
audio/x-m4a AAC audio m4a
application/x-rtsp RTSP stream descriptor rtsp,rts
audio/3gpp 3GPP media 3gp,3gpp
audio/wav WAVE audio wav,bwf
video/x-msvideo Video For Windows (AVI) avi,vfw
audio/x-m4b AAC audio book m4b
audio/x-caf CAF audio caf
video/msvideo Video For Windows (AVI) avi,vfw
application/x-sdp SDP stream descriptor sdp
audio/mpeg3 MP3 audio mp3,swa
audio/mp3 MP3 audio mp3,swa
QuickTime Plug-in 7.6.4
The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site. — from file “QuickTime Plugin.plugin”.
MIME Type Description Extensions
image/x-targa TGA image targa,tga
image/x-tiff TIFF image tif,tiff
image/x-pict PICT image pict,pic,pct
image/tiff TIFF image tif,tiff
image/x-png PNG image png
audio/x-mpeg3 MP3 audio mp3,swa
audio/vnd.qcelp QUALCOMM PureVoice audio qcp,qcp
image/x-sgi SGI image sgi,rgb
audio/x-gsm GSM audio gsm
audio/ac3 AC3 audio ac3
audio/aiff AIFF audio aiff,aif,aifc,cdda
audio/x-mpeg MPEG audio mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-wav WAVE audio wav,bwf
video/avi Video For Windows (AVI) avi,vfw
audio/x-ac3 AC3 audio ac3
audio/x-aiff AIFF audio aiff,aif,aifc,cdda
image/png PNG image png
image/x-bmp BMP image bmp,dib
video/x-mpeg MPEG media mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/mid MIDI mid,midi,smf,kar
image/pict PICT image pict,pic,pct
video/quicktime QuickTime Movie mov,qt,mqv
application/sdp SDP stream descriptor sdp
audio/x-midi MIDI mid,midi,smf,kar
audio/x-aac AAC audio aac,adts
audio/midi MIDI mid,midi,smf,kar
video/sd-video SD video sdv
video/x-m4v Video (protected) m4v
video/3gpp2 3GPP2 media 3g2,3gp2
image/x-jpeg2000-image JPEG2000 image jp2
image/jpeg2000 JPEG2000 image jp2
video/mp4 MPEG-4 media mp4
application/x-mpeg AMC media amc
image/x-macpaint MacPaint image pntg,pnt,mac
video/flc AutoDesk Animator (FLC) flc,fli,cel
image/x-quicktime QuickTime image qtif,qti
image/jp2 JPEG2000 image jp2
audio/mp4 MPEG-4 media mp4
audio/x-mp3 MP3 audio mp3,swa
audio/amr AMR audio amr
video/mpeg MPEG media mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/3gpp2 3GPP2 media 3g2,3gp2
image/jpeg2000-image JPEG2000 image jp2
audio/basic uLaw/AU audio au,snd,ulw
video/3gpp 3GPP media 3gp,3gpp
audio/aac AAC audio aac,adts
audio/mpeg MPEG audio mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-m4p AAC audio (protected) m4p
audio/x-m4a AAC audio m4a
application/x-rtsp RTSP stream descriptor rtsp,rts
audio/3gpp 3GPP media 3gp,3gpp
audio/wav WAVE audio wav,bwf
video/x-msvideo Video For Windows (AVI) avi,vfw
audio/x-m4b AAC audio book m4b
audio/x-caf CAF audio caf
video/msvideo Video For Windows (AVI) avi,vfw
application/x-sdp SDP stream descriptor sdp
audio/mpeg3 MP3 audio mp3,swa
audio/mp3 MP3 audio mp3,swa
RealPlayer Plugin.plugin
RealPlayer Plugin — from file “RealPlayer Plugin.plugin”.
MIME Type Description Extensions
audio/x-pn-realaudio-plugin RealMedia rm
audio/x-pn-realaudio RealPlayer Metafile ram
Shockwave Flash
Shockwave Flash 10.1 r53 — from file “Flash Player.plugin”.
MIME Type Description Extensions
application/x-shockwave-flash Shockwave Flash swf
application/futuresplash FutureSplash Player spl
Silverlight Plug-In
4.0.50524.0 — from file “Silverlight.plugin”.
MIME Type Description Extensions
application/x-silverlight-2 Microsoft Silverlight xaml
application/x-silverlight Microsoft Silverlight xaml
Verified Download Plugin
Verified Download Plugin — from file “VerifiedDownloadPlugin.plugin”.
MIME Type Description Extensions

New iPad control surface working well

I am not affiliated with this company.
This app just launched and it is working incredibly well with Premiere so far. Not only does it have a control surface with soft buttons for editing and playback, but it will do gestures (mark in with a 1 finger swipe, insert with 3 finger swipe, etc..)
Just thought it would be of note to the Pr community for those who are looking for an interesting way to interact with Premiere beyond mouse and keyboard.
http://ctrlconsole.com

It sounds like a hardware issue. Contact Apple Support. Here's how:
See all worldwide telephone support numbers

New Computer--Backup not working well (Help!)

Hi All,
Have my CDs for the backup of my iTunes Library and Playlists. It is not copying over my playlists. The files are being sent to my C Driver, but the playlists are not there. Is that normal?
I also do not see all my apps on the new itunes.
Help!
Thanks

In my opinion, the itunes backup to CD/DVD is very poor. Plus, if you take the trouble to test it and try to restore before you actually need to restore, you might find that the restore does not work.
My advice is to buy an external hard drive and use that for backups.
Assuming you have the default iTunes setup, all you need to do to backup is copy the iTunes folderand all its subfolders to the exHD.
This will copy the itunesLibrary.itl file (database with play lists, ratings, playcounts), the Mobile Applications and Artwork folder, and all your artist/albums.
If you have a special iTunes setup, then you need to figure out yourself what folders you need to back up.

New 2TB Time Capsule: solid amber light, but TC working well...what's wrong?

Hi, I'm hoping someone can help me...thanks in advance for reading through this question!
I have a brand new 2TB Time Capsule, using it with the AT&T U-verse modem/router 3801 HGV.
After much consternation, I finally got the TC set up in bridge mode with the U-verse router.
The TV, phone, and internet are all working well through AT&T...and my wireless internet
connection through the TC is working great as well. Also, the TC is performing the first
back up of my MacBook Pro hard drive. Everything seems to be working great, I think.
However, I have some questions that I feel need to be addressed:
1- The light on the TC is solid AMBER, not green. When I check the connections in the Airport
Utility, all indicator lights on my screen are green, and the "dot" beside the TC icon is green.
Solid amber indicates that the "Time Capsule is completing its start-up sequence". I would expect
the start-up sequence to be completed long ago and the light to be green...and I can't find anything
wrong.
Any ideas as to why the light on the TC could be solid amber??
2- What should I do to get the light to be green??
3- I have no idea of the speed of the back-up, and what it should be. I have about 190GB of data
to back up. I totally understand that it takes many hourse for the first back-up. It looks like the
speed I'm seeing is changing frequently, and it's backed up about 3.5GB in about 20 minutes or so.
Is that a fairly "normal" speed?? I just want to make sure my configuration is good.
4- I'd like to set up a "guest" wireless network with an easier password...I had done it earlier when
the connections were not working and perhaps I accidentally removed it when updating to "bridge"
mode. To set up a new network, do I just write over the info in the fields when I get to "Wireless"
tab in the Airport Utility?? The info from my "home" network populates those fields now, and I
just don't want to risk overwriting the info and losing that network.
Does the TC "add" a new wireless network when I add new data in those fields...and SAVE the
original "home" network I created?? Just making sure!
Thanks to those who reply!
Chris

1- The light on the TC is solid AMBER, not green. When I check the connections in the Airport Utility, all indicator lights on my screen are green, and the "dot" beside the TC icon is green.
That is weird.. most TC I look at solid AMBER means the hard disk is dead. Not sure but since it is working it is no biggie.. there is some control over how the led functions.. but I doubt you can set the color different.
In other words.. not a clue.. if the TC is new take it to the genius and show them.. that is not the way it is supposed to work.
3- I have no idea of the speed of the back-up, and what it should be. I have about 190GB of data
to back up. I totally understand that it takes many hourse for the first back-up. It looks like the
speed I'm seeing is changing frequently, and it's backed up about 3.5GB in about 20 minutes or so.
Is that a fairly "normal" speed?? I just want to make sure my configuration is good.
Over wireless expect slow.. you did not state wireless or wired.. but those look like reasonable wireless speed. your files will load at different speed.. small files are slow.. larger files much faster.. it takes time to write the tables for many smaller files.
We always recommend first backup over ethernet.. even if the TC is pulled out of the network.
4- I'd like to set up a "guest" wireless network with an easier password...I had done it earlier when
the connections were not working and perhaps I accidentally removed it when updating to "bridge"
mode. To set up a new network, do I just write over the info in the fields when I get to "Wireless"
tab in the Airport Utility?? The info from my "home" network populates those fields now, and I
just don't want to risk overwriting the info and losing that network.
Guest network is removed as an option in bridge mode.. just use the uverse modem wireless for guest.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. Is it Lion?

I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says I am not connected to the internet and offers me a choice of nearby networks including mine and then asks for a password when I select it. Why does it do this with our new MacBooks (also with my son's brand new one) and not with the iPhone, iPad and older MacBook? They happily automatically connect to our network after entering the password just the once.

Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?
To be specific. I have the imac late 2013 model, and i just bought the trackpad this October 2014. I have been using magic mouse without any problem. I just want to have a new experience with the trackpad. Any time i on my imac, i will have a normal screen with my picture and a guest column at the center. I need to click either my picture or the guest in order to have the space where i can key in my password with the keyboard. But unfortunately, my trackpad will show that it is connected and the cursor will be moving in front of the screen if i touch the trackpad, but if i try to click, i will get no response. I have to put back batteries inside my magic mouse and then click on my picture if i want to log in with my id or i click on the guest image if i want to log in as a guest. it is only after this that my trackpad will start responding.
i want to use only trackpad for now so as to be more efficient with it. I don't want to be putting back batteries inside the magic mouse only to on my imac. I need a solution please.
Thanks.

It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

The browser Working very slowly at the first time open or when i open a new link And not as well as by And I have Operating system xp sp3 Updated

the browser Working very slowly at the first time open or when i open a new link
And not as well as by
And I have Operating system xp sp3 Updated
And i get Stop in the script

'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)

Im in maldives and i been using the singapore store for a long time. and i used my credit card issued in maldives but with a singapore store and its been working well until one day my card expired and i reissued a new card. a different security number onl

i been using the singapore app store for a long time. and my credit card is issued in maldives and it was working well until one day my card got expired so i reissued it again here in maldives.and i was updates my payment methid only my having a new security number.and yet there came an error msg saying my payment is not valid.so now i cant buy any apps
so please help me out.

so adjust your iTunes account settings to reflect the new card...

New BIOS 1.2 working well?

Similar Messages

Maybe you are looking for