New Bios 2.4 is out

I got it just now , and i will install it later .
Check the downloads page .

I am also waitting to see if this Bios Release unlocks the VCore when using a Prescott
Has anyone flashed yet with a prescott???
Still Patiently waiting for MSI to unlock my Vcore
BeeBrasil
Quote
865PE Neo2- (MS-6728,version 1.1), Bios 3.2, Intel Inf 6.0.1.1002
I see that you have PCB1 which should use the Bios version that starts with 2.?????
but then you state in your signature that you are running 3.2
Is this just a typo??
The only reason why I ask is because we see many posts where people have tried to flash and used the wrong version
Just looking out for you
Boy , I wish MSI did not make things so confusing
Dave

Similar Messages

New bios 845E Max2 is out

Just notice from the msi web site that the new bios version 5.4 is now out for 845E Max2 mobo.

Hi ArbalestPang,
You can email MSI tech support as often as you want but I do think they are either too busy to response or just ignore any support request emails. I have tried couple times to email them some of my minor problems related to this mobo I have and so far I got no response from them.
By the way, the new Bios still have not fix the problem for system hungs during warm boot if you oc the FSB from 100 to 133.
Regards,
Ed

845pe max (6580) new bios version 3.7 out...

today 845pe max(6580) got new version 3.7 bios out again...so fast, just updated 3.6 last month me just updated, so far temperature change for 57c to 48c when idle after updated new bios :D but still quite high X(

X(...think can confirm bios ver 3.8 got problem.
its no more in msi website, think msi took its out.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=364
:O never test the bios properly and just release...

Will there be a new bios

Will there be a new bios for the K8N neo platinum? or is 1.4 the last.
I know beta bioses are available, but I don't want to use those.

T2faag , yes there will be a new bios for Neo1 .Beta out with name 1.5b6 is proof of that .
When they are satisfied with the 1.5Betas they will release a 1.50 official based
of one or several of the betas with possible som last changes or merged changes.
But have no idea of the timeframe .
(boogieman ! you refer to Neo2 not Neo1 )

S10 - new BIOS anytime recently?

A few months back, when I was first configuring my new S10 (6423-27G), I reported some BIOS issues after I installed an additional 4Gb of RAM. Basically, I could not convince Setup to record the new 6Gb RAM amout, so on each reboot, I got POST failures.
Eventually, rebooting after swapping a system board jumper enabled me to clear CMOS and start over, and now the machine boots fine ...
... except, of course, when I have a USB thumb drive inserted ("Configuration Error"), and other such things. Likewise, I cannot set a Setup password: at each boot up, POST complains there has been a configuration change.
In short, it appears that having a Setup password stops all manner of POST functions from working properly, and someone (Erik) suggested a new BIOS might be coming out.
Anyone know if one has, yet? And if so, does it fix these problems?
Brian

brian, a new D10 and S10 BIOS was posted tonight...
http://forums.lenovo.com/lnv/board/message?board.id=ThinkStation&thread.id=445
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

New Bios for 865PE Neo2 FISR2

Does anyone have any idea when a new BIOS version might come out for the 865PE boards might come out? I'm wondering because I was hoping one might come out to fix the problems they are having with OCZ and other ram's with manual cnofigurations and overclocking
Thanks
Trevor

I think it would do MSI better if they better organize their "tweak options" so people can understand what's going on and NOT end up surprised.
E.g. as observed by PeteJ61 in with memory timing = by SPD and DRAM Freq = Auto
[ http://www.msi.com.tw/program/e_service/forum/index.php?threadid=24347&boardid=10&styleid=1 ]
SLOW = no PAT/MAT + standard memory SPD settings + standard FSB + standard AGP/PCI
FAST = PAT/MAT + fast memory timing + overclocked FSB overclocked AGP/PCI
TURBO = PAT/MAT + fastER memory timing + overclocked FSB + overclocked AGP/PCI
ULTRA = PAT/MAT + fastEST memory timing + overclocked FSB + overclocked AGP/PCI
standard AGP/PCI = 66/33 MHz vs overclocked AGP/PCI = 70/35 MHz
on "C" rev P4's, standard FSB = 200MHz vs overclocked FSB = 210 MHz
So if you want to be able to individually control them:
1. To control PAT/MAT, select SLOW vs FAST
2. To control memory timing, select anything other than Auto in DDR timing
My main problem is that Neo BIOS 1.6 (and probably Neo2 also) does NOT allow selection of standard AGP/PCI clock once I move up the FSB - bummer :( . For this, I use a windows utility named ClockGen to fine tune down to reasonable levels.
Would there be a valid reason why MSI just didn't select fixed ratios rather than all this "fine tuning"?

Msi 865p/pe new bios out...

bios for msi 865p/pe board out already...just flashed bios for my 865p neo..so far so good...everything o.k... :D

be carefull...as i said my 865p bios come with a new AMI BIOS utility program "adsfi707" (i did check with one 865pe neo2 owner and his 865pe neo2 bios also come with the new AMI BIOS utility program)no more the "amifl827" thing. as i remind again for those first user, once you C: est>adsfi707 AxxxIMS.xxx...and "ENTER"...the flashing will start direct,you will see many >>>>>>>>>> be patient and wait for the flash programe to tell you that it has complete so far i knew a few 865p/pe owners had flashed the new bios with no problem...happy flashing... :D

MSI brought out the newer Bios?

So , if i get my new bios for my motherboard (msi KT3 ULTRA MS-6380E ) + 30.30 driver for my G4 MX 460 -VTP card will i have video in with msi's wincoder and winproducer ? ?( thank you g

http://www.msi.com.tw/program/suppo...?UID=398&kind=1
Not there,and the other one is not there.
DNS error,page not found.

GX700 new bios out

hello people,
has anyone used the new bios 4 gx700, which was released few days ago
Info:
The battery charging in 3 Amp only

Quote from: Bas on 27-May-08, 23:13:13
DO NOT USE A FLOPPY!!!!
FLOPPY IS THE WORST POSSIBLE WAY TO FLASH.
Have you tried the Forum-USB flasher?
Well it looks like you haven't, else you wouldn't suggest a floppy.
It's a simple as it can be:
>>Guide on how it works<<
That was my second option, I read about it but I thought it's easier with a floppy. I'll do it with the forum-USB flasher.

New BIOS for the MEGA.

We need one......for a number of reasons.
We need Prescott support, so the Celeron D would be an option. Northwood Celerons are getting scarce since they're out of production. My MEGA 651 could easily handle a slightly hotter Celeron....say 2.4 D. Most boards will handle Prescotts with only a BIOS upgrade. I have no reason to suspect otherwise with these MEGA boards.
My MEGA 651 has no option in the BIOS to adjust/change/turn off the fan control circuit. I would like to use Speedfan to control fan speeds.....but cannot. The board's own controller and the Speedfan program conflict, causing unstable fan operation. Most boards using auto-fan control let the user adjust the operation. The mega BIOS could be up-graded to do so.
I'd like to see some FSB adjustment in the BIOS....more than 100/133.
There are many improvements a new BIOS could offer....at very little cost to MSI. Maybe Doctor Stu could use some of his clout to get one written.

i don't have any clout
the 651 is an old model, so i doubt if we'll see any updates from MSI now, seeing as they will be pushing the new 865PRO now
unfortunately i also believe that the lack of prescott support is down to the SiS 651 chipset used, rather than MSI themselves

New Bios for K7T266 Pro2-RU

Hi All,
Are there any new bios' for the K7T266 PRO2-RU (i.e., above 3.7), that will support the AMD 2200+, 2400+ Processors once the Modification is done?
Thanks.
Craig

Hi,
The K7T266pro2 (MS-6380 V2.0) needs the modification to support all the latest 266FSB (TBred) CPU's because there is a timing change, removing the capicitor solves this and allows you to get the CPU starting.
MSI's official statement is that they don't support this as the board is long out of production.
However, they where nice enough to give us the modification in order to give you the posibility to get it running.
They're plan was to stop releasing BIOS'ses at v3.60 because there was no need to release another.
I convinced them to release 3.70 that has updated CPU-ID code for all 266FSB CPU's, and no again, they still don't support any CPU over the fastest Palomino officialy.
What they did was giving us the posibility to use an outdated board a bit longer, be happy about that.
As for the testing of CPU's on this board, that stopped at BIOS 3.50...
Any given board will fade away at some point in time, thanks to MSI (unofficialy), the K7T266pro2 with the modification can be used a bit longer......
All you need for the right multiplier is leave it at auto....as the correct one is hardcoded on the CPU itself...

How do i get new bios?

How do i install a new bios. Cant it be done from windows , the msi liveupdate thingy? or do i have to flash with disk or something , plz explain to me how to do!

NEVER EVER have I had a problem using Live update to update the BIOS
Highly recommended for BIOS newbies as it runs through windows:>
LiveUpdate is one of the best utilities MSI has every brought out - probably the first too :>
install Live update from the included CD - follow instructions - first thing it'll do is ask you to update Liveupdate - download the update - install it and then run Live update again.
PSS - If you have Windows XPSP2 - you will need to allow the activeX controls to run in order for it to work.
Have fun - and take it easy - DONT RUN ANYTHING ELSE whilst trying to flash your bios - just remember - if the BIOS update gets screwed - ur screwed 2 and u'll be

I can't upload new BIOS f.40 on my Probook 4740s

Hi. I can't upload new BIOS or older BIOS on my laptop. why? How can I fix it? I bought a new laptop from store with windows7 in it, but it doesnt work correctly. I downloaded a new BIOS f.40 from HP site, it showed me, that BIOS instaled in my pc is F.01. I find out, that it isn't for my computer. maybe that because I cant upload new BIOS? So, how can I solve this problem? I downloaded a programe for BIOS to flash BIOS from usb stick, but I couldnt finde BIOS F.40 right for that program.

Hello dziugesiukas. I understand you're trying to update your BIOS.
There is a F.40 version of your notebook's BIOS. Here is a direct link.
What happens when you try and install this BIOS? Do you get an error?
I"ll keep an eye out for your reply. Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Ideapad U330 Power Plug Beep & Laptop hotter on new BIOS?

Dear Lenovo,
I'm BEGGING you to please update for the beeping sound for Power Plug. It's really annoying that such a simple thing can't be removed. Second, my laptop is usually around at 37 Celcius to 47 Celcius. After I installed the new BIOS, it seems that it made my laptop even hotter? It's now 57 Celcius!! I run the same ammount of softwares & programs, and those doesnt even use a lot of my CPU. Please check out your BIOS firmware.
Viet Tran

JustV,
The request to mute the power beep has been submitted to development previously. I don't have an ETA on when this will be implemented, but will share that when available.
Let's talk about your observations of temperature. How are you measuring temperature? Through software, or somewhere physically on the system case? Are you running on battery or AC & Battery? What level of charge is the battery?
As far as I know, no changes were made in this BIOS that would affect system temps.
What applications are you running?
Have you checked to ensure your fan is running normally? Is warm air exiting the vents on the system?
Has anyone else observed a change in operation after the BIOS update?
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

MSI 975X Power Up Edition V2.1 Issue Beside Overclocking After Flash New Bios

Hi all,
I hope I can get a lot of help here. I'm having a few issues with this board. I cannot find any thread that discuss other issue beside overclocking after you flash a new bios. Here are my problem:
1. I installed fresh WindowsXP with SP2. Windows cannot detect new usb device eventhough WindowsXP recognized the usb controller. If I plugin any usb device, windows does not detect a new device. I try to stick a USB flash and I can see the light for a few seconds but Windows cannot detect it. Before I upgrade the bios to version 715 (beta), I used usb flash to upgraded it. Now, the bios is not even boot from usb flash.
2. Other things that concern me, the southbridge chipset is really really hot. If you touch it long enough, it will burn you.
3. I cannot figure it out the front audio from manual book (JAUD1). Is any of you know where the mic needs to go?
Thanks

I removed the Big Typhoon from the MB and I replace with stock fan. I want to make sure the back plate from Big Typhoon doesn't cause any problem. When I bootup the windows, I saw WindowsXP recognized the USB device but it disappeared again. I took the MB out from the case and test it without a case. It stills does not recognize the usb. Somebody mention bad PSU(Power Supply Unit) may cause a lot wierd problem. I changed PSU from RaidMax Vocalno 630W to Ultra X-Finity 500W. I don't have a lot of stuff that require power. Do you think the PSU cause this issue?
This is list of my comp:
MSI 975x Platinum PowerUp Edition V2.1
Conroe E6600 Retail
Seagate 300G SATAII
Maxtor 120G IDE 100
Asus 16X DVD-ROM
NEC 3550A DVD-RW
Ultra X-Finity 500W
120 mm Fan
80 mm Fan
Big Typhoon
FYI: USB Controller and USB 2 Controller are enabled in BIOS.

New Bios 2.4 is out

Similar Messages

Maybe you are looking for