New Bios for K8N Neo 2?

I belong to the overlockers.com forum. People over there are dropping MSI's left and right because of stability issues and overclocking problems. This is not to mention the quirky temp readings and vcore settings. It seems that some of these issues could be addressed by a new bios. These same issues have been fixed by Epox with their bios updates. When is MSI going to get this done? I suggest it should be soov or the reputation of this board and MSI are going to ake a beating.

Quote from: MurdoK on 12-February-05, 18:04:15
Hello !
What is going on ?
I have tried this so called 1.52 Beta Bios on my K8N Neo2 Platinum, it flashed well but when i tried to restart my System,
it will run for 1-2 seconds then it shuts off !!!!! No Post - Just shut off !!
I have tried to clear the Cmos two times but there is always the same Problem. Bootblock Disc doesn´t work neither.
What can I do ? Please help ?
GREETZ
OMG that could of been me. I was going to flash those yesterday.  but i got worry, and ask myself y haven't any1 post back on the forum. so i was think it could of screw up their MOBO. I was gonna post a warning about it but, it was late and i got lazy.
I could of save your MOBO but, My laziness killed your board.
anyway i hope u get fix. 

Similar Messages

  • Who have v1.56 bios for K8N Neo FSR,give me please.thx

    who have v1.56 bios for K8N Neo FSR,give me please.thx 

    Bios Collection. *Updated * 7025 1.B beta4 follow Syar's MSI Nvidia64 Bios Collection  link.

  • BIOS FOR K8n neo platinum

    A while back there was a big post about how to properly upgrade your bios and he had listed every bios beta or official for download.  Anyone have that post? and What is the best bios for the K8n Neo platinum? Im still running on 1.1....

    Quote from: Supershanks on 09-June-05, 04:24:05
    Just the usual bios to bios temp tweak - no worries   
    Have been running with speedfan with a 4C offset think i can dith it now with 1.8 
    Higher or lower?
    Hmmm... My SpeedFan is running with no delta adjustments on the temps. I wonder if there is a discrepancy in what it's reporting & what it actually is after you boot into Windows
    I'd try to go by what the Hardware Monitor says, but temp's always seem to be high when you're in BIOS anyway....

  • Modded bios for K8N Neo-54G Platinum

    Hi,
    i've noticed that there are some modded bios versions available for the K8N (i.e. at syar2003's collection). My question is now whats the difference between them and the MSI versions (especially between the latest 1.56 versions)?
    Edit: Has anyone allready used the modded bios 1.56 and has he got any performance boost?

    Hehe , don't consider yourself a retard for this .
    MSI's naming of theese boards is pretty simular and can cause theese
    kinds of confusions .You are not the first one .
    Anyway it was good you got the mishap resolved so quick
    and got up and running again.
    Look for radical_53 's post he has made a "Neo2" bios with nvraid ide rom bios 4.66 . Send him a message and he will email it to you ,i'm sure.
    Vdimm voltage is not coming any higher i think , either for Neo1 or Neo2 .
    Guess it has to do with board design , selection of regulator IC , and
    the fact that msi runs mem from the 3.3v line (some voltage level will always be missed due to the components and regulation)
    If you want really high vdimm there is just one way and that is hardmodding
    the motherboard and that can be a risky affair bothe for board/mem and cpu
    if things go wrong.
    Other alternative is another mobo .
    DFI's s754 takes vdimm from +5v and there is a modded bios that gives upto 4v for memory. They have a s939 board ready thats being betatested , but it's not released yet.
    MSI K8N boards have pretty desent max vdimm compared to many others .
    This is what i have found on some others :
    Gigabyte max VDIMM 2.7v
    MSI K8N Neo2 VDIMM 2.85v
    DFI Lanparty UT VDIMM 4.0v (s754 with modded bios)
    Asus K8N VDIMM 2.8v (some PCB's max 2.7v)
    Epox VDIMM 2.8v
    Chaintech VDIMM 2.9v

  • New Bios for K9N Neo-F. Is it possible?

    It has possibility of the MSI to launch a Bios for the K9N Neo-F, with more options of OC? how adjustment of VCore, for example?

    Quote from: nascarbr on 23-January-07, 10:26:11
    But it does not use same chipsets of Abit KN9S, that is very good of OC?
    no idea for Abit KN9S, to your main question again don't think MSI will add more OC options in futures BIOS in that board, but that is my guess only.

  • The new bios for 875P neo ??????????

    Where is it ?  X(  Where is the new Bios ?  X(  What's does MSI ?  X(  

    You're telling me, I waited till 7am in the morning gaming while waiting. As of right now, no new bios, yeah MSI, what gives?...

  • New BIOS for K8N Neo2 Platinum

    Version 1.1
    - Support CPU FSB to 350MHz.
    - Incorrect message during POST after CPU over clocking.
    - Support Sempron CPU.
    - Ghost rate is slow with RAID0 under DOS mode.

    Quote
    Anyone noticed a slight slowdown of the processor? I'll have to get back home to doublecheck all BIOS settings, but checking this with Sandra (which has been accurate so far for CPU speed testing) BIOS 1.0 and 1.1 showed identical speeds...BIOS 1.2 is 10% slower.
    let us know what you find out....curious myself because i already checked bios and nothing changed after update

  • New Bios For MSI K8N Neo Platinum [ 1.55]

    NEW BIOS FOR MSI K8N Neo Platinum !!!!
    BIOS 1.55 FOR K8N
    AND CLICK
    Apothikeusi/Emfanisi (Greek Language )
    Your CPU temperature is in the safe range. Please rest assured. If you are
    willing to, would you please flash BIOS to the version 1.55 verifying? We
    send it by attachment. As to how to flash BIOS, please refer to the word file
    in the attached file. Please kindly inform us of the results. Thanks for your
    cooperation.
    In addition, please enter BIOS to load optimized defaults after flashing BIOS.
    Please feel free to let us know if you still have any further issues or inquiries.
    Best regards,
    MSI Technical Support

    OMG !!!!
    Something is really weird about this bios !!!!
    I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
    Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
    OMG OMG....
    If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
    Really strange guys.I thought 230 was my memory limit....
    Gonna try higher and let you know.
    P.S. this bios seems to like Kinston Ram....Value at least  

  • When is going to be released official new bios for k9a platinum

    Hi,
    as I write in topic, when is going to be released new bios for k9a platinum?
    thanks

     That is a Kuma CPU and as such it is not and probably will not be supprted on your older MB.
     Here is a list of MBs that support 7550 Kuma, 7750 it appears like is too new to be on any MSI MB CPU support list yet however it it should be supported on them as well.
    K9A2 CF, K9AGM3-F, K9A2 Neo-F
    K9N2GM-F V2, K9N2 SLI Platinum / K9N2 Zilent, K9N2G Neo
    K9A2GM V3, KA790GX, KA780G-M
    KA790GX-M, KA780GM-M, KA780GM
    K9A Platinum >> CPU support << list

  • Which drivers for K8N Neo 2 Platinum

    I'm just about to place an order for a K8N Neo2 Platinum to go with my AMD 64 3000+ Winchester.
    As is usual I normally download the latest relevant BIOS and drivers in advance so everything is ready to go when the hardware turns up.
    However, looking at the MSI page, there seems to be a bewildering array of drivers for this board: Neo2 drivers and it's not exactly clear which ones are for my specific board.
    For example, I can't seem to find a relevant SATA driver from the list.
    The actual board I'm going for is this one from Overclock: link to board
    Can anyone list clearly the drivers, BIOS and any other utilities I will need when installing this board?
    Thanks.

    Well after a lot of reading, I've determined that the following files are applicable to my board:
    BIOS
    BIOS: 7025v14.zip
    Drivers
    NVIDIA nForce3 System Drivers: NF3_CK8S.zip
    Marvell LAN Drivers: MarvellWXP69.zip
    Realtek ALC Series AC'97 Audio Drivers: Realtek_ALCXXX_73.zip
    I still can't seem to find a SATA/IDE driver as none of the ones listed are compatible with a Neo2 Platinum.
    The closest I can find is the Nvidia nForce3 SATA/RAID driver for Windows 2K/XP but that is only for K8N Neo Platinum (7030).
    Anyone know if this is the same driver for the Neo2 Platinum (7025) also?
    Have I missed anything?
    There are also lots of utilities, some of which appear to be useful, if not necessary:
    Utilities
    NVIDIA nTune: nTune_MB.zip
    MSI DigiCell: DigiCell_MB.zip
    MSI PC Alert 4: PCAlert4_MB.exe
    MSI Core Center: CoreCenter_MB.exe
    MSI Live Update: LiveUpdate.exe
    Fuzzy Logic 4: FuzzyLogic.exe
    MSI DMI Browser: DMIBrowser.exe
    MSI i-Speeder: I-SPEEDER.exe
    MSI WMI Info: WMIInfo.exe
    MSI PasswordKeeper: PasswordKeeper.exe
    MSI SecureDoc: SecureDoc.exe
    MSI InfoView XP: InfoView.exe
    MSI GoodMem: insgoodmem.exe
    MSI Lockbox: LockBox.exe
    Anyone care to comment on the usefulness (or not) of any of those utilities?

  • Need new bios for r9 270x

    Hi, I would like to request a new bios for my 270x
    S/N 602-V303-070B1404003989

    where is it located on the card? I cant find the current version in windows because my screen doesn't display because the card doesn't work... I think its  v303 ver:1.1

  • New Bios for K7T266 Pro2-RU

    Hi All,
    Are there any new bios' for the K7T266 PRO2-RU (i.e., above 3.7), that will support the AMD 2200+, 2400+ Processors once the Modification is done?
    Thanks.
    Craig

    Hi,
    The K7T266pro2 (MS-6380 V2.0) needs the modification to support all the latest 266FSB (TBred) CPU's because there is a timing change, removing the capicitor solves this and allows you to get the CPU starting.
    MSI's official statement is that they don't support this as the board is long out of production.
    However, they where nice enough to give us the modification in order to give you the posibility to get it running.
    They're plan was to stop releasing BIOS'ses at v3.60 because there was no need to release another.
    I convinced them to release 3.70 that has updated CPU-ID code for all 266FSB CPU's, and no again, they still don't support any CPU over the fastest Palomino officialy.
    What they did was giving us the posibility to use an outdated board a bit longer, be happy about that.
    As for the testing of CPU's on this board, that stopped at BIOS 3.50...
    Any given board will fade away at some point in time, thanks to MSI (unofficialy), the K7T266pro2 with the modification can be used a bit longer......
    All you need for the right multiplier is leave it at auto....as the correct one is hardcoded on the CPU itself...

  • Best Bios for Msi neo ver 2 series

    i buy a new motherboard last week, im looking forward for a new bios for it any suggestion?

    If I were you I won't update the BIOS until it causes a problem. Gd luck

  • Best bios for p965 neo v.1x

    what best bios for p965 neo v.1x?
    proc dual core 2,8 nvdia ge force 8400 GS,2x 1 gga ddr2 pc 800
    windows 7 ultimate 32 bit
    thanks for reply

    I have 1.9 right now...i just ask for best perfomance for my pc...what recommended bios for the best perfomance and for gaming thanks

  • I am looking for new BIOS for HDD STORE TV

    I have multi HDD STORE TV, but I am not satisfied it, because it supports very very limited number of formats.
    Unfortunately does not read MKV and many other formats.
    May be at somebody have new BIOS for it or from another HDD compatible that reads more formats?
    I will be very grateful.

    >May be at somebody have new BIOS for it or from another HDD compatible that reads more formats?
    If something like that would be available, then you would find this on the Toshiba European driver page in the download area.
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
    Choosing Options -> Drive Devices -> Multimedia HDD -> 3.5 StorE TV you would get the software related to this option part but as I can see there are no updates for this time

Maybe you are looking for

  • Ignoring Http basic authentication header in wls 7.0.sp2 web service servlet (weblogic.webservice.server.servlet.WebServiceServlet)

    Hi! We need to implement authentication using our own methods, and the authentication information is provided to the web service implementation in a basic authentication header. The problem is, that the servlet weblogic.webservice.server.servlet.WebS

  • Man-Hours Estimation template for BW objects

    Hi, I tried to search for specific templates relating to Man-Hours Estimation for the development of BW objects like Extractor programs,datasources, infosources , Info Providers , Queries , Web reports etc. But I was not that successful. It would be

  • Moving from a 2.4GHz iMac to a 2.66GHz iMac... much difference?

    Hi Guys, I am selling my previous-gen iMac 2.4GHz and upgrading to the current 2.66GHz version. Might seem crazy, but the actual reason for the upgrade is so I can fit 8GB of RAM into it (once the new 4GB sticks of RAM are just a BIT cheaper!!!)... B

  • ISync and SonyEricsson K608i

    I have iSync vs. 2.2 which lists the above mobile as one of the compatible devices. However, this was not the case and I have had to install a plugin from mobile.feisar.com (obtained from another post) to get it to work. I can now successfully sync c

  • Camtasia to FCE: how to improve canvas quality

    I recently started using Camtasia on a PC and saving the files as an HD quality mp4 file and then importing it into FCE on my iMac. When I watch the file on Quicktime or in the FCE viewer the quality is great, however when I watch it in the canvas th