NEW BIOS FOR PHENOM II X6 IS AVAILABLE FOR ALL AM3 SUPPORT MOBOS

Hello every one
I checked the msi site today and the new bios that support phenom ii x6 is available for these mobos:
NF980-G65
http://www.msi.com/index.php?func=prodcpu2&prod_no=1885&maincat_no=1
NF750-G55
http://www.msi.com/index.php?func=prodcpu2&prod_no=1874&maincat_no=1
GF615M-P33
http://www.msi.com/index.php?func=prodcpu2&prod_no=1815&maincat_no=1

Quote from: Bas on 28-May-10, 18:24:26
Sorry but the easier way to check it: http://event.msi.com/mb/amd/6core/
I dont see the NF750-G55 on your link Bas, thank you NVIDIABOY boy this is good to know.

Similar Messages

  • I have tried downloading photoshop cs2 and cs4 on a new computer.  I have the disc available for cs2 and the serial number for cs4.  They are both registered in my name.  I need help doing a download.

    I have tried downloading photoshop cs2 and cs4 on a new computer.  I have the disc available for cs2 and the serial number for cs4.  They are both registered in my name.  I need help doing a download.  I was able to get part way through cs4, it showed up in my downloads but never got as far in the process as to ask for serial numbers.  I tried with cs2 and I got an error message that some bit of information was incorrect.  I currently have both downloaded on two other lap tops I own.  One is operational and one is dead.  I cannot access the dead one to remove the program. Thank you in advance for any assistance.

    For CS2 you will need to download a special new version
    CS2 Activation
    You might find CS4 download here
    Prodesign Tools — Photoshop Direct Download Links

  • New version of the HBM_MGCCP42 DataPlugin is available for download.

    A new version of the HBM_MGCCP42 DataPlugin is available for download.
    The HBM_MGCCP42 DataPlugin supports HBM MGCPlus CP42 binary measurement files.
    The new version corrects an offset problem which occurred in some cases when reading HBM MGCPlus CP42 binary measurement files.
    A list of all DataPlugin for file access with DIAdem, LabVIEW, DataFinder and LabVIEW DataFinder Toolkit can be found at ni.com/dataplugins.

    Try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • HT201320 I want to have all the facilities of my Ipad obtained for my e mail address, available for another e mail address belonging to my wife. Anyone know how I set this up please?

    I want to have all the facilities of my Ipad obtained for my e mail address, available for another e mail address belonging to my wife. Anyone know how I set this up please? I am a new user and long in the tooth so any help would be much appreciated.

    What do you mean by "facilities of my Ipad obtained for my e mail address"?
    Do you mean you want to setup your wife's email account on your iPad? Or something else?

  • I created a book in iPhoto for an upcoming family reunion. Most attending are interested in purchasing a copy. Is there a way for me to make it available for attendees to purchase? What are my options? Thanks!

    I created a book in iPhoto for an upcoming family reunion. Most attending are interested in purchasing a copy. Is there a way for me to make it available for attendees to purchase? What are my options? Thanks!

    There is no way for anyone but you to place the order. You can get a list, collect money and order passing out to purchasers at the reunion. For late orders you can have them shipped to you and reship or use a different shipping address for each order
    LN

  • I keep getting a message that a new version of Firefox (32.x) is available for installation, but it won't install. I have 31.0 .

    A window pops up that says a new version of Firefox is available (version 32.x). I click on install, and nothing happens. The wheel keeps spinning so I close the window. When I click on About Firefox and then click on Updates available at https://www.mozilla.org/firefox/, a web page opens that says: Congrats! You're using the latest version of Firefox.
    If I'm using the latest version, why do I get a window that says a newer version is available and why won't it download?
    I have a new iMac with OSX 10.9.5.

    Hello,
    Please see:
    * https://support.mozilla.org/en-US/kb/firefox-cant-be-installed-mac-how-fix-it
    Edit: Sorry, I hit the Post button too quick. Firefox version 32.0.3 is out and is the latest version. For mac users, you will need to download it here: https://www.mozilla.org/en-US/firefox/all/
    It is strange however that your updater isn't installing the update for you. Are you using a user account with the right privileges?

  • Error importing new version of our app "Application not available for edit"

    Hi,
    We are trying to import an app and get the error: Application not available for edit
    thats it on a clean white background - Application not available for edit shows up at the top left corner of the screen.
    Any clues?
    We tried a new id, tried a custom id.
    Then we tried deleting the existing app so we could insert the new app.
    We can't delete either.
    Help!

    I'm going to hijack this thread and ask a follow up question to Scott (or whoever reads this).
    When we export our application out of DEV it gets exported as Run + Build. When I have the DBA import into test or production on the Import screen I have them set it to Run Only and Reuse the Application ID. After installing it just forwards you to the same white screen with the "Application not available for edit" message on it. Now I understand the actual message since its Run Only, but its not clear that the import actually worked correctly or not.
    So although it does seem to import correctly, they always get nervous when they see this that it didnt import correctly. So is it better to have them import as Run + Build and then go change the build status through the admin front end rather than the way I'm doing it now?

  • Trying to use new YahooMail interface, I've got the message: Sorry, Mozilla Firefox optimized for Yahoo! is not available for your system.

    My hardware is moch more advanced than demanded for version of Firefox? optimized for Yahoo.
    Thank you for your help!

    Download latest Firefox 6.0.1 version from one of these links:
    * http://www.mozilla.com/en-US/firefox/new/
    * http://www.mozilla.com/en-US/firefox/central/
    * http://www.mozilla.com/en-US/firefox/fx/
    * http://www.mozilla.com/en-US/firefox/all.html
    Uninstall your current Firefox
    * https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
    * DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
    Install Firefox using the downloaded installer file
    * https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
    Check and tell if its working.

  • ProRes presets for Media Encoder CC now available for download

    Hi everyone,
    We have new ProRes output presets available for Media Encoder CC. You can download the presets here
    While the new presets do not add new functionality to Media Encoder, they do provide added convenience. By definition, these presets are for use on Mac OS. If you are on Mac OS X 10.8, or 10.9, the ProRes codecs come installed with your operating system. If you are using Mac OS X 10.7, you will need to install one of the Apple Pro apps (Final Cut Pro, Motion, Compressor, etc.) for the presets to function correctly.
    Here’s what’s new with the Media Encoder CC ProRes presets:
    Preset names have been updated to say "SD" (instead of “DV")
    The Field Order of PAL SD presets changed from "Lower" to "Upper"
    Frame Size of NTSC SD presets changed from 720x480 to 720x486. This is based on Apple's ProRes specifications. If 720x480 versions are needed you can create your own User presets with these settings.
    Enhanced support for multi-track audio sources. New "Audio Track Layout" and "Channel Layout" sections let you specify the number of exported tracks, track types (single track, dual mono, or stereo pairs), and channel mapping for 5.1 audio
    Please note: the ProRes presets should only be installed on AME CC (7.x). They may not work correctly in AME CS6 or earlier versions.
    If you have any questions, please let us know.
    Eric

    Hi Eric,
    Much appreciated, but I was wondering when we might expect a framerate and resolution independent way of transcoding media?
    Sometimes (as in most of the time) I don't really care about changing resolutions or retiming anything, I usually just have a pile of media that I would like to conform to a single codec, independent of framerate or resolution, like at this very moment.
    Right now I need to transcode 100+ clips in various flavors of h.264, mp4, and animation codec in order to get this media into Resolve.  I don't want to have to specify different framerates and resolutions, I just want them transcoded to ProRes.
    The presets are nice, but the ability to do what I'm needing would greatly reduce the need for presets like these.
    Thoughts?
    Thanks!
    Message was edited by: Graham Hutchins, added a line.

  • Ciscoview device manager for content switch module not available for download ?

    Hi,
    On Cisco support site CVDM is no longer available for download despite that warning message says it won't be available since February due to migration to another server. Any idea where to get it for my CSS11501 ?
    Cheers
    Arun

    If you use the old link:
    http://www.cisco.com/cgi-bin/tablebuild.pl/css11500-crypto
    You'll get redirected to CVDM for the CSS11506. It's the same CVDM software as the CSS11501 and CSS11503. Don't know why only the CSS11501 link is broken.

  • Screensavers for XP which are currently available for Macs?

    Could there or are there any good screensavers available for XP? I love the Mac but am only XP due to finance however may in the future get a Mac.

    Why not just do a simple Google search?

  • Is Siri available for ipad2?, Is Siri available for ipad2?

    Is Siri available for iPad 2

    macmac_36 wrote:
    I love how all these wonderfully insightful people answer a question that wasn't asked. I refer to readers to the question why can't my iPad 2 get Siri. For those who study the English language you will not the subtle difference in phrasing between that and 'do I have the right to free upgrades'.
    Where in this thread did anyone ask "Why can't my iPad 2 get Siri?" My command of English is generally considered better than adequate and I can't find that question or any reference to anyone having or not having the right to free upgrades.
    You are correct the iPad 2 is just as capable (in fact more) than the iPhone 4S to run Siri.
    The original poster never made this (unfounded) assertion.
    Are you sure you're in the right thread?

  • If i purchased an app for my iPad and its available for the mac do i have to pay again?, if i purchased an app for my iPad and its available for the mac do i have to pay again?

    i purchased bills for the ipad.  its available in the app store for my macbook.  do i have to pay for t again if i want to download it?

    Depends on the app. If you have to create some sort of account within that app, theoretically signing in with the same account on the Mac version may have your data. No one would know here for sure unless they have experience with that app.

  • New Product Announcement: Measurement Studio 2013 is available for download

    Measurement Studio 2013 continues to offer programmers the latest tools for development and visualization with new support for .NET Framework 4.5, Windows Presentation Foundation (WPF), and Visual Studio 2012. Measurement Studio 2013 integrates into Visual Studio 2012, 2010, and 2008 to provide engineers with a complete suite of tools for building professional engineering applications to acquire, analyze, and display measurement data.
    >> Upgrade to the new version
    >> Read about WPF Technology
    >> See Release Info and Bug Fixes
    >> Download here
    National Instruments

    Hi StenAndersen,
    This KB might be a helpful reference in this regard: http://digital.ni.com/public.nsf/allkb/C51E3B38578FAD2786257C070069F386. I apologize for any inconvenience this is causing in your projects.
    Rahul B.
    Applications Engineer
    National Instruments

  • New maps data 01.26.113 now available for maps 3.0...

    Successfully updated data for Maps v3.01 to v01.26.113.
    Worked both through Ovi Suite v3.1.1.80, and Nokia Map Loader for Mac.
    A note for Mac users:
    If you're planning to update your Mac operating system to 10.7, it would probably be a good idea to update maps first, since 10.7 could very well "break" Nokia Map Loader for Mac [edit: could someone confirm this?], and Nokia might not be quick to offer an updated version of the program. Am I correct that Nokia Map Loader for Mac does not work for more recent versions of the Maps application?

    kurtkaufman wrote:
    Am I correct that Nokia Map Loader for Mac does not work for more recent versions of the Maps application?
    Yes you are, it does not work for v3.06 and later.
    Happy to have helped forum with a Support Ratio = 42.5

Maybe you are looking for

  • MSI 865PE Neo2 and USB WD (MY BOOK) external HDD

    Ok, so recently i went out an brought a My Book. I plugged it in and formatted it.. Next morning i came out turned of my PC and the computer hung during POST. after a few attempts at booting the PC up, i unplugged the MY BOOK from the USB port and re

  • 5.1 sorround system don't works

    Hi, I'am an italian user, so I hope that you could forgive me for my english!! I have a problem with my sorround system: works only the front channel and the LFE! I have a nvidia ck804 chipset and i've tried to follow some wikies but it still not wor

  • 8i on linux (SUSE 6.2) - unresolved symbol

    I'm getting: sqlplus: error in loading shared libraries: /home/oracle/product/8.1.5./lib/libclntsh.so.8.0: undefined symbol: nauzaoss I installed Oracle 8.i on a fresh install of SUSE 6.2 (glibc 2.1) and the install of Oracle went fine. The svrmgrl p

  • Authorization policy in oam11g domain

    Hi Guys, One of our web resources protected with oam (webgate 10g) needs password also for application side authorization,My questions are, 1.Is it possible to set password in session,header or cookie in response of authorization policy of applicatio

  • Runs slow & locks up plus can't windows update & upgrade to professional

    HP 6250 desktop running windows seven. problems started after replacing hard drive.   Help please.....