New BIOS release - "Updated the ACPI SLIC table"

Hi.
Can anybody explain what "Updated the ACPI SLIC table" means in the new released BIOS update for Toshiba Qosmio x505? That explanation is really vague.

This Microsoft article should give you an idea what it's about.
You receive an error message when you try to activate Windows Vista or Windows 7 on a computer that ...
Don't ask me for more..
-Jerry

Similar Messages

Function module updating the data base table

Hi,
This post is regarding the function module not updating the data base table.
I am calling the FM SD_SHIPMENT_HEADER_CHANGE inside the ZFM. It's returning success an changing the table c_xvttk_new with the new TDLNR value. But it's not updating the Shipment table VTTK-TDLBR or VT02N Forwarding agent.
When I directly updating Forwarding agent in VT02N it's updating fine.
Please let me know what the extra step need to be included to update or COMMIT the FM for updating
Forwarding Agent(VTTK-TDLNR).
Best Regards,
Mahesh

hi friend,
This link wont five u the complete help but if u ananyse it then it might provide u some idea......
BAPI change shipment doc
regards
kanishak

Update the stastics of tables BKPF and GLFUNCA

Hello All,
update the stastics of tables BKPF and GLFUNCA not updataing
I have execute via Brtools
7 - Database statistics >> 1 = Update database statistics >> 9 ~ Tables for update (table) ......... [BKPF]
same for table GLFUNCA
7 - Database statistics >> 1 = Update database statistics >> 9 ~ Tables for update (table) ......... [GLFUNCA]
But in .sta file it is not collected
<DB20>
Table                 GLFUNCA
     Statistics are current (|Changes| < 50 %)
New Method           E
New Sample Size      P1
Old Method           E                       Date                 17.08.2008
Old Sample Size      P1                      Time                 19:52:15
It is one year old , so please help me how to update this table
Is this table causing performance problem for job RSUVM007
Regards
Mohsin M

Before all,
Why do you wnat to calculate statistics on those tables?
Do you have performance problems and you have identified that they are caused by "bad" statistics?
or simply you "must" collect them because they are "OLD"?
If it is the latter, remember that statistics MUST be representative not current. Please read the SAP Note 825653 "Oracle: Common misconceptions" point 7
Regarding the options of BRtools, it works as designed.
BRCONNECT will check if the table needs statistics:
- if it has changed more than 50% since last time (in your case 17.08.2008) and, if so it will do, otherwise it will not do it. See the output of DB20 that you pasted:
> Statistics are current (|Changes| < 50 %)
IF you need new statistics (and I mean, need, not like) then you have to force them. On BRTOOLS you go to the next screen and choose the option:
> 7 ~ Force options (force) ............... []
In your version/patch could be located in a different place
and here input collect
I strongly recommend you to read the BR*tools documentation as ALL this information is there.
In case you do not know where to find it, it is quite easy:
SAP on Oracle => Oracle DBA Overview => SAP Database Guide: Oracle

How to update the change log table?

Hi
I am doing some manipulation on the ODS records and writing few new records directly into the active table of my ODS. how do i update the change log table so that i can do a delta from my ODS to further data targets??
i see the fields REQUEST, DATAPAKID, PARTNO and RECORD in the change log table. what values should these fields have for my new records??
Regards
Sujai

Hi,
Please try this option. In stead of writing directly into DSO, do it in another Custom Z DSO. From there, do the FULL load to your previous DSO. This will ensure that the data consistence through the system. Also, do not forget to delete the data from Custom Z DSO once you successfully loaded the data.
Thanks,
Saru
Edited by: P. Saravana Kumar on Apr 1, 2009 6:23 PM

I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones.

Hi!
I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones. All of them are "waiting"... for ever.Even, when trying to download a new app, a "dratf" icon appears on the ipad, not the app's own icon...
I've tried to switch off and on the iPad, disconnect and reconnect the itunes id... and nothing works. Even deleting an app, to download it again, doesn't work. It even doesn't ask for my password!!! (Stays with the small square with a circle around, the one that gets "bolder" while downloading... but it doesn't get bolder now. Just stay...).
Any suggestions? I wouldn't like to reset the iPad, since I've got data in some apps that I wouldn't like lo loose...
By the way, I can not either delete some apps with thos "draft" icons... even when the alert that appears when trying to do that is shown and select "ok".
Thank you in advance!
Best Regards,
Carlos.

Hi,
Thank you, Once_was_lost, but it doesn't work either. I tried it yesterday as an option (I think you're referring to the options of those apps in the settings app).
The problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
* I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
* Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
I can download with the same user in the PC, in the iPhone... but not in the iPad .
I'm getting mad...

Hi i need help on BAPI to Update the ADRT & ADR6 tables

hi,
i need help on BAPI to Update the ADRT & ADR6 tables
these are the fields to be updated
ADRT-Remark Table
ADR6-SMTP_ADDR
ADR6-DFT_RECEIV
Please guide me what parameters to be passed to update
ADR6 & ADRT tables

Look at this function Group
<b>BUBA_3                         SAP BP: External BAPI Function Modules     </b>
BAPI_BUPA_ADDRESS_ADD          SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE       SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GET_NUMBERS SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_GETDETAIL    SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_REMOVE       SAP BP, BAPI: Delete Address
BAPI_BUPA_ADDRESSES_GET        SAP BP, BAPI: Determine All Addresses
BAPI_BUPR_CONTP_ADDR_ADD       SAP BP, BAPI: Add Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDR_CHANGE    SAP BP, BAPI: Change Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDR_GETDETAIL SAP BP, BAPI: Read Contact Person Relationship Addresses
BAPI_BUPR_CONTP_ADDR_REMOVE    SAP BP, BAPI: Delete Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDRESSES_GET SAP BP, BAPI: Read Contact Person Relationship Addresses
BAPI_BUPR_EMPLO_ADDR_ADD       SAP BP, BAPI: Add Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_CHANGE    SAP BP, BAPI: Change Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_GETDETAIL SAP BP, BAPI: Read Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_REMOVE    SAP BP, BAPI: Delete Employee Relationship Address
BAPI_BUPR_EMPLO_ADDRESSES_GET SAP BP, BAPI: Read Contact Person Relationship Addresses
Look also at OSS <a href="https://service.sap.com/sap/support/notes/306275">Note 306275 - Transferring address data</a>
Regards

I have a new mac air, updated the software, have downloaded Pages & Numbers but cannot read .wps documents received from friends.... wps docs are from Microsoft Works word processor.

I have a new Mac Air, updated the software, downloaded Pages & Numbers but cannot open .wps documents from friends. .wps is the format used by Microsoft Works word processor. Can anyone open .wps on Lion?

Only MsWorks opens .wps on the PC, what chance has Mac OSX got?
http://www.microsoft.com/download/en/details.aspx?id=12
To convert them to something readable.
Peter

Need help Flashing to MSI's new Bios revsion for the MSI GT70 0NC

MSI just came out with a new bios revision for the MSI GT70 0NC I was wanting to know which bios revision is for my MSI notebook?

Hello again my friend, yes it's me again. Here's a screenshot from our last bios flash you helped me out with. Remember I have Windows 8 and still used the MSI flashing tool because I have the older MSI GT70 0NC So I was wanting to know which of the new ones I can obtain and download for my notebook again.

BETA BIOS Releases for the MSI 870A-G54 Mainboard [MS-7599 PCB v3.1/4.0]

The latest BETA Release for the MSI 870A-G54 Mainboard is currently: A7599AMS.HE3 [=v17.14b3].
Changelog:
A7599AMS.HD0 [v17.13] ---> A7599AMS.HE3 [v17.14b3]
- Add new bom
- Fix the raid function fail.
- Fixed CPU Frequency display error in CPU Specifications.
- Fixed HDT45TWFK6DGR,HDT65TWFK6DGR,ADX640WFK42GR adjust cpu ratio error.
- Fixed the current CPU frequency information incorrect in Cell Menu group when update to AGESA Orochi 0.0.7.5.
- Fixed AM3+ CPU ratio error under CPU-Z information.
Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results.

E7676IMS.163 --> E7676IMS.164
* Adjust Lowest GT Ratio for different CPU.
* Fix OC menu can't select down(when OC Genie Button Operation Enabled).
* Fixed clear CMOS POST1 CPU Speed:0*31=0MHz.
* Fixed Intel SNB Q0 CPU (Q1CX/QAQC) can't boot & S3/S4 fail.
E7676IMS.164 --> E7676IMS.165
* Update Memory Initialize Reference Code to version:1.2.2.00
* Add U-key function support USB3.0
* Fix the issue when Onboard LAN controller is set to Disabled then PCI LAN option rom does not appear under DOS mode.
* Hide the item "Super IO Chip".
E7676IMS.165 --> E7676IMS.166
* Remove USB3.0 Legacy Mode Support item.
* Fix Resume From S3/S4/S5 by PS/2 Mouse/KB issue.
E7676IMS.166 --> E7676IMS.160
* Release MP BIOS.
E7676IMS.160 --> E7676IMS.171
* Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
* Fixed UKEY compatible issue.
E7676IMS.171 --> E7676IMS.172
* Fixed default DRAM voltage incorrect issue when used low voltage memory.
* In order to unify the spec, Change String "CPU Min.Fan Speed(%)" to "CPU Min.Fan Speed" and change its values(ex: 62.5 -> 62.5%).
* Remove extra Solution for Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
* CPU ratio shows 60/61/62/63 in BIOS info area, if "Adjust CPU ratio in OS" is enabled.
E7676IMS.172 --> E7676IMS.173
* Fix factory INT15 tool test Hang issue.
* Fixed the BIOS Setup Green Power group volt information show N/A issue when use User Password.
* Fixed OS device manager USB 3.0 device show yellow exclamation point when disable USB controller item.
* Fixed the motherboard needs clear cmos after just can normal boot when under the S3 mode and turn off the Power.
* Fixed the pcie gen2 speed change to pcie gen1 issue when the S3 resume after.
Please note that flashing this release occurs entirely at your own risk! >>>Use the MSI HQ Forum USB Flasher<<<
Do Not use the BIOS/UEFI integrated M-Flash Routine.

How to update the data base table with data

i have two ztables, one is zfm_kfz and other one is zfm_kmvrg
zfm_kfz is maintained by using table maintenance generator as well as alv grid control for list display.
zfm_kfz the field r like this KFZR, GERAET, KOSTENTRAEGER, BEZEICHNUNG, TUVDATUMMMYYYY, ASUDATUMMMYYYY, KMSTAND, HISTO AND REIFEN.
PROBLEM: all the data in grid control r updated except KMSTAND
fields in zfm_kmvrg are kostentraeger, kfznr and kmstand i m creating table control for this screen here what ever enter the last km stand is updated in the list.for one kfznr many kostentraegers and kmstand, the last km stand is updated here , go through this code plz hepl me
CONTROLS tabctrl TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF tabctrl-cols,
      lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF zfm_kmvrg,
      fs_itab LIKE LINE OF itab,
      fl_change TYPE c,
      fl_error TYPE c.
*TABLES fs_itab.
LOOP AT tabctrl-cols INTO cols.
cols-screen-input = '0'.
MODIFY tabctrl-cols FROM cols INDEX sy-tabix.
ENDLOOP.
*SELECT * FROM spfli INTO TABLE itab.
CALL SCREEN 100.
MODULE status_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_101'.
DESCRIBE TABLE itab LINES lines.
tabctrl-lines = lines.
ENDMODULE.                    "status_0100 OUTPUT
MODULE cancel INPUT
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.                    "cancel INPUT
MODULE read_table_control INPUT
MODULE read_table_control INPUT.
MODIFY itab FROM fs_itab INDEX tabctrl-current_line.
ENDMODULE.                    "read_table_control INPUT
MODULE user_command_0100 INPUT
MODULE user_command_0100 INPUT.
DATA:
    lw_index TYPE i.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'ADD'.
      LOOP AT tabctrl-cols INTO cols.
        cols-screen-input = '1'.
        MODIFY tabctrl-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
      CLEAR fs_itab.
      APPEND fs_itab TO itab.
    WHEN 'SAVE'.
      IF NOT itab[] IS INITIAL.
        LOOP AT itab[] into FS_ITAB.
          lw_index = sy-tabix.
          IF NOT fs_itab IS INITIAL.
            MODIFY ZFM_KMVRG FROM fs_itab.
            IF sy-subrc EQ 0.
              UPDATE ZFM_KFZ set kmstand = fs_itab-kmstand
                                    WHERE kfznr = fs_itab-kfznr.
            ELSE.
              fl_error = 'X'.
              WRITE:/ 'The record number', lw_index,
                      'has not been updated'.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ELSE.
        MESSAGE s000(0) WITH 'No data is present to update'.
      ENDIF.
ENDCASE.
IF fl_error = 'X'.
    LEAVE TO LIST-PROCESSING.
ELSE.
    MESSAGE s000(0) WITH
          'All the records have been updated successfully'.
ENDIF.
ENDMODULE.                    "user_command_0100 INPUT
IN SE51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB INTO fs_itab WITH CONTROL tabctrl.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
    module read_table_control.
ENDLOOP.
module user_command_0100.
i m trying many times i m not getting proper output, plz help me on this

Hi,
I am hereby givng the similar sample code.Check this with your requirement.
In the flow logic of the screen 9000, write the following code.
PROCESS BEFORE OUTPUT.
MODULE set_status.
MODULE get_t_ctrl_lines.
LOOP AT i_makt WITH CONTROL t_ctrl CURSOR t_ctrl-current_line.
* Dynamic screen modifications
    MODULE set_screen_fields.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT i_makt.
    FIELD i_makt-pick MODULE check.
    FIELD i_makt-zmatnr MODULE zmatnr .
ENDLOOP.
MODULE user_command_9000.
In the program, write the following code.
PROGRAM SAPMZTC MESSAGE-ID zz.
* Tables Declaration
TABLES: zzz_makt.
* Internal table Declaration
DATA : i_makt TYPE STANDARD TABLE OF zzz_makt WITH HEADER LINE.
* Table control Declaration
CONTROLS: t_ctrl TYPE TABLEVIEW USING SCREEN '9000'.
* Variable Declaration
DATA : flg,           "Flag to set the change mode
       ln TYPE i.     "No. of records
*&      Module get_T_CTRL_lines OUTPUT
* Populating data
MODULE get_t_ctrl_lines OUTPUT.
SELECT zmatnr zmaktx
         INTO CORRESPONDING FIELDS OF TABLE i_makt
         FROM zzz_makt.
DESCRIBE TABLE i_makt LINES ln.
* To make the vertical scroll bar to come on runtime
t_ctrl-lines = ln + 100.
ENDMODULE.                 " get_T_CTRL_lines OUTPUT
*&      Module USER_COMMAND_9000 INPUT
* Triggering event according to the user command
MODULE user_command_9000 INPUT.
DATA :lv_fcode LIKE sy-ucomm,    "Function Code
        lv_answer(1) type c.       "Storing the answer
lv_fcode = sy-ucomm.
CASE lv_fcode.
    WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
      flg = 'Y'.
    WHEN 'DELETE'.
* Setting the flag to make the table control in editable mode after
* deleting the selected line
      flg = 'Y'.
* Confirmation of delete
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
         TITLEBAR       = 'Confirm'
         text_question = 'Are you sure to delete from database?'
         TEXT_BUTTON_1 = 'Yes'(001)
         TEXT_BUTTON_2 = 'No'(002)
        IMPORTING
         ANSWER         = lv_answer.
      if lv_answer eq '1'.
* Updating the database table from the internal table
        UPDATE zzz_makt FROM TABLE i_makt.
* Deleting the selected row from the internal table
        DELETE i_makt WHERE pick = 'X'.
* Deleting the selected row from the database table
        DELETE FROM zzz_makt WHERE pick = 'X'.
        MESSAGE s005 WITH 'Deleted Successfully'.
      ENDIF.
    WHEN 'SAVE'.
* Inserting new record or updating existing record in database table
* from the internal table
      MODIFY zzz_makt FROM TABLE i_makt.
      MESSAGE s005 WITH 'Saved Successfully'.
    WHEN 'BACK'.
      SET SCREEN '0'.
    WHEN 'EXIT' OR 'CANCEL'.
* Leaving the program
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
*&      Module set_screen_fields OUTPUT
* Setting the screen fields
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
    IF flg IS INITIAL.
      screen-input = 0.
    ELSEIF ( flg EQ 'Y' ).
      IF ( ( screen-name = 'I_MAKT-ZMAKTX'
             OR screen-name = 'I_MAKT-CHECK1' )
            AND t_ctrl-current_line LE ln ) .
* Making the screen fields as editable
        screen-input = 1.
      ELSEIF ( ( screen-name = 'I_MAKT-ZMATNR' )
                 AND t_ctrl-current_line LE ln ).
* Making the screen field as uneditable
        screen-input = 0.
      ENDIF.
    ENDIF.
* Modifying the screen after making changes
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " set_screen_fields OUTPUT
*&      Module zmatnr INPUT
* Appending records to the internal table
MODULE zmatnr INPUT.
MODIFY i_makt INDEX t_ctrl-current_line.
IF t_ctrl-current_line GT ln.
    READ TABLE i_makt WITH KEY zmatnr = i_makt-zmatnr.
    IF sy-subrc NE 0.
* Inserting record if it does not exist in database
      APPEND i_makt.
    ELSE.
     MESSAGE i005 WITH 'Material Number' i_makt-zmatnr 'already exists'.
    ENDIF.
ENDIF.
ENDMODULE.                 " zmatnr INPUT
*&      Module set_status OUTPUT
* Setting the GUI status
MODULE set_status OUTPUT.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'ZTITLE'.
ENDMODULE.                 " set_status OUTPUT
*&      Module CHECK INPUT
* Modify the internal table using the current line in table control
MODULE check INPUT.
MODIFY i_makt INDEX t_ctrl-current_line.
ENDMODULE.                 " CHECK INPUT

How to refer to fact table to update the same fact table

Here is my scenario. Fact table is having measures basic_sal, Tax, net_sal with dimension key to employee dimension.
I neet to update the net_sal = basic_sal - tax in fact table.
I tried to do a map with fact_table as source and also target. but after deploying the map, it's not updating the net_sal to the existing rows. It's inserting the new rows with dimension key and net_sal columns. so now fact table is having the double the existing rows.
Thanks,
Srini.

Ola Srini,
We have some experience that updating a table while using that same table as source often takes a lot of time... Specially when the table contains a lot of data (which is mostly the case with fact tables).
You can use two solutions. Expand the mapping u use to fill the fact table... The calculations looks not that complex to me... But I could be wrong.
Other solution is to create a temp table where you store all sal types. You could load the fact table from this temp table. Disadvantage of this solution is maintenance of the temp table...
Regards,
Moscowic

Toshiba Satellite L505D-S5965 - Are there any newer BIOS Failure updates? Last update was 2011

I have a Toshiba Satellite L505D-S5965 and got the BSOD. I have searched the forums and found a post;
BIOS Update Failure Satellite L505D-S5965
I tried creating a "Boot CD-ROM Installation Method Create CD-ROM Now but the webpage is no longer there.
I am having the exact same problem as the above post. The keyboard is not functional once you get past the Toshiba screen.
I followed the following instructions:
‎04-07-2011 06:57 PM - Reflash for INSYDE BIOS.
Using a separate computer if necessary perform the following:
1) Download your notebook model's BIOS "*.exe" file from the Support section. Mine was: slm0v150.exe
2) Extract the files from the "*.exe" file.
3) Locate the file that ends with ".fd", this is your actual BIOS file.
*(for different brand BIOS's the file may have a different extension such as .rom or .bin)
4) Rename your BIOS file to: "BIOS.fd" without the quotations.
5) Format a USB Flash Drive to (FAT or FAT32) file system.
6) Copy your newly named "BIOS.fd" file to the root directory of the Flash Drive. (Not inside any folders)
On the corrupt computer perform the following:
7) Remove the Battery, AC Adapter, and Hard Drive.
8) Plug the Flash Drive with your "BIOS.fd" file on it into any USB port.
9) While holding the Fn and F key on your keyboard:
a) Plug the AC adapter into your computer.
b) Hold the Power button until the computer turns on.
c) Release the Power button and both keys once you hear the fan turn on.
10) Observe your Flash Drive's LED's blinking, wait until your computer turns off and remove the Flash Drive.
11) Replace Battery and Hard Drive.
12) You're computer should be all set!
I can punch F2 to enter BIOS or F12 to enter Boot Manager, but the system doesn't respond to keyboard in either.
I attempted to flash BIOS off a USB as described in the above mentioned post, and it never worked. My flash drive lights up and then goes off. The BIOS version is the most current available according to Toshiba, 1.5
When I removed the HD and don't have a Recory disc in the DVD drive, I get:
"PXE-E61 Media Test Failure, check cable
hPXE-M0F: Exiting PXE ROM.
No Bootable device -- insert boot disk and press any key"
This is the same with the BIOS flash drive or without."
I have searched for any follow ups beyond the above post and can't find any. I appreciate any help, thank you in advance.
Kindly,
LaptopJ

Reflash for INSYDE BIOS.
Using a separate computer if necessary perform the following:
1) Download your notebook model's BIOS "*.exe" file from the Support section. Mine was: slm0v150.exe
2) Extract the files from the "*.exe" file.
3) Locate the file that ends with ".fd", this is your actual BIOS file.
*(for different brand BIOS's the file may have a different extension such as .rom or .bin)
4) Rename your BIOS file to: "BIOS.fd" without the quotations.
5) Format a USB Flash Drive to (FAT or FAT32) file system.
6) Copy your newly named "BIOS.fd" file to the root directory of the Flash Drive. (Not inside any folders)
On the corrupt computer perform the following:
7) Remove the Battery, AC Adapter, and Hard Drive.
8) Plug the Flash Drive with your "BIOS.fd" file on it into any USB port.
9) While holding the Fn and F key on your keyboard:
a) Plug the AC adapter into your computer.
b) Hold the Power button until the computer turns on.
c) Release the Power button and both keys once you hear the fan turn on.
10) Observe your Flash Drive's LED's blinking, wait until your computer turns off and remove the Flash Drive.
11) Replace Battery and Hard Drive.
12) You're computer should be all set!

Problem in changing(updating) the data in table control

Dear ABAP Experts,
I have a screen with 2 tables fields. 1st table(ZESTHEADER) fields are normal fields in the screen.
2 nd table fileds(ZESTDETAILS) are table control fields in the same screen .
Now i can update the 1st table fields(ZESTHEADER) succesfully But 2 nd table fields(ZESTDETAILS) are not at all updating. please review the below code and let me knwo where iam wrong.
FLOW LOGIC:
PROCESS BEFORE OUTPUT.
loop at itab1 with control VCONTROL CURSOR VCONTROL-CURRENT_LINE.
MODULE STATUS_0100.
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
loop at itab1.
endloop.
module mod1.
module user_exit.
CODE:
PROGRAM ZEST_HEADER2 message-id ymsg.
tables: zestheader,zestdetails.
data: itab like zestheader occurs 0 with header line.
data: itab1 like zestdetails occurs 0 with header line.
controls: vcontrol type tableview using screen '100'.
MODULE USER_COMMAND_0100 INPUT.
case sy-ucomm.
    when 'ENTR'.
    refresh itab.
      select * from ZESTHEADER INTO ITAB where ESTMATE_NBR = ZESTHEADER-ESTMATE_NBR.
        append itab.
      endselect.
      if itab is not initial.
      refresh itab1.
      SELECT * FROM ZESTDETAILS INTO table ITAB1 for all entries in itab wHERE ESTMATE_NBR = itab-ESTMATE_NBR.
select * from zestdetails INTO ITAB1 where ESTMATE_NBR = itab-ESTMATE_NBR.
        append itab1.
     endselect.
      endif.
    when 'UPDA'.
      move zestheader to itab.
      append itab.
     update zestheader from table itab.
      move-corresponding zestdetails to itab1.
     update zestdetails from table itab1.
append itab1.
      if sy-subrc eq 0.
        message s002(ymsg).
      else.
        message e003(ymsg).
      endif.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZESTCHNG'.
SET TITLEBAR 'ZESTCHNG2'.
MOVE-CORRESPONDING ITAB TO ZESTHEADER.
MOVE-CORRESPONDING ITAB1 TO ZESTDETAILS.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE User_exit INPUT.
case sy-ucomm.
    when 'EXIT'.
      leave program.
endcase.
ENDMODULE.                 " User_exit INPUT
*&      Module mod1 INPUT
      text
MODULE mod1 INPUT.
ENDMODULE.                 " mod1 INPUT

Hi Ramesh,
For performance : Change the code.
1.   select * from ZESTHEADER INTO table ITAB
      where ESTMATE_NBR = ZESTHEADER-ESTMATE_NBR.
2. if itab is not initial.
      refresh itab1.
         SELECT * FROM ZESTDETAILS INTO table ITAB1
          for all entries in itab wHERE ESTMATE_NBR = itab-ESTMATE_NBR.
      append itab1. No need of append itab1 here.
3.This part i am not able to under stand.
    when 'UPDA'.
        move zestheader to itab.
          append itab.
Above code by writing move zestheader to itab" how data will move from database table"
***In below code without loop how you are moving data to internal table itab1.
            update zestheader from table itab.
             move-corresponding zestdetails to itab1.
          update zestdetails from table itab1.
           append itab1.
if sy-subrc eq 0.
message s002(ymsg).
else.
message e003(ymsg).
endif.
I think you have not pasted full code

Is there any User Exit to update the SGTXT of table BSEG while doing F110

Hi,
I have a requirement of updating the item text of BSEG table while doing the payment run with transaction F110. Anybody tell me the user exit name if there is any.
Thanks,
srinivas.

I responded in your other thread as well...
I suggest you to make use of BTE 00001120. You can find documentation
for the usage of this event in transaction BERP, enter process
interface 00001120 > execute > Keep cursor on the event 00001120 and
then click documentation.
Hope that helps,
Jon

Function module for updating the values in table VTTK

Hi,
I am working on a report in which I need to update the value of field tdlnr of table vttk for a particular shipment number. I need to do this using functional module and I am not been able to find one. If anyone knows answer to this plz help.
Thanks in advance,
Priyanka.

As noted above, RETURN table must be supplied empty, it is for BAPI to return the messages back to the calling program. You simply need to define an internal table, pass it to BAPI as is and then analyze this table after the BAPI call. For example:
DATA: BEGIN OF it_return OCCURS 0.
        INCLUDE STRUCTURE bapiret2.
DATA: END OF it_return.
CALL FUNCTION 'BAPI_SHIPMENT_CHANGE'
<...>
TABLES
<...>
    return = it_return.
LOOP AT it_return.
MESSAGE
       ID      it_return-id
       TYPE    it_return-type
       NUMBER it_return-number
   WITH
               it_return-message_v1
               it_return-message_v2
               it_return-message_v3
               it_return-message_v4.
ENDLOOP.
Hope this helps.

New BIOS release - "Updated the ACPI SLIC table"

Similar Messages

Maybe you are looking for