New Bios Request For N560GTX-Ti TF II (Artifact and PC Hang when using firefox)

I encountered the problem 3 times for the past three days as I was forced to do a hard reset.
I am surfing flash videos on firefox and suddenly the screen go green, purple and red flickering 'dots and strips', the mouse cursor stay alive for a second, then it stops, i cant do anything except a hard reset.
Display driver : ForceWare 296.10
BIOS : 70.24.0A.00.00 (P1040-0050)
s/n: 602-V238-16SB1101057250
Device ID 1200
Sub vender ID 1462
Sub System ID 2382
880 MHz Core
1024MB GDDR5 4200MHz Memory
Win7 x64
my bios: http://www.mediafire.com/?bi5hu0as2ymr9th
Intel i7-2600
Asus P8P67 LE
2gb Kingston memory X 2
Cooler Master Extreme Power Plus 500W
can Svet get me the new bios?
thanks!

Quote from: magicarshavin on 28-March-12, 06:15:26
After updating to the latest bios 201, the mouse movement feels sluggish, can i revert back using my backup bios GF114.bin (GpuZ) ?
Is it using the same command nvflash.exe -4 -5 -6 GF114.bin in USB boot dos will do?
Thanks.
Yes, that's right.
But the mouse movement feels sluggish is probably caused by something else rathar that vbios.
I suggest you to preinstall VGA drivers.
Remove current one 1st in Safe Mode with >>Driver Sweeper<< before install the new VGA drivers

Similar Messages

N560GTX-Ti Twin Frozr II/OC Driver Failure when using Firefox

I just bought this card a couple of days ago. Seems to run good with a minor exception that scares me a little. 3 or 4 times in the last 12 hours I have gotten a video driver error while using Firefox. It even happened once while posting this message...hate when that happens. The screen goes blank for a few seconds and then recovers...Says something like "Display driver stopped responding....recovered..." and it shows my driver version # in the message.
I am using the beta diver 290.36 and will switch back to the latest standard release tonight to see if it's something to do with the beta....but I don't think so...anybody? I'll let ya know how that goes.
I have a few questions:
1) I've read other posts with the same/similar error. One post said that a bios update "seemed to fix" it. Really??..a risky BIOS update to fix a DRIVER error...hmmm. I'll do it if I have to....but is it really necessary?
2) Where do I find the latest bios for my card?
3) What's up with Live Update 5....it doesn't do anything except for launch.
4) What's the safest way to flash the bios (USB Flasher?)
5) What are common idle and load temps for this card?
Rig specs:
Asus P8P67Pro B3 Rev
CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9
Cooler Master GX Series 650W
MSI N560GTX-Ti Twin Frozr II/OC
Windows 7 x64
TIA,
Cap

Well maybe it's driver or I don't know.
But for sure, that I know is this:
1. Was running W7 x32 with latest drivers (or if newer appeared last 1-2 days, I was using former), there was no driver recovery.
2. Now running W7 x64 with 275.33, because latest(as said above), gave me that recovery problem.
3. My friend uses some ASUS GT430(or GTX), also on W7 x64 with latest, also gives him recovery. 275.33 gave him none.
That is why I suspect on drivers when go sudden downclock (adaptive mode in nV CP). As I've noticed from GTX 560 Ti HWK(non-oc model), that clock from 822(850 I oc'd a bit) suddenly go to 50. Memory also, but forgot to how much.
Maybe this sudden downclock (less voltage/amp drain) triggers something in windows (the famous...forgot wat is called - also on Vista) that crashes driver. Or BSOD if that "Windows feature" is disabled.

New BIOS request for the 290X Lightning

Serial number: 602-V307-04SB1403018994
Original vbios: dropbox.com/s/qoum85h4faq9shl/Hawaii.rom
Thank you.

You can use this: https://forum-en.msi.com/index.php?topic=179761.msg1295014#msg1295014

"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G

"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
S/N: 602-V277-310B1407096530
Installed BIOS: TV277MS.3A0
Hi,
I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
I have to use "Legacy" mode because of my PC does not start otherwise.
Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
Thank you.

here is .3A1
TV277MS.3A1 legacy
TV277MH.3A1 uefi
flash guide:
Quote
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
Rename TVxxxxx.zzz to zzz.rom.
Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios.

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

SLI issue with N660Ti-2GD5/OC (new bios request)

Hi,
It started all with issue regarding SLI performance under F1 2012 game.
When SLI is enable I can't get more then 30FPS average. I try changing SLI rendering mode with no luck... nothing change.
I noticed that when SLI is enable I only get 25% GPU usage per card and my 3D GPU clock is not reaching MSI declare speed.
When SLI disable everything is working normally. I get 58FPS average, 95-100% GPU usage and my 3D GPU clock is working at MSI declare speed (I think it is 1020MHz).
So I suppose that this is negative SLI scaling...
I was doing some testing and SLI (I have enable show SLI visual indicator) doesn't work properly in any game that I have install on my pc (F1 2010, BF3, BC2 and NFS Shift).
I have same issue in all games: low gpu usage, 3d clocks doesn't reach declare speed (with three, two or only one monitor connected).
So next I installed Heaven Benchmark 4.0 and started testing and for some unexplainable reason SLI is working normally.
After that I started games again but no GO ... again in games SLI is not working correctly.
I was thinking that maybe my SLI profile are not working right... so I decided to change driver, I try 320.14 and 314.22 nothing change - SLI not working correctly.
Then I download nvida inspector and try to define SLI profile for those games - nothing change - SLI still not working correctly.
I even try to disable first card through device manager so I can test the second card and vice verse, separately both cards are working normally.
So only in Haven benchmark 4.0 SLI is working correctly I have GPU usage of 95% and declare speed for 3D clocks.
I have Win8x64 (fresh install), nothing overclocked, I enable Prefer maximum performance in nVidia drivers and disable V-sync. CPU Fx-8350, Asus sabertooth fx990 rev.2 (latest bios), 1200W chieftec power supply and everything is properly connected.
Is there a new bios release for my cards? Maybe this could solve my issue? And who can supply me with new bios?
Sorry for long post but I am really desperate... any thoughts or maybe solution.
Regards

Well my monitor doesn't support more then 1680x1050, but still if this is the case I think that ATI is the way to go... my humble opinion.
So now I can sell my second card because SLI doesn't work... I am totally depressed.
Ok but can someone please,please supply me with new firmware for the cards? I just one to try it just to know that I tried everything before I go and sell those cards and go for ATI solution.
Regards

How to assign a new transport request for a program saved in $tmp mode

Hi all,
How to assign a new transport request for a program saved in $tmp mode?

Hi,
delete the object fro the package $tmp.
go to change mode, save it.
while saving it will ask for teransport id.
thanks
vinod

Need help Flashing to MSI's new Bios revsion for the MSI GT70 0NC

MSI just came out with a new bios revision for the MSI GT70 0NC I was wanting to know which bios revision is for my MSI notebook?

Hello again my friend, yes it's me again. Here's a screenshot from our last bios flash you helped me out with. Remember I have Windows 8 and still used the MSI flashing tool because I have the older MSI GT70 0NC So I was wanting to know which of the new ones I can obtain and download for my notebook again.

New BIOS Update for the Z61m Series

Hi,
I have a problem with the downloading of the new BIOS Update for above mentioned notebook. Lenovo provides the version 2.25, but only via BIOS utility (exe-File), although a link to bootable CD exists. Can anyone confirm this or can help me?
Do anyone know a possibilty to contact lenovo/ibm in an easy way (not by contact form)?
Thanks in advance,
AfterBurner

I have the same problem! Will try wit System Update!

New BIOS firmware for B590 Notebook (20206)

Hello.
Where can I find new BIOS firmware for B590 Notebook (model 20206)? support.lenovo.com provides an earlier version (08 Oct 2012), but I need at least the same as in the notebook now (15 Nov 2012).
Just wait for a new firmware becomes available at lenovo.com?
How can I find out when it will happen or whether happen at all?
Or at least how to save the current BIOS? Preferably by regular means. It looks like Lenovo utility can only update (and reported that the installed firmware is fresher).
Thanks.

Still nothing. Is there any hope?

UEFI bios request for N780 TF 3GD5/OC

UEFI bios request for N780 TF 3GD5/OC
S/N: 602-V298-010B1308089788
ROM: 80.10.37.00.15 (P2083-0020)

Quote from: Marski69 on 14-May-14, 01:44:02
Hi Svet
Any chance that my Bios is the same?
And i can use it?
Can i post my Bios.rom?
Tnx for reply!
Em, we don't have a second sight... You need to at least supply some info on your card namely S/N and a copy of your vbios saved to file (that you uploaded to some file hoster and added link here).

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

Erica,
     I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
     I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
     It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
     Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
     I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
   For the rest of us, please post when you find a solution.
     Best.
     BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

I loaded iTunes on a new laptop. I copied and pasted my albums to a 4G stick and down loaded them to the new laptop. Placing them in, Libraries – Music – iTunes and than in Itunes used File – add file to library. So far so good. For what ever reason one o

I loaded iTunes on a new laptop. I copied and pasted my albums to a 4G stick and down loaded them to the new laptop. Placing them in, Libraries – Music – iTunes and than in Itunes used File – add file to library. So far so good. For what ever reason one of the CDs would not load onto the stick. I got the orginal CD and loaded directly to Itunes. Now when I look in Libraries – Music – iTunes it’s not there but it is in and plays in iTunes. What should I have done or should I be doing? Thanks.

It's not a unique situation - happens all the time, smaller hard drives getting filled up.
It's also easy to fix. I just moved my itunes content to a bigger hard drive.
First I made a backup of the itunes database file - iTunes Library.itl. Just in case anything went wrong.
Nothing did go wrong, but I'd have it in case anything DID go wrong. That file holds ratings, playcounts, Date Added, and other metadata.
Second, in itunes change the preferences > advanced tab to tell itunes to put everything on G:
Set the itunes folder location to something like G:Media or G:iTunes
This will affect all FUTURE additions to itunes and not do anything to the existing locations.
Make sure the checkbox for "Keep itunes organized" is NOT checked. I also left the "Copy files when adding" unchecked.
Third, to move all the files to G: without itunes losing the paths, run the File > Library > Organize > Consolidate command. This will need to run a while, so be patient as it copies all the files to the new G: location. This does NOT delete the originals. You will have to do that.
Fourth, make sure everything in itunes is OK and you can play stuff in your library. If you're really cautious you can run a script to check for missing/dead tracks.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.

Hi I'd like to jump in here. Your app showed me this:
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
          Destinations:
                    Plastic Wrapper [Local] (Last used)
                    Total size: 999.86 GB
                    Total number of backups: 64
                    Oldest backup: 2013-07-24 23:25:11 +0000
                    Last backup: 2013-11-17 01:40:47 +0000
                    Size of backup disk: Too small
                              Backup size 999.86 GB < (Disk used 453.81 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
          /sbin excluded from backup!
          /usr excluded from backup!
          /System excluded from backup!
          /bin excluded from backup!
          /private excluded from backup!
          /Library excluded from backup!
          /Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy

When using Firefox, a new window to the Firfox support page opens at random intervals.

When using Firefox for normal web browsing, a new window to the Firefox support home page opens at random intervals. This occurrence can happen at odd intervals, from a few minutes, to hours apart. There does not appear to be any correlation as to which sites I'm visiting. I am not aware of touching any keyboard key (other than using the mouse) and this new Firefox support window pop-up seems to happen completely randomly. It happens about 10 times a day and is very annoying.

I have this problem as well, when ever I open Firefox. This has been going on for 2-3 days, and I simply select 'skip' and it goes away.
What is more bothersome is that now I am unable to organize my bookmarks, they no longer show up when I click on 'Organize Bookmarks'. My bookmarks still show up in the 'bookmarks' toolbar however.
I wonder if these two glitches are related?

New Bios Request For N560GTX-Ti TF II (Artifact and PC Hang when using firefox)

Similar Messages

Maybe you are looking for