New Bios Request | SPLIT
Hi,
I have the same problem (pink/purple/green flickering ) except that I am using Google Chrome viewing some videos from youtube. And the driver that I am using is version 295.73. I already tried 296.10 but I encountered TDR that's why I go back to 295.73.
GPU-Z screenshot of my VGA --->
My BIOS ---> http://www.mediafire.com/?qlcc2q4j1yqhepn
S/N: 602-V238-270B1109140158
OS : Windows 7 Ultimate x64
MBoard : ASUS P8Z68-V
RAM : 8GB G.Skill
PSU : Corsair HX 850
I already asked for help at nvidia forum and they said I ask for a new bios here. Thanks!
Topic splited. next time don't hijack other people topics, open your own instead.
Dunno about this one, contact msi tech here: http://support.msi.com/
Similar Messages
-
SLI issue with N660Ti-2GD5/OC (new bios request)
Hi,
It started all with issue regarding SLI performance under F1 2012 game.
When SLI is enable I can't get more then 30FPS average. I try changing SLI rendering mode with no luck... nothing change.
I noticed that when SLI is enable I only get 25% GPU usage per card and my 3D GPU clock is not reaching MSI declare speed.
When SLI disable everything is working normally. I get 58FPS average, 95-100% GPU usage and my 3D GPU clock is working at MSI declare speed (I think it is 1020MHz).
So I suppose that this is negative SLI scaling...
I was doing some testing and SLI (I have enable show SLI visual indicator) doesn't work properly in any game that I have install on my pc (F1 2010, BF3, BC2 and NFS Shift).
I have same issue in all games: low gpu usage, 3d clocks doesn't reach declare speed (with three, two or only one monitor connected).
So next I installed Heaven Benchmark 4.0 and started testing and for some unexplainable reason SLI is working normally.
After that I started games again but no GO ... again in games SLI is not working correctly.
I was thinking that maybe my SLI profile are not working right... so I decided to change driver, I try 320.14 and 314.22 nothing change - SLI not working correctly.
Then I download nvida inspector and try to define SLI profile for those games - nothing change - SLI still not working correctly.
I even try to disable first card through device manager so I can test the second card and vice verse, separately both cards are working normally.
So only in Haven benchmark 4.0 SLI is working correctly I have GPU usage of 95% and declare speed for 3D clocks.
I have Win8x64 (fresh install), nothing overclocked, I enable Prefer maximum performance in nVidia drivers and disable V-sync. CPU Fx-8350, Asus sabertooth fx990 rev.2 (latest bios), 1200W chieftec power supply and everything is properly connected.
Is there a new bios release for my cards? Maybe this could solve my issue? And who can supply me with new bios?
Sorry for long post but I am really desperate... any thoughts or maybe solution.
RegardsWell my monitor doesn't support more then 1680x1050, but still if this is the case I think that ATI is the way to go... my humble opinion.
So now I can sell my second card because SLI doesn't work... I am totally depressed.
Ok but can someone please,please supply me with new firmware for the cards? I just one to try it just to know that I tried everything before I go and sell those cards and go for ATI solution.
Regards -
New Bios Request For N560GTX-Ti TF II (Artifact and PC Hang when using firefox)
I encountered the problem 3 times for the past three days as I was forced to do a hard reset.
I am surfing flash videos on firefox and suddenly the screen go green, purple and red flickering 'dots and strips', the mouse cursor stay alive for a second, then it stops, i cant do anything except a hard reset.
Display driver : ForceWare 296.10
BIOS : 70.24.0A.00.00 (P1040-0050)
s/n: 602-V238-16SB1101057250
Device ID 1200
Sub vender ID 1462
Sub System ID 2382
880 MHz Core
1024MB GDDR5 4200MHz Memory
Win7 x64
my bios: http://www.mediafire.com/?bi5hu0as2ymr9th
Intel i7-2600
Asus P8P67 LE
2gb Kingston memory X 2
Cooler Master Extreme Power Plus 500W
can Svet get me the new bios?
thanks!Quote from: magicarshavin on 28-March-12, 06:15:26
After updating to the latest bios 201, the mouse movement feels sluggish, can i revert back using my backup bios GF114.bin (GpuZ) ?
Is it using the same command nvflash.exe -4 -5 -6 GF114.bin in USB boot dos will do?
Thanks.
Yes, that's right.
But the mouse movement feels sluggish is probably caused by something else rathar that vbios.
I suggest you to preinstall VGA drivers.
Remove current one 1st in Safe Mode with >>Driver Sweeper<< before install the new VGA drivers -
MSI GT70 0NC Unlocked Bios Request | Split
Hello Svet. I send you PM but I'm not sure it worked
I need an unlocked Bios for my GT70 model 0NC-002US.
My GTX670M died on me and I ordered a GTX765M ( MSI flashed). I should get it in a week or so
my problem is that I removed the defective GPU because the laptop won't power up if I leave it in the PCi-E slot
but once removed, the laptop runs the Fan full speed at all times. So I need to select the Intel card in the unlocked Bios
could you send me the info / donation procedure please ?
thank youQuote from: p.lemieux on 14-January-15, 04:47:11
Donation done
waiting on your feedback .. thanks
received it, will work on it and back to you after 2-3 hours,
until wait check PM what to prepare
EDIT: It's now done, check PM -
GT60 modified bios request | split
I see MSI released an upgraded bios for the GT60 MS-16F3, if it's the same work already done here, could I donate to have it unlocked as well? E16F3IMS.10U.zip > I'm using a ssd in main bay non-raid. Sorry if posted incorrectly. Thanks
Quote
Noticed that yesterday, though the Win8 50X/70X version are downloading - I know these won't work for my motherboard.
Aha, yes those are not for your NB
Quote
Could I use an unlocked version of my current bios (E16F3IMS.10S) and update to 10U later?
Yes
Quote
The reason for the update doesn't seem to impact me,
Modify F3 recovery function for shrink volume issue.
Just wanting more options in the bios. Feel restricted without them
Oki, will work over it and send back to you when its done. [will take some time 2-3 hours]
EDIT: Check PM -
New BIOS request for the 290X Lightning
Serial number: 602-V307-04SB1403018994
Original vbios: dropbox.com/s/qoum85h4faq9shl/Hawaii.rom
Thank you.You can use this: https://forum-en.msi.com/index.php?topic=179761.msg1295014#msg1295014
-
Hi, I would like to request a new bios for my 270x
S/N 602-V303-070B1404003989where is it located on the card? I cant find the current version in windows because my screen doesn't display because the card doesn't work... I think its v303 ver:1.1
-
hi I have a hp compaq presario sr1710nx I am runing bios for the hp site (01/25/2007 rs482-sb400 amberine-00)
i need to find a newer bios becouse fo video probloms can any one help ?Here are the specs for your Compaq Presario SR1710NX Desktop Computer and its A8AE-LE (AmberineM) motherboard. According to the specs, this model was introduced for sale on or around 27-Nov-2005. The most current version of the BIOS for this model is A8AE-LE BIOS Update v3.15 2007-11-30. This update doesn't indicate that it resolves issue with video problems.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Copy Transport Request to other new transport request
Hi Gurus,
I collected Info Objects, Info Areas, Application Components in on transport request. I want to split Application objects and Info Area into new transport request. So that I can have Info Objects with existing transport request and other objects in new transport request.
I tried in SE01 to include objects but I am not sure which option I need to select. I want to select specific objects to copy to other transport.
Appreciate your help.
Thanks
Ganesh Reddy.Ganesh,
You can delete the Info Objects and info area from the existing transport and collect those in separate transport request by change them .
Go to SE09 and select the Request --> Go to Task and double click --> Go to change mode and delete the info objects and info area ..
Hope it helps ..
Ravi -
One Transport request objects copy into new transport request
Dear Experts,
I created a transport request under which i saved my objects. <b>Now i need to copy old request objects into new request or split that transport request into number of new transport requests.</b> First of all It is possible or not , if it is possible please tell me the solution how to do.
Regards,
KrishnaHello Krishna
You can
(1) add object lists of already released requests ("old" requests) to you current request (still changeable)
(2) merge changeable transport requests together
(3) split a changeable request into several requests
Whereas (1) and (2) are supported by standard functions of the SAP system (3) is a manual task involving the following steps:
a.) Create a new request
b.) Copy required transport entries (e.g. R3TR TABL ZMYTABLE) from one request to the new request
c.) Delete all copied transport entries from the object list of the "first" request
However, if you are not fully aware of the dependencies between different transport object entries the splitting of object lists may cause hassle when you import the splitted requests into the next SAP system.
Regards
Uwe -
Ideapad U330 Power Plug Beep & Laptop hotter on new BIOS?
Dear Lenovo,
I'm BEGGING you to please update for the beeping sound for Power Plug. It's really annoying that such a simple thing can't be removed. Second, my laptop is usually around at 37 Celcius to 47 Celcius. After I installed the new BIOS, it seems that it made my laptop even hotter? It's now 57 Celcius!! I run the same ammount of softwares & programs, and those doesnt even use a lot of my CPU. Please check out your BIOS firmware.
Viet TranJustV,
The request to mute the power beep has been submitted to development previously. I don't have an ETA on when this will be implemented, but will share that when available.
Let's talk about your observations of temperature. How are you measuring temperature? Through software, or somewhere physically on the system case? Are you running on battery or AC & Battery? What level of charge is the battery?
As far as I know, no changes were made in this BIOS that would affect system temps.
What applications are you running?
Have you checked to ensure your fan is running normally? Is warm air exiting the vents on the system?
Has anyone else observed a change in operation after the BIOS update?
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
GOP /UEFI bios request for GTX N770 TF 2GD5/OC
Symptoms: System will not POST after ASUS Z9PE-D8 WD mobo update to latest BIOS. Worked fine previous. System will POST and run fine with other graphics cards.
The card will POST and run fine in ASUS MAXIMUS V GENE mobo with not current bios. With which I have pulled GPU-Z info as required for a BIOS request.
Prompt response greatly appreciated! There is work I need to be doing! Thank you so much.
S/N: 602-v282-220B1308092571
NVIDIA Firmware Update Utility (Version 5.141)
Adapter: GeForce GTX 770 (10DE,1184,1462,2825) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1112 bytes
IFR CRC32 : 189B4216
IFR Image Size : 1536 bytes
IFR Image CRC32 : 4552879D
IFR Subsystem ID : 1462-2825
Image Size : 99328 bytes
Version : 80.04.C3.00.21
~CRC32 : D6321A32
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20050000
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 770
Board ID : E12D
PCI ID : 10DE-1184
Subsystem ID : 1462-2825
Hierarchy ID : Normal Board
Chip SKU : 425-0
Project : 2005-0000
CDP : N/A
Build Date : 06/03/13
Modification Date : 06/18/13
UEFI Support : No
UEFI Version : N/A
UEFI Signer(s) : Unsigned
Board: Asus Z9PE-D8 WS
Bios: Version 5206
VGA: MSI GTX 770 2GB/OC
PSU: Corsair TX750
CPU: Intel Core E5-2687W Default CPU settings, no OC
MEM: Crucial 2133Mhz 16GB
HDD: Kingston HyperX 250GB SSD
COOLER: Thermaltake
OS: Windows 7 64x Pro
Sign-On Message : GK104 P2005 SKU 0000 VGA BIOS
MSINV282MS.352Quote from: flobelix on 19-November-13, 16:07:12
Don't bump your posts: >>Please read and comply with the Forum Rules.<<
I guess you mean ASUS Z9PE-D8 WS and not WD. That is a dual cpu socket XEON workstation board not meant for gaming (hardware). The NV282MS.352 vbios the vga uses is a current one. Contact Asus and report the compatibility issue and maybe they can help you with.
My use of my system is video editing. It uses gpu heavily for encoding. Hence, the hot GFX card I just purchased. I have been in contact several times with Asus, since they also produce an N770 card, and they do not have any known compatibility issues with their own products, at least. The card worked perfectly with this N770 card when it had the previous BIOS. It was when I upped the BIOS to the latest version that I had the issue. Other GFX cards do work. The N770 wont finish POST. 100% fail. I ended up purchaseing a new BIOS chip with the previous bios flashed, since they could not produce a procedure for me to downgrade. However, I will not be able to use new CPUs with the later micro-codes until I find a way to update the BIOS. Otherwise, I would be FD&H with the old one.
Thanks for the reply,
Rod -
UEFI Bios Request for MSI Twin Frozr III HD 7950 O/C Non Boost card, has 7970pcb
Its this one Version: 015.020.000.000.001083 You make this forum far to complicated to navigate for old people , could not figure out how to insert an image, and you can't post external links either. So i linked the bios version, great cards by the way i have two of them, purchased a new motherboard that supports UEFI so I wanted to try. Thanks. More info:
GPU Device Id: 0x1002 0x679A
113-C3861300-X01 113-MSITV277MS.202 TAHITI B0 PROH C38613 GDDR5
3GB 500E/150M
(C) 1988-2010, Advanced Micro Devices, Inc.
ATOMBIOSBK-AMD VER015.020.000.000.001083
C3861300.101 PowerTune Limit: 175 to 260
CCC Overdrive Limits
GPU Clock: 1100.00 MHz
Memory Clock: 1575.00 MHz
Clock State 0 Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Boot Clock State 1
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Optimal Perf Clock State 2
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: UVD Clock State 3
Core Clk: 300.00 MHz
Memory Clk: 150.00 MHz Flags:S/n : 602-v277-05sb1205073711 first card S/n 602-v277-05sb1206017147 for Msi Twin Frozr III Hd 7950 o/c regarding UEFI bios request.
-
"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
S/N: 602-V277-310B1407096530
Installed BIOS: TV277MS.3A0
Hi,
I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
I have to use "Legacy" mode because of my PC does not start otherwise.
Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
Thank you.here is .3A1
TV277MS.3A1 legacy
TV277MH.3A1 uefi
flash guide:
Quote
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
Rename TVxxxxx.zzz to zzz.rom.
Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios. -
How do I get MSI to Send a New BIOS Chip? (EOM)
.
Hi Curbstone -
If you are in the United States, call their technical support number at (626) 581-3001. You'll have the best luck if you get through to a live person. My personal experience at getting a new BIOS chip out of their California Technical Support office was that voice mail messages left at technical support result in no response, e-mail message result in no response, faxed in problem report forms result in no response. When the line was personally answered, I had a new BIOS chip in hand three business days later, free of charge.
If you are elsewhere in the world, click on the Contact Us link at http://www.msi.com.tw .
Another option is to link to http://www.badflash.com and request they send you a replacement BIOS chip. Cost is US$20 plus shipping. It may be necessary to e-mail them the BIOS you wish to have flashed.
The following assumes that you have a K7N420 Pro board (you don't have a sig line to tell otherwise...):
If you know someone with an EPROM burner (or are friendly with a local electronics or computer store that has one) you can download the BIOS image of your choice and have it burned onto a new chip. The chip is either a Winbond 49F002UP12B or a SST 49LF020. The chip is a Plastic Leaded Chip Carrier (or PLCC) module. Shouldn't cost too much (maybe US$10 - 20). You can pull the PLCC module from your board carefully using a small jewelers screwdriver or use a PLCC Chip Puller from Radio Shack - part # 276-2101 (about US$8.).
Jef
Maybe you are looking for
-
Source system BID-010 does not exist
Hi, I have installed BI statistics in BI 7.0 in Dev.While transporting to QA system, I am getting the following error message: "Source system BID-010 does not exist" Can anyone please help!! Thanks, Dipti
-
I have a table containing a blob field. The field have texts and pictures in Acrobat reader format and JPEG format. The forms 6 use an OLE Container to manipulate these data's. I would like the have the same kind of possibilities in the Web environme
-
The multi-tabs is not working. I have the correct options set for multi-tabs. But when I open Firefox and try to add a site from Bookmarks it uses the same tab that is opened.
-
Ability to expand all accordion tabs
It would be great feature for accordions. Sometimes it is good to have all Main categories opened and client can close these what he read. Also it will help for easy rearanging of Tabs and content on minipages. Maybe would be interesting allowed or
-
I have an interesting issue, that hopefully someone can provide some insight. The problem is that the first call to a service from a web site (silverlight) fails with 401. Wireshark traces shows 401 without authentication data, 401 with authenticati