New bios update (f.29) causes my computer to overheat and shut down

New bios update (f.29) causes my computer to overheat and shut down. What should I do? 
This question was solved.
View Solution.

Reflash to the previous version.On your drivers page, beside the BIOS update there should be a link to 'Previous versions'.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • I have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

    have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

    Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.

  • New BIOS update may have cause BlueScreen

    I got a notice on my laptop about a BIOS update and another update. After finishing the installations, i was attempting to play Halo, but when i joined a game server, my laptop BlueScreened.
    It has never crashed before, and im afraid the bluescreen has something to do with the BIOS update, since thats the only significant change ive made to the computer recently.
    Please help! This is a fairly new laptop!

    Well so far its ok. Maybe it was just one of those 1 time errors but i dont know. I dont know the model exactly but i know its a Satellite, and the BIOS update was 1.30 of im not mistaken, but im not sure. Its not having problems now so im not going to worry about it.

  • Why does iPhoto 09 cause a surge protector beep and shut down?

    When iPhoto 09 is launched the Cyber Power surge protector beeps for 10 to 15 seconds and then shuts down. If iPhoto is closed within that time range the beeps stops and the surge protector does not shut the computer down. This only happens when iPhoto is open.

    I received this today from the surge product tech support.
    The power consumption of your computer varies as it performs different actions. Photoshop is specifically programmed to take full advantage of all the cores in a multi core system. Few programs are set up this way yet, though it is becoming more common. The end result is that with all 4 cores working heavily, the power consumption of your computer rises 50 or more watts higher than when only one or 2 cores are being pushed.
    The 425SL is designed to support a maximum load of 230 watts. This is far too small to support a MacPro tower. The 425SL is failing because it is overloading. For good performance you will need a much more powerful UPS. I recommend using something with 600 watts output power at a minimum. MacPro towers often Use power factor correcting (PFC) power supplies. These power supplies are incompatible with standard UPS units. If your MacPro has a FPC power supply you will need to use a Pure Sine Wave UPS. We make a wide range of Pure Sine UPS models. You can view those models here: http://www.cyberpowersystems.com/products/ups-systems/browse-by-category/smart-a pp-ups/pp-series.html
    A Pure Sine Wave 1000 series or 1500 series unit would be a good choice for your system.
    Thank You,
    Pietro Boggio
    Senior Technical Support Specialist
    CyberPower Systems
    877-297-6937 x7914

  • MacBook fan broken (computer overheats and shuts down)

    I'm pretty sure my MacBook has a broken fan. I can't hear it, even when the temp is measuring upwards of 180 degrees, and Fan Control is set to run it at a minimum of 3500 RPM and reads several thousand RPM, even though the fan is off. I think it broke yesterday, but previously there had been strange clicking noises. I can run it for a while when I'm not doing anything intensive (~135°–145°), but when I run BOINC or try to play games, the CPU heats up to over 180° and it powers off in a few minutes. Does anyone else have this problem? Is the fan stuck, or did a wire come loose, or is the fan motor broken?

    They should be able to fix the fan with out doing anything to the drive. They might be able to do it while you wait. I would call and talk to them about it. I personally keep a back up of my system every week and always before a repair. I also have never lost data on a repair yet. I had a fan replaced on a Powerbook and had no problems with my data.
    Thanks for the .

  • Satellite A500-149: Would new BIOS update 2.00-win solve illumination issue

    Hi
    I need help because i have one toshiba A500-149 but the ilumination of keyboard dont work (FN+Z).
    I see a new Bios update and my question is:
    This new update 2.00 win solve that problem?
    this upgrate is secure?

    In my opinion the BIOS 2.0 update does not solve your problem.
    A friend of mine is an A500 owner and the backlight keyboard functions using old BIOS.
    I think there must be another reason for your backlight problem.
    Did you see this knowledge base article?
    http://aps2.toshiba-tro.de/kb0/HTD2603CL0000R01.htm
    in some cases you need to press FN + Y due to different keyboard layout.
    The FN buttons are controlled by value added package as reported by users above...
    Reinstallation of VAP should help you be sure you use the latest VAP recommend using one released for newer series like A660/A665
    But if the VAP does not help, and if backlight is enabled in BIOS, then there must be a hardware issue maybe the 2nd keyboard cable is not connected properly to the backlight connector loose connection might cause this

  • Qosmio X500 - NEW BIOS update - 1.90

    Found a new BIOS update 1.9 on the Australian Toshiba Website. This morning it was showing version 1.40, but now it says version 1.90. I will try it on my X500 when I get home tonight, see if it fixes the Sleep-wake up issue.
    http://www.mytoshiba.com.au/support/notebooks/qosmio/x500/pqx33a-00x00j/download?os=25
    Aaron

    Hey danied...thanks for sharing this....yes I have a Qosmio x500-110 (win7 64 bit) and its been giving the Bluetooth disconnection/ finger print sensor/and webcam not initialised problem since the start.
    Dont know what is causing this problem. I have tired installing all the drivers with no use. All the three get disconnected together. Also there was sum problem with my Bluetooth stack so I downloaded the latest on e from Toshiba website and the software works fine now but once it gets disconnected with the webcam u need to restart.
    This problem is still there...

  • Tecra A9 - What are the changes in the new Bios update

    Can someone tell me the changes in the actualy BIOS Update v1.70 and the old ones?
    And is there a PDF outside where i can see the detailed description about the Bios functions?
    Thanks
    Greetings

    So, until now my question has no answer!
    In the US Forum is the Service from Toshiba is much more better ->
    [BIOS details|http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1978903&moid=1702318&rpn= PTS53U&BV_SessionID=@@@@2130665852.1205800119@@@@& BV_EngineID=cccjadedikgfkdgcgfkceghdgngdgmn.0&ct=D L&all_docs=false]
    I also must send my Tecra A9 to the support to change my DVD-Burner (Teac) and it taks 3 Weeks.
    I am not very happy with this support at all!
    Now Toshiba has released a new Bios Update v2.10 and i didn't now what are the changes.
    Greetings

  • How to disable Toshiba TEMPRO alerts about new BIOS update

    Hi just installed TEMPRO on my W8 Satellite L875 laptop, ant it's saying there's a new bios update available - (1.60-WIN) which is the same version as I've already got.?:|
    Q: how can I make this alert go-away ?
    -Tom

    Thanks, but that's not quite what I had in mind ...
    I would have expected tempro to examine my system & installed components, and to alert me when a new/updated driver is released. I would then install the new/updated driver, and then tempro should dismiss the alert - or perhaps I'm just not understanding how tempro works ?

  • Northbridge temps and the new bios update

    I know the Northbridge temperature issue has been posted before. But I’m posting in relations to the new bios update supposed to be released 08/24. Will these temp issues be resolved in this new bios update?
    There could be many reasons why the Northbridge temps are so high, ranging from bad heatsink design to Northbridge fan blowing too fast. Mine runs 55C idle which is way too high…but when I go to touch the heatsink, it’s barely warm. A lot of people have been complaining about the “light show” on the Northbridge, but heck I like it. I think it’s pretty cool
    One last thing I’d like to bring up, this new bios update, I don’t know whether or not 1.6 supports DDR500mhz Ram (because I don’t have it yet) but will it support it? Reason being is I plan on buying DDR500mhz Ram and do some more overclocking.
    1:1 Cpu to Ram ratio here I COME!!! :D

    ROFLMAO  (first sign of insanity when you laugh about a such sad matter)
    Maesus, its nothing personal, but do you really believe there will be a v1.8 BIOS? To me it looks like MSI has abandoned the 875P. BIOS v1.7 is supposed to come when? ...August 28th? That's 2 months since the last one and as far as I have heard there has not much changed over v1.6. When is v1.8 supposed to come? Another 2 months later? Not to speak of v1.9... That makes about 5 months to get the board working the way it was supposed to do from the first day (if v1.7 solves something at all).
    Sorry, but MSI is about to lose all trustworthiness with this so called support. And moderators in a company's forum who are not even employees of that company, and have to take guesses (see Prescott support) about the products, do not help to make the situation much better (again, nothing personal). If the support team would take a look by themselves on a regularly basis (1-2 times a week) perhaps then the problems would be solved much faster. If I would work like this and not care about the customers I would have lost my job long ago.
    There are still many problems. The board is on the market for some months now and memory compatibility and timings are still an issue.
    I've visited many forums the last week. And I do hear (read) almost the same everywhere: Poeple who bought the 875P board say its high quality and has good features, if it only would work as supposed. MSI miserably fails to give it a working BIOS. Results in polls about "MSI 875P board good or bad" tend to be weighed horribly to "bad". Most of the ppl will never again buy a MSI board because they feel left alone with their problems.
    It is clear that ppl who are satisfied do not post that in forums. But when something is wrong, they do, because they want the problems solved. But what are support forums good for when no one is listening to the complaints?
    In times who prices are almost the same for the products, ppl tend to buy that product, that not only has the best features but also good support. When it comes to that MSI is not first choice.

  • Games Flickering with new bios update 351

    Games Flickering with new bios update TV277MH.351 basically when i flash my card with that bios i got in game flickering of 3D objects this is SErial number
    S/N:602-V277-250B1407011905 thank you in advance

    Quote from: misel.verk1 on 15-April-15, 19:02:26
    The one provided from above in the post by Flobelix
    The OC mode .

  • Requires new BIOS update

    Hi, I bought a new network card Intel® Dual Band Wireless-AC 7260 and I tried to install it into my HP DV6-6171TX however the BIOS state that it is not supported. I tried to look for BIOS update but the latest update they have online is in year 2011 version F.1B. Can I get new BIOS update to that I can get the network card to work?

    Symphofear wrote:
    Ok throught the manual which I went through, I bought an Intel Centrino Advanced-N 6230 which was also stated inside the manual however after I had changed to it and tried to bootup my laptop, the bios still have the same error. I am using the Intel processor, not the Amd one.
    You have to use a wireless card under the exact part number (BIOS will reject any other and you get the error). The part number for Intel 6230 belongs to a different Intel wireless card (unfortunate error from HP). I think it's Intel 1030. Dv6-6000 series is the last series with the whitelist still in it. There is an Intel 6230 listed under a part number: 636672-001. Perhaps it will work.
    edit: I have found Intel 6205 listed under 631954-001 but it's a pure wireless card, not a combo with bluetooth.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • W520 and new bios update

    I saw lenovo released the new bios update for the W520 and it says they updated the cpu microcode. Does that mean it will accept Ivy Bridge CPU's?
    Also what is your thought on W500 laptops in today's world? Are they worth hanging onto for anything or basically obsolete. I have 7 of them with the 1920x1200 resolution screen and 4 gb ram, would they be able to run the newer versions of autocad and catia?

    no the W520 doesn't accept Ivy Bridge CPU.
    The W500 run AutoCAD and Catia, but would be very slow if you have many parts. So if you are using the W500 for work, then you should consider upgrading.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • New BIOS Update for the Z61m Series

    Hi,
    I have a problem with the downloading of the new BIOS Update for above mentioned notebook. Lenovo provides the version 2.25, but only via BIOS utility (exe-File), although a link to bootable CD exists. Can anyone confirm this or can help me?
    Do anyone know a possibilty to contact lenovo/ibm in an easy way (not by contact form)? 
    Thanks in advance,
    AfterBurner 

    I have the same problem! Will try wit System Update!

  • Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its  related to overheating ?

    Just done a replacement of the pata DVD drive (its new and is working ok),  and a fresh clean  install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
    I believe its  related to overheating ?
    iStat Pro shows GPU diode temp at 66 C, CPU at 48 C,  Fan rpms is around 1000
    Any ideas somebody ?
    The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

    1.5-3 minute boot up as opposed to 15-20 seconds
    And
    why it takes a long time to load a lot of things.
    I have restored this
    from a time machine partition.
    TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
    What you need to do to regain your speed is to understand how your machine works
    Why is my computer slow?
    Fix any and all issues in software following this list of fixes
    ..Step by Step to fix your Mac
    Then follow this defrag method I've outlined
    How to safely defrag a Mac's hard drive
    Most commonly used backup methods
    There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
    Hope this assists.

Maybe you are looking for