New BIOS Update for the Z61m Series

Hi,
I have a problem with the downloading of the new BIOS Update for above mentioned notebook. Lenovo provides the version 2.25, but only via BIOS utility (exe-File), although a link to bootable CD exists. Can anyone confirm this or can help me?
Do anyone know a possibilty to contact lenovo/ibm in an easy way (not by contact form)?
Thanks in advance,
AfterBurner

I have the same problem! Will try wit System Update!

Similar Messages

Looking for a bios update for the Acer aspire M1641 Motherboard

Looking for a bios update for the Acer aspire M1641 Motherboard All I could find was one for the acer aspire M1640 Which has a different board number but is as close as i can get to it. Is this the right one? If not would anyone be able to point me in the right direction? Thanks.

@IronFly: The old website is always useful!

BIOS Update for the MSI GTX670 Power Edition Card

There is a Bios update for the MSI GTX670 PE video card but it's for a hybrid card. What is meant by a hybrid card and how do I know if this applies to my video card? Any help would be appreciated in advance. Thank you. I do know that I can't for some reason or another install the Msi Update program for this card. It keeps saying that you have to be the administrator and Iam the administrator on my system. I do not understand.

You can use windows version of it to flash it:
>>Download NVFLASH for windows<<
syntax from cmd:
nvflash -4 -5 -6 myrom.rom [ENTER]
where myrom.rom will be your vbios file

Need help Flashing to MSI's new Bios revsion for the MSI GT70 0NC

MSI just came out with a new bios revision for the MSI GT70 0NC I was wanting to know which bios revision is for my MSI notebook?

Hello again my friend, yes it's me again. Here's a screenshot from our last bios flash you helped me out with. Remember I have Windows 8 and still used the MSI flashing tool because I have the older MSI GT70 0NC So I was wanting to know which of the new ones I can obtain and download for my notebook again.

I just got the new iOS5 update for the iPhone 3GS and I cannot receive messages because it says that the SMS is full. I deleted all my texts, but still cannot receive texts. Is there something I can do???, I cannot receive texts with the new iOS5 update

Hi everyone, I just got the new iOS5 update for my iPhone 3GS. I receive a message saying that "Your SMS mailbox is full. New messages cannot be recieved until you delete some messages." I deleted all of my messages but still could not receive texts after restoring and restarting my phone. Can anything be done to remedy this??? Thanks!

Apple is screwing the pooch on this one. Need to call in and be vocal.

Will the NF750-G55 boards get a new bios update for phenom II X6 ?

I would like to know if MSI will release a new bios for G55-nf750 for phenom II X6
thank you in advance

Yes, there could be something important we and you should know. But please, begin a new thread of your own not to confuse the readers.
Tell the support department where you bought your things, that your system is unusable if BIOS is not updated. They should take care of it. - Best to get it right from the beginning. And! they, where you bought the stuff, may even be grateful that you make them aware of the possible issue.

Is there gonna be anymore Bios updates for the NE02 Plat?

There was quite a few bioses out for the NEO2 when it came out, however it seems to have stopped @ 1.4 Does anyone know if MSI plans to make some new updated ones for the NE02?

I think the offical version now is 1.5... might want to check into it.

New Bios update for S10e compatible with original S10?

I saw on S10lenovo that they said the fan problem is now fixed with the new bios, so it runs at a low speed all the time instead of going on and off(which is quite annoying). I was wondering if the bios update is compatible with the original S10? if not, then when will the original S10's bios update be available? Thanks!

If your not familiar with bios updates, be very careful. Make sure your 100% positive its the proper one and it works, flashing an incorrect bios will essentially cripple your system.

New bios update for n200

Has anyone installed this bios update?
And if so, is everything still working?
Moderator Note; Please correct your location in your profile as required by the forum rules; Location is important when offering advice, as sales, service, and product options may not be consistent country to country. (Also within Europe)
Message Edited by andyP on 06-22-2008 07:02 PM

I have the same problem! Will try wit System Update!

MOVED: I think a bios update for the dka790gx platinum is in order

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=130180.0

I can check these timings using AMD Overdrive 3.02 (AOD). Performance control lets you play with lots of features in memory timing that are not in the BIOS. I used it to tighten up on memory timings get memory benchmark >2900 consistently with AOD's benchmarking utility. I did this at stock settings.
And the problem is there is a bug in the bios. Least I think it is a bug. The only time you get EPP limits on the values you can choose in the memory timings configuration screen of the bios is if you set the memory multiplier to 2.66:1, with or without EPP enabled. Otherwise it puts JDAC 400(DRR2 800) limits on the values. I want to have the freedom to set my timings to EPP 533 limits(DDR2 1066) when I am using a memory multiplier less than 2.66:1, like 2:1 or 1.66:1, so I don't have to up the voltage to much to get a solid stability test. I can get a good stability test with the DRAM Voltage set to 2.2, and memory is cheap enough I just might see how long they last like that, but I really want this bug in the bios fixed. I am sure it is in all of the MSI boards that use ATI 790GX chips.
I have been trying to figure out is enabling EPP does anything except lock you into the EPP timings when you are at 2.66:1. With EPP set to enabled I should be able to set my timings to CL=5, tRTC=5, tRP=5, tRAS=12-18, tRC=25-31, tWTR=3-5, tWR=8. Having the freedom to set these to EPP limits at any memory multiplier is crucial to successful overclocking on the nb/ht reference clock. How can we get MSI to make this a part of the next bios update? Without this correction, I am limited to tRC=26, tWR=6, tWTR=3, these are the JDAC limits not the EPP limits. We should see EPP limits if it is enabled. Least that's what it says in the nearly not informative help side panel.

Waiting for a new software update for the N86 8MP

Yes for the big GPS dysfunction, for the improvement of photos in situation of weak brightness, for a better compression of photos, for the problem of battery indicator and so on...
But nowadays they speak only about N97 !
EverBeFree

Yup! I think we should buy whatever Nokia say's it's their flagship model!!! Errr wait! What a happened to N96 users?? But for me, GPS is working great! I get fix in seconds even within home!!!

New Bios Update for MSI P4N Diamond to support 9XX D series

Hi, i recently bought a P4N Diamond with a 830D cpu. I want to upgrade to a 940D but unfortunately the MOBO does not support it as yet ( i had a look in your mobo support status) so was just wondering when and if an update will come out to support it.
Thanks

Hmm so that means Possible Yes or definite no that it wont be supported.
Another problem im having with my setup is this it keeps shutting down randomly on its own.
with overclocking and without overclocking. i have gone up to 3.1 ghz 3.2 ghz 3.3 ghz and it shuts down on its own or sometimes it justs freezes
my setup is this
p4n diamond
intel 830d 3.0ghz
500w antec neo SLI PSU
OCZ dual channel ddr 2 2gb ram 4-4-4-12 timings
250 gb WD sata 2 KS series
XFX XXX edition 7900GT GFX
can anyone help??

Need a bios update for the MSI g45 gaming boot issue

When i first start my system, I noticed that the board doesn't boot up correctly even if we set the main boot to be the hard disk. The system boot in the EUFI section not the hard disk. I had to use boot override function to choose the hard disk then the system will boot normaly to the hard disk.

This is a user to user forum. For any UEFI/BIOS modifications, MSI Technical needs to be informed. There are no UEFI/BIOS engineers here;
https://forum-en.msi.com/index.php?topic=107326.0 >> How To Contact MSI <<
In the boot sub-section, disable the devices you don't want to boot in the BBS properties, then set the boot order to nothing but the HDD with the OS on it. If this doesn't resolve it, then the alternate workaround is exactly what you did with the Override.

When will there be a new software update for the 6...

I have a 6500 slide with version 4.84 software, whereas version 6.60 is available in the far east. When will this version be available for European models?
Thanks in advance.

12-Jul-2008 04:40 PM
lest wrote:
I have a 6500 slide with version 4.84 software, whereas version 6.60 is available in the far east. When will this version be available for European models?
I suspect it's more a question of branding than region. This page will probably explain things better: http://linux.sgms-centre.com/nokiafaq/branded-phones/
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Is there a voltage Mod (or bios hacked) for the KT4Ultra series?

Thx!

goto this link :
http://www.msi.com.tw/program/service/forum/index.php?threadid=15634&boardid=13&styleid=1

New BIOS Update for the Z61m Series

Similar Messages

Maybe you are looking for