NEW BLACKBERRY Z10 BATTERY WAS NOT FULLY CHARGED

Hiii Friends
I Have purchased the new Blackberry Z10 One month ago, But its battery was not charged by 100%, it only charged by 94% maxmimum and also drains faster, I have already Turn off Device many time, Remove battery and again start the device, But even though I have face the Problem, Battery was charged at 94% only.
Please Let me know what to do.
Kalpesh Sonje
Solved!
Go to Solution.

Before taking out the battery, do NOT turn off the device.
Try this: leave it connected to the OEM stock wall outlet charger.
With it connected and powered ON, remove the battery for minute and replace.
Check the percentage and drain over the next day, and do the SAME procedure again.
Remember, the charge percentage is not an exact science, but rather an estimate by the software of the charge, based on the current power, historical drain and charging, etc.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Battery will not fully charge.

    My battery will not fully charge anymore. Also, it seems that my phone has a hard time charging because sometimes the bolt will not show even when it is plugged in so it seems like something is loose. I am going to go to Verizon today to have them look into it. Does anyone have any ideas?

    Hey SophieLouiseBacon,
    Have you been able to try a different cable, it a different cable does the same thing then it is probably and issue with the port on the device.
    Let us know how you make out at the store.
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Blackberry Z10 phone was not turn on

    Im using BB Z10 os version 10.3.1 for 7 months, recent days it hangs a lot and it hanged later not turning on and red led has been blinking simultanously.
    Iam staying at Hyderabad, India & the authorized service centers are not available & contact phone nos also not valid.
    Please help me out.

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs. If it fails, please try again but increase the step 4 wait time to 2 hours, and perhaps as long as 4-5 hours.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My new Iphone's battery does not hold charge for long; do you have the same problem?

    Greetings, I had a new iphone 4S -  bought March 2013, died suddenly September 2013. Iphone replaced by a new one, which seemed to work fine. Suddenly, noticed three days ago that the battery does not hold, even for one day, even with very little use. Charged battery yesterday morning, as it was dead, used phone a few times during the day, still had half batery full at bed time; this morning there was no battery at all - had discharged completely overnight doing nothing. Has anyone had this problem?
    It means that I will have to travel a long way to the nearest store to have it looked at. Had already done this last September to replace a dead phone. One would have expected better quality and reliability from a Company like Apple.

    Sounds like the battery needs replacing.  Bring the phone to Apple for battery diagnostics.

  • My iPhone 4 battery will not fully charge after latest update.  What gives?

    I updated to the latest software and now my iPhone will not charge.

    After a full 8 hour charge it only shows about 40% charge.  This phone worked without incident before the last two firmware updates.  I use the same wall charger and Apple cord for my iPad and wife's phone (she has not updated her phone to iOs 6.0.1) and they all work great.  There must be something in the new update that kills battery life. By the way, I replaced my battery less than a month ago. 

  • IPhone 5 not fully charging

    Hi,
    iPhone 5 - recently noticed when plugged in overnight, it was not fully charging (maybe charging to 75-80% when I checked in morning).  Unplug and plug lightning connector back into phone, and leave it alone.  It will eventually charge all the way.  Anyone else seen this?

    Should also mention - let battery completely run down when I noticed this issue and then plugged it in to charge.  Still same behavior.

  • 1020 will not fully charge

    New 1020, first Nokia & Windows phone. Noticed it will not fully charge.
    A few days ago I noticed it was not fully chargered after being on the supplied charger over night, it would top out at 73%.  I plugged it into an older wall charger and got it to 100%.
    Today I noticed it was not fully charged and pluged it into a different charger that came with my wifes 1020 while I was driving (our car has a built in inverter).  Finally it said it was fully charged (looking at the Settings Screen) so I unpluged it... 10 minutes later it went right back to 73%. No calls were made and it was not used. 15 minutes later it was at 72%. I took screen shots of the settings screen.
    Any ideas?
    Thanks

    Ditto, I dont even have a 25% charge afer a full night. I went to the att carrier I bought it from an dhe saif to make sure you "arrow" out everytime you use the phone but even doing that hasn't helped.  The warranty dept is sending me anew phone. I've only had it 15 days

  • The fully charged battery symbol shows up (a plug instead of a lightning bolt) when it's actually not fully charged! It also stops charging!

    The fully charged battery symbol shows up (a plug instead of a lightning bolt) when it's actually not fully charged! It also stops charging! How do I fix this?

    Did you already try to set it up "as new device" How to back up your data and set up as a new device
    If this does not work, try again, this time without using the latest backup, in case it contains corrupt data, causing your problems.

  • I have an IPOD Classic 30GB.  I thought the battery was not recharging so I bought a new battery and had it installed.  The device will come on and has a message on the screen "Please wait.  Very low battery."

    I have an IPOD Classic 30GB.  It would not stay on but a few seconds so I thought the battery was not recharging and bought a new battery.  I charged the new battery overnight and when I turned it on I could see the apple for only a few seconds and it would go off.  I tried the trouble shooting suggestions and reset the device. The screen is frozen with the message "Please Wait.  Very low battery." I also thought it might be a problem with the display but since it is on now, I'm not sure what is going on with it.

    There are several types of iPods that are "30GB," 3rd gen ("dock connector"), 4th gen ("click wheel" or "photo"), and 5th gen ("video").  This documents shows the iPod models
    http://support.apple.com/kb/HT1353
    Which one is your iPod?  Do you use a Mac or Windows PC?  Do you have a power adapter?

  • Satellite A100- New or Old Battery is not charging

    Hi,
    I have a Satellite A100-543 (PSAARE).
    The original battery was not charging so I purchased a new one. Now the new one is not charging either. I then ordered a new charger before coming to this forum so Ill test that when it arrives but I think the problem will not be solved.
    With the new Battery the Icon says "10% Usable, connected, charging". The Icon, when the laptop is first switched on, shows the charge bar moving (charging) but after a few moments stops.
    With the old Battery the Icon says " connected, charging". It shows empty.
    In both cases the Battery Green LED is on.
    If I pull out the charger from the laptop the computer stops immediately.
    Trawling the forums I see one proposed solution is a BIOS upgrade. I have BIOS version 5.80
    See: http://www.laptoprepair101.com/laptop/2006/05/23/toshiba-satellite-a105-battery-charging-problem/comment-page-19/#comment-151154
    However I cannot find my model (as above) on Toshiba's list! It was purchased in France and is out of warranty.
    Again I am dubious than this will solve the problem.
    Others point to the motherboard. How can I know this? If it is does anybody have an idea of cost?
    I do hope that someone can help.
    Henry

    I'm not going to immediately help but I think I have the same problem on my A200 Equium model 1V0, running Vista.
    Existing battery has gone down to 5% power and of course I get warnings so I run on mains but I can run the laptop on the battery for a few minutes.
    The charging light comes on for about 9 seconds and then goes out. The charging status changes from "on mains power, charging 5%" to "on mains power, not charging".
    It's odd that I can flip the battery out while the mains is attached and when I re-insert it, there's a charging light and charging status is ok for 9 seconds. If I do this often enough I can boost the battery to 10% but then the charging light only flickers on for a moment and there's no further actual charging. I think the main board charging circuit can't handle any more than a small feedback charge.
    I bought a new battery - the laptop won't run on this without mains power (in fact the charging light now only appears for a moment and no charging at all takes place).
    I uninstalled and re-installed the power ACPI from device manager - no change.
    I turned off laptop, removed battery and mains power and held down the power button for 15 seconds - no change.
    I checked my mains adapter using a circuit tester - OK.
    Oh, and I updated the BIOS to the latest version 2.5 - no change.
    It looks like the main board charging circuit has a fault which is uneconomical to repair.
    Unless someone out there knows differently??
    Message was edited by: crickbits

  • How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

    How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

    clintonfrombirmingham is right, there is no way to exactly tell. But from personal experience, a new battery on a 2008 will last for about 2 1/2 hours with a higher screen brightness and doing something taxing to the battery (like gaming or running lots of 3D programs). But if you're just listening to music with the brightness all the way down, and no programs running, you could get up to 12 hours. So for average use, it should last you a whole business day (assuming you don't use it more than 30% 0f the time). Hope this kind of gives you more of an idea of what to expect:)

  • I have low battery on my ipad and it still works but it is not fully charging what can i do

    i have a low battery on my ipad it still works but it is not fully charged what can i do to fully charge it

    Clean the charging port.
    Charge using the supplied wall charger, not your computer.
    Try another charger and/or cable.
    If none of these work, you have a hardware problem.

  • Macbook pro not fully charging

    My macbook pro is less than one month old and it started not fully charging a few days ago. It was at 97% when the light turned green, and wouldn't go up any more. I always have my keyboard light off & the screen light very dim so don't tell me to lower it. I then decided to calibrate the battery and it charged 100% but I unplugged it for a little bit and it dropped to 99% and will not go up anymore. The charger light is green and it thinks it's fully charged. What is going on?!! this is new!

    Normal behaviour. See below.
    http://support.apple.com/kb/TS1909
    Stedman

  • Creative Zen Vision M not fully charging

    (Creative Zen Vision M not fully charging( Hi, I recently bought a refurbished ZVM that doesnt seem to charging properly. When I first got it, it hadnt been charged in quite some time so the battery was overdead. My PC couldnt detect it when I connected it via usb and it didnt even start charging at all. I then connected it to a wall charger and it finally started charging. The strange thing is it never fully charges. I've charged it twice now, both times for at least about 2 hours, and the battery doesnt go more than 50%. And when I connect it to my PC to transfer songs, instead of resuming its charge, my battery runs out. Is this a case of a faulty battery? I li've in Australia and I bought it from the USA. I would prefer not to go through the trouble of returning it if I could. Anything I should do like leaving it to charge for an even longer time? Also one more thing I should mention. When I remove the wall charger and plug it back in, it takes the ZVM sometime to detect it, about 30 minutes or so, and start charging again. Any help or suggestions would be greatly appreciated.

    I have the exact same problem. I just mailed mine in for repair today.

  • When i plug in my 5c overnight to charge, it did not fully charge

    my iPhone 5c has ios 8.1.2  the memory available is 7.8gb storage capacity is12.8gb.  when I plug in the charger to charge overnight, it does not fully charge.  my phone was at 40% power last night and I plugged in the charger and this morning it was at only 61% power.  When I plugged it in, the battery symbol did not turn green, nor did it make the beep sound.  What is wrong?

    Are you using a genuine Apple charger and cable? If not, I would suspect there's a problem with either the plug or cable. Also, make sure the outlet you're using is working properly. Did a breaker blow through the night?

Maybe you are looking for

  • How can I Use the iCloud Control Panel to pick a new folder

    I apparently moved or deleted my iCloud folder and keep getting this message Use the iCloud Control Panel to pick a new folder.  How do I do this?

  • Input options: Language & Keyboard Layout

    I've not found a complete answer to my problem. I live in Paris and London. I work in English and French. I write emails and texts in English and French. I do not want to switch between keyboard layouts (EN and FR) just to change the language. I dont

  • Batch processing from Bridge: including "Subfolders"

    I posted in the Camera Raw forum on this, but thought it would not hurt to re-post here. Context: Mac quad G5, 4G Ram, 4 internal drives, OS 10.4.11, Photoshop CS3 Extended 10.0.1, ACR 4.4, Bridge 2.1.1.9 Checking the "Include All Subfolders" box see

  • Z97 MPOWER MAX AC power connectors... are all required?

     I am building a system with an i7-4790K and the Z97 MPOWER MAX AC board.  I see that it has 4 different power connectors: 24-pin (manual calls it JPWR1) 8-pin (two 4s side-by-side JPWR2) 4-pin (JPWR3) 6-pin (JPWR4) As I understand it, JPWR4 (the 6-p

  • Universe Limitations

    Guys, I have universe based on BW cube. I want to limit one measure by Dimension. I have Measure [Measures].[GAS_VOL] in field Select. As I understand BO for limitations I need to fill field Where. So I fill field Where by [WLENTITY].[LEVEL01]="Hanti