New bought 2504 Controller not copatible with 1702 APs
Hi!
Just got a 2504 Controller with 1702 APs, which are not joining the controller by known reasons.
(Cisco Controller) >*spamApTask1: Dec 16 22:20:10.288: f0:7f:06:c0:55:80 ApModel: AIR-CAP1702I-E-K9
*spamApTask1: Dec 16 22:20:10.288: Unknown AP type. Using Controller Version!!!
*spamApTask1: Dec 16 22:20:10.289: f0:7f:06:c0:55:80 ApModel: AIR-CAP1702I-E-K9
*spamApTask1: Dec 16 22:20:10.289: Unknown AP type. Using Controller Version!!!
*spamApTask1: Dec 16 22:20:16.135: fc:5b:39:6e:26:9c ApModel: AIR-CAP1702I-E-K9
But now I have to buy a SmartNET Subscription to get the bug-free Software for my controller, because software problems are not covered in the warranty? Is there any other Solution?
New controller running on 7.6.130.0
Regards
Alfred
Well that is too bad. Maybe ask the company whom you bought the WLC or if you have a Cisco SE to provide you with the code. The only other option is to return it and order the WLC with v8.0, but you will be stuck on that not so good code. The 2504 w/5 AP license, you can find a SMB smartnet for cheap that can give you access to the image download. It's really up to you, but the v8.0 that is currently out is the first version and... well, do I have to say more. I won't use that version, and my customers whom have had to go with that version because of access point support is not too happy to say the least. When the newer version comes out, they will have to upgrade.
-Scott
Similar Messages
-
My new macbook air is not synching with my iPod classic anymore
any ideas on why my new macbook air is not synching with my iPod classic anymore? It used to just show up on iTunes but it's not there now
iTunes will only transfer music from the iPhone that were bought at Apple's iTunes store. You'll need to use a third party program such as Senuti to transfer music you got from other sources.
-
I actually need help but cannot find the answer.
Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
Thank you.
''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.
-
Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?
Clarification: this is a user forum; you are not addressing Adobe here.
The answer to your question as phrased is: never.
CS5 is history and it is not longer supported. There will not be any updates or bug fixes for CS5.
You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera.. -
I have a OS X 10.4.11 and my new iphone 4 will not sync with it. I get a message that says i need a 10.5 or higher. what can I do?
Hi
I have exactly the same problem.
My computer seems to match the Leopard 10.5 system requirements as follows:
Hardware Overview:
Machine Name: iMac G5
Machine Model: PowerMac8,2
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 1
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 600 MHz
Boot ROM Version: 5.2.5f1
Serial Number:
What do I do next to upgrade the system from OS X 10.4.11?
Thanks
Theresa -
My Mac operating system is OSX 10.4.11 and I "replaced" my older version of Firefox with a newer one that does not open with my system. Can you send me an older version of Firefox? Thanks!
You can get Firefox 3.6.20 from here. <br />
http://www.mozilla.com/en-US/firefox/all-older.html -
My new ipod nano will not synch with iTunes - help? ipod nano sw v1.0.2; iTunes sw v11.0.1; mac os x v10.7.4
UPDATE
i was able to connect and synced songs yesterday.
but when i tried it again today. i cant connect again.
i tried to disconnect and reconnect million times and i even dropped
my iPOD and now it has some scratch and i hate it. -
My new iphone 5 will not connect with the idrive on my new BMW F30 3 Series - any ideas?
My new iphone 5 will not connect with the idrive on my new BMW 3 Series (F30) via the lightening USB - does anyone have any ideas?
What have you done thus far to troubleshoot your issue? Have you powered down and rebooted your router yet?
-
My new iPhone 6 will not pair with BMW. Previous iPhones have always worked fine
my new iPhone 6 will not pair with BMW. Previous iPhones have always worked fine
Hi, thanks for the reply - it's on 8.1 already!
-
HT1414 My new iPad mini will not sync with my ITunes.
My new iPad mini will not sync with my iTunes
i cannot connect my new ipad mini to itunes to set it up. Itunes will not recognise the device ?
please help -
New Applications model DOES NOT work with StandAlone OSD media
If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
- The creation of the media will be successful
- The application installation itself will be successful
Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
causing the task sequence to error out..
Thanks,
Squirre1It is very similar to this description:
http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media. -
my new iphone 5c does not pair with Macpro while Macpro display pairing via blue tooth and also my new iphon 5c does search other smart phones while Macpro does so
The iPhone supports only a limited number of profiles and will only pair with a computer for internet sharing (tethering, hotspot if your cellular carrier plan supports that). http://support.apple.com/kb/HT3647
-
New ipod touch will not charge with car stereo anymore
I recently got an iPod Touch and when I plug it in to my car stereo it says that "charging is not supported with this accessory". I'm assuming it has something to do with the fact that the new IPT do not charge with firewire.
I'm having the same problem with a USB 2.0 extension cord I bought. this one I don't understand because it is supposed to be USB and not firewire. I've tried plugging that in to the wall with a usb wall charger but I get the same thing, so it's not an issue of there not being enough power.
As far as my car is concerned, the cable has a regular ipod connection. I look up firewire to USB converters but they all have a female firewire (small odd shaped holes) connection, so I couldn't plug my cable in to it. Does anyone have any idea on what I could do to fix this situation so that my ipod will charge while it is plugged in?You have identified a problem that has been around since the iPod touch came out (also effects the latest generation nanos). Go to your local big box store and by yourself a new charger that is compatible with the touch.
-
The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.
-
i have a blackberry and im not happy with it at all its gets hot and it burns ur hands and the scern is black and it turns off and dont want to down load i hate is phone and i just got in 3mon ago im now stuck with it
Hi and Welcome to the Community!
Given that it's only 3 months old and was brand new, you are covered by warranty. You need to take it to whoever you bought it from as they are the servicer of your warranty.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
System Image for G5 (PPC) and iMac (Intel Core 2 Duo)
hello, I would like to know if there is a way to create a common system image Mac OS X 10.4.10 that I can "deploy" in out two mac labs. One with G5 (PPC-based machines) and the other with iMac (Intel-based machines). If yes, how can I do that ? with
-
URGENT HELP: How to reformat an external hard drive?!
We purchased a Desk Hammer external hard drive with USB. My hubby plugged it into his Mac G4/OS 8.6 and when it was recognized, he selected to format it for Mac only. We needed it to be ISO Whatever so I can use it on my Windows systems too. The Desk
-
I'm trying to find a good way to get new lines in a file, and while this works it also uses 100% CPU and is driving me nuts. At least the profiler says this is .run is using the most, and taskmanager gives it 100%. The file name changes every day. pa
-
My IPad is not showing up on Find my IPhone. Does this mean we don't have it set up properly or it's not connected to Wifi? It was stolen last night. Trying to locate it
-
Where is my Photoshop Elements 11 serial number?
I purchased Elements 11 through Apple and downloaded it to my Mac. I now receive a message telling me my trail has expired and to enter my serial number which I don't seem to have. I have checked my account with Adobe and it is not listed in my purch