New BP grouping for existing BP role

Hi Media experts,
We have a requirement to add a new BP grouping for an existing role(Retailer- ISM001) which enable us to create a BP in the retailer role with a different number range. So we created new grouping and customer account group and assigned a new number range.The problem is that we created BP with the new number range but in change mode it shows only the general data.System not showing the company code and sales area datas.
Note: Integration is BP to Customer
Please give a solution
Thanks in advance,
Regards,
Srikanth.M

Thanks for your reply
As you mentioned we checked the configuration, but it is quite okay. We normally create BP with the same settings. You mean to say that we need to change the configuration under u2018Configure Field Attributes per activityu2019 for the new BP Grouping we created? Could you please explain little more about how BP Grouping (Newly created) links with the above mentioned customizing activity? Isnu2019t this customizing common in create, change display activity irrespective of BP Grouping?
with warm regards,
Srikanth.M

Similar Messages

New Excise Group for Existing Plant

Dear CIN Experts,
We have query, as there is Change in Excise Group for Existing Plant, Question here is weather it is possible from functional part what will be effect on historical data and from CIN [Excise transaction] perspective and how to cope up with new excise related transaction like;
1) Sales Excise Invoice
2) Register Updates
3) Utilization
Kindly expedite from CIN perspective about the pro and cons for the same.
Thanks in Advance,
Ashish

Hi
For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
Hope this solves your query
Thanks & Regards
Kishore

New valuvation group for existing valuation area - Account Determination

Hi Experts,
Existing Scenario :
-> Plant level valuvation is been maintained
-> Valuvation group code 0001 is assigned for all the Valuvation Area until now.
Req :
I need to set new account determination for a particular material type for the existing valuvation area.
How to achieve the same ?
1.Do I need to create a new valuvation groupcode and assign the same for the existing valuvation area ?
Your inputs will be helpful.
Regards
Prasath

Hi
For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
Hope this solves your query
Thanks & Regards
Kishore

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

Can we create new customer site for existing customers using custm interfc

Hi ,
I have a requirement :
version -- R12 .
We need to add new customer site for existing customers , is it possible to create it through customer interface with insert_update_flag set as U / I .
Any help in this is grate .
regards ,
Azzu .

I am pretty sure I've done this on one of my past project..
why don't you try it out?
Another route would be use customer APIs (TCA APIs)...which I am sure can achieve what you're looking for.
Edited by: James Kim on Mar 17, 2010 2:48 PM

Define new tolerance group for G/L accounts

Hi,
Where do define new tolerance group for G/L accounts?
Thank in advance.
Swetha

Hi Swatha,
Debit Account
Maximum Revenue Difference on Clearing
     Clearing differences in your favour are permitted up to the amount specified here. The amount always refers to the local currency. Differences up to amount specified are automatically posted by the system as increasing profits. To do this, the system creates new line items.
     In addition to the amount, enter a percentage rate in the Percentage field. The lower of the two limits applies. If you only want to use absolute amounts or percentage rates, you have to enter maximum value in other fields. Ensure that you define these limits for your G/L accounts and your employees. The lower of the two limits applies.
Credit Account
Maximum Expense Difference on Clearing
     Differences to your disadvantage are permitted up to the amount specified here. The amount always refers to the local currency. Differences up to amount are automatically posted by the system as reducing profits.
     In addition to the amount, enter a percentage rate in the field
     Percentage. The lower limit applies. If you only want to use absol amounts or percentage specifications, you have to enter maximum value in other fields. Ensure that you define these limits for your G/L account and your employees. The lower value applies.
May be this information is useful to you
Edited by: surya naveen on Jul 28, 2008 2:11 PM

Want to create new protection group for 2 members which are already under another protection group.

Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Service entry sheet error.with new material group for services

Dear Experts
We need to create material group for roll shop spare parts service,we created a new material group.
when we are creating PR/PO with item category as D and a/c assignment K( entered cost center here).its giving error message
as RC= 3M8 47 Account determination for entry JSL KBS J001 not possible(while making service entry sheet)
after that i changed PR/PO and gave cost center and G/l account.now the service entry sheet is accepted.
is it necessary give G/L account manually,if user chose wrong G/L account how to avoid this problem.
please clarify me,
do we need to assign valuation class for material group for services?(where to assign)
or
should assign G/L account manually to cost center while creating PR/PO
Please clarify me
Regards,
Varun
Edited by: madhu varun tirupati on Sep 8, 2010 2:48 PM

Hi,
Option-1:-- >
Without creating material group and you can use your other service material group(existing service material group) and create a service master in AC03 as spareservice. Create a Service PO with text as roll shop spare parts service with other details as required like quantity of service, cost center & G/L account etc. After service being completed you can do SES in t.code: ML81N
Option-2:-- >
If you want report at the end based on different material/service group level, you can create a material/service group in OMSF for roll shop spare parts service and then you can assign to valuation class to material group in OMQW t.code. Then carry out regular process service order, SES etc.
Based on requirement, you can enter G/L account manually or can set default G/L account in purchasing document with help of t.codes: OMSK, OMQW, OME9, OMGO & OBYC
For error u201CAccount determination for entry JSL KBS J001 not possibleu201D, you cannot assign KBS transaction/event key to an account in OBYC t.code. Only you can assign G/L account to cost center with your CompanyCode in OKB9 t.code. Check the SAP note: 364570 & 106981
Regards,
Biju K

Automatically assign a BP Grouping for a BP Role

Hi, everyone!
I would like to automatically assign an specific Grouping range for a BP when creating it in an specific Role. Now, the user has to select each them separately and sometimes makes mistakes because he selects a wrong Grouping for the Role he is selecting.
Can this be done? I will appreciate a lot your help.
Thanks in advance.
Adolfo Garay

Thank you very much, Javier! I will try to explore this. By any chance, do you have any example that could help me to do this?
Anyone else have some examples that can be useful for this case?
Regards,
Adolfo

Help needed to generate new target group for contacts from BP Target Group

In CRM 5.0, we have a functionality in which say we have created a target group (T1) for 10 BPu2019s (organization) and each of these BPu2019s have one or more contact persons associated to them. Now if I want to create a target group for all these contact persons associated to the 10 BPu2019s, in CRM 5.0 I have the option to right click on the target group (T1) and then I get an option u201C generate new target group from contactsu201D. By doing so another target group for all the contacts associated to those BPu2019s will be generated. I am not able to find out the similar option in CRM 2007 (web UI) where in I can create target group for contacts associated to BPu2019s (organization). There should be some work around for this requirement.
Please let me know how to achieve this requirement.
Thanks,
udaya

Hi udaya,
we're also using that functionality in CRM 5.0. I think it would be worth a combined OSS message to get this functionality back in standard if it isn't there.
Best regards
Gregor

Applying new license file for existing installation

Hi experts,
I have installed Sybase ASE 15.7 SP110 Developer Edition (DE) on a VM running RHEL 6.2 for x86_64. Now my company purchased a license for Enterprise Edition and my manager sent me a license file (*.lic). Now I'm wondering if I can apply this new license on my existing installation. If yes, could someone point me to the detailed steps to do that?

re: lmutil lmhostid ...
Make sure you've sourced the $SYBASE/SYBASE.sh script before running lmutil lmhostid; also make sure you've sourced this file before trying to start up your dataserver and backupserver.
re: license 'upgrade' ...
Making quite a few assumptions (eg, this is a unserved license; the manager entered the correct hostid when generating the license; the license is appropriate for your vm in terms of license type and number of licenses; the new license isn't a subcapacity license; etc, etc, etc) ...
If your dataserver is up and running you can use the sp_lmconfig stored proc to change your license information. In particular you're looking to reset the edition type (PE) and license type (LT) settings to match the settings in your new license.
If your dataseerver is down/not-running, you can make the same changes by updating the $SYBASE/ASE*/sysam/<DSQUERY>.properties file. Using an ascii text editor (eg, vi) you want to change the PE/LT values to match what's in your license. [I typically go ahead and remove all of the lines that look like hex code values.] [Obviously (?) make a copy of the <DSQUERY>.properties file before you edit it.]
Where it starts getting tricky is when my list of assumptions are incorrect, eg, manager generated a served licensed (so you may need to setup a license manager), manager used the wrong hostid (in which case the license will need to be turned in and regenerated with the correct info), you've got a subcapacity license (in which case you'll likely need to make some other changes to the <DSQUERY>.properties files ... assuming the correct subcap license tag/id was provided when the license was generated), etc, etc, etc. [And you may want to find a few chickens ... for sacrifices to the SYSAM gods ... just in case.]

New Consolidation Group with existing unit

Hi,
Below is the hierarcy structure of Consolidation Units where Unit A is topmost Parent Company.
CG01
-Unit A
-Unit B
-Unit C
-CG02
    -Unit X
    -Unit Y
We want to add one new group which should contain only Unit A & Unit B during the financial year say07/2008 and it should like like as follows:
CG01
-Unit C
   -CG09
    -Unit A
    -Unit B
   -CG02
     -Unit X
     -Unit Y
Following steps, I have taken:
1-Created New group in 07/2008
2-Assigend Unit A and B in CG09 in period 07/2008 as 07/2008 their first period of consolidation
3-In CG01, changed the master data for Unit A and Unit B to indicate last period of consolidation as 07/2008
I would need your help:
-Is this correct way of creating new group with the existing unit?
-Do I need to remove the Unit A & B from the old group CG01 and if yes then in which period?
-Any other suggestion in the context?
Thanks,
UR

Thanks Dan,
It works fine with the above suggestion. In period 07/2008 group change task post Divestiture entry in old group and acquisition entry in new group.
However, before arriving at the above solution, we tested with one unit by removing it from the old Group hierarchy in 07/2008. Now even after I put this back in the old hiearchy and make all the above changes (divestiture seeting in 07/2008 in old group and FC in 07/2008 in new group) the Group changes task in not posting any divestiture entries. At the same time, it is posting acquisition entry for this unit.
Can you please suggest some way out?
Best Regards,
UR

How to get the New created Hier for existing IO and IS in the Infopackage

hello Gurus,
I have created a new Custom hierarchy on an existing InfoObject 0Costcenter. There are many Hierarchies already existing and being fed from R3. This new hierarchy is just a regrouping of costcenters.
Now I have created this new Hier and activated it, When I tried to create a Infopackage to load this new Hier, I am not finding the new created Hierarchy in the Hierarchy Selection tab of Infopakage.What should I do to see this new HIer.
Thanks
Simmi

so, the costcenter hierarchy created by the user is not a std costcenter hierarchy, so it should be a set hierarchy. go to tcode BW07 in r/3, give the name of the table and field, if you like the name of the datasource too orelse the system woudl generate it. But the costcenter hierarchy is compounded to controlling area, you would need to write a user exit to populate the compounding object too in the datasource, orelse all the costcenters would be unassigned to controlling area. once created, you can check the same in rsa6. once you see it there, replicate the DS to BI, and after that the data flow is same. create a new infopack to load the set hierarchy, as you wont be able to see this hierarchy in the std costcenter hierarchies.
check a few other threads:
Tcodes BW10/BW07 - how to use these
compounding for hierarchies:
ZXRSAU04 - programming for compounding in hierarchy

OMJJ - add new account grouping for transaction type

Hi
How can I add anew combination of movement type and special stock indicator, that don't exist in our system.
How can I add a line to OMJJ account grouping table?
Is it dependant on something else?
Thanks
Liat

Hi Liat, if you want to create a new movement type, you go to transaction OMJJ, select movement type, put in field from movement type that you want to copy and in field to movement type that you want to create, you copy all entries and on Update control... tab you can put special stock indicator.
Please review this
I hope this information help you
Rose

Reinstalling SCSM with new Management Group and existing DB

Hello!
My customer has an issue. He installed SCSM MS and called Management Group with spaces. Because of that DW cannot use it Data source.
As I know I cannot change name of Management Group and have to reinstall SCSM from scratch. But I need to keep his existing ServiceManager Database.
Do I have an option to make a brand new MG, but keep an existing Database?
Thank you!

Hi Schubarov,
The management group is a difficult one because the database is based on the name of the management server and the management group name. These really have to remain the same to be able to use the SserviceManager database.
When installing the Management Server, the installation wizard should not allow you to enter spaces if they are not supported. Not sure how they managed to get the spaces in the Management Group name to start with. I'd be keen to know if the Wizard allows
spaces, but the DW registration does not.... That sounds like a terrible bug if it is true.
There are a few guides out there, but they are NOT supported by Microsoft and who knows what could happen.
Sorry that there is not a simple answer.
Brett
Brett Moffett

New BP grouping for existing BP role

Similar Messages

Maybe you are looking for