New BSP Application using BOL Entities!..

Hi All,
Is it possible to create a new (Custom) BSP application using standard BOL entities, used in ICWC?.
I have a requirement to create a BSP application which maintain service tickets (Transactions). If I can use the BOL entities it will be more convenient for the developement. When I tried to develope a sample application using standard BOL entitity(BTOrder, BTAdminH, etc), it failed!.
Anyone did similar developments ?. Please Help!.
Thanks, Sudeep..

Requirement ruled out

Similar Messages

CRM2007 Webclient--where to assign the new BSP application.

Hello All,
I am very new to CRM2007 so please guide me here.I have created a new BSP application ZCRM_IC with new views and controllers as per the customer requirement.But I am not sure how to make it available for the customer when they log into webclient through their Role.
I dont want the customer to access the regular CRM_IC but they need to access ZCRM_IC application.
I would award <removed>
thanks,
Kitcha.
Edited by: Arun Varadarajan on Apr 7, 2009 3:40 PM

Hi,
Could you please following the below documentation to change the hostname or the IP Address depending upon the type of install :-
Changing Network Configurations
Sections :-
Table 8-1 Supported Procedures for Hostname, Domain Name, and IP Address Changes
8.2.1 Understanding the chgiphost Command.
Regards,
Prakash.

Buling a new Web Application using JSF and Ajax.

Hello Group,
I am a building a new web application using JSF and AJAX. Planning to use Myfaces Tomahawk, Dojo for Ajax, Hibernate, Spring,Eclipse IDE and Jetty Server.Can some one please suggest me will this be a right one for
building complex UI and will it support for using the jsf features and would like to know any other free open
source framework, ide, tools which support the best way for an agile project..?. There is restriction like i have to use java1.4

jaisheela wrote:
Hello Friends,
I am also in the same situation.
I am a building a new web application using JSF and AJAX.
Requirement is I need to use IBM version of DOJO and JSF but I need to develop the whole application using Eclipse 3.3,2 and Tomcat 5.5.
With IBM version of DOJO and JSF, will Eclipse and Tomcat help to speed up the development or do you suggest me to go for Rational Application Developer and WebSphere Application Server.
If I need to go with RAD and WAS, then I am new to RAD and WAS, is it easy to use RAD and WAS for this kind of application and implement web applicaiton fast.
Any feedback will be great help.Those don't sound like requirements of the system to me. They sound more like someone wants to improve their CV/resume
From what I've read recently, if it's just fast you want, look at Ruby on Rails

Handling events in BSP application using WML tag Extensions

Hello Everyone ,
We are developing a BSP applications for Mobile handheld using WML tag library. I am looking for some code samples to know how we can handle evevents inside the BSP using the WML tag library.
Can any one of you plesae help us by placing a code snippet for handling onInputprocessing() methods (BSP Using WML Tag extensions).
I mean to ask how we can handle events inside the BSP applications that uses the WML tag library.
I know about how to handle BSP events using HTMLB and XHTMLB tags frameworks.
Thanks for your help in advance.
Thanks,
Greetson

Is this WML tag library something that is supplied by SAP u2013 as a BSP Extension Element? Or are you just using WML tags directly in your layout? I can tell you in general that if you want to generate HTMLB events from regular HTML code you can generate the JavaScript calls using the htmlbEvent tag of the BSP extension library. However your tags have to be running within an HTMLB Content tag for this to work.
If you want to work totally without HTMLB then you need to use the simple HTTP Post but format the input name as OnInputProcessing(<function code>) like this:
<input type="submit" name="OnInputProcessing(ok)" value="OK">
This will cause the OnInputProcessing event handler to trigger without needing any HTMLB tags (this is how it was done in WebAS 6.10 before we BSP Extensions).

How to create new bsp application ? complete guide

hi all,
i am new to bsp pls, anyone can explain or send material regarging bsp application . with one example.
its urgent
with regards
lokeshan.m

Check these links:
overview:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4fbe7b8e-0a01-0010-b69b-b7e717378f22
Full Demos:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d46b9b90-0201-0010-ef92-9964c1bc98e1

E-recuitment-BSP Applications used

Dear Experts,
I am trying to understand the use of BSP's in E-recruitement. I am looking for materials that details the BSP's used in E-recruitment and how they are applied in E-recuitment. Any input on this would be of much help to me.
Thanks and Regards,
Pavithra

Hello Pavithra,
E-Recruiting uses the BSP technology for user interface. For E-Recruiting 300 BSP was the only user interface, with E-Recruiting 600 SAP introduced WebDynpro for candidate as an option, while for recruiters, managers and admin pages stayed with BSP. With EhP 4 WebDynpro replaces BSP for all E-recruiting applications.
You will find all BSP applications relevant for E-Recruting in Package PAOC_RCF_UI.
For the general structure. The very most applications are grouped on startpages for the different roles in the recruiting process (ext. candidate, int. candidate, recrutier, decision maker, ...). To get the links of these standard startpages just run report RCF_GENERATE_URLS. You can then logon to the different startpages but be sure to generate a candiate for your user first, using report RCF_CREATE_USER.
To learn more about how the different applications are linked within the startpage check the startpage and perhaps the container sequence customizing. Keep in mind that in the IMG only the customer entries are fond. To see the sap standard delivery you will have to use SE11/SE16. E-Recruiting customizing is stored in T77RCF* tables, startpage customizing is T77RCF_SP and container sequence customizing is T77RCF_CS. If you do not get along with the table descriptions just check the technical info of the tables/views behind the IMG nodes, then look for an table named without the C at the end. also check table T77RCF_LOG_APPL.
I hope that helps for a start.
Kind Regards
Roman

Development of BSP application using BSP_WD_CMPWB in CRM 2007

Hi
I am to develop an BSP application in web client UI ( using BSP_WD_CMPWB transaction code)
in CRM 2007could any one suggest me the tutorial i need to go through for this?
Ajay

Hi Ajay,
this is the link that u can visit for BSP application
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/881e3aa03ddb0fe10000000a11402f/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/7a/b86041397211d5992200508b6b8b11/frameset.htm
If u want to enhance any component of the BSP application then these documents would be helpful
http://help.sap.com/saphelp_crm60/helpdata/en/df/92fd2caf844d8daf890224d9761cbd/content.htm
http://help.sap.com/saphelp_crm60/helpdata/en/51/dfdf460f464db1b483d9c2a1bcd488/content.htm
http://help.sap.com/saphelp_crm60/helpdata/en/31/33591017f24cb68ef6ebf2ff575c2d/content.htm
Regards
Mayank

Authenticate BSP application using LDAP

Hi,
Thanks to Durai Raja for his earlier inputs in setting up LDAP connector in SAP. We were able to connect to our LDAP from SAP ( We use Novell eDirectory 8.5).
I also wrote a small program as below and I am getting back results from LDAP. We want to build BSP application where users would enter LDAP User ID and password and we want to Authenticate BSP application based on this input. My questions are
1) Is it possible to Authenticate BSP application based on LDAP user ID and password.
2) IF so, what is the function module to use. I searched LDAP_* but did not find anything.
3) If we authenticate using LDAP user ID and password, do we have to provide SAP User id and password in SICF and allow all users to log in using same SAP user ID and password ?
Niranjan
data: dns_out type table of ldap_dnii,
      ldapinfo type ldap_dnii,
      attrs_io type table of ldap_atii.
call function 'LDAP_SIMPLEBIND'
exporting
    serverid = 'HQLDAP'.   " Logical Server ID set in LDAP tcode
if sy-subrc eq 0.
call function 'LDAP_SEARCH'
    exporting
      base     = 'o=xxxxxxxx' " Company's Base
      filter   = 'uid=xxxxxxxx' " Novell User ID or LDAP user ID
    tables
      dns_out = dns_out
      attrs_io = attrs_io.
if sy-subrc eq 0.
    loop at dns_out into ldapinfo.
    endloop.
endif.
endif.

Thanks Raja for your inputs. This is our requirement.
We have about 350 SAP Users and about 700 Novell Users (computers). We want to provide Employee Personnel Information like Vacation details, Savings/Insurance details in BSP application. But half of them cannot access because they don't have access to SAP. We cannot give access to all of them since we have only 400 licenses. So, we were thinking to Authenticate against Novell Used ID and password and show them their personnel details. We have a mapping between Novell Used ID and SAP HR Empl # and so we can easily get their information. So, we want users to authenticate using Novell Used ID and password (each Novell user ID is mapped as LDAP ID) and, if it is successful, show their personnel details.
How can we achieve this ?
Niranjan

Problems with BSP application using HTTPS in EP6.0

We developed a custom BSP which uses HTTPS protocol and HTMLB tags. The BSP page has a date field (htmlb inputfield of type date..which allows the user to pick a date). If I run this BSP in its own browser window, clicking on the date field will display a calendar. However, if I run this BSP as an iView in the portal (we use EP6.0) and click on the date, I see a Javascript error message (in the browser status area) that says "access is denied" and the calendar isn't displayed.
Also, this BSP is a stateful application with the portal integration flag checked. However the DSM terminator is not invoked when I close the iView.
If I change the BSP settings to use HTTP, I can run it as a portal iView without any such problems. Has anyone experienced this and/or know how to resolve it? Any feedback would be greatly appreciated? Thanks,
Pradeep

Hi Pradeep,
You replied that you have "I fixed the date dropdown issue by specifying the theme in iView definition", could you please let us know where to specify the theme because when i ty to create the BSP iView i never get the option for specifying the theme,your assistance would be highly appreciated,do we have any Note on this issue.
Regards,
Rohit Pathak

Loggin intp BSP applications using SAP Dialog user

Hi,
I used SAP - service type user to log into my BSP applications in the following way:
========================================
data: usr type bapialias,
pwd type bapipwd.
data: return type table of bapiret2,
wa_return type bapiret2,
bname type USUSERNAME.
usr = request->get_form_field( 'username' ).
pwd = request->get_form_field( 'password' ).
CALL FUNCTION 'SUSR_INTERNET_USERSWITCH'
EXPORTING
ALIAS = usr
PASSWORD = pwd
IMPORTING
BNAME_AFTER_SWITCH = bname
TABLES
RETURN = return.
loop at return into wa_return.
err_msg = wa_return-message.
endloop.
if bname is not initial.
navigation->goto_page( 'main.htm' ).
endif.
===========================================
From the above, i am able to log in successfully. INow i need to log in as SAP Dialog user. Is there any way where i can log into BSP where the sap users are dialog types..
Thx,
Rajesh

Hey Raja,
Thanks for ur timely suggestions.
Now its working fine.
I am closing this issue.

BSP application using classification data

Hi, I haven't found the answer anywhere yet, so here is my question:
I have to change a standard SAP 4.7 sales transaction VA01 using the configurator into its Web version, using BSPs.
If I try to make it as simple as possible, will it be easy to keep the standard interaction between the classification data in the web screens ? ("if charactéristic C1 = A, then char C2 = B...")
Thanks very much for any help !
Jean

Hi Dezso,
Sorry I wasn't totally clear...
In VA01, you can use sell a configurable product. In this case, you call up a configuration screen, which is basically a list of characteristics (from the classification system), and you assign values.
When you do that, you can have interaction between the characteristics values.
Now in my new project, the customer wants to do the sales on a web screen, which means using the BSPs to 'translate' VA01 to a web page.
And I was wondering if I could keep all the behavior from the SAPGUI screen (matchcode, authorization check, interaction between the characteristics...) on the web version.
I hope this is more clear ?
Regards
Jean

R/3 report to be displayed via BSP application

Hi,
Can anyone tell me how to develop a BSP application in SRM system which will diplay a report developed in R/3?
thanks.

hi !!
refer to link ->
http://www.sapdevelopment.co.uk/webapps/bsp/bsp_exereport.htm
i am giving the extract from same website below :
Please follow following steps - >
Creating a BSP which executes an ABAP report to retrieve data
Step 1 - Create ABAP report to retrieve data
Using SE80 create program ZBSP_GETDATA.
Step 2 - Create new BSP Application
Using SE80 create BSP Application (I.e. ZBSP_GRANTS).
Step 3 - Create new page (initial.htm)
Right click on BSP object name and select create->page (with flow logic).
Step 4 Populate Layout tab
Insert the following code into initial.htm layout section.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<html>
<head>
    <link rel="stylesheet" href="../../sap/public/bc/bsp/styles/sapbsp.css">
    <title> Intial page of BSP application </title>
</head>
<body class="bspBody1">
<h1><img src="sap_logo.gif"> Transaction Display(TSTC)</h1>
   <% submit ZBSP_GETDATA and return with p_bsp = 'X'.%>
   <% import it_tstc to it_tstc from memory id sy-uname.%>
   <table width="80%" cellspacing="0" cellpadding="0" border="0">
     <tr>
       <td><b>T Code </b></td>
       <td><b>Program</b></td>
     </tr>
     <% data wa_tsts2 like line of it_tstc.
     Loop at it_tstc into wa_tstc. %>
     <tr>
       <td><%=wa_tstc-tcode%></td>
       <td><%=wa_tstc-PGMNA%></td>
     </tr>
     <% Endloop. %>
   </table>
</body>
</html>
Step 5 Setup Type Definitions (TYPE declarations)
TYPES: BEGIN OF t_tstc,
TCODE type tstc-tcode,
PGMNA type tstc-pgmna,
END OF t_tstc.
types: tt_tstc type standard table of t_tstc.
Step 6 Setup Page Attributes (Data declarations)
it_tstc
wa_tstc
TT_TSTC
T_TSTC
Step 7 Activate and test
Save everything and press the activate button, if all is ok press the test button which should open up a browser window and
display your newly created BSP.
*-- the code for BSP porgrams is
*& Report ZBSP_GETDATA                                                *
*& Example of a simple data retrieval                                  *
*& Used to demonstrate executing a report via a BSP application and    *
*& using the data retrieved as the basis for the BSP app.              *
*& If report is executed via a BSP then data is extracted to memory    *
*& and then retrievd by the BSP....                                    *
REPORT zbsp_getdata                 .
TABLES:     tstc.
type-pools: slis.                                 "ALV Declarations
parameters: p_bsp(1) type c no-display.
*Data Declaration
TYPES: BEGIN OF t_tstc,
TCODE type tstc-tcode,
PGMNA type tstc-pgmna,
END OF t_tstc.
DATA: it_tstc TYPE STANDARD TABLE OF t_tstc INITIAL SIZE 0,
      wa_tstc TYPE t_tstc.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'TCODE'.
fieldcatalog-seltext_m   = 'Trans code'.
fieldcatalog-col_pos     = 0.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PGMNA'.
fieldcatalog-seltext_m   = 'Program'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
if p_bsp EQ 'X'. "If report run from BSP application
    export it_tstc to memory id sy-uname.
else.
    gd_repid = sy-repid.
    call function 'REUSE_ALV_GRID_DISPLAY'
         exporting
              i_callback_program      = gd_repid
              is_layout               = gd_layout
              it_fieldcat             = fieldcatalog[]
              i_save                  = 'X'
         tables
              t_outtab                = it_tstc
         exceptions
              program_error           = 1
              others                  = 2.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
data: r_tcode type range of tstc-tcode with header line.
r_tcode-sign   = 'I'.
r_tcode-option = 'CP'.
r_tcode-low    = 'SE*'.
append r_tcode.
select tcode pgmna
   up to 10 rows
    from tstc
    into table it_tstc
   where tcode in r_tcode.
endform.                    " DATA_RETRIEVAL
*-- Dont foget to give points if it helps ...

Enhancing standard BSP application by using WebDynpro components

Hi all,
We have standard BSP application delivered by SAP; we need to enhance the functionality and some new views to meet our requirement. We have planned to develop new things in WebDynpro ABAP and attach those to BSP.
Is it good practice to use WebDynpro component instead customizing BSP application?
If any body has fair knowledge on BSP and WDA, please let me know.
Regards,
Rajesh

hi
good
BSP->
It is a set of pages that represent a user interface (layout and page flow definition). The layout part of a page normally contains ABAP or JavaScript code which is inserted into the HTML structure. They can contain server-side scripting code in either JavaScript or ABAP. BSP applications use all the conventional ABAP technologies, such as Open SQL and internal tables, allowing developers to create Web pages quickly. This enables existing SAP logic, data structures, and interfaces to be directly used in Web applications.
http://www.thespot4sap.com/Articles/SAP_WAS_BSP_Apps.asp
WDA->
Web Dynpro for ABAP or Web Dynpro for ABAP (WD4A, WDA) is the SAP standard UI technology for developing Web applications in the ABAP environment. It consists of a runtime environment and a graphical development environment with special Web Dynpro tools that are integrated in the ABAP Workbench (SE80).
Web Dynpro offers the following advantages for application developers:
●      The use of declarative and graphical tools significantly reduces the implementation effort
●      Web Dynpro supports a structured design process
●      Strict separation between layout and business data
●      Reuse and better maintainability by using components
●      The layout and navigation is easily changed using the Web Dynpro tools
●      Stateful applications are supported that is, if the page is changed and the required data remains intact so that you can access it at any time throughout the entire application context.
Note that stateless applications are not possible.
●      Automatic data transport using data binding
●      Automatic input check
●      Automatic operation of the Web Dynpro application using the keyboard
●      User interface accessibility is supported
●      Full integration in the reliable ABAP development environment
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/content.htm
thanks
mrutyun^

Calling a custom BSP application in CRM2007 ICWC using transaction launche

Hi Experts,
I created a Z BSP application in se80 which is a statefull application.Now I created a direct link in ICWC for this Bsp application using transaction launcher.
Now my problem is that the session of this BSP remains active even if I click on some other link in the navigation bar.
I need a way to end the session as soon as we navigate to some other link on the navigation bar.
It would also be helpful if I just know the code for killing the session programatically.
Helpful Answers will be rewarded!!
Thanks,
Ashish.

Hi,
I am not sure, but according to my understanding u can use CL_BSP_SERVER_SIDE_COOKIE class in ur BSP application to get refrence of ur BSP page.
When u r in Web UI by the help of this class u can check whether u r in BSP related view or in other then view. If u r in other view then u can set runtime->keep_context = 0.
Take help from this link for the class related info.
http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
Regards
Gaurav

Why to use htmlb elements in bsp applications

Hi All,
I have a doubt that why to use htmlb elements for implementing user interface in bsp applications .Implementing bsp application using htmlb is difficult than html because we have handle event triggering in oninputprocessing but this is not required in html.Can anybody help me out in understanding the advantages of htmlb over html.
Thanks in Advance......

Dear Srilalitha
Re: Why htmlb is prefered to normal html code ?
Please go thorught this. This will surely help.
Regards
Vijay.M

New BSP Application using BOL Entities!..

Similar Messages

Maybe you are looking for