New Bt Homehub For Existing Customers

Hi I have been with Bt for 3 months now and nearly everyday i have to change channel on my hub to be able to connect my laptop and phone have to change between channels 1,7 & 10 when i leave on automatic it only stays on channl 1 even after xamount of refresh wont change.
I have just seen the Hub 3.0 is out would i be able to be sent one of these as a replacement as this will fix my issue i have already tried 2 other hubs so all 3 cant be broke i cant deal with having to plug my laptop in via cable to change channel and then i can use wireless.
Thanks In Advance

Hi Thanks for the replys im on my 3rd homehub and same issuse on on all 3 i was with sky before and never had an issue at all was thinking of leaving bt and going back to sky as i need wireless to be working but then someone said about hh3.
I have spoke on the phone to bt and they say they can only send me a hh2 so was hoping someone here could let me no how i can get hold of hh3 many thanks.

Similar Messages

  • Can we create new customer site for existing customers using custm interfc

    Hi ,
    I have a requirement :
    version -- R12 .
    We need to add new customer site for existing customers , is it possible to create it through customer interface with insert_update_flag set as U / I .
    Any help in this is grate .
    regards ,
    Azzu .

    I am pretty sure I've done this on one of my past project..
    why don't you try it out?
    Another route would be use customer APIs (TCA APIs)...which I am sure can achieve what you're looking for.
    Edited by: James Kim on Mar 17, 2010 2:48 PM

  • New Package options for existing customers

    Can existing customers ,who are out of contract, apply for the various offers on the main site? If not, is there somewhere where available offers are shown or are you forced to deal with the dreaded call centre? In my case, I want to down grade to Tv essentials from TV unlimited, keep unlimited broadband and anytime calls. I would be prepared to pay up front to get the cheaper line rental. It seems I should be able to get this for £28 per month via the main website.

    Hi homerhotspur,
    Word of warning.  Make sure you get your deal confirmed in writing or by email.  I did a deal with the options team.  My bill was correct for the first month so I threw my call log away.  The second bill was wrong and BT deied any knowledge of the agreed deal.  It tokk quite some time and effort to get things sorted.  I am just hoping and praying that my May bill is correct otherwise it will be a bigger pain still sorting that out as BT will owe me money.  Is there such a thing as a reverse Direct Debit ?
    Best regards,
    dfenceman

  • I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

    I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

    Hi Bev,
    Thanks for the the email - I understand now.
    I would just like to ask another question with regards to my new order for complete Creative Cloud which you suggested. I have now pre-paid for a full year but I’m not
    sure when I can start downloading the other APPS as they don’t seem to be updating on my current Creative Cloud account app display. It still shows my old configuration
    of products (i.e. Photoshop etc) and my ‘activity stream’ relates back to 9 days ago.
    Please let me know how to get my new order activated.
    Thanks
    Kevin Bartley
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

  • MySite – My Content Page is not working and giving error for existing customers

    We are using SharePoint 2010 and recently moved to SharePoint 2013. Central Admin run under SP 2013 and Content Db Front End run under SP 2010.
    After migration the MySite – My Content Page is not working and giving error for existing customers (http://mysite.ss.com/_layouts/MySite.aspx?Error=4705).
    New users (after migration) are able access the My Content and adding documents but old users can’t.
    Can anyone help me on the above?

    I think you might be using non claims web app in 2010, if that is the case, you 'd need to convert your existing users to claims users for which you can refer to http://technet.microsoft.com/en-us/library/gg251985(v=office.15).aspx
    to check if your exisiting users are claims or classic users , try 
    get-spuser -web http://mysite.ss.com -limit all
    check in the output if you see the claims GUID in form of user names like i:0#.w|domain\username, if yes, they claims users if you just see Domain\username, you want those users to be converted to calims.
    i'd need more details to be specific about my answer but aforementioned scenario is most common of all, hope this helps, 
    Thanks, Noddy

  • How to add a new data element for existing table filed(Primary key field)

    Hi Experts,
    How to add a new data element for existing table field(Primary key field)
    For this filed ther is no foreign key relation ships and even check table.
    while activating table it is giving message like below.
    can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
    Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)           
    Primary key change not permitted for value table /TC/VENDOR
    Check on table  /TC/VENDOR resulted in errors              
    Thanks
    Ravi

    Hi,
    Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
    You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
    Maybe there are other ways, but this works.
    Success,
    Rob

  • Bundles for existing customers

    I have U-verse tv u300,high speed internet max plus,  U-verse voice. All of my promotional discounts end on 8/9/15. Are there any affordable bundles for existing customers? I don't need movie channels. I currently have 3 receivers, but could get by with 2. To get comparable pricing, will I need to change carriers?

    If you're getting charged for that third receiver and want to save some money, call customer support to return it - when you do, they'll probably start offering you all sorts of "deals", that'll be your chance to get another promotion. Others like to play angry with the retention dept threatening to leave for a deal - try asking nicely first so you don't have to get all worked up.

  • No New DVRs for Existing Customers

    From my recent chat with @VerizonSupport on Twitter:
    Hellstorm (me): @VerizonSupport Any chance of getting a DVR upgrade? I heard FIOS is coming out with new DVRs with more storage, new firmware, etc.
    Verizon Support: @Hellstorm Hi Brian. Currently, there are no plans to upgrade existing customers. ShawnG
    Hellstorm: @VerizonSupport So I can't bring my current DVR to a FIOS location & get a new one?
    Hellstorm: @VerizonSupport Why aren't customers supporting FIOS for years entitled to the same DVR as new customers?
    Verizon Support: @Hellstorm Unfortunately no.

    Bobbo527 wrote:
    Verizon is quickly becoming Comcast. They are making the SAME mistakes Comcast did, taking it's current customer base for granted (and treating them like dog excrement). It's this attitiude that Verizon is developing that drove me away from Comcast to begin with. I re-upped last year so I am trapped for another year, but after that if things continue this way I will be an ex-Verizon customer in 2012.
    Name one company that doesnt. Every company out there does the same thing. Once they get a customer they forget about them. All specials and new equipment are reserved for "new customers only". Been that way for decades and its not going to change anytime soon. You switch because you are offered a good deal. have it until the contract ends, then have to move to another company to get the "new customer deal" or live with what you have. Most live with what they have because it is too much trouble to go through all the switching.
    Or call, try and cancel, then in an effort to keep you they may try and offer you the new customer deal. But you have to be willing to through with the threat and actually cancel.
    I did this once with Direct TV about 12 years ago. I told them I would cancel unless they gave me a DVR for free (back when they were charging $500 for a DVR). They were giving them to new customers but told me I didnt qualify. They told me no, thinking I was bluffing. I canceled on the spot. I didnt have service for 3 days, then they called me back and offered me anything I wanted to come back. I got my DVR, a huge discount, and a contract to keep the discount for twice the length of time they were giving it to new customers. But you have to be willing to actually cut off service, and take the chance that they will not offer it to you to make this work.
    ====================================================================================
    Error exists between keyboard and chair.

  • FSCM-COL Business Partner Creation for Existing Customers

    Experts-
    After using MDS_LOAD_COCKPIT to create the initial load of Business Partners, there are a few Customers which are still missing Business Partners. Automatic Creation of Business Partners is set up and fully functioning for any new Customers created, however when attempting to use MDS_LOAD_COCKPIT for the existing Customers which are missing Business Partners the error message 'No transfer of interval for object BU_PARTNER' (Message no. NR028) is received.
    If the Automatic Creation of Business Partners is working correctly at the time of Customer Master creation, what would prevent the Business Partner from being created after the Customer already exists?
    Please let me know if further clarification is needed on what is outlined above.
    Thanks and Regards,
    Corey

    In case someone runs into a similar issue in the future, the resolution to this issue is provided below:
    In the case I've highlighted the customer had been created, yet the Business Partner failed to be created in the Automatic Business Partner Creation functionality initially due to a missed Tax Number Category configuration. Once this configuration was complete the BP still failed to create via XD02 or MDS_LOAD_COCKPIT. MDS_PPO2 gave the initial error message as 'Business partner ##1 does not exist' (Message no. R1201).
    Although the Customer to BP synchronization setting were set up for an external number range, the presence of contact persons in the Customer Master record were causing SAP to look for grouping data. Since no grouping data was present SAP was attempting to create BPs contact persons using the internal number range, which was already set at its limit.
    By removing the contact persons from the customer master via XD02 and then re-executing the MDS_LOAD_COCKPIT, the requested Business Partner was created. After that the contact persons were then re-maintained in the customer master.

  • Verizon process for iphones for existing customers......are you kidding me?????????

    Are you kidding me Verizon???
    I did everything you told me in order to get my iphone right away.  I got up at 3 am on the 6th and your website was down more than it was up...by the time I was able to place my order you tell me you are no longer accepting pre-orders.  Try again on the 9th.
    I stop in a store and they tell me they won't get any in the stores, I have to order on line or I will not be able to get my phone.
    I get up on the 9th @ 3 am and place my order and they tell me I won't get the phone until the 18th.  I am in bed watching the news and they show a lady walking out of a store front with a new iphone.  Are you kidding me??? Was she an existing customer or not.  Who knows or cares.  I don't get mine until after the 18th.
    So I go to a store front this morning and they have them in stock so I get my phone?  No because Verizon shipped the phone to me at 5 am this morning and they can't cancel the order.  They shipped it next day air with UPS but they didn't note for Saturday delivery so I won't get it until Monday....but there is another twist...the weather is bad and may delay the shipment...UPS can't tell me one way or the other so I may or may not get my phone on Monday and I have to stay home all day because they asked for a signature upon delivery.
    Are you kidding me???  How is this customer service.  Verizon you asked for an email so you could anticipate how many iphones to order.  If you didn't get enough to service existing customers in a timely manner why didn't you tell us?  If you have the phones in the stores why didn't you send me an email saying that I could pick up my phone in the store and save you the cost of an expedited delivery from UPS?
    So here I sit without an iphone. I've been a Verizon customer since they began.  I didn't switch to ATT when the iphone first came out.  I waited until they announced that they were coming to Verizon.  I did everything you asked me to and I still don't have my phone and am being put out to take off work on Monday or not get my phone until ???????????
    If I ran my business this way I wouldn't have a business!
    **bleep** in Columbus!   Are you kidding me????

    Same thing happened to me.  Very frustrating.  My son and I were told four different things by four different reps and also from in store reps. We missed the pre-order, but my son went on-line at 3 AM on the 9th and ordered it.  Our I-phone was supposed to ship on the 18th so we cancelled the order and picked one up at the store yesterday 10 minutes after a rep told me I could cancel as long as it wasn't shipped out yet. Earlier another rep had told my son earlier we could bring the order number into the store and pick it up while another told him no you can't do that. After picking up the phone in store, I go online to cancel and can't find it anywhere.  I call and that rep tells me its just waiting for a tracking number to ship.  So within a half hour I have a second I-phone coming.  I called this morning and the order is now canceled, but I still have to deal with returning the other.  Had they told me it would ship today, I would have waited because my son didn't need it that bad, but what a frustrating experience.  Shame on you Verizon. 

  • YouView box for existing customers

    • What options do existing customers (BT Infinity) have to upgrade to a YouView service/box?  I don't want to be stung on 'Activation' fees.
    It appears to be the 'Essential' package (£5 a month).
    • I don't really want to buy the player, and I don't want to pay a £35 activation fee.  I believe the YV box comes for free as part of the package.  If the fee is £5 a month - that's a pretty cost-effective way to buy it (it's around £180 new for the T1000*)
    Some other questions:
    • I presume BT are supplying the Humax DTR-T1000 (500GB model) box, rather than the silver T1010.  I think the T1010 is the same player but just with a silver case.
    • Do BT (eg the firmware on the player) 'lock down' the Humax in any way?  For instance, would the T1000 box you buy on its own be 'freer' than the one BT provide?   Would the firmware updates via BT be slower than the ones you'd get if you bought the box on it's own (ie not via BT, from Amazon)?
    Thanks for any replies - much appreciated.
    *does this turn into liquid metal and run after Linda Hamilton?

    1. Pay fee
    2. Pay up for service you want
    3. Yes it us the 500 GB box
    4. Yes updates come after those to retail boxes.
    BT are supplyng a service if you want it, really you have to pay for it and enjoy it.
    If you don't want to pay for the BT service then you have to buy a YouView box for yourself.
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • New BP grouping for existing BP role

    Hi Media experts,
    We have a requirement to add a new BP grouping for an existing role(Retailer- ISM001) which enable us to create a BP in the retailer role with a different number range. So we created new grouping and customer account group and assigned a new number range.The problem is that we created BP with the new number range but in change mode it shows only the general data.System not showing the company code and sales area datas.
    Note: Integration is BP to Customer
    Please give a solution
    Thanks in advance,
    Regards,
    Srikanth.M

    Thanks for your reply
    As you mentioned we checked the configuration, but it is quite okay. We normally create BP with the same settings. You mean to say that we need to change the configuration under u2018Configure Field Attributes per activityu2019 for the new BP Grouping we created? Could you please explain little more about how BP Grouping (Newly created) links with the above mentioned customizing activity? Isnu2019t this customizing common in create, change display activity irrespective of BP Grouping?
    with warm regards,
    Srikanth.M

  • New valuvation group for existing valuation area - Account Determination

    Hi Experts,
    Existing Scenario :
    -> Plant level valuvation is been maintained
    -> Valuvation group code 0001 is assigned for all the Valuvation Area until now.
    Req :
    I need to set new account determination for a particular material type for the existing valuvation area.
    How to achieve the same ?
    1.Do I need to create a new valuvation groupcode and assign the same for the existing valuvation  area ?
    Your inputs will be helpful.
    Regards
    Prasath

    Hi
    For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
    You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
    YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
    Hope this solves your query
    Thanks & Regards
    Kishore

  • New Excise Group for Existing Plant

    Dear CIN Experts,
    We have query, as there is Change in Excise Group for Existing Plant, Question here is weather it is possible from functional part what will be effect on historical data and from CIN [Excise transaction] perspective and how to cope up with new excise related transaction like;
    1) Sales Excise Invoice
    2) Register Updates
    3) Utilization
    Kindly expedite from CIN perspective about the pro and cons for the same.
    Thanks in Advance,
    Ashish

    Hi
    For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
    You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
    YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
    Hope this solves your query
    Thanks & Regards
    Kishore

  • Applying new license file for existing installation

    Hi experts,
    I have installed Sybase ASE 15.7 SP110 Developer Edition (DE) on a VM running RHEL 6.2 for x86_64. Now my company purchased a license for Enterprise Edition and my manager sent me a license file (*.lic). Now I'm wondering if I can apply this new license on my existing installation. If yes, could someone point me to the detailed steps to do that?

    re: lmutil lmhostid ...
    Make sure you've sourced the $SYBASE/SYBASE.sh script before running lmutil lmhostid; also make sure you've sourced this file before trying to start up your dataserver and backupserver.
    re: license 'upgrade' ...
    Making quite a few assumptions (eg, this is a unserved license; the manager entered the correct hostid when generating the license; the license is appropriate for your vm in terms of license type and number of licenses; the new license isn't a subcapacity license; etc, etc, etc) ...
    If your dataserver is up and running you can use the sp_lmconfig stored proc to change your license information.  In particular you're looking to reset the edition type (PE) and license type (LT) settings to match the settings in your new license.
    If your dataseerver is down/not-running, you can make the same changes by updating the $SYBASE/ASE*/sysam/<DSQUERY>.properties file. Using an ascii text editor (eg, vi) you want to change the PE/LT values to match what's in your license. [I typically go ahead and remove all of the lines that look like hex code values.] [Obviously (?) make a copy of the <DSQUERY>.properties file before you edit it.]
    Where it starts getting tricky is when my list of assumptions are incorrect, eg, manager generated a served licensed (so you may need to setup a license manager), manager used the wrong hostid (in which case the license will need to be turned in and regenerated with the correct info), you've got a subcapacity license (in which case you'll likely need to make some other changes to the <DSQUERY>.properties files ... assuming the correct subcap license tag/id was provided when the license was generated), etc, etc, etc. [And you may want to find a few chickens ... for sacrifices to the SYSAM gods ... just in case.]

Maybe you are looking for