New bug to report

I was trying to remove our "Library Interiors Test" site and
I was unable to remove this from the admin panel. The tab to REMOVE
the site was consistently greyed out. This needs to be addressed. I
believe the bug is triggered when you don't have any ICE files
inside of the directory that was assigned.

Hello Nathan,
You can only remove a site if you are the Administrator, the
only user, and there are no pending invitations for the site. You
must delete other users and pending invitations before Remove
Website will be available.
Please let me know if this is the case.
Best regards,
Corey

Similar Messages

(To Adam Winner) New bug report at data_table tag

Hi Adam
Here is a new bug in data_table
When you create an table with data_table using id=�tableName� attribute and render the data_table for the first time, JSF saves the settings, but does not change them any more when you add new Attributes.
When you add new Attributes to the data_table, they don�t get rendered. You must first change the id=�newTableName� before the changes gets rendered. Probably the tableID object is not changing its properties for some reason??
Regards:
Nermin B.

Hi Adam,
Sorry for misspelling your name. I realized this after I posted the message.
We're discussing the topic of your second message - how often the model of a UIData should be retrieved - on the EG. I hope 1.0 will have a solution.
I assume you're saving the state on the server?Yes You are right. I am saving state on the server. Do you think this could be the reason for this??
But I don't follow your first message - when you wrote about "adding Attributes" to the table, what specifically were you adding, and what changes were you expecting to see?
Are these changes in your model (the object used for "value"), or something else?What I am saying is following:
Let say you create an data_table tag:
<h:data_table rowClasses="table-row-even,table-row-odd"
styleClass="table-standard"
id="msgTable"
value="#{systemMessage.activeSystemMessages}"
var="msg">
You render this. The data is displayed etc. Works just perfect.
But now you decide to add some additional attributes to your data_table let say some columnClasses
If you simply add columnClasses in the data_table above, and reload the page (without restarting server) it won�t render the new attribute (columnClasses)!!
<h:data_table rowClasses="table-row-even,table-row-odd"
columnClasses="table-column-standard,table-column-standard�
styleClass="table-standard"
id="msgTable"
value="#{systemMessage.activeSystemMessages}"
var="msg">
You must change id attribute at the data_table first before the JSF takes changes over. The code will look like this:
<h:data_table rowClasses="table-row-even,table-row-odd"
columnClasses="table-column-standard,table-column-standard�
styleClass="table-standard"
id="msgTableNEW"
value="#{systemMessage.activeSystemMessages}"
var="msg">
(See id=� msgTableNEW�)
In this case JSF will take the new columnClasses attribute and render correctly.
Regards:
Nermin B.

How much money i will get, if i tell you a new bug in Firefox 8

how much money i will get, if i tell you a new bug in Firefox 8, i found a new bug in Firefox 8, i tested this bug on chrome but their is no issue with this .

About the only way you could get money is by reporting a serious or critical security vulnerability that has not been reported before.
http://www.mozilla.org/security/bug-bounty.html
http://www.mozilla.org/security/bug-bounty-faq.html

Components disarray New bug found?

I created a dashboard using among other, sliders and progress bars (Engage 2008). I exported the dashboard to power point and everything went OK. I decided to go back to the Xcelsius file, and to my astonishment, the sliders' width was now one fifth the original and the width of the progress bars was about five time wider !!
The power point file was not affected
I fixed both components widths, exported them again, went back to the original CX file....and again the same disarray!! I did this four times and the problem appeared always. Can someone tell me why is this happening?
Or is it a new bug?
Thanks!

It seems very easy to mess something up on the canvas in xcelsius. Locking all the components until you need to edit one ensures you don't accidentally mess one up. Well I need to, anyway...
Also, since I started getting weird effects like losing references, components reverting to their original size when I had edited them days ago etc, I thought it was better to lock components before saving. It seems to have reduced the incidence of such behavious but I could be imagining it: I still have unexpected and quite damaging behaviour as reported elsewhere on this forum.

CF8 cfdocument tag has a few new bugs

This discusses two new bugs in CF8 having to do with footers
in cfdocument.
***FIRST BUG***
With CFMX7, I could define a new footer by putting a new
<cfdocumentitem type="footer"> tag in each cfdocumentsection
of my pdf report. Each could have a different string, e.g., so that
the footer could tell the reader which chapter she is reading. This
does not work in CF8. The chapter name that appears on all pages is
the one defined in the last <cfdocumentitem type="footer">
tag in the cfdocument. Now only the page number changes
dynamically. Sample code:
<cfdocument format="pdf" unit="in" pagetype="letter"
marginbottom="0.8" marginleft="1" marginright="1"
margintop="0.8"
orientation="portrait" fontembed="yes" overwrite="yes"
filename="pdfbugdemo2.pdf" pageheight="11" pagewidth="8.5"
scale="100">
<cfdocumentsection>
<cfset footerContent="1. Introduction">
<cfdocumentitem type="footer">
<div style="float: left;">
<cfoutput>#footerContent#</cfoutput>
</div>
<div style="float: right;">
<cfoutput>#cfdocument.currentpagenumber#</cfoutput>
</div>
</cfdocumentitem>
<h1>Introduction</h1>
</cfdocumentsection>
<cfdocumentsection>
<cfset footerContent="2. Body of Document">
<cfdocumentitem type="footer">
<div style="float: left;">
<cfoutput>#footerContent#</cfoutput>
</div>
<div style="float: right;">
<cfoutput>#cfdocument.currentpagenumber#</cfoutput>
</div>
</cfdocumentitem>
<h1>Body of Document</h1>
</cfdocumentsection>
</cfdocument>
*** SECOND BUG ***
In CF8, you cannot cfinclude the same template multiple times
in a given template - you get an error (at least sometimes). A
workaround is to make multiple copies of the template, each with a
different name. This was not necessary in CFMX7. Sample code:
<cfdocument format="pdf" unit="in" pagetype="letter"
marginbottom="0.8" marginleft="1" marginright="1"
margintop="0.8"
orientation="portrait" fontembed="yes" overwrite="yes"
filename="pdfbugdemo2.pdf" pageheight="11" pagewidth="8.5"
scale="100">
<cfdocumentsection>
<cfset footerContent="1. Introduction">
<cfinclude template="pdfbugfooter.cfm">
<h1>Introduction</h1>
</cfdocumentsection>
<cfdocumentsection>
<cfset footerContent="2. Body of Document">
<cfinclude template="pdfbugfooter.cfm">
<h1>Body of Document</h1>
</cfdocumentsection>
</cfdocument>
where pdfbugfooter.cfm is:
<cfdocumentitem type="footer">
<div style="float: left;">
<cfoutput>#footerContent#</cfoutput>
</div>
<div style="float: right;">
<cfoutput>#cfdocument.currentpagenumber#</cfoutput>
</div>
</cfdocumentitem>

re: If you claim didn't say that,
No "if" about it - I made no such claim and never would -
thats just you
talking gibberish. Who in their right mind would say, or even
suggest, that
forums are not helpful. The only reason a forum exists in the
first place is
to be helpful!
re: So what was your actual intention in the first place?
Not sure you would undertsand, you seem to struggle to follow
along. But
just a hint for you - the forum posts, or quantity thereof,
have been used
by several people here, and by editors at sites such as
sitepoint.com, as a
metric to use to gague interest and activity. A metric only
useful when
taken in context with other pointers (job market, book
market, number of
classes still running, so on and so forth)
Again, nobody has ever said forums are not useful or helpful
- I suspect you
knew that much but felt the need to throw some nonsense about
in an attempt
at an argument - failed didn't it?
RE: Maybe they realized Ben Forta writes such a good books,
they felt
ashamed? :-)
The O'Reilly audience is typically seasoned developers, hard
core coders.
Their books are a tough read for beginners and O'Reilly
delibertately do not
cater to this audeince with many of their titles. And to put
it bluntly, the
main bunch of people to ditch CF early on were these "hard
core" types. I
belive this as the only CF developers I know are actually
more "designers"
than developers - I know of no professional coder/developers
that would
touch CF. Thats just my personal observation, btw.
re: From what I read, people are telling I'm right.
Are you crazy? They are all, at least 95%, in agreemenst that
Tim Buntel
needs to pick up the marketing act before CF dies. Seriously,
you do seem to
struggle to follow along at times - suggest you actually
read.
re: CF has always been "dead" in many places.
How can you always be dead, doesn't make sense! You have to
have lived in
order to die. There used to be hundreds of cf jobs advertised
here in
Australia every day, literally every day. Now you may see 3
or 4 each week -
mostly for migrating old cf sites to new asp.net or java
sites. And there is
no longer any CF classes advetised or held in nearly all
states - they
literally shut them down. I'm confident enough that the
comment "CF is dead"
is accurate.
r: Maybe you should be answering those questions, since you
seem to know
they're true, and I haven't heard of any such things.
I know the answers to all of those questions - becuase CF is
dying. If CF
were living, then none of those questions would have been
asked.
re: So you know they're not investing in one?
Yes, I know that. They will never spend that kind fo money on
coldfusion -
it just wouldn't be vaible for them. We're darned lucky that
still have
small team of enginners to write tags around the java
libraries and release
new versions. They are not actually going to start
"innovating" with CF in a
market like this - and I don't blame them.
"Fernis" <[email protected]> wrote in
message
news:[email protected]...
> >I never said you can't get help on the forums. Where
did you get that
> >from?
>
> If you claim didn't say that, and if you didn't even
mean that by saying
> "Forum averages about 3 new posts a day and has very
small community -
> very
> quiet.", why did you say such thing in the first place,
if it's totally
> irrelevant to all about getting help in the forums? So
what was your
> actual
> intention in the first place? Are you not reading what
other people are
> saying
> before responding? The rest of my post is really useless
compared to the
> finding that you just really do the trolling because you
like nit-picking.
> Unbelievable.
>
> >Why did O'Reilly pull their once popular CF book
from print and refuse to
> write any further CF books?
>
> Maybe they realized Ben Forta writes such a good books,
they felt ashamed?
> :-)
> I mean, if they were popular as you said.
>
> >No, its not not. Go here -
>
http://techfeed.net/blog/index.cfm/2007/8/22/Open-Letter-to-Tim-Buntel
> >- and see actual people tell you how wrong you are.
>
> From what I read, people are telling I'm right. So what
*you* say is
> downright
> silly.
>
> >But you seemed to be thing that I based my whole
argument that CF is weak
> >and
> dying
> >( is already dead in many places)
>
> CF has always been "dead" in many places. And it's been
dying for 10
> years -
> they say. So what's new? You just don't seem to
understand that random
> sites
> switching ColdFusion for something else doesn't mean
that at the same time
> there are likely new adopters of ColdFusion. You just
don't know about
> them,
> while you can more easily track if some of them go away.
You don't
> actually
> have anything but blind guesses about what's happening.
>
> I'm seeing more CF frameworks pop up as ever before. And
In Finland, I'm
> seeing more ColdFusion hosting appear than ever before.
>
> >Why did MM/Adobe pull an entire team of employees
out of Australia? Why
> >did
> >they stop printing ads in all of the trade
magazines? Why did MM push PHP
> >more than CF on their website?
>
> Maybe you should be answering those questions, since you
seem to know
> they're
> true, and I haven't heard of any such things.
>
> > Why don't they invest in an IDE to atract all those
developers out there
> that like a complete RAD platform?
> > So on and so forth???
>
> So you know they're not investing in one? And I thought
DreamWeaver would
> act
> as one? Or third party products like CFEclipse? Or
Adobe's IDE extensions
> for
> Eclipse? Sure, the CF IDE's lack behind the automation
and insight
> functionality of other IDEs, and that's something I'm
hoping for too...
> although I've always felt that strong IDEs are strictly
necessary only for
> programming languages where a huge number of
non-user-defined libraries
> and
> classes are to be referenced. The level of automation in
ColdFusion (lots
> of
> action with little code) make complex IDEs less
important than with most
> other
> languages.
>
> -Ari Ferneilus
>

Can we add a new column in report which is not in table.

Hi All,
Can we create a new column in report which is not in table.
I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
Regards
Edited by: User_Apex on May 16, 2011 5:54 AM

Standard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
Then the adding a column in the query would be your best best...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

Problem with adding a new InfoProvider in Report Designer

Hey experts,
I have a problem to add a new Infoprovider in Report Designer. I get the following message:
Query consists variables. Please use a query view (variables are filled).
Can anyone tell me what the problem is.
Thanks in advance.
Best Regards
Ali

Hi Ali,
Note 931838 describes this issue.
Best regards,
Janine

How to create new Custom XML Report without using Form Builder

Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
Abhi

Hi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode

Cannot save Crystal report layout or view new layout of report

I am trying to make a change to a system crystal report (cust. recievables detailed aging). I had to make the date feild a little wider, so I edited the "system layout" that came with SAP (in my test DB of course), and I go to add-ins>sap business one>save. I get the following error "current user has no permissions for this operation". I am logged in as a superuser and full perm.
If I "save-as" and save it to a layout in sap....when I go to open the aging with my newly created layout it freezes and asks for DB logon info to connect to my server from crystal. I do not normally have to do this when I preview my reports in the out of the box layouts. WHat am I doing wrong? I am new to crystal.

The system will not allow me to export the system crystal report....it is grayed out, and it IS a crystal report. HOwever I can open it in crystal, then save it to my desktop, then from INSIDE of SAP in the report and layout manager I import the crystal report I made the changes to from my desktop into SAP and it saves and imports no problems. However when I go to view the report (and this is only the ones I import), it prompts me with the db login for our server to connect, and it is only with that report, once I enter sa credentials it is fine and shows up from there on in, but not if I log out of SAP and back in...then I have to put in my credentials again. Is this something having to do with the report when I make changes to it? I cant have users entering login info each time they run the new aging details report. Please advise what I may be doing wrong when I make changes to a crystal report. It was a very minor change....just moved a feild width.

New to oracle report builder

Dear all;
Please pardon me. I am new to oracle report builder and I am trying to accomplish the following. First and foremost please find my pl/sql queries below. Kindly note, all the queries have been tested and I just need to be able to input those queries into the report builder. Thank you.
create or replace package test1 is
type r_cursor is ref cursor;
function report(company_name in varchar2) return r_cursor;
end test1;
create or replace package body test1 is
function report(company_name in varchar2) return r_cursor as
my_r_cursor r_cursor;
begin
if(company_name = 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t;
return my_r_cursor;
elsif(company_name != 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t
where t.t_id = company_name;
return my_r_cursor;
end if;
end;
end test1;
create table t1
t_id varchar2(200) not null,
t_description varchar2(250),
primary key(t_id)
insert into t1
(t_id, t_description)
values
('CITI', 'PROFIT: 2.2Billion');
insert into t1
(t_id, t_description)
values
('GE', 'PROFIT: 1Billion');
insert into t1
(t_id, t_description)
values
('JPMORGAN','PROFIT: 0');Now, I am trying to create a simple report in oracle report builder. The interface for generating for this report is basically, there is a dropdownlist where by the user picks a company name from the dropdownlist and clicks on the go button, this should then generate a report with the above query shown in the package. How can this be achieved? All help will greatly be appreciated.

Hi,
first of all you need strong typed ref cursor, oracle reports need to detect witch are the columns returned by your cursor.
so first you create your package
create or replace package test1
as
TYPE t_record IS RECORD ( company_number PLS_INTEGER--TABLE_NAME.COLUMN_NAME%TYPE
, company_desc VARCHAR2(150)--TABLE_NAME.COLUMN_NAME%TYPE
TYPE T_REF_CURSOR IS REF CURSOR RETURN t_record;
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor) ;
end test1;
show errors
create or replace package body test1
is
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor)
is
my_r_cursor T_REF_CURSOR;
begin
if(company_name = '1')
THEN
open my_r_cursor for
select 1 as t_id, 'description' ast_description from dual
else
open my_r_cursor for
select 2 as t_id, 'description2' as t_description from dual
end if;
end;
end test1;
show errors
then, in your report you create a ref cursor query :
function QR_1RefCurDS
return test1.t_ref_cursor
is
C_return test1.t_ref_cursor;
begin
test1.report(1,C_return);
RETURN(C_return) ;
end;
hope this helps you !
E

New bug introduced with Keynote 5.2 - Set timing and order of each build has stopped working properly on Smart Builds

Hi there,
We're heavy users of Keynote and have noticed a new bug has recently been introduced into something that was stable. I think it has emerged in Keynote 5.2, could have been Keynote 5.1 also.
It's in the area of Set Timing and Order of each build when used on a Smartbuild. You can no longer set the Start Build field for each instance within the Smart build when the instances are interspersed between other items. The Start build field is just blank and unselectable.
To see this :
1. Create a bullet point list with 4 lines
2. Set build to Appear
3. Set "Set Timing and Order of each Build" to on
4. Create a Smart Build - set to flip
5. On the Smart Build Set "Set Timing and Order of each Build" to on
5. re-order the items in your Build Order so that they alternate between the bullet point and the smart build flip
At this point, you used to be able to set the bullets so that they Started on Click and then set the smart builds to Start with previous. This gave you a nice and very useful effect where you could click to reveal a bullet point and at the same time flip in a corresponding image. We've used this loads of times in our company presentations.
With a recent keynote update ( I think 5.2 maybe, could have been 5.1) this functinality has been lost. have tried it on Lion and Mountain Lion and it's not an OS issue, its a Keynote issue.
Could anyone from Apple acknowledge that they know the issue and suggest if it will get fixed? Right now we're hunting round for an old Keynote 9 DVD so we can install a pre build 5.2 version.
Thanks

Hi glennelliott72,
I've noticed the bug you describe and to me it's very irritating.
I also found some differences in the build menu between the last release and the previous one, and between the Mac OS X and iOS versions. For instance, the blast build doesn't exist anymore in Keynote 5.2 but it's still in the version for iOS 6.
What is your experience about?
I currently use OX Lion.
Thank you

Creation of new conditions in reports

hi,
plz tell me the steps in creating new conditions in reports.what is the difference b/n conditions and new conditions?
thanks ,
jack

Hi Jack,
You can formulate conditions in the query designer to make data analysis more efficient. In the results area of the query, the data is filtered according to the conditions so that only the part of the results area that you are interested in is displayed.
Procedure
Choose New Condition. (You can find this menu entry in the Query Designer toolbar under This graphic is explained in the accompanying text to the right of This graphic is explained in the accompanying text Condition). The Define Condition dialog box appears.
Specify a name for the condition in the Description field.
Note:If you only want to define the condition and not execute it actively in the query, remove the check from the active, which was set by default.
You now have the following options:
If the condition lines below are to be evaluated independent of one another for all of the characteristics in the drilldown and you want to use the same condition for multiple characteristics of the query, select Evaluate Conditions Below for All Characteristics in the Drilldown Independently.
You can choose from the following operators for threshold conditions:
   Is equal to
-         Is not equal to
-         Is less than
-         Is greater than
-         Is less than or equal to
-         Is greater than or equal to
-         Is between (is in the interval)
-         Is not between (is not in the interval)
These operators demand a floating point number as a value. For the operators is in interval and is not in interval, you must enter a value area, that is, a lower and an upper threshold value.
You can choose from the following operators for ranked list functions:
¡        Top N
¡        Bottom N
¡        Top percent
¡        Bottom percent
¡        Top sum
¡        Bottom sum
You can find additional information about using operators for range lists under Conditions.
http://help.sap.com/saphelp_erp2004/helpdata/en/43/b57138c1afbd20e10000009b38f889/frameset.htm
Regards
Hari

How to add new fields in report painter without library

Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhan

hi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest

How to add new column in report painter

Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...

HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar

At New in OOABAP Report

Hi,
Could anyone post solution for the given below issue.
I have to handle control break command 'AT NEW' in ALV Reports using Global Classes(OOABAP), If possible with a small sample code which is more relative.

Read first this documentation [ALV Grid Control (BC-SRV-ALE)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf] and then elaborate a little more on your actual requirement.
Also perform some [search at sdn|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=%22atNEW%22OO+ALV&adv=false&sortby=cm_rnd_rankvalue#] and please don't post too many threads.
Regards

New bug to report

Similar Messages

Maybe you are looking for