New build 9860 discards all installed 64bit programs

Hi!
After installing the new build 9860 the "Program" folder is cleared. All previously user installed programs are discarded. I tried it two times with the same results. 32bit programs were kept.
Any ideas?
Regards

Hi gogosch,
Sometimes, when you perform upgrade, it would check the compatibility issue first, if it detects something would prevent upgrade, it would remove the problematical applications.
Currently, we did many tests on upgrade, this is the probable reason for your situation.
Or if it is possible, can you give us some samples of 64 bit application, I would like to perform a test to confirm this issue.
Alex Zhao
TechNet Community Support

Similar Messages

I have Adobe Photoshop Elements 12..It was installed on a previous p.c. and I just purchased a new p.c. I installed the program on the new p.c. but it wont let me edit photos...what is wrong?

Can anyone help me with my problem?

Hi Shirley, If you can get to Expert Mode in the Editor it should be possible to click the top menu: Help >> Sign-in. If that doesn’t work you need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

I don't have a disk drive, but need to install this program onto my new laptop. What do I do?

I got a new laptop and need to install my program onto it. I have the CD's but no disc drive to put them into my computer. What should I do?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

New Site, New server SCCM 2012 R2 install fails at sp_createlocaleinfo

Server 2012 R2 new build, SQL 2012, fresh install, SCCM 2012 R2 new install. All on one system. No clustering.
All the prerequisites check out OK. But the install fails at sp_createlocaleinfo:
INFO: SQL Server script: Create object spprocessdrsrecoveryversionmessage $$<Configuration Manager Setup><01-03-2014 12:27:56.167-60><thread=3292 (0xCDC)>
INFO: SQL Server script: Create object sp_makesureintervalexists $$<Configuration Manager Setup><01-03-2014 12:27:56.198-60><thread=3292 (0xCDC)>
*** -- ~-- Name         : sp_CreateLocaleInfo ~-- Definition   : SqlObjs ~-- Scope        : CAS_OR_PRIMARY ~-- Object       : P ~-- Dependencies
: <Detect> ~-- Description : <Please provide a description for this object> ~-- ~CREATE PROCEDURE sp_CreateLocaleInfo @_ciid int, @digest xml(CIDigest) AS ~BEGIN ~ ~    if (exists (select 1 from CI_ConfigurationItems where
CI_ID=@_ciid and CIType_ID=21)) ~    begin ~       --It is a DT, only create localized info for default local ~       ;WITH XMLNAMESPACES ~  (
~    N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~  ) ~  insert into CI_LocalizedCIClientProperties( CI_ID, LocaleID, Title, [Description]) ~ ~   select ~
@_ciid, ~      65535, ~     ISNULL(@digest.value('(/app:DeploymentType/app:Title)[1]', 'nvarchar(256)'), '') as Title, ~     ISNULL(@digest.value('(/app:DeploymentType/app:Description)[1]', 'nvarchar(2048)'),
'') as [Description] ~      ~    end ~    else ~    begin ~  ;WITH XMLNAMESPACES ~  ( ~    N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest'
as app ~  ) ~  insert into CI_LocalizedCIClientProperties( CI_ID, LocaleID, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl,InfoUrlText, PrivacyUrl, UserCategories, Tags, Icon ) ~ ~   select ~
@_ciid, ~     case ISNULL(cidigest.tc.value('(./@Language)[1]', 'nvarchar(10)'), '') when '' then 0 else ~    dbo.fnLShortNameToLCID(cidigest.tc.value('(./@Language)[1]',
'nvarchar(10)')) end as lcid, ~ ~     cidigest.tc.value('(app:Title)[1]', 'nvarchar(256)') as Title, ~     cidigest.tc.value('(app:Description)[1]', 'nvarchar(2048)') as [Description], ~     cidigest.tc.value('(app:Publisher)[1]',
'nvarchar(512)') as Publisher, ~     cidigest.tc.value('(app:Version)[1]', 'nvarchar(512)') as [Version], ~     cidigest.tc.value('(app:ReleaseDate)[1]', 'nvarchar(64)') as ReleaseDate, ~ ~     cidigest.tc.value('(app:InfoUrl)[1]',
'nvarchar(1024)') as InfoUrl, ~     cidigest.tc.value('(app:InfoUrlText)[1]', 'nvarchar(1024)') as InfoUrlText, ~     cidigest.tc.value('(app:PrivacyUrl)[1]', 'nvarchar(2048)') as PrivacyUrl, ~
cidigest.tc.query('app:UserCategories') as UserCategories, ~     cidigest.tc.query('app:Tags') as Tags, ~ ~     ( ~     select top 1 icons.tc.value('xs:base64Binary((./app:Data)[1])', 'varbinary(max)')
~     from @digest.nodes('/app:AppMgmtDigest/app:Resources/app:Icon') as icons(tc) ~     where ~    icons.tc.value('(./@Id)[1]', 'nvarchar(1024)') = cidigest.tc.value('(./app:Icon/@Id)[1]',
'nvarchar(1024)') ~     ) ~     as Icon ~ ~   from @digest.nodes('/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info') as cidigest(tc) ~   where dbo.fnLShortNameToLCID(cidigest.tc.value('(./@Language)[1]',
'nvarchar(10)')) != 0; ~ ~   --insert default info. ~   declare @defaultlocal nvarchar(20); ~ ~ ~  ;WITH XMLNAMESPACES ~  ( ~    N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest'
as app ~  ) ~   select @defaultlocal = info.loc.value('(./@Language)[1]', 'nvarchar(20)') from @digest.nodes('/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~
') as info(loc) ~   where ISNULL(info.loc.value('(./@Language)[1]', 'nvarchar(20)'), '') = ISNULL(@digest.value('(/app:AppMgmtDigest/app:Application/app:DisplayInfo/@DefaultLanguage)[1]', 'nvarchar(20)'), '');
~ ~ ~  if @defaultlocal is null ~  begin ~ ~    if exists (select 1 from @digest.nodes('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~           /app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~           ') as info(loc) ~
where info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest"; ~
(./@Language)[1]', 'nvarchar(20)') = 'en') ~     begin ~     set @defaultlocal = 'en'; ~     end else if exists (select 1 from @digest.nodes('declare
namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest"; ~
/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~           ') as info(loc) ~           where info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~           (./@Language)[1]', 'nvarchar(20)') = 'en-US') ~     begin ~      set @defaultlocal = 'en-US'; ~
end else ~     begin ~     select @defaultlocal = lo from ( select top 1 ISNULL(info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~           (./@Language)[1]', 'nvarchar(20)'), '') as lo from @digest.nodes('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~           /app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~           ') as info(loc)) as tdb ~     end ~  end ~
~  if not exists (select 1 from CI_LocalizedCIClientProperties lp where
lp.CI_ID=@_ciid and lp.LocaleID=65535) ~  begin ~  insert into CI_LocalizedCIClientProperties ( CI_ID, LocaleID, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl, UserCategories, Tags,
Icon ) ~   select CI_ID, 65535, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl, UserCategories, Tags, Icon from ~   CI_LocalizedCIClientProperties lp where lp.LocaleID = dbo.fnLShortNameToLCID(@defaultlocal)
and lp.CI_ID = @_ciid ; ~   end; ~ ~ ~  --Expend categories. ~   ;WITH XMLNAMESPACES ~   ( ~    N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~
) ~   insert into CI_LocalizedCIClientTags (CI_ID, LocaleID, Tag, [Type]) ~   select distinct tt.CI_ID, tt.LocaleID, RTRIM(LTRIM( cate.tag.value('(.)[1]', 'nvarchar(513)'))) as tag, ~   N'UserCategory' ~   from ~
CI_LocalizedCIClientProperties as tt cross apply tt.UserCategories.nodes('/app:UserCategories/app:Tag') as cate(tag) ~   where tt.CI_ID = @_ciid ; ~  ---Expend tags. ~   ;WITH XMLNAMESPACES ~   ( ~
N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~   ) ~  insert into CI_LocalizedCIClientTags (CI_ID, LocaleID, Tag, [Type]) ~  select distinct tt.CI_ID, tt.LocaleID, cate.tag.value('(.)[1]',
'nvarchar(513)') as tag, ~  N'Tag' ~  from ~  CI_LocalizedCIClientProperties as tt cross apply tt.Tags.nodes('/app:Tags/app:Tag') as cate(tag) ~  where tt.CI_ID = @_ciid ; ~    end ~END ~ $$<Configuration
Manager Setup><01-03-2014 12:28:09.027-60><thread=3292 (0xCDC)>
*** [42000][701][Microsoft][SQL Server Native Client 11.0][SQL Server]There is insufficient system memory in resource pool 'internal' to run this query. : sp_CreateLocaleInfo $$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292
(0xCDC)>
ERROR: SQL Server error: [42000][701][Microsoft][SQL Server Native Client 11.0][SQL Server]There is insufficient system memory in resource pool 'internal' to run this query. : sp_CreateLocaleInfo $$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292
(0xCDC)>
Failed to execute sql command -- ~-- Name         : sp_CreateLocaleInfo ~-- Definition   : SqlObjs ~-- Scope        : CAS_OR_PRIMARY ~-- Object
: P ~-- Dependencies : <Detect> ~-- Description : <Please provide a description for this object> ~-- ~CREATE PROCEDURE sp_CreateLocaleInfo @_ciid int, @digest xml(CIDigest) AS ~BEGIN ~ ~    if (exists (select 1 from CI_ConfigurationItems
where CI_ID=@_ciid and CIType_ID=21)) ~    begin ~       --It is a DT, only create localized info for default local ~       ;WITH XMLNAMESPACES ~  (
~    N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~  ) ~  insert into CI_LocalizedCIClientProperties( CI_ID, LocaleID, Title, [Description]) ~ ~   select ~
@_ciid, ~      65535, ~     ISNULL(@digest.value('(/app:DeploymentType/app:Title)[1]', 'nvarchar(256)'), '') as Title, ~     ISNULL(@digest.value('(/app:DeploymentType/app:Description)[1]', 'nvarchar(2048)'),
'') as [Description] ~      ~    end ~    else ~    begin ~  ;WITH XMLNAMESPACES ~  ( ~    N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest'
as app ~  ) ~  insert into CI_LocalizedCIClientProperties( CI_ID, LocaleID, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl,InfoUrlText, PrivacyUrl, UserCategories, Tags, Icon ) ~ ~   select ~
@_ciid, ~     case ISNULL(cidigest.tc.value('(./@Language)[1]', 'nvarchar(10)'), '') when '' then 0 else ~    dbo.fnLShortNameToLCID(cidigest.tc.value('(./@Language)[1]',
'nvarchar(10)')) end as lcid, ~ ~     cidigest.tc.value('(app:Title)[1]', 'nvarchar(256)') as Title, ~     cidigest.tc.value('(app:Description)[1]', 'nvarchar(2048)') as [Description], ~     cidigest.tc.value('(app:Publisher)[1]',
'nvarchar(512)') as Publisher, ~     cidigest.tc.value('(app:Version)[1]', 'nvarchar(512)') as [Version], ~     cidigest.tc.value('(app:ReleaseDate)[1]', 'nvarchar(64)') as ReleaseDate, ~ ~     cidigest.tc.value('(app:InfoUrl)[1]',
'nvarchar(1024)') as InfoUrl, ~     cidigest.tc.value('(app:InfoUrlText)[1]', 'nvarchar(1024)') as InfoUrlText, ~     cidigest.tc.value('(app:PrivacyUrl)[1]', 'nvarchar(2048)') as PrivacyUrl, ~
cidigest.tc.query('app:UserCategories') as UserCategories, ~     cidigest.tc.query('app:Tags') as Tags, ~ ~     ( ~     select top 1 icons.tc.value('xs:base64Binary((./app:Data)[1])', 'varbinary(max)')
~     from @digest.nodes('/app:AppMgmtDigest/app:Resources/app:Icon') as icons(tc) ~     where ~    icons.tc.value('(./@Id)[1]', 'nvarchar(1024)') = cidigest.tc.value('(./app:Icon/@Id)[1]',
'nvarchar(1024)') ~     ) ~     as Icon ~ ~   from @digest.nodes('/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info') as cidigest(tc) ~   where dbo.fnLShortNameToLCID(cidigest.tc.value('(./@Language)[1]',
'nvarchar(10)')) != 0; ~ ~   --insert default info. ~   declare @defaultlocal nvarchar(20); ~ ~ ~  ;WITH XMLNAMESPACES ~  ( ~    N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest'
as app ~  ) ~   select @defaultlocal = info.loc.value('(./@Language)[1]', 'nvarchar(20)') from @digest.nodes('/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~
') as info(loc) ~   where ISNULL(info.loc.value('(./@Language)[1]', 'nvarchar(20)'), '') = ISNULL(@digest.value('(/app:AppMgmtDigest/app:Application/app:DisplayInfo/@DefaultLanguage)[1]', 'nvarchar(20)'), '');
~ ~ ~  if @defaultlocal is null ~  begin ~ ~    if exists (select 1 from @digest.nodes('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~           /app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~           ') as info(loc) ~
where info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest"; ~
(./@Language)[1]', 'nvarchar(20)') = 'en') ~     begin ~     set @defaultlocal = 'en'; ~     end else if exists (select 1 from @digest.nodes('declare
namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest"; ~
/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~           ') as info(loc) ~           where info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~           (./@Language)[1]', 'nvarchar(20)') = 'en-US') ~     begin ~      set @defaultlocal = 'en-US'; ~
end else ~     begin ~     select @defaultlocal = lo from ( select top 1 ISNULL(info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~           (./@Language)[1]', 'nvarchar(20)'), '') as lo from @digest.nodes('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~           /app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~           ') as info(loc)) as tdb ~     end ~  end ~
~  if not exists (select 1 from CI_LocalizedCIClientProperties lp where
lp.CI_ID=@_ciid and lp.LocaleID=65535) ~  begin ~  insert into CI_LocalizedCIClientProperties ( CI_ID, LocaleID, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl, UserCategories, Tags,
Icon ) ~   select CI_ID, 65535, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl, UserCategories, Tags, Icon from ~   CI_LocalizedCIClientProperties lp where lp.LocaleID = dbo.fnLShortNameToLCID(@defaultlocal)
and lp.CI_ID = @_ciid ; ~   end; ~ ~ ~  --Expend categories. ~   ;WITH XMLNAMESPACES ~   ( ~    N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~
) ~   insert into CI_LocalizedCIClientTags (CI_ID, LocaleID, Tag, [Type]) ~   select distinct tt.CI_ID, tt.LocaleID, RTRIM(LTRIM( cate.tag.value('(.)[1]', 'nvarchar(513)'))) as tag, ~   N'UserCategory' ~   from ~
CI_LocalizedCIClientProperties as tt cross apply tt.UserCategories.nodes('/app:UserCategories/app:Tag') as cate(tag) ~   where tt.CI_ID = @_ciid ; ~  ---Expend tags. ~   ;WITH XMLNAMESPACES ~   ( ~
N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~   ) ~  insert into CI_LocalizedCIClientTags (CI_ID, LocaleID, Tag, [Type]) ~  select distinct tt.CI_ID, tt.LocaleID, cate.tag.value('(.)[1]',
'nvarchar(513)') as tag, ~  N'Tag' ~  from ~  CI_LocalizedCIClientProperties as tt cross apply tt.Tags.nodes('/app:Tags/app:Tag') as cate(tag) ~  where tt.CI_ID = @_ciid ; ~    end ~END ~~
$$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292 (0xCDC)>
ERROR: Failed to execute SQL Server script: Create SQL object sp_createlocaleinfo~ $$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292 (0xCDC)>
ERROR: SQL Server error: <> $$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292 (0xCDC)>
~~===================== Completed Configuration Manager 2012 Server Setup ===================== $$<Configuration Manager Setup><01-03-2014 12:28:09.136-60><thread=3292 (0xCDC)>
CarolChi

Yes I found your guide and followed it.
Stuck after 16 hours at LU_SoftwareList
INFO: Extracted file D:\Program Files\Microsoft Configuration Manager\AI\LU_CAL_ProductList.csv $$<Configuration Manager Setup><01-04-2014 17:27:57.606-60><thread=520 (0x208)>
INFO: Extracted file D:\Program Files\Microsoft Configuration Manager\AI\watermark.txt $$<Configuration Manager Setup><01-04-2014 17:27:57.606-60><thread=520 (0x208)>
INFO: Successfully expanded CSV files $$<Configuration Manager Setup><01-04-2014 17:27:57.606-60><thread=520 (0x208)>
INFO: Starting data import data to table: LU_LicensedProduct $$<Configuration Manager Setup><01-04-2014 17:27:57.638-60><thread=520 (0x208)>
INFO: Successfully imported data to table LU_LicensedProduct $$<Configuration Manager Setup><01-04-2014 17:28:01.717-60><thread=520 (0x208)>
INFO: Starting data import data to table: LU_Category $$<Configuration Manager Setup><01-04-2014 17:28:01.717-60><thread=520 (0x208)>
INFO: Successfully imported data to table LU_Category $$<Configuration Manager Setup><01-04-2014 17:28:01.764-60><thread=520 (0x208)>
INFO: Starting data import data to table: LU_SoftwareList $$<Configuration Manager Setup><01-04-2014 17:28:01.764-60><thread=520 (0x208)>
CarolChi

Labview 8.2 application builder - installer deletes previously installed programs

Problem Description :
I've been developing with LabView for 8+ years and recently had to upgrade from 6.1 to 8.2 because of compatibility issues with LabView, MAX, DAQ and SERIAL. LabView had always been so intuitive and efficient, but that has changed to some degree sometime after 6.1 IMO. I won't get further into that, but I am having several problems with Application Builder and particularly, with creating an Installer and installing test programs. I haven't seen many posts on this subject so I assume I am doing something wrong.
In 6.1, I could build a program and create an installer in minutes, and all in the same step - Click on Build and the installer was created. I could also locate my files anywhere I wanted. Unfortunately the process in 8.2 is no where as simple as one has to create a build and installer separately. So far, I haven't been able to distribute my installer files where I want them according to our internal procedures. The build portion works fine and I can locate my files as needed, but not so for the installer (at least I haven't figured it out yet). The main problem is that I have some common DLLs that I'd like to locate in a common directory for all of my programs, but it seems like I'm stuck putting them in the installation directory of every program that I write. Again, it is fine in build. There doesn't seem to be any flexibility in changing the location of the files in the installer. I did see a post somewhere that mentioned that DLL files must be located in the system directory if you don't want them included in the build or installation. I would just like to install the dlls to a common directory and not include them in every installation directory. Just like I did in LV 6.1!
This is a relatively minor problem compared to what happens when I try to install the programs.
I have five separate programs for which I have recently built and created installers with the limitations that I've described above. I can install one program on my machine and it runs properly. If I try to install any of the
other four, they will delete the previous installation - all the files are deleted (they all have different names). What I think is going on is that the installer thinks that these five programs are the same and simply overwrites the previous installation. One reason I believe this, is because I tried an installation and it failed with the error message that there was already a higher version installed. The higher version it was referring to was almost certainly the one program I could install, but certainly not a higher version of the one I was trying to install (it didn't exist yet). After I uninstalled the one program, I could install any other four. It doesn't matter if I install on the build computer or the target computer (ATE).
What am I doing wrong? Please help me to resolve this problem.
I wan't the build and install files in the same exact location:
Example of my five programs and the locations of build and install:
C:\KIK2-LabView\Customer Name\Base Part Number1\Program1.exe.......
C:\KIK2-LabView\Customer Name\Base Part Number2\Program2.exe.......
C:\KIK2-LabView\Customer Name\Base Part Number3\Program3.exe.......
C:\KIK2-LabView\Customer Name\Base Part Number4\Program4.exe.......
C:\KIK2-LabView\Customer Name\Base Part Number5\Program5.exe.......
The support files will also be put in the corresponding directories. The common files were supposed to go in the KIK2-LabView directory instead of copies in every installation directory.
Is there something I have to do with the registry? In 6.1 it was all automatic.
I hope there are simple answers to my problems, but I have yet to find them out. I have been able to find very little info on Application Builder, and nothing that is comprehensive.
Thanks!

Thank for the reply, Andy
I have scoured the Help files and this forum which helped me to create the build and installer, but they didn't address any of the problems that I described in my post. I tried to make sure that I exhausted numerous resources before posting and requesting help.
I appreciate the response, but you didn't quite get to my most important problem - that when I try to install a program from the created installer, it overwrites my previously installed program. Actually I have found the answer in a different thread. --->  http://forums.ni.com/ni/board/message?board.id=140&message.id=16146. My problem is that I cut and pasted all of my project files and made the appropriate changes specific to each new project. If you don't create brand new builds and installers in these projects, you will create duplicate registry keys, even though all of the names, numbers, files, etc. were changed to be completely unique. I opened the .lvproj file in notepad and found several registry keys to be the same; here is an example:
<Property Name="UpgradeCode" Type="Str">{831013BF-9112-45AA-BF13-A13F08098841}</Property>
All of the projects that I created by cut and paste (and edit) method had this same exact key (as well as other keys) which was causing the previous install to be deleted/overwritten or gave me the message that a higher version already existed.  Again, this happened even though all of the project data was completely unique after it was edited, including the project filename (of course). Finally, I completely rebuilt my projects from scratch starting with "New Project" and voila, they now all install properly. Obviously, none shared any of the same registry keys.
I don't know if this is something that was overlooked, but it is so much easier to cut, paste and edit projects when they are very similar.   Unfortunately I have found out the hard way that new build and install spec's must be created. Is there a change that can be made to the Project File in LabView so that when certain information changes (like the executable file name) that new registry keys will be generated? It is obvious that you don't want someone to accidentally install a lower version of the project over a newer one, but it would have prevented my work time loss (several days) and will prevent time loss for others in the future as well. Could you at least consider allowing the developer to generate new keys like was available in LabView 6.1?
Also concerning the location of files, I previously had done all of what you said and can locate the build files where I want. However, in the Installer (Source Files Tab), when I create the folders in [Windows Volume], all of the files from the build spec are put into the SAME directory, regardless of where they were located in the build spec. If I try to delete one file, all will be removed. I can't place individual files where I want them to go in the installer (if they are a part of the build). Example: In the installer, I created the subfolders KIK2-LabView\Customer\UUT Base Part Number on the [Windows Volume] directory and set the UUT Base Part Number as default. I want most of the files to go into the default directory, but a few of the dependent dll's should go into the KIK2-LabView folder as they are common to many other programs/projects. In short, I don't need or desire 50 copies of these dlls on my ATE. I was able to locate the installer files anywhere in LabView Pro 6.1, but so far I can't figure out if this is possible in 8.2. It would appear that it is not.
Thanks,
John W.

Can't Install new Build

First time running Windows Technical Preview Build 9841 I was able to upgrade to Build 9860 but then during the release of Build 8979 I keep getting this error "failed to check for new preview build, please try again later. 0x80244022". I'm tried
everything from changing my time to correct and past time. Running Windows maintenance along with "Windows Update troubble shoot" and using third party software such as Advance systemcare and Jet clean.. Nothing worked so I did a reinstall and reformat
of my laptop TWICE and I'm still getting the same error. I understand that today Microsoft Server for Windows App store was having issues but I've had this issue way before this. I've also check and the app store issue seems to be fixed and I retried to install
Build 9860 on my fresh install of Build 9841. Nothing works? Any ideas?

Would you care to do a clean install by downloading build 9879 Enterprise ISO, burn it to a bootable DVD or Flash Drive and then install ?Enterprise version has everything in a non- enterprise version plus a few extra features gear towards business
people. You don't have to use them at all.
If that is acceptable, here are the links :
Windows 10 Enterprise build 9879 64-bit
ISO image
Windows 10 Enterprise build 9879 32-bit
ISO image

Can I backup my iPhone into a new iTunes install on a new PC without losing all my data?

I've recently lost an old Windows XP PC which I have been using for several years and had my entire iTunes library and iPhone history. I have since purchased a new Windows 7 PC and installed itunes onto it.
Is it possible for me to sync my iPhone onto the new computer without losing any of the data on my phone? I don't have any music stored on my iPhone so that's not a problem, however, I do need to save all the current Contacts, Messages, E-Mails and Photos that are on the iPhone. Any help is much appreciated in this matter.
- JD.

By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are replacing your computer, your phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else, as Apple makes no provision to do so:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in itunes(under the edit menu if using Windows).
2. Make sure you have one contact & one event in the supported applications(Outlook, Windows Address Book) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go.

I just migrate settings and software from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install.

I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.

never migrate adobe software. it should be properly installed.
uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Hi. I recently got a new computer and transferred all my files across using TimeMachine. Whenever I try to sign into any CC program (including CC) the program instantly shuts down and an Apple error message comes up. I have uninstalled and reinstalled CC

Hi. I recently got a new computer and transferred all my files across using TimeMachine. Whenever I try to sign into any CC program (including CC) the program instantly shuts down and an Apple error message comes up. I have uninstalled and reinstalled CC twice with no avail and deleted every Adobe product on my computer and nothing is working.

I have seen similar discussions before... transferring does not work, you must install
Discussions of RE-installing
-http://forums.adobe.com/thread/1408331?tstart=0
-http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.

Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Install build# 9860 error 0x80240016

hi
I am trying to install build 9860 from my Windows 10 build 9841 although I receive the error bellow, I have tried the installation many times.
"Failed to install the new preview build. Please try again later. 0x80240016"

Hi ErfanTaheri,
For this kind of issue, there would be many reasons to cause this failure. To find the reason, we can check the following log file:
C:\$windows~BT\Source\Panther\setupact.log
Here we can get an information about the failure.
Alex Zhao
TechNet Community Support

Software Metering Report - Install base for all metered software programs - Returns 0

Hi All
I have an issue with one of the software metering reports, Install base for all metered software programs. when run it returns that the metered software is installed on 0 computers.
All usage reports seem to work correctly and I can see usage data for the monitored applications. But anything related to install base such as the one listed above and "Computers that have a metered program installed but have not run the program since
a specific date" either return 0 or are blank.
Any help will be greatly appreciated

Hi All
finally found a fix to the problem. It was very closely related to what Gareth had mentioned regarding Asset Intelligence. The actual method of detecting if a program is installed is done through Software Inventory
Under Custom Client Settings i had enabled Software Inventory on client but never setup any rules to gather data. So i created a new rule for all *.exe files and around an hour later the report started to show up clients.
This blog post also describes the method of setting up software inventory correctly
Thanks to all the help and hopefully this will aid anyone else encountering similar problems

How do I close all browsers to install a program I downloaded? I didn't think I had any open, how do I check?

Please can anyone help, I am a new MAC user and am trying to install a program I have downloaded but I get a message saying to "close all browsers". I wasn't aware I had anything else open, how do i find this out?

Press the command+tab keys and if anything is listed in the dialog window that comes up, other then Finder, then you have some programs open even if there are no on screen windows displayed for those programs. Once the name of the program is in the menu bar press command+q keys to quit those programs.

Why after updating to new I Tunes version all Office programs open in ITunes and have ITune icons.

After downloading new version of ITunes all Office Programs icons changed to ITunes and only open ITunes. OS is Windows7 64bit machine

Download and apply the lnk registry fix from:
http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restor e.html
tt2

New build property, horrible BT phone line install...

Hi all.
I am writing here because I have been thrown around by BT and the phone line installation team over the past one month, and I have just run out of patience.
The entire experience started in late May, when I phoned BT and told them that I was moving house in 2 weeks and that I would need a new phone line installed at the new property, which is a new build. The BT sales team was more than happy to take my order, and since there was a charge of £130 for installation of phone line by itself, I decided to bundle both broadband and telephone line from BT directly to avoid that cost. I was a given an appointment on the 10th of June for my phone and broadband installation.
The 10th of June came and I took the day off work thinking all would be sorted by the end of the day. By the late afternoon no one ahd contacted me and there was no one who had come to the door. I called BT and had them check on my order and they said that "for some reason, the order says its still 'pending' and has not gone through..." After chatting with different people from different teams like sales, orders and them confrerring with engineers and seniors, I was finally told that the order could not be processed because I was in a new build and hence the system could not process a broadband order before there was an active phone line in the property, hence the failure of the order to go through. Next, I was given a date for the phone line order by itself to be done, and although I was frustrated here, I conceded and moved on hoping to get the issue sorted as quickly as possible. The new date was June 22nd for the phone line and then the broadband order to be placed thereafter. At this point I was not sent any emails or letter regarding my order with ym order number or any references, so I should have been sceptical, but I let it slide thinking it would be settled soon.
June 22nd came and I took leave off work again for the 8am - 1pm BT engineer visit. Once again, no one showed up or contacted me. I called BT again desperately hoping that this could not be happening again. When i asked the lady about my order scheduled for that day, she said that the order did not go through once again. It was still 'pending'! I was just shocked. I wanted to explode because twice BT had given me apppointment timings that could not be fulfilled and twice they left me in the lurch when they knew beforehand that the engineers would not show up, leaving me to take time from work which I cannot get back, much less the fact that I still do not even have a phone line. After much chatting with different people on the line I finally got them to book another order this time for July 9th for the phone line.
This time i called back on July 2nd and July 6th to make sure that my order was on track and I was assured that after checking with the 'openreach engineers on their side' that my order was on track and the engineer would show up definitely on 9th of July.
Then the 9th came and I took the morning off from work to wait for the engineer.Yet again, BT managed to show me how poorly they treat customers. No engineer showed up again, and as was becoming a habit now, I had to phone BT to enquire about my order and discover that the engineer was not going to show up today as well. When pressed much more the person on the other end finally relented that the cables from the exchange to my new build property need to be set up and are in the process of being done. I would then get a call when BT/Openreach finally finish this. I felt let down, especially when I asked how long that would be since I have already been waiting for a more than month for BT to carry this out and also agreed to pay the £130 set up charge for the phone line since they wanted to process the phone line order alone first. Her response was nothing more than a "I cannot tell for sure.." and at this point I could tell that meant it could be a really long while more before getting a phone line / broadband, if ever BT is interested in setting it up.
Is there any way to actually check and see if BT are setting up a connection from the exchange to the property for the phone line and how long it would take before I can finally get a simple phone line here?
Sorry if this was a bit of rant but it is rather draining and also costly for me having to deal with BT and wait for them when they could simply communicate with me better to inform me of their engineers' decisions.
Abi
*EDIT* I have also spoken to the developer of the property and they have informed me that the flat is ready for a phone line to be installed, and that BT is only currently fitting phone lines to the building across the road and not my block, so that means someone at BT/Openreach is telling me the worng thing and the engineer is just refusing to come out now. I have additionally spoken to some of the other residents who moved in before me in the same block and they have had phone lines connected to their property by BT so I think this problem needs sorting out asap by BT please.
Thank you.

Hi
It seems that I am caught in the same endless maelstrom of bt/open reach inability to meet installation obligations.
We have a new build home on a small private development. No cable available regrettably so all 6 of our neighbours use bt phone and std broadband.
Ordered both services end April to be told that install appointment was 30 May - seemed a long time but accepted. Had whole series of emails and texts from bt reminding of appointment and arrival of modem, but late evening 29 May text arrived saying order delayed and put back to 13 June. Called following morning and got the run around took 40 mins to get any answer of sense that said ,Line work was required and open reach we're dealing withi it.
13 June came and went no one called or advised that appointment would not be met. Again many phone calls but same answer line issues. My developer tells me that the lines are installed per spec, in fact we have a black network cable present through a conduit next our front door but no terminal box to join up to white phone line wires to inside phone points. Offered bt a photo of this but they will not accept it. Just keep saying line issues holding up install. Either way unless this work is done the it will be impossible to connect even if other work had rally to be done - not interested!
This week promised that all would be done, 16th the 17th and then 18th -nothing again and hence more phone calls.
Issue handed to resolution team who calked today to say work schedule for 12 July! More than two months since order - just don't believe them and asked them to escalate - no hopes up!
In the meantime our phone no rings out and people wonder why we are not answering! Complete shambles.
In 2014 this should be easy meat to BT who seem tied up in a complaint type process that resolves nothing.
I have no real choice but BT and their performance is just hopeless. Advised ofcom but don't deal with individual complaints - this is consumer hell and very very frustrating.

New build 9860 discards all installed 64bit programs

Similar Messages

Maybe you are looking for