New Build can not get past 2E on debug and 2A on dashboard

I have a new build - Big Bang, I7 -950,  Corsair  xms3  8gb 2 X 4, Radeon HD 5770 HD-577A-ZN, WD Caviar Green 1 TB, Liteon 24X DVD,  Ultra X4 750 W modular power supply, 932 HAF Case.
When I boot I can't get past 2E on the debug and 2A on the dashboard and nothing on the monitor.  I have removed everything and replaced it and checked the pins on the processor which are good to go and still  comes up with 2E and 2A   

Quote
Corsair  xms3  8gb 2 X 4
What's the story on the RAM? Dual Channel?  Please provide specific specs, timings, recommended voltage, etc. With an i7 950, presuming this is an Xpower Big Bang & not an 1156 socket variety.

Similar Messages

  • HT4623 I can not get past the license agreement and term and conditions page after updating my i5 IOS

    I can not get past the license agreement and term and conditions page after updating my i5 IOS

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • Can not get past grey apple logo and spinning spokes ?

    I've tried holding down keys (command-s,option,c ...etc) but it just stays on the spinning and there are no sounds ie chimes.
    I've tried booting into osx disk holding the c key and it takes a little longer for the apple logo and spinning wheel to come up but eventually it goes right back into the spinning and I've waited out the spinning for ten to fifteen minutes with no luck.
    The harddrive looks healthy when plugged in externally to my Win7 machine, I've tried moving the memory sticks around with no luck.
    I'm trying to fix this for a friend , there are two actual keys missing the f5 and the #6 key (broke off I guess).

    Ptown wrote:
    Thanks for replying , I'm pretty sure my friend does not have the hardware test disc that came with his macbook pro 06 anymore but I'll ask.
    Yes.
    Is there anything else I could do to solidify that the logic board is toast ?
    If no AHT, make an appt with the "genius" bar at an Apple Store.
    I would think that I wouldn't get anything (black screen) if it was the logic board.
    The LB basically "controls" everything, so depending on what circuits have issues, a bad LB could account for (almost?) any symptom.
    RAM is also a suspect here. It sounds like you did some troubleshooting, but if both modules are third-party (not the original Apple-supplied) RAM, see if the original RAM can be found and tried.

  • I ttunes wants to keep on restoring my phone and I restored a few time now but can not get past the restore screen to load my purchaseed apps etc or sync my phone with new data, it sort of does not recognise the fact that i ihave synced already. Please he

    I Tunes wants to conituiosly restore my phone and after every restore it just goes back to the restore screen and i can not get past that to get to my apps etc.  It is as if the system does noet regognise the fact that the resotre has been done.................

    Follow this very helpful user tip by wjosten:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    Make an appointment at the genius bar and get the phone replaced.

  • I verified my email, then went to sign in and I can not get past the Sign In.

    I need some help. I made an account and verified my email. I then went to sign-in and a box pops up saying I need to review my account. I go back to review it and it takes me to the support page. In other words... I can not get past the Sign In.

    Thanks, Andrew for your help.  Not sure if you will see this, but I did the above and it said the HD was okay.  Rebooted it and still won't go past login page.  Tried it again and this time typed in the line /sbin/fsck -fy and then it came up and said HD was okay, but said something about being modified.  I once more rebooted, but it still won't get past the login screen.  Besides taking long to reboot, as before, I am able to enter my password, but then it hangs up with the rainbow icon rotating continuously.  Does this mean that the disk is corrupt or partially so, and if so, can you advise how I should proceed?  TIA again.

  • I can not get past the setup screen on my reader. What am I doing wrong?

    I can not get past the setup screen on my reader.  What can I do?

    I have no idea what you mean; can you post a screenshot?

  • On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

    On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

    Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing.  You won't lose any data by doing this.

  • My macbook  air is frozen, can not get past login

    Hi my macbook air froze I can not get past the login
    Please help

    "stuck on the page I was trying to  load"
    Page as in webpage on a browser?
    Press Command + Option + Esc to force quit the browser.
    When you post for help, please state which OS X is installed.
    The more details you provide, the easier to help.

  • Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help? I have tried the other  option that were posted. None of them worked!

    Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help?

    ExciteWalk wrote:
    I can't post the link here cause I'll probably get banned at this point. So help yourself and search rumors elsewhere
    That's not very helpful, why are you here?

  • TS3992 i have the message that the ipad has not been backed up successfully in 2 weeks, but can not get past the message to use the Ipad

    I am trying to unlock my ipad with the message that the ipad has not been backed up successfully in 2 weeks, but can not get past this screen. I have plugged it in, it is connected to the internet, but will not back up or do anything else.  What can I do?

    Welcome to the Apple Support Communities
    Hold Sleep and Home buttons until the iPad restarts, so you will be able to use your iPad

  • After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store.

    After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store. Any clue why?
    Regards,
    Maciek

    Click the round flag icon bottom right corner of the App Store window.

  • I had to change my email acct and do not have access to the original one my icloud, iTunes,etc have. I changed it and signed out and was able to successfully change to the new email on iTunes and Apple ID. However, I can not get icloud to change over and.

    I can not get icloud to let me change the email to my new acct???

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Can not get past program load-up

    The program was working fine however recently I can not move past loading up the program. I access aperture and the program comes up however then I go in to a in-definate loadup and cannot move forward.
    This all happened after I deleted a project and then tried to move it back from my trash. The folder name was created however it never loaded completely and told me to re-boot system.
    After re-boot, this is the current situation.
    Any ideas are welcome.
    Thank you - Tony

    Hi Tony,
    My guess is that putting the trashed project back has caused the problems; you can't just move them in and out of the Aperture library and expect things to be peachy. In Finder, right click the icon for the Aperture library and choose "Show package contents", and then drill down until you see all the project folders. Delete the problem project from the Aperture library, then take all the image from the trash and reimport them into a new project.
    Alternatively, restore your Aperture library using Time Machine from the point just before you deleted the project accidentally.

  • Turned on my new imac, can't get past the welcome screen

    please help me before I lose what little hair I have left.
    Got two new imacs. One install went perfectly. Second one, can't get past welcome screen. Stuck on "United States"
    Won't let me move past it. Tried rebooting while holding down shift key, didn't work, lways comes back to welcome screen. Ima screaming arggggggggg!
    product is iMac, latest version of everything, brand new out of the box, from Apple.

    Nope, this didn't help Linc.
    I finally got through to AppleCare. Turns out it was a corrupted drive, from the get-go. Never had a chance. Taking it to my nearest Apple Store in the am. to get the geeks to replace it. So young, so young, but it died a noble death. So it will soon be replaced by ImaScreaming version 2.0
    Thanks for the help though guys.

Maybe you are looking for

  • Looking for a people finder app

    I'm looking for an iPhone app (I have a 3G) that will allow me to easily send my current location to someone else via e-mail or sms (it's OK if they have to have the same app installed) so they can see where I am on a map, helping them find me. I'd u

  • Open en PDF with Acrobat X

    Double-click on a PDF used to open the file immediately in the past. Since Acrobat 9 that no longer happens. Why not? I have just double-clicked on a 14Kb file, but even now, after 5 minutes, it has not opened, although Acrobat has opened, judging fr

  • Distributing Central Contract from SRM to ECC

    Hi, We are using SRM 7.0 with ECC 6.0 in backend (no EHP). We're setting up a central contract with IDOCs. From what I read we have made the configuration: in SRM: - Assign attribute CT_PROC_TY = CCTR - Connfigure new condition type PB00 which is the

  • Captive/Internal consumption

    Hi, I want to map Captive consumption in which 1. few products are consumed internally 2. Few products are moved to other plant premise of both the plants are same but mapped as different plant in SAP. can i map point 1.  from MM side?ie. MB1B with 2

  • How can i make iphone contacts the iCloud ones

    Is there a way to make my IPHONE 5 contacts the correct ones / updated / newer on ICLOUD.COM. I´ve already deleted all ICLOUD Contacts because they were outdated and not useful. I´ve recovered my contacts from a Backup that I´ve of my IPhone and they