New Build with Operating System upgrade from ME to XP

I am going to inbark on my first system build. THe MSI K8N Neo4 Platinium is highly recommended. I am not going to do a complete rebuild. I am just going to keep my newest hardward from my old system. My old processer a P3 933mhz along with moboard is at the core of my upgrade. I noticed on the K8N page that the board does not support ME. My old system (Gateway) shipped with ME for which I purchased the XP upgrade. I understand that the XP upgrade disk has the full operating system on it and all I have to do is put the ME disk in when the XP disk asks for previous operating system. Will this board be able to recognize the ME disk so that it will pass muster with the XP upgrade disk?

Quote from: Edddd on 02-July-05, 21:15:37
Thank you both for the prompt reply, what are your thoughts about the K8N Neo4 Platinium mobo? Is it as good as Tom's Hardware says it is? I am planning on intalling an AMD Athlon 64 3700 San Diego on it. I am not a real power gamer. I just want something that will antincipate the future. My current rig, P3 933mhz has lasted me for 5 years. Thanks
The MSI K8N NEO 4 Platinum is a very stable board, has a good range of features, is highly overclockable and is just great. I think mine is great so far and I suggest you buy a decent power supply with 22A - 24A minimum on the +12V rail to make sure it lasts and worls 100% correctly.
If you need any more help just ask!

Similar Messages

I have a new macbook pro 2,6 Ghz i7, 8GB 1600Mhz internal ram. He will not boot from an external disk with operating system Snow Leopard

I have a new macbook pro 2,6Ghz i7, 8GB 1600 Mhz internal ram, but he will not boot from an external disk with operating system Snow Leopard.

These Macs shipped with 10.7, and will run nothing older than that:
MacBook Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
MacBook Pro (Retina, Mid 2012)
Jun 2012
10.7.4
11E2068
MacBook Pro (15-inch, Mid 2012)
Jun 2012
10.7.4
11E2617
MacBook Pro (13-inch, Mid 2012)
Jun 2012
10.7.4
11E2617
MacBook Pro (13-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001
MacBook Pro (15-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001
MacBook Pro (17-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.

but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck!

I have a Mac running OS X 10.4.11 with a 1.83 intel core duo what is the highest operating system upgrade that I can get?

I have a Mac running OS X 10.4.11 with a 1.83 intel core duo what is the highest operating system upgrade that I can get?

You can check to see if yours meets the system requirements for Snow Leopard - that would be the highest; Lion will not run on your machine.
Please note that the minimum 1 GB RAM is a minimum - 2 GB would be better.
http://store.apple.com/us/product/MC573Z/A
You can buy it at the Apple Store, other online resellers, or ebay (but be careful there to only bid on a new retail shrinkwrapped package to you don't get suckered into a used install disk which won't work on other machines).

Operating System Calls from APEX with Java and PL/SQL

Question about operating system calls from apex.
I created a java file which is wrapped with pl/sql like
create or replace java source named "ExternalCall" as
import java.io.*;
I do the steps from this web page http://www.oracle.com/global/de/community/tipps/oscalls/index.html
The page is in german, but for experienced users the code on this page says everything.
In apex i have an application which calls this function with the "move" command in a sql-report region.
Let's say move c:\work1\file.txt c:\work2\file.txt
Everything works fine on one host(pc) but if i want to transfer the file from my host to another one then
i get the messgage "no access" although i have read, write access on the other host.
By the way, on both hosts i have admin rights.
Why can't i transfer the file over a network ?
Thanks in advance for any kind of help.
Regards
Stefan

I guess you are working on a Windows host. In this case Oracle processes are running as Windows services with a build-in MS system account. This account has no access to network ressources. You have two ways to get out of your windows box:
Assign Oracle services a network enabled account, e.g. domain user with local administrator privileges. (I never tried this and I don't like to recommend it.)
Use a command script for copying files and use explicite authentication within this script:-
net use \\myserver\ipc$ tiger /user:scott
copy c:\temp\xxx1 \\myserver\share\temp
copy c:\temp\xxx2 \\myserver\share\temp
Michael

Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?

Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?

Go to your home screen, and then press the volume down or up button. It should say Ringer instead of volume. If it doesn't do that, try going into the clock app and try it there.

How can I install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8

Is it possible to install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8?

Is it possible to install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8?

How to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?

how to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?
I have tried with dsquery below but status is not showing there.
dsquery * -filter "(objectCategory=computer)" -attr name operatingSystem

last logon user name - not really stored (or lined) with computer object. However, you can get this info during the logon process or from the computer. Here is method:
http://portal.sivarajan.com/2010/07/user-profile-and-os-info-powershell.html
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

Can a Macbook Pro 5.5 with operating system MAC OS 10.5.8 be updated?

Can a Mac book Pro 5.5 with operating system MAC OS 10.5.8 be updated? I tried to back up an Iphone 5s and was informed that it needed a newer ITUNES software but then tried to update I TUNES software and could not because it is not compatible with MAC OS 10.5.8

A 13" 2009 machine? Sure, you can even run Mavericks (and install up to 8GB of RAM), but you'll have to upgrade to Snow Leopard (latest release was 10.6.8 - you can purchase the disc from the Apple online store -> http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard - $20 and FREE SHIPPING!!!).
After updating to Snow Leopard, then you can upgrade to Mavericks free. I don't know how much RAM you presently have, but your machine will accept up to 8GB of 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMMs RAM. I would recommend upgrading your RAM, if you haven't already, before installing Mavericks, though.
Good luck,
Clinton

Filter problem with operating system in french

Hello,
There is a problem with the "Operating System - Windows" filter in the french version of ZCC.
If you create a bundle and go into "Requirements" and add a filter with Operating system and you set it to "Version 6.1 - Windows 7 / Windows Server 2008 R2" you get this error
"Vos modifications ne peuvent pas tre appliques pour les raisons suivantes :
ErreurLa version doit tre sous la forme "x" "x.x.x.x". "
"You changes cannot be applied for the following reason : formatting must be x to x.x.x.x"
The format should be "6.1 - Windows 7 /Windows Server 2008 R2 Versions".
The filter does work as intended with the english versions of ZCC. I have no problem with that but some of our admin does.
PS : I am currently unable to open an SR because our licence has not been renewed yet. So i am reporting this here.
Thank you!

Originally Posted by GuillaumeBDEB
Hi poplante, this bug is haunting Novell since version 11.0! Believe me on that. I'm the one who reported it. Here's the workaround.
1.Go to Server machine.
On Windows:
Go to
%ZENWORKS_HOME%\resources\properties\com\novell\ze nworks\core\web\internal\resources\CoreInternal_fr .proeprties
On Linux:
Go to
/opt/novell/zenworks/resources/properties\com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.proeprties
2.change the property value of windows.versions.6.1 from "Versions 6.1 Windows 7 / Windows Server 2008 R2" to "6.1 Versions Windows 7 / Windows Server 2008R2"
3.Then Restart the server. The issue will be gone.
By the way you will see this bug reappear with every new update of ZENworks including new service packs and monthly updates. So keep this workaround at hand just in case.
Hope it helps!
GuillaumeBDEB
In 11.3 the value seems to be:
windows.versions.6.1=Versions 6.1 - Windows 7 / Windows Server 2008 R2
But should probably be set to:
windows.versions.6.1=6.1 - Versions Windows 7 / Windows Server 2008 R2
And the correct Linux path would be: /opt/novell/zenworks/resources/properties/com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.properties.
This bug would probably take them a minute or two to fix, sad to hear that it's been there since 11.
Thomas

BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0

Background:
I am relatively new to BW team and will be going through my 1st source system upgrade.
We currently have BI 7.0 SPS 17 connected to source system R/3 Enterprise EP1.
We are upgrading to the source system to ECC 6.0.
In Development and QA Environments:
we will have access to both old (R/3 Enterpirse) and the new (ECC 6.0) source systems.
We have a opportunity to compare the BW Objects, data flow and data loading from
both source systems.
In Production, however, we will just upgrade over 3 days downtime.
One Question that comes to mind in this regard...
What sort of things, we should be checking for before and after upgrade in Dev/QA and in Prod environments and what tools are available that can help the analysis and validation process ?
Some of the suggestions that were given to me include following points.
Before Upgrade:
1 Check data, taking pre images of it for testing with post upgrade.
2. Perform proper analysis of Source system related BW objects.
- A complete listing of actively used Datasources,.. etc.
3. Make delta queues empty,
Make sure that all existing deltas are loaded into BW.The last request delta must not deliver any data and must be green in the monitor.
4. Stop Process chains from BI (remove from schedule) and collection runs from R/3 side
After Upgrade:
1 After the OLTP upgrade, refer to note 458305 and other notes that are relevant to the actual upgrade
(depending on the R/3 system release / R/3 plug-in to BI plug-in compatibility).
2. Check logical system connections. Transactions SMQS, RSMO and SM59, If no access, then we can use Program RSRFCPIN_NEW for RFC Test.
3. Check and/or Activate control parameters for data transfer. SBIW ---> General Settings --->
Maintain Control Parameters for Data Transfer
http://help.sap.com/saphelp_nw70/helpdata/EN/51/85d6cf842825469a51b9a666442339/frameset.htm
4. Check for Changes to extract structures in LBWE Customizing Cockpit
- OSS Notes 328181, 396647, 380078 and 762951
5. Check if all the required transfer structures are active. See OSS Note 324520 for mass activation.
7. Check if all Source system related BW Objects are active - Transfer rules, Communication rules, update rules,DTPs,..etc.
Below is a link for some useful programs in this regard.
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=35458
6. Test all important datasources using RSA3 and check for OLTP Datasources changes .
As soon as BW notices that the time stamp at the DataSource in the OLTP is newer than the one in the transfer structure, it requests replication of the DataSource and activation of the transfer structure. Transfer the relevant DataSources only if required, and transfer only the ones that have changed (RSA5 -> Delta).
7. Create Data flow objects (trnasfer rules, infopackages, trnasformations, DTPs) for the Replicate
new/changed datasources,if needed.
8. Check all CMOD enhancements.
If we are using a customer exit with the extractor in the OLTP, see Note 393492.
7. Check for unicode (all custom programs or Function Modules for DataSources)
5. Check all the queues in RSA7, start delta runs and test data consistency.
For delta problems:In the BW system, start the 'RSSM_OLTP_INIT_DELTA_UPDATE' program for the DataSource and the source (OLTP) system for which the init selections are then transferred from BW into the ROOSPRMSC and ROOSPRMSF tables in the source system so that the delta can continue.
9. Take back up of data posted during upgrade for contingency planing.
10. Run the entire set of process chains once if possible and let it pick up no data or the usual master data.
Since we have lot of experts in this forum, who have probably gone through such scenario many times, i wanted to request you to Please Please advise if i have stated anything incorrectly or if i am missing additional steps, OSS Notes, important details...

Thanks Rav for your detailed post and very helpful contribution by posting all the information you had regarding the upgrade.
We have similar scenario -
We are upgrading our source system from 4.7 to ECC 6.0. We have our BI system with BI 7.0 at support pack 19 (SAPKW70019).
Our strategy in ECC deployment ->
In development we copied our old DEV 4.7 system DXX to new ECC system DXY (new system ID).
In production we are going to use same system PRXX upgraded from 4.7 to ECC.
Now we are in testing phase of ECC with all interfaces like BI in Dev.
My questions are below ->
How can we change/transfer mapping of all our datasources in Dev BW system BID to new ECC dev system DXY (Eg. Logical system LOGDXY0040) from Old dev system DXX (Eg. Logical system LOGDXX0040). We donot want to create new datasources or change all transfer rules/Infosources for old BW3.x solutions on our BI.
Also in new ECC sourcesystem copy we see all datasources in Red in RSA7 transaction. Do we need to initialize again all the datasources from our BW BID system.
Is there any easy way for above scenario ?
Please let me know if you have any further helpful information during your ECC 6.0 upgrade connecting to BI 7.0 system.
I have found some other links which have some pieces of information regarding the topic -
Upgrade R/3 4.6C to ECC 6.0 already in BI 7.0
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/sap-r3-migration-and-sap-bw-version-1744205
BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0
Re: ECC 6.0 Upgrade
Re: Impact of ECC 6.0 upgrade on BI/BW Environment.
ECC 5.0 to ECC 6.0 upgrade
Thanks
Prasanth

How to: execute operating system commands from PL/SQL

System: IBM pSeries AIX
Oracle: 11g Enterprise
Is there a quick way to execute operating system commands from PL/SQL?
Without creating a JAVA class....
I need to execute a Loader script.
I want to do this from within PL/SQL.
I need to to do 4 things.
Three require SQL scripts.
The fourth is SQL*Loader.
The usual way is with a UNIX script calling 3 SQL scripts and one Loader control file.
Is there way to do all this from within ONE PL/SQL SCRIPT ??
Just let me know.

Is there a quick way to execute operating system commands from PL/SQL?
NO
Without creating a JAVA class....
I need to execute a Loader script.
I want to do this from within PL/SQL.
WHY ON EARTH, such action will create a new connection and become a resource hog?
I need to to do 4 things.
Three require SQL scripts.
The fourth is SQL*Loader.
The usual way is with a UNIX script calling 3 SQL scripts and one Loader control file.
Which is perfect for the purpose.
Is there way to do all this from within ONE PL/SQL SCRIPT ??
Just let me know.
NO, there is NOT. Nor should there be. Why create unstable ineffcient Mickey Mouse systems, glued together by hacking?
Sybrand Bakker
Senior Oracle DBA

Executing a Operating System command from Stored Procedure ??

I want to execute a Operating System command from a PL/SQL Stored Procedure, can anyone suggest me how can I do this ??
I am on Sun-Solaris with Oracle 8.1.7 database.
Please do email me at [email protected]
Thanks in Advance,
Ramesh L.

Are you using a webserver? If so, you could make your operating system script into a CGI program, then execute it from pl/sql using utl_http.request.

Calling Operating System Commands from PL/SQL using java

Calling Operating System Commands from PL/SQL - The Java Way
wlth help of given thread link,
Calling OS Commands from Plsql
but i had user privilege problem
Declare
x Varchar2(2000);
Begin
x := OSCommand_Run('/tmp/sri/GROUP_ho.sh');
DBMS_OUTPUT.Put_Line(x);
End;
o/p;
can't exec: /tmp/sri/GROUP_ho.sh lacks user privilege
i done the grant privillage also
part
dbms_java.grant_permission('abcd', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
dbms_java.grant_permission('abcd', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission('
abcd', 'SYS:java.io.FilePermission','<<ALL FILES>>', 'execute');
again
get
can't exec: /tmp/sri/GROUP_ho.sh lacks user privilege
same error;

Process management at the OS level should prevent execution continuing in the calling code until the command has completed (either successfully or with error).
If the low level java code were to spawn child process threads then execution could continue, but I'm guessing the Java function your talking about doesn't do that and just calls the operating system to execute the command and waits for the returning code to come back.

New Build with Operating System upgrade from ME to XP

Similar Messages

Maybe you are looking for