New button Users SearchScope

Hello,
I created a search scope for active users, and I also created a navigation bar to be redirected to this searchscope but i don't have the new and delete button ?
Is someone has any idea ?
Regards

Does user (you are logged as) have access to create, delete users?
If you go to all users, do you see New and Delete??
Try with administrator, first.
Nosh Mernacaj, Identity Management Specialist

Similar Messages

The new ribbon user interface in Win 8.1 should display appropriate buttons depending on the currently displayed folder within the explorer.exe window.

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

Standard New button for creation of bp is not appeared in ic agent bp role's main page.

I have checked in.htm page of ICCMP_BP_MUL_S/BuPaSearchB2B which is getting called in web.
in line no. 45 of .htm page there is condition to check whether new button should be displayed or not, when this condition is true no_bp_create is initial then only new button appears in ic agent.
I have debugged so many times but unable to find out from where no_bp_create flag is populated and in conclusion new button is not appeared .
I think there is some authorization which should be assigned to user for creation of bp so that above said flag (no_bp_create) is not getting populated.
if i am on right track so please let me know which authorization is to be assigned to user so that user can see new button in ic_agent.

Hi Sunny,
The parameter no_bp_create is being set in the do_init_context method of the view controller class of same view but the value is being fetched using a badi.
The authorization to create BP can be enabled by implementing the BADI BADI_CRM_BP_UIU_AUTHORITY (or enhancement spot CRM_UIU_BP_ENHANCEMENT).
Users can be authorized to create/edit data for different UI components using this badi.
In this badi put the condition for the application name may be as (based on your scenario or explore more) cl_crm_ic_bp_constants=>gc_bp_create OR OR cl_crm_ic_bp_constants=>gc_bp_edit and set the value of parameter cv_not_allowed = abap_false. Then you should be able to see the New button.
Regards,
Shobhit

New iPhone user needs guidance setting up 4 iPhones for family - best approach?

Hi - I'm a new iPhone user tasked with setting up 4 iPhones for family (three 4S, one 3GS). I set up the first 4S using my mother's existing Apple ID (she has an iPad) and I think (hope) hers is fine. When I set up my father's phone, my sister said to enter my mother's Apple ID during setup since they wanted to use a single Apple ID for iTunes purchases. The setup screen I'm referring to the 7th screen into the setup process for a new iPhone 4S (after the Welcome, Language, Country/Region, Location Services, Wi-Fi Networks, and Set Up iPhone screens), where it asks you to "Sign In with an Apple ID" or "Create a Free Apple ID". This screen was where I entered my mother's Apple ID into my father's phone.
By entering my mother's Apple ID on my father's phone at this point during setup, I seem to have created a "clone" of her phone - their phone numbers are distinct and they can call each other but iMessages sent to either of them initially appeared on BOTH phones. I think I have now fixed that by creating a separate Apple ID for my father after the fact and entering it under Settings>Messages. Thinking I could also enter his new Apple ID under Settings>iCloud, I found I could not change it from my mother's Apple ID (it's greyed out). I saw a recommendation in another post to click on the red "Delete Account" button at the bottom, but will that delete my mother's entire account or only its association with my father's phone?
Backing up a step or two, I'm worried that at this point I should have entered/created a new Apple ID on screen #7 during initial setup of my father's phone (instead of entering my mother's Apple ID), and that just changing settings in iMessage, iCloud, etc. won't really fix any problem(s) I've created. I hesitate to set up the other two phones before knowing how badly I've already messed things up with this one.
During the initial set up of my father's iPhone, should I have created/entered his own unique Apple ID on screen #7 instead of entering my mother's Apple ID? (and then on his phone AFTER setup was complete, changing to my mother's Apple ID under Settings>Store so that all purchases are shared)?
If yes, do I need to restore his phone to factory settings and set it up as a new phone so his phone behaves like his and not a clone of hers?
Without knowing what might be the best way to set up these 4 new iPhones, I was thinking the four unique users of these new phones would most likely want to share apps (by purchasing them with one Apple ID), backup/synch to one computer, but maintain separate iCloud accounts so everyone's info is private? I've spent time reading other posts and see so many different recommendations for families with multiple devices that my head is spinning. Many include questions from folks migrating from older phones or MobileMe. I think my situation is simpler in that there are 4 new iphones and one existing Apple ID. Have I missed some comprehensive post that clarifies the best way to set things up for families new to iPhones, or do needs vary so much that no single best way exists? Given my situation (and depending on which way I should proceed regarding having set up my father's phone with my mother's Apple ID), should I create/enter a separate Apple ID for each new phone user during initial setup so each phone is distinct from the others, and AFTER setup is complete, changing the iTunes and Store info to the shared Apple Id for purchases? Or can I customize each individual phone after the fact in Settings>Whatever so that even if I've entered the same Apple ID on Screen #7 during initial new phone setup, the 4 phones will ultimately be set up correctly?
So sorry to have to ask such basic questions. Many thanks, in advance, for any guidance provided to help me not make any (more?) mistakes during setup that will be a real headache to remedy later, once everyone has started using their phones.

Hi edgefield,sorry you're having so much trouble.
FIRST CREATE A BACKUP ON YOUR COMPUTER -ALWAYS BEFORE PLAYING WITH THE INFORMATION ON THE PHONES (it prevents losses)
Now I'll answer your questions)
During the initial set up of my father's iPhone, should I have created/entered his own unique Apple ID on screen #7 instead of entering my mother's Apple ID? (and then on his phone AFTER setup was complete, changing to my mother's Apple ID under Settings>Store so that all purchases are shared)?
Yes. Create his own apple id and sign him in. then tap settings ->store -> tap on the account name -> sign out.
Then sign in your fathers apple id. (create your fathers apple id on the computer, its much easier, trust me).
If yes, do I need to restore his phone to factory settings and set it up as a new phone so his phone behaves like his and not a clone of hers?##
No. Tap settings -> icloud, and turn everything off (keep on the phone option). Then DELETE ACCOUNT (it's got red around it and at the bottom of the screen if you scroll down). You cannot sign out of iCloud, you can only delete the account. Then clean up the contacts and information on the phone.
Then you tap settings -> iCloud and sign in. Put your fathers apple id in the section. His information will be uploaded to www.icloud.com. Then go to www.icloud.com and sign in with his apple id. Make sure his information is uploaded (you'll have to select timezone and such).
From that point you are fine except for iMessage.
For iMessage to function properly, only one apple id can be signed into the iTunes store (settings -> store). If they are both signed into the same apple id on the iTunes store, than you need to turn off iMessage on one of the phones. The iMessage may be delievered to either phone when both are signed in under the same apple id in the iTunes store.
tap settings -> messages -> imessage off
This also disables facetime. If you want them to have iMessage and Facetime, they have to have seperate apple id's signed into the iTunes store.
Have I missed some comprehensive post that clarifies the best way to set things up for families new to iPhones, or do needs vary so much that no single best way exists?
Not that I've seen, will consider creating one if I have time.
Given my situation (and depending on which way I should proceed regarding having set up my father's phone with my mother's Apple ID), should I create/enter a separate Apple ID for each new phone user during initial setup so each phone is distinct from the others, and AFTER setup is complete, changing the iTunes and Store info to the shared Apple Id for purchases?
Your best bet is to create each apple id on the computer (keyboards are easier to use) and then sign them each in during the creation process. Then change the iTunes store info to the stored apple id.
This will allow each person to serpate iClouds without interfering with each others Cloud as you set up new devices.
Or can I customize each individual phone after the fact in Settings>Whatever so that even if I've entered the same Apple ID on Screen #7 during initial new phone setup, the 4 phones will ultimately be set up correctly?
Doing it this way can cause problems (or used to, not sure if it still does), initially, when you set it up, it wants to create a backup or upload the blank info to iCloud. You are better off setting up their own apple id first and signing in with that, and then changing it in the iTunes store.
I'm off to bed, I'll check this thread tomorrow and see if you have any more questions/problems. Remember, always create a back-up before you do anything.

How to add a new button in IC tool bar and handle the event for the button?

Hi,
    I am working on CRM 2007 Interaction center. To add a new button to IC toolbar, customizing is available to define a new button and then assign in to the profile.
In SPRO->CRM->IC webclient->Customer Specifc System Modifications->Define Toolbar Buttons, I defined one new button with ID ZSTART.
Now in SPRO->CRM->IC webclient->Basic Functions->Communication Channels->Define Toolbar Profiles , I selected Default profileid and in Generic Layout Buttons Tab, I added the new button ZSTART in Position 3.
     So after completing the customizing when the user logs in using role IC_AGENT, the button (with ID:ZSTART) gets displayed in the IC toolbar too.
      Now on click of this button, I need to create an object.
To do so, I have to catch the event which is raised by this new button.
       Please let me how to implement the event handler for this new button. What will be the event name for this button click event and how I can subscribe for it ?
     Please let me know if anyone of you have already worked on similar requirements.
Regards,
Manas.
Edited by: manas sahoo on Jul 22, 2008 7:49 PM

Hello Manas,
There are a couple of threads in the community that might help you out (if you haven't already found them):
Re: IC Web Client Toolbar
/message/3621917#3621917 [original link is broken]
Regards,
Renee Wilhelm
Edited by: Renee Wilhelm on Nov 6, 2008 7:46 PM

How can i create a new Adminstrator user account ?

How can i create a new Adminstrator user account ?

Go to the System Preferences>Users.
Click the lock if and enter your password, if necessary.
Then click on the "+" symbol below the accounts list.
From the "New Account" menu, select"Administrator" and fill in the rest of the information.
And finally click the "Create Account" button.
Done. A new Administrator user account.

Create a new button in Financial Planning of the bucket

Dear experts,
We need to create a new button in the bucket financial information in order to when a user click on it, a report is executed, Does anyone know the steps needed to create the button and be showed in the bucket financial information?
Thanks,
Sara

Hi Amit,
Thank you ver much for your help. I tried this option and it works. The problem is this button is already configured at item level and we have no idea where is configured . We would like to retrieve it to copy in the bucket.
It is not configured in the launchpad and it is not configured in the webdynpro, if it is not there where can be configured/developed?
Is there any list of all buttons of the system?
Thanks again for your help,
Sara

DVDSP3 Won't Make New Buttons, Won't Open Project Files

HELP!!!!
The button editor in my DVDSP 3.02 stopped working after it opens a new project file. I mean, when you go to a menu and then hold down the mouse button and drag, nothing happens. It will not create any new buttons. Even if you drag a button template over and use the pop-up submenu. It will not create any buttons.
Worse is what happens when I open an existing project file. Then it stalls forever at the "Loading Menus" point in the "Loading Project" dialog. It doesn't crash, it just stalls there forever. However, if I click "cancel" - THEN the app crashes.
But it won't make buttons in the new project files it can open, and it won't open any existing project files. Very confusing.
Here's what I know and have done to this point...
If I watch this whole process in the Activity Monitor, here's what I see. I find that two apps named "DSPX_AEncoderServer" and "DSPX_EncoderServer" get hung (and turn red) when the "Loading menus" point is reached in the document load. Sometimes DVDSP will say it's hung, too, but not always.
However, I found that my DVDSP app still runs flawlessly if I boot from my "clone" backup drive, which is how I'm still able to get work done currently.
Back on my normal boot drive, all of the other Apple Pro apps still run perfectly - FCP, Compressor, A-Pack, etc. But not DVDSP.
OK, here's a clue, but I don't know what it means. Two months ago, I had the logic board replaced on my G4. All the pro apps made me re-register. Then this DVDSP problem appeared out of the blue. Nothing fixed it that I could find. What made it finally go away was the timely arrival of a new Security Update to the OS via "Software Update." Installing that made the problem with DVDSP go away, for good.
Not doing hard drive maintenance, repairing privleges, fully optimizing OS, Disk Warrrior, Norton DiskDoctor - none of them worked. But that Security Update showing up, installing, and then doing the post-install optimize fixed the problem. That time. Or maybe it didn't? Because...
Two weeks ago the FW ports on the "new" logic board blew, just like the original, so AppleCare gave me a third logic board.
Same deal as before with all the pro apps wanting to re-register because they are seeing a different serial number in firmware.
Also, just like before, I have this trouble with DVDSP. But I can't fix it this time.
In the past three days (two of which were really one "large" day with no sleep period in between) here's what I have done in an attempt to fix this, without success.
I dumped the receipts for the DVDSP v3 installs and upgrades, then I reinstalled the DVDSP components from my original disc, and then reinstalled the online 3.02 upgrade. No go.
I did all of the above, except this time I found an Apple TechNote on deinstalling DVDSP v2. So using that as a guide I did my best to delete the app and all its supporting files, as well as the install receipts, before doing a fresh install of the app and the v3.02 upgrade. No go.
I did a plethora of hard drive and system maintenance thinking that perhaps some files had been misplaced, a hard drive directory corrupted, a bundle bit here or there un-set, a few system libraries de-optimized, various font and system caches corrupted, as well as numerous log files too filled up with "essential" data to run correctly therefore in need of deletion.
Along with anything else I could think of based on my 20+ years of supporting Macs in a production environment. Again, no go.
So I deleted all the DVDSP files and receipts from my boot drive again. Then I dumped all the install receipts for OS 10.3.9 and ran the "combo" version installer for that OS upgrade. Next I dumped the receipts for the Security Updates and reinstalled those. Then I did drive maintenance, OS permission fixing and optimizing. Then reinstalled DVDSP and friends. Still no go.
But my version of the app that is on my backup hard drive that I cloned right before taking the Mac to the shop for the 3rd logic board still runs just fine. I boot off that drive (connected via Firewire) and DVDSP will run fine.
I'm confused.
Now I'm not inclined to spend a lot more time on this since my DVDSP 4 upgrade is due for delivery any day now, and I'm sure that will work OK. Especially since I'm planning on moving to Tiger at that point, too.
But in the meantime, it sure would be nice to know what happened to my "regular" copy of DVDSP.
Can anyone figure this out, or at least give me some new ideas on now to troubleshoot this?
Apple Support refuses to help me because I'm still using an "unsupported" version of DVDSP. Even though I'm still using it because my purchased upgrade is being delivered via "media mail" - the US Postal Service's version of the proverbial "Slow Boat."
That was a difficult and frustrating conversation withthe Apple Support rep, too, let me tell you. I've been a fan, user, customer, supporter, and evangelist for Apple hardware and software since 1984. But when that voice on the other end of the phone essentially told me that...
a) if I was not using the latest and greatest version of the software, AND...
b) if I was not willing to spend several hundred dollars each year on support fees...
...then I was basically on my own and they would not help me. Worse, they didn't care that I was an old and loyal customer, or that I was even a stockholder in the company. The support system essentially told me to get stuffed. Yee-e-e-ow!!!!
I was especially mad about this because I have this nagging suspicion that this whole problem I'm having with DVDSP is somehow related to some kind of copy protection scheme that Apple has going on but doesn't talk about.
I mean why did I need to re-enter the serial numbers for all my pro apps when I changed logic boards? Is my problem being caused by some Pro App component that knows enough to stop working when it thinks it's been bootlegged, but doesn't know enough to trigger a re-registration of itself.
At this point, that idea is beginning to sound more and more plausible as the cause of my trouble.
Anyway, this problem is seriously hurting my workflow. I'm out of ideas and I need some guidance from the collected wisdom of the forum to solve this problem.
Thanks in advance.

I didn't see anywhere that you had downloaded and
installed the latest proApplication Support file. If
you haven't, you should do this next:
http://www.apple.com/support/downloads/proapplications
upport31macosx1039.html
Hal:
I had reinstalled that ProApps Support version, but I hadn't done it since I deleted all the app files and such, then done a complete reinstall from the DVD.
So I just downloaded it afresh, and then installed it. Then I restarted, and then repaired permissions with Disk Utility.
Still no go.
I'm bamboozled. I thought I knew something about this stuff, but I guess it's good to stay humble.
However, my 5.1 studio upgrade just arrived in today's mail. I think I'm going to take a chance. I'm between projects right now. So I'm going to upgrade my OS to Tiger>then 10.4.6 upd. Then I'll take a shot at installing the new FCP Studio upgrade and see what happens.
Any comments or advice? Otherwise, wish me luck. I'll let you know how this works out with a post here.
Sure wish I could figure out what's going on with my DVDSP v3, though. I really HATE to leave unresolved problems hanging out there. Seems like they always come back to bite you again if you don't deal with them.
Thanks for the help.

Adding a new button in the PO search summary in SRM 3

Hello gurus,
my requirement is to add a new button in the search summary for PO in SRM. Here's the task: every time a search is executed, the result is a list of purchase orders and every item has on the left two icons, "Show PO" and "Modify PO". There are merely a shortcut that brings the user to the PO screen in which the document is shown/can be modified.
These two buttons are standard... my task is to add a new button in the template, "Copy PO", which should be a shortcut to the omonimous button which is present in the PO view screen. So I think this new button should work as the two standard ones.
In order to do so, I looked into the proper template: SAPLBBP_PDH_SEARCH, screen 3003, which belongs to the package BBP_PRODOC_C (ITS service BBPSEARCH).
I tried to "duplicate" the part referring to a standard button (e.g. the "display icon" chunk), obtaining a new chunk which represents the new button in the template.
And... it works, in the sense that the button is visible and clickable. So far so good. Here's the questions since I'm not absolutely an expert on Jscript... My button, once clicked, triggers my FORM (PO_COPY) which should receive the header GUID of the Puchase Order.
In debug I've seen that the form fails since it does not receive any parameter, and that's probably related to this section:
(angle brackets omitted, it gave me an error posting tags in sdn)
"JavaScript:HyperSubmit('PO_COPY', '`MAINLIST-LINE_NUMBER[j].value`')"
The problem is I did not understand how to check for possible parameters of this HyperSubmit method. Also, I'd like to check what's the structure of MAINLIST (as far as I've seen, MAINLIST-LINE_NUMBER[j].value is a parameter passed to the form) but don't know how to see that. Can anyone please direct me through these passages? Thanks in advance.

Hi Matteo Montalto,
Please let me know how you added new button.
Regards,
neelima

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
Greetings
*update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

[Question] New Button from Toolbar which creates a new Outlook Mail?

Hello together,
I am faced with an issue by using a button from the toolbar in order to create a new outlook mail.
Do you know the functionality from html?
href="mailto:email@email?subject=CRM%20Feedback&body=Bereich%20(z.B.%20Opportunity%....
This coding will create a new outlook mail an fills it with information when the user click this link. It is also possible to implement it via a button.
Now, I want to implement these function in my component, escpecially in the toolbar.
I have created a new button, but how can I provide it? Is there a possibility at all?
Thanks!
Regards,
Marcus
Edited by: Marcus Findeisen on Mar 8, 2011 4:55 PM

Just define the following coding for your button...
    ls_button-text     = 'Outlook mail'.
    ls_button-tooltip = 'Outlook mail'.
    ls_button-on_client_click = 'javascript:window.open ("mailto:email@email?subject=CRM","mywindow1","width=100,height=100,scrollbars=no,menubar=no");'.
    ls_button-page_id = me->component_id.
    ls_button-enabled = abap_true.
    APPEND ls_button TO rt_buttons.
    CLEAR ls_button.

Export internal table to Excel file pressing a new button created in ALV

Hello, I am trying to implement the functionality to export to excel file inside a button that i have created into my ALV. I don't want to use FileDownload UI.
The code I have set for event handler of this button is the following:
METHOD attach_files .
TYPES:
    BEGIN OF tipo_alv_tab,
      tipod    TYPE objid,
      descd   TYPE p1000-stext,
      begda   TYPE begdatum,
      endda   TYPE enddatum,
      pernr     TYPE pernr_d,
      nombre TYPE ad_namefir,
      email     TYPE ad_smtpadr,
      posicion TYPE p1000-stext,
      uodesc   TYPE p1000-stext,
    END OF tipo_alv_tab.
DATA:
    i_alv_tab    TYPE TABLE OF tipo_alv_tab,
    conv_out     TYPE REF TO cl_abap_conv_out_ce,
    content      TYPE xstring,
    lv_filename TYPE string,
    xml_out      TYPE string.
Fill values from memory
IMPORT name1 TO i_alv_tab FROM MEMORY ID 'ZCA'.
Build XML file with internal table information
CALL TRANSFORMATION ('ID') SOURCE tab = i_alv_tab[] RESULT XML xml_out.
Build XSTRING with XML
CALL FUNCTION 'CRM_IC_XML_STRING2XSTRING'
    EXPORTING
      instring   = xml_out
    IMPORTING
      outxstring = content.
Format XSTRING
conv_out = cl_abap_conv_out_ce=>create( encoding = 'UTF-8' ).
Convert data
conv_out->convert( EXPORTING data = xml_out IMPORTING buffer = content ).
Save file
CALL METHOD cl_wd_runtime_services=>attach_file_to_response
    EXPORTING
      i_filename      = 'Excel File.xls'
      i_content       = content
      i_mime_type     = 'application/msexcel'
      i_in_new_window = i_in_new_window
      i_inplace       = i_inplace.
ENDMETHOD.
When pressing the button, the file created is without extension, and with a rare name. When trying to open the file, it seems to be corrupted.
Does anyone know what am I doing wrong???
Please, help is really really appreciated!!!!

Hi Jorge,
The export data to excel functionality is available inbuilt in ALV and you dont have to write any implementation. However, if you want to create your own button for it, you can do so as below.
data:
lr_button type ref to cl_salv_wd_fe_button,
lr_function type ref to cl_salv_wd_function.
CREATE OBJECT lr_button.
lr_button->set_text( 'Export to excel' ).
lr_button->set_tooltip( 'Export data to excel' ).
lr_function = l_alv_model->if_salv_wd_function_settings~create_function( id = 'EXCEL' ).
lr_function->set_function_std( IF_SALV_WD_C_STD_FUNCTIONS=>EXPORT_EXCEL ).
lr_function->set_editor( lr_button ).
Now, you have created your own button, created a user defined function for the ALV and set this button as editor for the function. And using the set_function_std method, we have just mapped the functionality of your new button to the existing export to excel functionality in ALV.
Hope this is what you are looking for.
Regards
Nithya

A new button required on shoppingcart screen

Hi all,
I need a new button on the shopping cart screen, so that an interactive form can be submitted to the user. I have gone through the BAdI ( BBP_SC_MODIFY_UI ). It does not look to me that it can be used for additional buttons. Please advice.
Thanks.

Hello Mohammad,
I'm not sure what kind of interactive form you need to call. If the interactive form is like HTML form, catalog interface has option called "E-Form" which give you option to pass values to Shopping Cart by BBP_CAT_CALL_ENRICH BADI.
There is Business Card sample "BBP_BUSINESSCARDS".
Regards,
Masa

New Button not appearing in Choose company screen

Hi All,
Today at one of our customer we found that when we goto choose company screen with user with super user authorisation, New button (used to create new company) doesn't appear.
Customer uses SAP B1 2007 B Patch Level 08
Does anybody has idea what could be the reason for this ?
BR
Samir Gandhi

Hai!
Is this issue in Client Machine or in server?
This is because of corruption of client installation in SERVER OR CLIENT Machine.
Uninstall the Client in SERVER or CLIENT Machine and Reinstall using Upgrade exe in SERVER or Client setup in B1SHR for CLIENT Machine.
While reinstalling, choose Different path and install.
Take Neccessary Backups..
Regards,
Thanga Raj.K

New button Users SearchScope

Similar Messages

Maybe you are looking for