New c4680 photo smart all in one printer. won't pick up paper to pull into printer.

HP C4680 Photo Smart All in One Printer.
Just out of box. At point in set up to print "allignment" page, but printer won't pull paper in. Goes thru the motions, but
won't pick it up. Something not working right in paper feed mechanism. Any suggestions/solutions?

Hi there @dhengr!
Thanks for contacting the HP Forums!
I can see your having a print quality issue with your HP OfficeJet 6310. I should be able to provide documentation that will help locate a resolution. You mentioned you have already tried another HP95 tri-color cartridge with no resolution. I also noticed you said that the quality report from the printer also has no color ink.
If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer. I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer. If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone. They deal with hardware warranty and replacement options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend and thank you again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Similar Messages

Can't scan from brand-new HP PSC 1600 all-in-one printer/scanner/copier

Just installed this new all-in-one, and the printer and copier work perfectly. But when I try to scan, it won't do anything. Error message says to configure a "scan destination." But the menu to do so, on the desktop, won't open at all. Just stalls and stalls. Everything else seems to work fine, so no connection problems. Anybody know how to shake this menu loose?
iMac G3, iBook G3 Mac OS X (10.3.9)

I've been using the HP psc 1210v for about a year now, and I've always been able to print, but scanning (which I do very infrequently) has always been a problem. Typically, to use the scanner, I have to remove the printer and re-install with the latest drivers from HP's (currently 7.7.2).
So, after doing this again, I was able to scan a couple of images by using the "HP Device Manager". I just double-click on "Scan Picture", which opens the "HP Scan" application, and I can choose from there how to scan; either opening in another Application or Save to File.
I'm using 10.4.6, but I know I originally scanned some images using this printer in 10.3.9. Hopefully this will continue to work!
Mac mini G4 Mac OS X (10.4.6)

Changing ink cartridge in my new Envy 5530 e-all in one printer

Just bought a new Envy printer. I feel stupid but I don't know how to open it to replace the ink cartridge. The manual that came with it does not show this.

Hi,
Please use the following manual, pp 46-47 will show you how to replace ink cartridges (and how to install new ink cartridges):
http://h10032.www1.hp.com/ctg/Manual/c03773204.pdf
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installing software for MAC 0S X 106.8 and ENVY 7645 all in one printer

Is there a way to download software so that my MAC OS X 10.6.8 and work with my new HP ENVY 7645 all-in-one printer?
If so, please tell me how to do that? Thanks!

Hi,
I afraid not.
The printer is only supported on 10.7 or newer OS versions, as listed within the System Requirements below:
http://support.hp.com/us-en/document/c04353671/
If your Mac support Yosemite you may upgrade your operating system to 10.10 for free:
https://www.apple.com/osx/how-to-upgrade/?
The other option os to replace the printer with another model which is compatible with your operating system.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos.

What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos. Using USB connection.

That's a difficult one but I'd always go for HP as they make so many excellent models that you'll always be able to buy the cartridges from almost anyone. Theyre darn good printer too. I have four in the office here and one of them is a very neat flatbed with exceptionally high tonal qualities. One of their cheaper models is the HP 5520 A4 inkjet all-in-one - CMYK. Good value at £70 and 4800 x 1200 DPI.

HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ? Loooking for any answers ! Thank Yopu ,JS

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Looking to Buy a New All-In-One Printer

I am looking to buy a new all-in-one Printer.
I have been using the Epson RX620 for a little over a year and have had great print results. Unfortunately I get a warning message yesterday that the printer needs servicing and nothing will work. After getting much less than desirable results from their Customer Support I am moving away from Epson, after three different Epson printers.
I have heard many good things about Canon printers. We will be printing bunches and bunches of photos(two small daughters + graphic artist wife = many, many photos). I am presently looking at the Canon MP600. Any goods or bads about said printer?
We do want a printer that can use cheap cartridges so HP is out of the question. Any other recommendations is appreciated.
Thanks in advance for your replies.
Nick

The only thing that ****** me off about Epson is that they shut down their toll free phone tech support!
I had to rely on their email support to set up my new Epson printer (CD/DVD loading tray) which wasn't so bad as it was very detailed & hands on. I just couldn't understand their manual. I was having one of my "senior moment" days.
Those Canon printers are handsome! I almost ended up getting one. But, the Epson printers won because they are the only ones who can print directly on CD/DVDs & all the software is included.

Installed a new harddrive in my macbook pro. cannot connect to hp photosmart all in one printer!!

I, recently, installed a new hard drive on my MacBook Pro Laptop Computer (2007 model).
Now, I cannot print out anything on my HP Photosmart C7180 All-In-One Printer! They don't
seem to be connected, as the printer icon shows up on my computer, and then, immediately, evaporates
into thin air.
How do I connect my HP Printer to my laptop, now that I have a new harddrive installed?

Hello Lady22:
When you received your printer you should have received two insulation disks one is for Windows computers and the other one is for Mac ( Apple Computer) If you have the disks please install Mac disk. Apple computers do search and down load the parcel software so you can do basic printing commands. You need to find the program that is some where in your computer that allows you to hook up Pinters and Devices. Ounce you find this open it up then connect the printer cable to the lap top. The computer program will list HP's printers yuo need to select your printers model number. Then it will down load the drivers for it to run basic commands. Ounce they are download run a test to make sure it is working right. Contact HP's store and asked them to send you a new set of insulation disk. Your old disk may have fine dust film on them. Clean them off pior to inserting them If you use glass cleaner and fine cloth make sure they are dry off before you insert them. If you used them before maybe a speck of dirt blocked out parcel program that caused it not to install correctly . frrw

HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

HP OfficeJet 6310 All-In-One printer on a iMAC OSX version 10.9.5 system
Hello,
As I don't print in color much but had need to I discovered my printer not printing in color. I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled). The printer still won't print color but it advances the paper as if it was printing - just no ink on paper. I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities. The test page print does not show color either. I have no error messages. Don't know what else to do.
thanks
DH

Hi there @dhengr!
Thanks for contacting the HP Forums!
I can see your having a print quality issue with your HP OfficeJet 6310. I should be able to provide documentation that will help locate a resolution. You mentioned you have already tried another HP95 tri-color cartridge with no resolution. I also noticed you said that the quality report from the printer also has no color ink.
If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer. I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer. If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone. They deal with hardware warranty and replacement options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend and thank you again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

What is the best photo paper 4'x6' for HP Officejet Pro 8500A Plus e-All-in-one Printer?

1.-HP Officejet Pro 8500A Plus e-All-in-One Printer
2.-OS: Windows 7-64
3.-No error messages
4.-No changes have been made
5.-I have been printing in my with old "hp premium plus glossyphoto paper" and getting very dark photos and too much wasted ink .
I've been using "hp premium plus glossy photo paper" and getting very dark photos.
Before this printer I used a Deskjet 5550 with the same paper and getting great quality.
Thank you. Luis Cuenca
This question was solved.
View Solution.

HI cuencaky,
Here is a link to a page with an example of good 4 X 6 photo paper you can use with your printer.
This type of paper is known to work very well.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

HP 7520 all in one printer does not print photos well-Does with my Windows machines

I have several computers. Everything works great with printer in Windows environment. I have an iPad and a MACbook PRO with Maverick 10.9.4. The photos are terrible when I print with either of these devices. It almost looks like a negative image. I have checked for updated drivers, etc for the MAC. The ink is HP and the levels are good. It works fine with my PC computers, but not my Apple devices. I have checked system preverences in the APPLE. It appears to be only the photographs. Text prints fine. Any suggestions?
This question was solved.
View Solution.

Hello cpsimon, and welcome to the HP Forums, I hope you enjoy your experience!
I see you're running into photo print issues. I would like to help!
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps.
After the updates, I would recommend reinstalling the HP Photosmart 7520 e-All-in-One Printer Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP C4680 all in one printer out of alignement when printing avery business cards.

I recently purchased an HP C4680 all in one printer and have found
that it will not print Avery clean edge C32028-25 business cards. It
prints ok on plain paper and when you compare against the business card
sheet everything is in the correct position. However when you print the
actual cards the printed area creeps up the page and some of the print
is off the cards ruining the sheet. I am using avery design pro
software version 5. The print preview shows the printing area correctly.
Please advise of a fix for this issue.

I have the same problem with my HP Officejet Pro 8000 using Avery business cards. I don't think HP knows how to fix the problem. I was told by HP to select card stock as my paper type, but that is not on my menu. I may have to adjust my PageMaker template to counter the creep. You would think that this would be an adustment that could be made in the software. It amounts to 1/8" over the whole page. I don't plan on much help from HP since I have not received any help in the past.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error stating please insert black ink cartridge.
Please Help

Make sure it is a genuine HP cartridge. Take it out and clean the contact on the cartridge and in the printer. Try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My hp all in one printer will not link to my new router.

I have a hp all in one printer deskjet 3510 model and i just got a new belkin N600 router and they will not link for wireless printing. The printer just times out when I try to get them to link. I use the push button setup because thats what i have. How can i get them to link. I had no problem with my old router it was a linksys.

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to connect my hp all in one printer to a new wifi hub?

i have a printer all in one and its abiut 3 years old ! we desperately need to print off some documents but are rrally struggleing. we have not used the printer for a long time and since the last use we have got a new wifi hub and new computers all of which are windows 8! i have 2 questions firstly the most important being - can you setup a hp all in one printer onto a windows 8 laptop? and secondly how do we connect our printer to a new wifi hub?
if it is possible to setup the printer onto a windows 8 pc how do we do it?
thanks, lucy

Please provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) -
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns.
If wireless, status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

New c4680 photo smart all in one printer. won't pick up paper to pull into printer.

Similar Messages

Maybe you are looking for