New cartridge installed and no ink flow

I changed my black cartridge when the print faded away (many many pages after the warning).  Now the printer will not print black.  I tried clicking the "align printer" option in the hope that would get the ink flowing since there appeared to be no other option available.  The black print was good on the first 2 pages of a 20 page document.  Unfortunately I was not closely watching for a fade out.  When the printer started warning me of low ink, I started watching.  But that was a LONG time ago.  I have done lots of printing since then and got a bit lax.  How do I get the ink flowing again?

Please review this post and then post more details.  What printer model?
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • HP Officejet Pro 8500 A910 - all new ink cartridges​, black and blue ink not printing?

    HP Officejet Pro 8500 A910 - all new ink cartridges, black and cyan ink not printing?
    Cleaned printer heads w/no luck.

    Welcome to the forums @corAtrum1 ,
    I read your post about your Officejet 8500 no longer printing in black and cyan ink. I would recommend that you try out the steps in the guide below for this problem.
    I hope this helps!
    Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Hp3050 makes dirty marks on the pages. new cartridge installed as well, but still doing the same.

    HP3050 All-in-one
    Copier makes dirty marks on the pages. New cartridge installed as well, but still doing the same. When printing, it is fine and clear. Any page copied has the long stripes. Please advice

    I have the same problem. Please help.

  • My hard drive crashed on my macbook pro and I had a new one installed and they were unable to get my pictures off of it. Is there anyone who could help? I'm going to lose all my memories of my kids! I got my old hard drive

    My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?

    I think how you understand the value of having backups. All you can do is:
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.
    You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers.

  • I just recently had a new hardrive installed and now i cant transfer my data

    I just recently had a new harddrive installed and I cant seem to start it up properly

    What exacty happnes when you try to startup?
    Wha installed the HD?
    What model MacBook Pro?
    It it has Internet Recovery then boot into Recovey
    OS X: About OS X Recovery
    There you can use disk utility and reinstall the OS. Otherwise y owill have to boot for an Install Disk
    BTW, this is the Mac Pro Desktop forum

  • HP photo B210a not printing black ink with a new cartridge installed

    The color cartridges print when I clean the heads, etc. but the black cartridge will not print.  It did fine, it ran out of ink, so, I replaced the cartridge with new ink, the same HP ink I always use.  I thought it was the cartridge, do, I bought another one, and it too did not print. After several times cleaning, aligning, removing and reinserting, to no avail did it print black.  What gives?  What do I need to do to correct this situation. It is an HP all-in-one inkjet printer, B210a.  It is only 1.5 years old and not used that much. 
    Thanks,
    Bonnie

    What can i do to get this new cartridge to work.  Very frustrating
    Dan Page
    Hawaii

  • New Cartridge installed - Cartridge problem error message recieved

    I have purchased new ink for my printer and once installed recieved the error msg that there was a "Cartridge Problem" and one of the cartridge's was damaged so I exchanged for new and recieved the same error msg. I followed the trouble shooting: cleaned the contact points, removed and reinstalled, unplugged and restarted...all several times and nothing has helped. I am becoming increasingly frustrated. Please advise!

    Hi Morgan
    Thank you for your patience. Can I ask you to confirm that you have the correct cartridge for your printer and region.
    http://store.hp.com/webapp/wcs/stores/servlet/us/e​n/cat/ink--toner---paper
    The correct cartridges vary by region and printer model. The above link is for the US. I have to go off line for an hour but will check back.
    Regards
    Ken
    I am an HP employee
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolves your problem please mark it as an Accepted Solution :-)

  • In 3210xi, new cartridges installed, but yellow not recognized

    3210xi will not recognize new yellow cartridge.  All cartridges are new HP cartridges, but yellow keeps indicating "missing or damaged."   Have followed cleaning instructions.  Same result.

    Hello there! Welcome to the forums!
    @annoyance 
    I understand you have all new HP cartridges installed in your Photosmart 3210xi however, the yellow is not being recognized and you're seeing an error message stating the ink cartridge is "missing or damaged".
    I wanted to reach out and share my suggestion with you. After looking through troubleshooting guides, I would recommend that you try the steps entailed in this specific document.
    The Following Ink Cartridge(s) Appear to Be Missing or Damaged' Message Displays after a New Cartrid...
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Wishing you a great weekend!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My HP Pro 8500 will not print in blue. All new cartridges installed.

    My HP Pro 8500 will not print the a blue color, it comes out pint where it should be blue.  Installed all new cartridges and still does the same thing.

    Hi Calabasas,
    Welcome to the HP Forums!
    I understand that your printer is experiencing a defect in the print quality, and I would be happy to assist you!
    Please follow this document on Troubleshooting Print Quality Issues. If you have completed all of the steps in troubleshooting and the blue still comes out as pink, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How to completely avoid alignment procedure after a new cartridge install?

    Is there a way to completely disable the annoying alignment procedure, every time I change the cartridge? I need to change cartridge about every month, and this is very annoying.
    I want to make alignment only when I need it.
    I have an HP Deskjet 3050.

    Hello,
    Aligning the cartridges ensures high-quality output, The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. I am sorry there is no way to turn that feature off.
    I work for HP, However, I am speaking for myself and not for HP

  • Deskjet 6540 - New cartridge install problem

    I am trying to install an HP Black Print Cartridge No 96 in the right slot but my Deskjet 6540 printer will not recognize or update properly. What could be the problem?

    Hello,
    Aligning the cartridges ensures high-quality output, The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. I am sorry there is no way to turn that feature off.
    I work for HP, However, I am speaking for myself and not for HP

  • New Infinity install and Philips Smart TV

    Any ideas on how to resolve my connection issue. I have a Philips smart TV which until I had Infinity and the new HH3 installed on Thurs(7th Feb.) connected without any issues with my previous supplier's BB (Sky).  Tv is connected and finding net ok but cant/wont connect to Smart Tv.  I've enabled Port clamping as advised in other posts but still no joy.  Any other suggestions appreciated.  I pretty sure its not a TV issue as It worked no problems pre Infinity and TV is as up to date as you can get,Software update etc.
    Thanks
    Solved!
    Go to Solution.

    Hi,
    I have the same problem with a Philips 40pfl8605 and a home hub 3 (but not the infinity package). the tv connects to the router, either wirelessly or via ethernet, but will not load Net TV. I get an error message which says 'Philips server not found. Try again later). 
    Keith, I'm on my home network now but you're link wouldn't open a few minutes ago. I can't work out how to message you directly on this forum, but if you can send me the content of that link on the thread, i'd be grateful. I'm pretty sure this problem stems from the router as the Net TV has connected in the past, when I've had a netgear router. Philips have been useless and after running through standard checklists such as clearing the Net TV memory, reinstalling software (which is up-to-date) etc, simply advised to send the (3yr-old) tv for repair. 
    Looking forward to hearing from you.

  • I have a new HD installed and bought a new mac os x 10.6 don't have the admin password, after booting and pressing alt key a padlock shows up but don't have a password. what can i do

    i just got a macbook pro harddrive wasn't good so got a new one in and bought mac os x 10.6 to install.
    unfortunately after inserted the disc in the drive, and press the alt key, a padlock shows up requiring a password but a don't have the password. there is nothing on the harddrive running. is there anything you can help me with. thank you.
    caboampong

    caboampong wrote:
    bought mac os x 10.6 to install.unfortunately after inserted the disc in the drive,.....
    I'm confused
    I took this to mean that your DID have an install disk.
    By holding down the "C" key, you are booting to the install CD.
    Alternatively, you can hold down the "option" key, to select which drive to which you want to boot.

  • My hard drive recently crashed and I had a new one installed and upgraded to Yosemite since then I have not been able to get on my banks website to do online banking.  Any suggestions on how to get back on there?

    My hard drive recently crashed and I had to have a new one installed, at the same time I upgraded to Yosemite since then I have not been able to get on my banks website to do any online banking.  I just get a blank page after I log onto the bank.  Any suggestions on how to fix this?

    Using Safari? Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items.  Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.
    Try another browser as a test.
    Firefox

  • Trying to reistall Officejet Pro L7680. Get message newer version installed and the process stops.

    I need to know the file I need to delete in order to stop getting a message that says I have a newer version installed when I try and reinstall my printer.  I have deleted all HP software on my computer and I still get the message.  Please help.

    Hi there mikem3791,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for

  • Documents stored in ipod shuffle cannot be found by pc

    Hi, I stored some regular files (such as .pdf) in my shuffle. When I tried to extract them to my laptop, no file was found in this shuffle. By the way, I have already choosed "enable use as disk" option in itune when setting this shuffle up. Could an

  • Change GL Account from Open Item Managed into non-Open Item Managed

    In the former R3 environments, release 4.6 there was the program RFSEPA03 to turn off open item management. However, in ECC 6.0 this program is blocked and there seems to be no possibility to change a GL account back to non-open item mgt. Please comm

  • Inserting multiple records to table in web dynpro

    I am inserted single record in table created in web dynpro view. If i insert the second record then the first record has been overwritten. How to display all rows that i was inserted without overwritting.. Can any one send me the coding???

  • Com.sun.xml?

    I'm just starting to teach myself XML from a text book and the examples use an import line: import com.sun.xml.parser.Resolver I have downloaded the java xml pack from java.sun.com but can't find where I can get the other library I need to import. Ca

  • Unable to disable input field in modal dialog box

    Hi All, I have a screen typed modal dialog box with a table control. I want to disable field input in the table control when some conditions meet. I write the following code in the PBO, but it's not working. The group1 has been set. LOOP AT SCREEN.