New Cartridge Trouble OfficeJet 4620 All in One

Hello,
I just purchased a black ink cartige for my Office Jet 4630. I purchased a 564 XL black. Once i intalled the cartridge I tried to use my copy function and it shot out a very ugly copy. On to subsequent tries I recieved basically a blank piece of paper. I went to the store and exchanged it for another cartridge with the result being a blank copy. Per the printer the cartridge is installled. Thinking that maybe the other cartridges were low and it was being annoying because despite my wanting a black copy it wanted new cartridges I switched them all out. Blank page again. I went into the printer application on my lap top and printed a Diagnostic page and where the black would be its white. I then tried to clean the print heads becuse I have been using the copy function quite a bit lately and prnted another diagnostic page with no change. How can I correct this issue?
Regards.
This question was solved.
View Solution.

The document here may help resolve black not printing on your Officejet 4620.
If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere. They may be able to help resolve the issue even if the printer is not in warranty.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode. Once it goes into sleep mode, it doesn't wake up if a print job is sent to it. If I wake it up manually by pressing the blinking on/off button, it still doesn't print. If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print. I've installed all available updates. I also assigned a static IP address in an effort to correct this but nothing helps. I see that others have complained about this problem, but I do not see that anyone has had success resolving this. My operating system is Windows Vista. I use a Link-Sys Wireless G Router. Thanks.
This question was solved.
View Solution.

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

Printer to take cartridges from OfficeJet 6300 All-in-one

Hi
I have an OfficeJet 6300 All-in-one which I really use just as a printer. I'm also running short of space so am looking to replace it with a standalone printer.
I have built up a stock of cartridges for the 6300 (337,339 and 342,343). Can somebody recommend a printer that will be able to take my cartridges?
Thanks

Hi,
Do you still keep the covers ? Compatible printers should be on the covers.
Regards.
Edit:
Actually the number may vary from country to country, based on the following link, nothing fits your printer even same 337:
http://h10010.www1.hp.com/wwpc/ie/en/sm/WF06c/A1-12771-64199-69422-69422-457378-457380.html
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Officejet 4620 All in one Not printing even with new cartridge

My printer has suddenly stopped printing.
There are no error messages.
My ink level is full.
It slowly started "running" out of ink as I was printing.
New cartridge.
Cleaned printer heads twice.
Ran print quality report and it acted like it was printing but didn't.
Any ideas??

The document here may help resolve black not printing on your Officejet 4620. Be sure to check the vents, if they are blocked the printer will appear to be running out of ink early in the cartridge life.
If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere. They may be able to help resolve the issue even if the printer is not in warranty as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet 4620 All in One Not Printing Black-BRAND new cartridge

Hello everyone, I am hoping SOMEONE can help me, as this has taken up hours of time and resulted in plenty of frusteration. I just replaced my black ink cartridge, and not a single drop of black ink will print. I have genuine cartridges, and cleaned the print heads, both steps one and two, atleast twice each. In the meantime I have since used up all my color ink, which is still working. But black does not show up AT ALL. Sure, I could buy more color cartridges and use them to print black, but at this point, I do not want to put any more money into this printer if it's not going to work properly. I am desperate for an solution! I run a small business from home and I NEED my printer. My warranty expired a few months ago and am really hoping I don't have to pay for phone support.
Does anyone have any advice on how to get black to print properly?? PLEASE AND THANK YOU!!!
This question was solved.
View Solution.

I suggest you call HP support regardless of warranty as described in the post here. If you are in the US call 1-800-HPINVENt, elsewhere see the contact information here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp officejet 4620 all in one

I recently replaced my old modem & router with a new Gateway AGT784WNV Wireless Router. I have a iMac running OS 10.7.5. I could not use the wi fi to connect to printer as I could not locate the Network. So I bought a 2.0 USB and connected it and I could print, but my wife using the same Mac with another password cannot print. As of now she needs to email me documents for me to print on the same computer. What can I do to fix this issue. Thank you.
Gary Marks

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

HP OfficeJet 6310 All-In-One printer on a iMAC OSX version 10.9.5 system
Hello,
As I don't print in color much but had need to I discovered my printer not printing in color. I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled). The printer still won't print color but it advances the paper as if it was printing - just no ink on paper. I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities. The test page print does not show color either. I have no error messages. Don't know what else to do.
thanks
DH

Hi there @dhengr!
Thanks for contacting the HP Forums!
I can see your having a print quality issue with your HP OfficeJet 6310. I should be able to provide documentation that will help locate a resolution. You mentioned you have already tried another HP95 tri-color cartridge with no resolution. I also noticed you said that the quality report from the printer also has no color ink.
If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer. I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer. If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone. They deal with hardware warranty and replacement options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend and thank you again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

New computer with windows 8. hp officejet 5610 all-in-one scanner worked but is now offline.

I have a new dell computer with windows 8. the hp officejet 5610 all-in-one seemed to be fine, and I could scan and print. Now I can no longer scan. charms - settings - change Pc Settings - devices shows HP Office Jet 5600 offline!
There may have been a request to update some software which I may have allowed. Maybe this is my problem? How do I fix this?
thank you
This question was solved.
View Solution.

Hi,
Please download Full Feature Softeware and Drivers from the following link and install on your Dell:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=au&dlc=en&sw_lang=&product=4411...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why is my computer telling me to turn ON my HP officejet 8500 all in one? It's ON!

My HP officejet 8500 all in one printer is powered on. The fax and copier are working but when I try to print my computer (windows 7 pro 32bit) tells me to power on my printer. I had trouble with my DSL internet server yesterday and installed a new modem w/ router from at&t and my printer runs through a netgear prosafe port switch. I had to reboot everything to get the internet up on my PC. the printer worked fine before the internet and hardware trouble. I have tried wiring it directly to the PC with the USB cable and it gives the same error. I have rebooedt, unplugged computer and printer over and over.

Turn the printer off. Hold # and 6 keys while and a bit after turning it back on. This will reset the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ? Loooking for any answers ! Thank Yopu ,JS

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Hp officejet 6500 all in one won't print in black

I cleaned the printhead to eliminate clogs which had worked in past. Did not work this time.
Purchased and installed a new printhead and ran a report which showed the black ink working.
Ink levels in all cartridges, however, were low. Purchased new 920 XL cartridges and installed. Ran an alignment and said it failed.
Ran the cleaning of the printheads and then ran a report and still no black ink.
Ran status and quality reports and now the black will NOT print (when it was printing the day before with the new printhead).
HELP! Why will the black suddenly not print. The printhead is new and the hp ink catridges are all new.

Hi, Jamison ~
I had tried many of the things you noted (from the link) and at one point got an acceptable quality report (that included black) after replacing the printhead so it was particularly frustrating to then go back to no black after loading ink cartridges. I had done the partial reset too (as I had seen that recommendation on a forum) waiting hours for it to sort itself out wasn't acceptable when I needed to print something.
I have to admit that I finally threw in the towel and just got another printer. I need to be able to have something reliable and tire of always sorting through how to unclog; clean; reset; order parts; get new cartridges; run through mutiple cleaning printhead cycles. The lack of black print just seems to happen too often.
Thank you, though! I truly appreciate you taking the time to write a thorough response for me.
JFW
Jamieson wrote:
Hi @jfw , and welcome to the HP Forums!
I see you are experiencing print issues. I would like to try and help.
It appears you have covered much of the troubleshooting already.
I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend this document on Fixing Print Quality Problems for the HP Officejet 6500 All-in-One Printer Series.
If that doesn't resolve the issue, the best recommendation I could make would be to contact HP directly. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide.
Thank you for posting on the HP Forums.

Installation Officejet 4335 all-in-one

Since my laptop crashed (Acer Aspire - Vista) I have bought a new one (hp 250 G3 – windows 7). And I therefore want to reinstall my Officejet 4335 all-in-one. I have reinstalled this printer many times on my old laptop using AIO_CDB_Full_Non-Network_enu_NB which I downloaded from your support site and have never had any problems with the installation.
This time the installation doesn’t work... chronicle of events
Attached USB cable to printer/laptop
Got the usual “device is ready for use” notification
Started installation software
Got error message ...
USB Drivers etc.
Checked to see if Printer visible to laptop – it is !!!
Just for devilment, tried to print something – it worked !!!
But still cannot continue installation because of USB error message
Tried cable on all three USB ports – installation software repeats error message
All USB ports work with various devices (including the printer cable to the all in one)
I need to complete the installation as I need the other functions – particularly scanning.
All help appreciated.
Regards
David M. Gullever

Hello there! Welcome to the forums @Dragonfish
I read your post about the issue you're having with installing your Officejet 4335 on your Windows 7 system.
There is most likely issues installing the printer, as it does not have a driver available for Windows 7, which also means there is no scanning software available either.
Check out the drivers available here: HP Officejet 4355 All-in-One Printer Drivers
The best bet you have would be to try the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the printing issue. If printing still does not work, I would suggest a printer upgrade.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
+Hello Charles,+
+Thank you for contacting HP Total Care.+
+I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
+I appreciate for the opportunity to assist you.+
+*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
+I will be more than happy to assist you when you change the OS.+
+For information on keeping your HP and Compaq products up and running, please visit our Web site+
at:
+http://www.hp.com/go/totalcare+
Sincerely,
Sentinaro
+HP Total Care+
+Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
+For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
+HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

Help! I've spent hours researching this and can't find a solution...
I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
Very Respectfully,
Bobby G.

HP OfficeJet 5505 All-In-One wireless printing.

I've got a problem getting a HP OfficeJet 5505 All-In-One printer working with a Time Capsule for wireless printing.. I'm not quite sure how to debug this, so I'm asking for a little help.
If I connect the printer directly to the Mac, It is properly recognized when I go to add it into the printers list, and documents print normally.
Now when connected to the TimeCapsule, It looks to be recognized in the Airport Utility, and when I go to add it into the printers list, I can see it connected to the Time Capsule.. One difference is that I have to manually choose the printer driver rather than it being auto selected..
When I print a document, it looks like it spools up normally, and gets sent to the printer.. However the printer never starts, or prints.
After reading a few posts it looks like there might be some compatibility issue between office jet printers and the Time Capsule/Airport Extreme as I am not the only one with issues.
Any ideas?

The OfficeJet 5505 uses LIDIL (lightweight imaging device interface language) which depends on the host computer for low level commands. It will not work with the Time Capsule's USB port.
Technically, neither the printer nor the TC is at fault. The printer will only work when connected directly to a computer's USB port. Searching for drivers will be a futile exercise.
Sorry for the bad news. If you want to get a printer on your network, get a network printer.

HP Officejet 6310 all-in-one wireless option questions

I have a HP Officejet 6300 All-in-One printer and I was using it with my wire network connection. I just moved to a new home, which I rent, and I do not want to make new wholes to past the cables then this is my question:
"I have a Cisco Linksys AE1000 high performance wireless-N usb adpater (dual band)" and I saw this product Female USB A to Male Ethernet RJ45 Plug Adapter (on Amazon that I think will be great if I can use it). Can I connect them to make my printer wireless?"
Please help.
Thanks.
BAK

Unfortunately that will not work for this printer. Wireless printing is set up through the printers software that you install on your computer. Since this printer is not a wireless printer, there will be no option to set it up wirelessly in the software, the only options will be ethernet or USB.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

New Cartridge Trouble OfficeJet 4620 All in One

Similar Messages

Maybe you are looking for