New cases for ZEN MP (and ZEN Micro) - and other accessor

All,
Not sure if anyone noticed this, but there is a new case available in the US for the ZEN Micro Photo and the ZEN Micro. It's the Belkin Sport Case for ZEN Micro Photo and can be seen here:
http://us.creative.com/products/prod...y=&product=454
Also coming very soon is going to be a leather case from Belkin for the exact same players. It's not up quite yet as we are waiting for stock still but it should be up in the next few days. I'll post when it comes up.
We also added a Belkin TuneDok for ZEN Micro/MicroPhoto: http://us.creative.com/products/prod...7&product=4535
and a Sync Adaptor for ZEN Vision:M: http://us.creative.com/products/prod...7&product=4539
Jeremy

I think it really depends on what you are looking for. The ZM/ZMP leather case has a cover that you have to open and shut to access the controls unless you have the remote and there is only a belt loop on the back versus a clip if you want to attach it to your body. The Belkin case has an open style front but fully protected with plastic and has three options of carrying (hand strap, waist strap or removable swi'vel clip). Plus it is neoprene whereas the other case is leather.
So I guess it depends on what you are looking for.
BTW ... I have the Pdaden/Capdase leather flip case in black for my ZMP and it is fabulous for the price $24.00 shipped. Has a removable swi'vel clip and the leather is surprisingly nice quality for the price. It is a flip case, so you have to open the cover to access controls but I'm interested in the Belkin because the front is accessible.

Similar Messages

  • How to create a new field for Q3 - QM notification in Header and item level

    Dear All,
    l
               Sub: How to create a new field for Q3 - QM notification in Header and item level
    Ref. the link --> Quality Notification
    We want to create a new field in header level and item level.
    As per the thread the solution is given below.
    In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
    Quality Notification -> Notification Types -> Define screen areas for notification types
    WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
    Please help.
    Question No. 2 :
    THE REQUIREMENT IS GIVEN BELOW.
    We want to hide the field in Q3 - QM Notification
    In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
    Ref the link --> Quality notification
    The solutiion is given below.
    Hi Sami,
    We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
    Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
    Hope this will suffice your requirement.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D
    Hi Sami,
    We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
    Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
    Hope this will suffice your requirement.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D
    By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
    Plese do the needful.
    We are using ECC6.0 Ehp3 and Ehp4.
    With Best Regards,
    Raghu Sharma

    Dear Pushpa,
    Transaction Code :SHD0 is working fine.
    Please accept my sincere thanks for your sharing your Knowledge.
    I am able to fulfill my
    Regarding the enhancement, I have not tried.
    Once I will complete, I will award the fulll marks to you.
    With Best Regards,
    Raghu Sharma

  • What is a good case for iPhone 5? both stylish and protective.

    I want a new case for my iphone 5 i want something thats both good looking and can protect my Phone. especialy shock absorbing.
    my phone fell like 7 times including 1 hard fall ever since Google app is messed up ( letters override eachother) so yeah.
    a transparent 1 is also cool, My iPhone is Sexy.

    Hey, Michael
    Welcome to Apple Support Communities.
    My suggestion is you do have a look on the websites accesories section and find something that suits you, from what you are saying you need a stylish yet strong case. So any good plastic based one will do, you can choose the style and color then. Or you can actually visit the store and have a feel. I have several, when im at work i keep the stylish yet strong ones, but when i am in the field or sports i have a pretty strong one, a little chunky too.
    I hope this helps you. Let me know if it does. If not feel free to give me a shout. Best of luck.

  • How can i get a brand new case for my iphone

    I NEED TO GET A BRAND NEW CASE FOR MY IPHONE BECAUSE MY IPHONE IS DENTED ON THE BACK AND SCRATCHES ALL OVER THE PHONE, IF SOMEONE CAN HELP ME I WILL APPRICIATED.

    You can start by not using all caps - using all caps on the internet is considered as SHOUTING and hopefully you didn't intend to be shouting at all those who read your post.
    When you say case, do you mean the iPhone casing itself?
    If so, you can contact AppleCare for a quote to repair this damage which won't be cheap. I believe there are some 3rd party repair facilities available that will do the same won't be cheap but maybe somewhat less than what Apple will charge.
    Or purchase a case for the iPhone to cover the dents and scratches and to protect it from additional damage with future drops.

  • I downloaded the new software for mac book pro with retina and the office doesn't work

    I downloaded the new software for mac book pro with retina and the office doesn't work

    cynthia alia wrote:
    I downloaded...
    ... but did you INSTALL it?
    Office::2008 was drag & drop, but Office::2011 has an installer you need to run.

  • I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.

    Question
    I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.

    Firefox, Safari, and PhotoShop each handle embedded color profiles differently. For an add-on that makes it easier to experiment with Firefox's color management options, you might be interested in: [https://addons.mozilla.org/en-US/firefox/addon/color-management/ Color Management :: Add-ons for Firefox]. I haven't tried it myself.

  • New case for old model macbook pro 15inch.

    I live in the UK and I'm having trouble sourcing a new cover for my 15" macbook pro. It's the old model with the silver keys. I would really appreciate any information at all regarding where I can find a new case. I'm looking for a protective one that fits it perfectly.  I'm desperate! Thank you! Dan

    If you are looking for a hard shell that might be a problem but if you just want a sleeve, then as long as the sleeve is made for a 15 inch MBP, you won't have problems...
    Take a look here:
    http://www.goincase.com/products/category/15%22+MacBook+Pro

  • New CAS for Load Balancing Exchange 2007

    I want to add a new CAS to an existing Exchange 2007 environment (there is already one CAS and it functions properly) to allow for load balancing. After adding the new server I wanted to do some testing (before I actually set it up for load balancing).
    If I try to log in to a mailbox using OWA I get an error stating that "Exception type: Microsoft.Exchange.Data.Storage.ConnectionFailedTransient ExceptionException message: Cannot open mailbox". I am sure I am missing something simple, but cannot
    figure it out. Could someone point me in the right direction?

    Is your new CAS in the same Windows site as the rest of your Exchange servers?  In Exchange 2007 and 2010, the CAS needs to be in the same Windows site as the mailbox it is servicing (unless you are accessing from the Internet and the other site has
    no externally accessible CAS).

  • Need new case for 30GB iPod

    Simple question, really, but I can't seem to find the answer. Will 5th gen 30GB iPods fit into Classic cases? I'm looking for a pink case for my wife and can't find one with all the new series of iPods except Classic cases.
    Thanks for any help
    Steve

    Interesting you ask....
    Earlier tonight, I was at the Apple Store, my wife wanted a particular case for her 5th Gen 80GB, so, I got the incase leather sleeve...it fit ad was a nice fit, real snug, but, the downfall was that it's designed for the Classic models. The Retail stores only sell for the classics now. Any older products you must turn elsewhere. Anyhow....The case fits but it was just a tad too snug for her.
    My best advice....take the iPod to the store, they'll let you open and try out any case you'd like, and if it isn't to your liking, don't buy it.
    They seem to fit OK, but the Classic iPods are a hair smaller, but you might be OK with the 30GB.
    If you do happen to try it out, let us know how it goes.

  • Installing new drive for OSX-How do I format and remove existing drive

    I'm going to replace the 320G drive that came in my Mac Pro with a 500G. I want to format and remove the 320G, then put OSX on the 500G. How would I go about this.

    Hi,
    Shut down computer, add the 500GB drive into one of the open hard drive slots, reboot, there might be a window that pops up indicating if you want to "intialize" the new drive. Click Intialize (If nothing comes up launch disk utility located in applications--> utilities--> disk utility).
    In the disk utility window, locate the new drive on the left side column. Click on the drive, and in the middle portion of the window there will be 5 tabs: First Aid, Erase, Partition, RAID, Restore. Click Partition.
    Under Volume Scheme, choose how many partitions you want. I your case you probably just want 1 partition, so choose 1 partition.
    Name the volume under volume information, choose Mac OS Extended (Journaled) for format.
    Looking at the buttons below press "Options". Your mac is intel make sure "GUID Partition Table" is clicked.
    Press Partition. Wait a couple seconds for it to partition. Once done, it will show up on the desktop. It's ready to go.
    Next step to decide is if you want to fresh install the OS onto this new 500GB drive OR simply clone over your 320GB. This is up to you. If you don't want to reinstall everything just use a cloning program such as "Superduper!" or "Carbon Copy Cloner".
    If you want to fresh install the OS, insert the OS disk that came with the mac pro. Restart. When restarting hold down the letter "c" on the keyboard to boot from disk. Follow the instructions, and choose "erase and install". If you are going to fresh install, BE SURE TO CHOOSE THE BLANK 500GB, NOT YOUR CURRENT 320GB. To fresh install, the choice is "Erase and Install" I think. Install and your 500GB drive should be ready to go, with a brand new OS installed.
    Whether you choose to clone over your system, or fresh install, if possible always run "Disk Warrior" or "Tech Tools" maintenance disks if you have them either after the OS install or after installing all your applications.
    Have fun!
    noice_T

  • HT2731 I have 2 apple iPods on the same account, And they have the Same songs on them. How can I get a new account for one of them but not the other? Can I wipe the memory of 1? How would I do that?

    I have 2 iPods one I don't use anymore. I would like to make a new account for one but not the other. Is that possible? If I wipe the memory in one will the other wipe out too? How can I do all of this?

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

  • Where can I find a waterproof, shockproof, dustproof, dirtproof etc case for my Ipad Air very soon and not have to wait for the perfect case for months to come out from Lifeproof company???

    Hello,
    I just bought a new Ipad Air 128gb w/verizon coverage. I definitely need a all proof case for it like the Lifeproof case I already have for my Ipad 4 w/retina display.  Unfortunately I'm hearing Lifeproof hasnt come out with the Air case yet.  Can anyone help me locate a company similar that will have that sort of case pls.  thanks.

    I know  Targus has one called Safeport with 3 levels of 'strong, stronger, strongest' but I couldn't find it specifically saying it accommodated the Air on their site. BUt it could be another brand for you to search for.

  • Trying to organize a new workflow for travel using a desktop, laptop and IPad using LR mobile

    Apologies in advance as I'm sure this has been asked but I am swamped with information on the web. 
    OK for travel I want to upload images to my laptop from my CF cards.  I then want to be able to make basic edits and flags on the laptop (which I am yet to purchase) and then have this reflect on my desktop.  I have LR mobile so figured the laptop access would allow me to do the same things as if I was viewing on the IPad but apparently not...Please help!
    I have read about some people exporting the catalog backwards and forwards between the 2 devices and this seems messy and I don't think I want to get into that.  A main attraction was to be able to upload and edit on the road (I'm taking a 3.5 week trip to Cambodia) and then on my return to my desktop have a lot of the work done to then make final detailed edits and subsequent books, prints etc.
    I love photography but I'm not a tech geek so any help/suggestions appreciated!

    On the laptop start a new catalogue for the trip. Import all new photos into it. At the end, copy it and the images to the desktop and in, your main catalogue, use File > Import from Another Catalog to bring in all the work in the trip catalogue. Maybe practice this workflow now and return with other questions?

  • How to add new fields for FB01 transaction both at Header and Line item

    Hi Guys,
    I would like to add the new fields at header and item level in FB01 transaction. Can I acheive this by using transaction EEWB....please help me on this.
    Thanking you

    Hi,
    We are trying to copy a work flow objects from ECC6.0 to 4.6C...where we found the following Select statement.
    *Determine Top WorkItem Instance
      if im_top_wi_id is initial.
       select wi_id top_wi_id wi_rh_task into lw_top_id from sww_wi2obj
         up to 1 rows
         where wi_rh_task = im_wftask and
               catid      = 'BO'      and
               instid     = l_instid  and
               typeid     = 'FIPP'.
       endselect.
       endif
    As table sww_wi2obj can't be found in 4.6C, can any one help how to replace or implement the same logic as above statements.
    Thank you....

  • Help with a New Case for the ZEN Touch 20

    Does anyone know of a case other than the one that came with the player?Something I can use,not like the pouch. It would be nice to change songs or even adjust the volume with out having to pull the player out all the time. If some one from Creative reads this....do you have any idea how much money you can make if you put out a case that gives end uesers access to all functions with out haveing to remove from the case.PLEASE HELP!!!!!

    Please Creative!! We need to have at least one case option that allows access to the screen and buttons at a reasonable price. Maybe strike a deal with a current case manufacturer to supply an option for all of the desperate users out here. I'm seriously looking at options to make one myself from materials I can find (actually came across a how-to on making a case out of a milk jug--please don't make us resort to such measures).
    By the way, the Vaja case is nice, but $80 (including shipping) is ridiculous IMO when you just need something to hold the player and provide access at the same time.
    My 2 cents.

Maybe you are looking for