New charge may see broadband users charged to even...

New charge may see broadband users charged to even look for a fault regardless of if it is found to be in your home or on BT's wires.
Check below.
http://www.thinkbroadband.com/news/4136-new-charge-may-see-broadband-users-charged-to-even-look-for-...

Just a note about the sockets - openreach ( the engineers ) are only responsible for looking after the external network and any fault on the external network is there responsibilities. Any wiring inside is the responsibility of the householder and therefore are liable for charges if any work is carried out in the home. The first point of call should always be your service provider to get them to run a line test for any problems on the line. If there faults department can't find a fault it is most likely inside that there is a problem and a local electrician is always cheaper than an openreach engineer.
hope this helps

Similar Messages

New LoginManager cannot see all users

Hi all,
Just trying to get to grips with users and roles in Azure, and I've hit a couple of questions.
Here's the process I've been through.
I created a new server
I exported a database from an existing SQL Server as a bacpac file, and successfully imported it into Azure (this step I'm hazy on the details, because I only did it the once, and it was a while back now!)
I connected an existing MS Access front end to the Azure SQL Database successfully.
This database is for a client with half a dozen staff. All works well.
Going through the database in more detail today, I noticed that the database in question has users for the staff at my client, but not a user called Andrew - which I've always logged in as. Looking more closely, I see that the Login of Andrew, which I understand
was created as part of the provisioning process when I set up Azure SQL Database, is mapped to dbo within the database.
In order to keep things simple, I decided today to create a new user "Andrew" on the database, which would map to the Server login of Andrew. To do so, I used this statement:
CREATE USER andrew
FOR LOGIN Andrew
However, the following message was returned:
'Andrew' is not a valid login or you do not have permission.
This confuses me, as I can see that the login Andrew does exist, both when I look at the Security > Logins object within SSMS, and if I issue the statement
SELECT * FROM sys.sql_logins
So, I thought that maybe the solution would be to create a new Login, called AndrewR, and then create a new User on the database (and on the master database), also called AndrewR. This I did, and then I used the following two statements (while logged in
to the Master database as the original Andrew account):
exec sp_addrolemember 'loginmanager' , 'AndrewR'
exec sp_addrolemember 'dbmanager' , 'AndrewR'
Now, all seems good, in that the login is created successfully, as is the user. However, I now have the following problems:
When I log in to master as AndrewR (the new user) I can see all the databases. But I can't see any user except AndrewR, dbo, guest, sys and INFORMATION_SCHEMA. When I log in as the original login (Andrew) I can see all the users on all the databases.
Despite having granted loginmanager role to AndrewR, when logged in as AndrewR if I try to create a new user, I get a strange error:
Password validation failed. The password does not meet policy requirements because it is not complex enough.
This would make sense except that the password I've tried to assign is 'drtrtDSP()*)_IPOJTh1s_FREDpw1!' which is about as complex as I can come up with!
None of this solves my original issue of trying to create a user called Andrew to match the original Login of Andrew.
I'm sorry to post several questions in one post, but they seem to me to be all part of this same issue.
Can anyone help or provide guidance?
Incidentally, I've read (several times!) the information at http://msdn.microsoft.com/en-us/library/ee336235.aspx - this is where I've gained what little knowledge I have!
Many thanks
Andrew

Hello
Andrew,<o:p></o:p>
Thank you
for the explanation. Is there is a specific reason why you want to create a
user 'Andrew' for the Server-level principal login 'Andrew'. Cause - <o:p></o:p>
1. The
database user in the master database corresponding to the server-level
principal login cannot be altered or dropped.
2. Although the server-level principal login is not a member of the two
database roles dbmanager and loginmanager in the master database, it has all
permissions granted to these two roles.<o:p></o:p>
Please refer msdn.microsoft.com/en-us/library/azure/ff394108.aspx#logins and msdn.microsoft.com/en-us/library/ee336235.aspx#DatabasePerms for details.
Also, I
believe only the creator of the database(and the server-level principal login)
can create users in that database. For ex - <o:p></o:p>
After you
created user AndrewR and granted it the dbmanager and loginmanager roles.<o:p></o:p>
1. Connect to the database server(master database) as AndrewR.<o:p></o:p>
2. Create a new database AndrewDB and a new login AndrewR1, like below - <o:p></o:p>
create database AndrewDB<o:p></o:p>
create login AndrewR1<o:p></o:p>
exec sp_addrolemember 'loginmanager' , 'AndrewR1'<o:p></o:p>
exec sp_addrolemember 'dbmanager' , 'AndrewR1'<o:p></o:p>
3. Connect to the database AndrewDB as AndrewR<o:p></o:p>
Create user AndrewR1 for login
AndrewR1
-------à this works.<o:p></o:p>
I hope this
helps. <o:p></o:p>

Where to map new charge to users, in SD or RE-FX

Salute asters!!
Where to map new charge to users, in SD or RE
There is new requirement of usersu2026 They want to charge some more Service/Place charge to users. In which module should we consider this, SD or RE, since RE is implemented here and all rental activities are getting done by RE module? Its using place by visiters charge.
Rgds.
Srivastav
+91 7829755109

Hi,
Again wrong forum. But for the solution, you need to capture it in the RE by creating a new condtion type and attaching it in the contract.
Regards,
Deepak

Ipod5 went dead , then i bought a new charger and its still not turning on ... it was working perfectly fine. i had it since may

ipod5 went dead , then i bought a new charger and its still not turning on ... it was working perfectly fine. i had it since may

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work

hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work

Hi When you change your iPad, even if its off it will, turn on when you connect, to charger Check lightining port for any bits. Do a Reboot press &hold power button & menu button hold both down until you see Apple Logo This may help. Cheers Brian

My mother bought a new charger for my ipad mini

my ipad mini had been out of use for approximately 3 months, because i had no charger for it. However my mother bought a charger recently and after being plugged in for an entire night i woke up to see it at 25%, i took it school and while it was plugged in at school it started to lose charge. after 2 days it finally reached 85%, however this morning it said cable or accessory is not certified for ipad, is it my new charger or is it the ipad mini thats the problem?

Are you talking about the cable?
About a wall charger?
The iPad may not charge with the screen on with other than an iPad charger since the screen uses a lot of power and many computer and wall charges to not provided sufficient power.

Every time I connect my ipod touch 4th gen. it says this accessory is not supported by ipod touch so people recommended me to just buy a new charger, so i did, but the night before i got my new charger it stopped charging, what should i do now?

every time i connect my ipod touch 4th gen. it says this accessory is not supported by ipod touch so people recommended me to just buy a new charger, so i did, but the night before I got my new charger it stopped charging, what should I do now?
also my power button does not worked it got stuck so therefor it doesn't work, are there any ways i can help it get loose and working again?

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My new charger wont work for the computer but will work in the wall charger

So recently, the charger for my Ipod touch 5th generation broke(my puppy chewed it) so I went to get a new charger. I found that the new charger was not working when i plugged it into my computer. After i returned the charger, and got one that seemed a little better, i plugged it into my computer and found that that one also didnt work. I was extremely angry and confused about why they werent working. I was wondering if the problem was my ipod or the charger or the computer. So i plugged it into a wall charger in the wall and that did work! So now im assuming its just my computer but it has always worked before when i plugged it into my computer untill the last charger i had broke. Any idea how to fix this? Or is this unfixable?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If iTunes does not see the iPod:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

I just bought a new charger and it charges perfectly but itunes wont recognize it what can i do i tried almost everything

I just bought a new charger and it charges perfectly but itunes wont recognize it what can i do i tried almost everything

nbar wrote:
See other thread, Csound. Sorry. Let's deal with the problem at hand.
Ayala, see Csounds hypothetical questions and answer them to the best you can. Also see my post above, again. Reply.
I'll leave it in your capable hands, I don't need the 'hypothetical' questions answered thanks.

Do i need a new charger in the UK?

hello
i have just moved from Australia to the UK, and I am wondering if I need a new charger for my PowerBook G4 given that the UK has a different voltage to Australia.
I have the adapter for the power point, but do I need a voltage converter too?
Confused... I went to the Mac store in London but they didn't seem to know!!!! The guy tried to sell me a USB charger for my ipod instead?

I've travelled with my powerbook from the US to the UK, Bahrain and New Zealand. It works in all countries without a voltage adapter because they automatically adjust for the different voltages. You may need an adapter for the actual plug in the wall part, but those are cheap and can be got at most electronics stores.

HT4060 My ipad mini wont charge I bought a new charger since the old one didn't charge my ipad and the same problem is happening i charged it over night and when I woke up it said 50% soo can someone help me this is my first apple product a

Well my ipad mini isn't charging.. I with the original charger it didn't show the charging sign when plugged in.. And I bought a new one a 12:00 one from bath bed and beyond. Now it ain't charging again even thought it did a few days ago.. Now I don't know what to do.. I don't wanna keep buying chargers..

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.htmlhttp://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.htmlhttp://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abouhttp://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging-http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipahttp://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.htmlhttp://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.htmlhttp://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-iphttp://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipadhttp://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xzhttp://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.htmlhttp://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

My iPod 4 brand new charger won't show the charging sign and won't connect to a computer. I have went to the Apple Store and bought the charger but it still won't work. What do I do?

I recently got a brand new charger from my local Apple Store. When I got home and plugged it into my charger on my computer nothing happened. It chargesbut it doesn't show the charging sign or make the sound that says its charging. It takes my iPod touch at least 4-5 hours to fully charge. I would just like some tips on what to do. I have tried resetting my iPod and I've tried just getting a new charger, but nothing works. If anyone knows anything that might help I will very much appreciate it. Thank you

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Ok, so basically my charger fell apart on my MacBook pro(2010) and I didn't have the money for a new charger, I got it in the states too if that's relevant. Basically my laptop will not charge, I bought a new charger yesterday and it's still no-use

Ok, so basically my charger fell apart on my MacBook pro(2010) and I didn't have the money for a new charger, I got it in the states too if that's relevant. Basically my laptop will not charge, I bought a new charger yesterday and it's still no-use,not charging . No green or orange light coming on on the new charger either.

It is one of the items that Apple gets criticized at regular intervals. The MagSafe connector is proprietary and unlicensable, so the company has a lock-in on the power options. And as you have now found out, your hijinks trying to avoid buying an expensive new charger may have caused more damage and led to a total no-charge condition.
If lucky and no physical damage has occurred (there IS a fuse in there somewhere on the circuit boards), maybe resetting the SMC can restore charge functionality, provided there is still enough juice: http://support.apple.com/kb/HT3964

Got a new charger should I reset the SMC?

Hello,
This is a continuation of this prevously written thread:
85W MagSafe Adapter gone bad... How to minimize the damage to my MacBook Pro's internal battery?
So the reason why I am writing the following post is that last wednesday I was able to purchase a new 85W adapter from OWC. The adapter matched the model number of the MagSafe adapter that came with my MacBook Pro. However, before I use that adapter for the first time, I would like to know if its necessary that I perform an SMC reset since my MacBook Pro was charged previously with a faulty functioning adapter (see the thread link above)? or if that is overkill and I should just plug the new charger and let my MacBook charge.
Thanks for any quick responses to my question.

vea1083 wrote:
Thanks for the quick reply gentlemen... I'll plug the computer to the new MagSafe adapter.
Will report back shortly...
Ok the charger is showing the correct status lights and it seems to be charging correctly. So everything seems to be working as expected. I am very satified with OWC being the charger vendor this time.
What I will do is the following, I want to award you both for the correct answer so I will do the following, I will split the 10 points in 2 by marking your answers as helpful.

Is this new charger going to hurt my phone or can I keep using it?

I just got a new charger for my phone. Now whenever I plug in my phone now I get the message "This cableor accessory is not certified and may not work reliably with this iPhone". Is this new charger going to hurt my phone or can I keep using it

To add to what Chris said, It isn't guarenteed that it will or won't damage your device.
If you are dead set on not buying a new charger, you can always check and make sure that the charger doesn't exceed 5 Watts. If it does you will damage your device.
For the record, I do reccomned just getting a new charger if you are unsure.

New charge may see broadband users charged to even...

Similar Messages

Maybe you are looking for