New Chromatic Aberration tools kills old settings.

I've just recently found that new chromatic aberration tools kills settings for old chromatic aberration tools.
Lets say I have a PV2010 photo with adjusted sliders for chromatic aberration reduction and selected defringe "all edges".
Now I'm importing this photo to LR 4.1.
Note: I'm not updating process version!
Photo is automatically updated by Lightroom to new CA controls (note it still PV2010 photo).
Well, I must say the the results are superb - they are the same as I was achieving with manual sliders, but now with only one click.
But the problem is - Lightroom says that metadata have been changed, and I am writing back changes to XMP.
But now XMP contains settings for new CA tools, but settings for old CA tools are LOST.
So if I want to open this image in ACR 6.6, or send it to someone with older LR version I end up with completely resetted CA settings, because ACR 6.6 does not have new CA tools, and settings for old tools are killed by LR 4.1 - they are just removed from XMP.
So I am loosing CA removal settings completely when opening image in earlier version of application.
And I am NOT updating process version!
Any comments on this?

Here is screen shot in which you can see that even PV2010 photo has new CA tools and old ones are gone with their settings applied in LR3.
I have tried to import CR2 files without any settings in the XMP into newly created empty catalog and have same result.
When I am switching photo to PV2003 or PV2010 only new CA tools are available.
And saving metadata to file kills old CA settings and writes settings for new tools (even for PV2010 photo) which previous versions does not understand.
To my opinion this is very serious bug!
Here is photoshop feedback message created 5 days ago: http://feedback.photoshop.com/photoshop_family/topics/lightroom_new_cromatic_aberration_to ols_kills_old_settings
Looks like noone cares...
Can someone at least say do I am the only person having this issue, or you can see this behaviour too.

Similar Messages

Chromatic Aberration tools are missing...

A few days ago I got a notification about a new Camera Raw update. I told it to go ahead and install it. After it was done I got back to work. That is when I noticed my Chromatic Aberration tools were gone. The tools for fixing lens distortion and everything were still there, just the chromatic tools were MIA. Is this just me, or is this something that was planned for some reason? I have checked and tried everything short of uninstalling and reinstalling Photoshop and Bridge to fix it. Anyone else have this issue?
Oh btw, I'm on a mac running Snow Leopard

Look for an Auto-CA checkbox in the lens correction area.
Lateral-CA is caused by the red, green, and blue channels having a slightly different size on the sensor. This was fixed by the manual-CA sliders and is now fixed by the Auto-CA capability.
Axial-CA is caused by the red, green, and blue channels focusing at slightly different points. This will be fixed by defringing tools.

No chromatic aberration tool?

i shoot primarily wide angle, so i'm often dealing with CA. by not having this corrective tool as part of the RAW workflow (like in Adobe Camera Raw), i think i'll be locked out of using aperture all together. because, unlike with other features i wish aperture had - layers, masks, etc. - there is no workaround (export to photoshop).
does anyone know if this tool there and i just can't find it? or is there a workaround that i don't know about? because overall, i very much like aperture so far, and want to be able to use it. it would be a shame if this one small but important omission kept me from using what otherwise seems like a great program.
powerbook 1.67 Mac OS X (10.4.3)

thanks, just realized that cs2 has a chromatic aberration tool as a filter; it seems much cruder than the one built into ACR, but it will do the trick and keep me working in aperture.

How do i restore my new iphone device to my old settings after already selecting set up as new device?

I've gotten a new iPhone 5 which is replacing my old iPhone 5 and I wanted to restore my settings from my old iPhone to the new one. However during the set up of the new iPhone I lost connection from the internet, therefore I chosed to set up my iPhone as a new iPhone. I have now gone onto iTunes to see if it'll let me restore my old iPhone settings and it was providing me with other devices but my old iPhone. How can I restore my old settings or will I have to start over as a new device?

Hi and Welcome to the Forums!
Since you did a backup, you can perform a restore:
KB23680How to back up and restore BlackBerry smartphone data using BlackBerry Desktop Software 6.0
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there a chromatic aberration or purple fringing tool in PSE 10?

The subject line basically says it all. The chromatic aberration tool in Aperture doesn't do much for me. Is there one in PSE 10? Thank you.

Well, PSE's implementation of ACR can help correct chromatic aberration somewhat. Here's the original image from somegirl's web site:
Using these settings:
Results in this:
Not great, but better than I expected.
Ken

Would like some assistance with removing chromatic aberration from images . In using the slider tool only some of aberration is removed tried brushing in but not successful. After magnifying image 1005 i can still see some slight purple fringing .

Can anyone assist me in using chromatic aberration tools in removing purple fringing completely from images? I have had limited success in using the slider , but in zooming in at 100% I can still see slight purple fringing in image . i tried brushing in but that did not seem to remove purple fringing completely.

Can anyone assist me in using chromatic aberration tools in removing purple fringing completely from images? I have had limited success in using the slider , but in zooming in at 100% I can still see slight purple fringing in image . i tried brushing in but that did not seem to remove purple fringing completely.

Auto-optimize chromatic aberration settings

This is actually pretty simple to implement, has an obvious interface, and would be very handy.
Add a dropper/crosshairs type tool to the CA module. When touched to the image it will fiddle with the CA settings until the fringing in that area is minimized. This could converge very quickly and accurately in an area like a backlit edge. If it doesn't converge, no big deal, do nothing and let the user try another point.

Yes, and I think version 1 had it too. The high-end cameras adjust in-camera too when producing jpegs.
There's a lot of talk about proprietary lens tables and encrypted raw files on the internet, but I'm almost certain that these are not required. If I can remove aberration by adjusting a couple of sliders and the alt/option key at 400% with a squint, without any lens tables, then it must be possible to do this automatically in software by measuring the green/magenta or yellow/blue levels in an image (or part of an image).
Of course, the proof of the pudding would be in how Nikon cameras and Capture NX deals with non-nikon lenses, like Sigma, Tamron, and Tokina. Do they get corrected too?
There seems to be a trend at Nikon of producing cheaper lenses with quite a bit of lateral chromatic aberration. It makes good business sense to save money on materials if the effect is easily (and cheaply) fixed in post-processing (as long as the aberration can be removed satisfactorily). So the problem isn't going to go away; it may even get worse.

Hi. I tried to change my old icloud account on a new one. After reset the settings I need to enter my old Apple ID account and password, that I don't remember.

Hi. I tried to change my old icloud account on a new one. After reset the settings I need to enter my old Apple ID account and password, that I don't remember.
I do not remember it because when I bought the my iPhone 4s in 2011 I didn't understand how it works and asked a representative to set it up for me. The representative helped me and gave a piece of paper with login and password but I lost it a long time ago.
Before resetting the settings I turned off "Find my iPhone" function, but it anyway asks me to enter my old Apple ID and password. I have the original box, documents, receipt. So how can I solve this problem?

You do not have to call US, but you need to call. Or else.
Contact Apple for support and service - Apple Support

I need to sync my phone with my computer as a new phone. When I attach the cord, iTunes is not asking me if it is a new phone but tries to sync my prior apps. I was having problems and do not want to restore my old settings. How?

How can I force iTunes to let me backup my iPhone to my computer as a new phone? It is not asking me if it is a new device but is trying to restore my old settings.

Go to iTunes Preferences, Devices tab. Check the box "Prevent iPods, iPhones & iPads from syncing automatically".
then connect the phone, click on its name, and click the "Restore iPhone" button.

I have a new Macbook Pro and an old Canon ip Pixma 8500. I have downloaded the software from Canon but my printer settings will still not register it. Looks like I can print a colour calendar but not a letter!

I have a new Macbook Pro and an old Canon ip Pixma 8500. I have downloaded the software from Canon but my printer settings will still not register it. Looks like I can print a colour calendar but not a letter!

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

HT4623 I downloaded new 6.0 software and lost my apps on my 3gs. under itunes when I try and redo it to old settings it keeps 6.0 and I still cant download my apps. What to do?

I downloaded new 6.0 software and lost my apps on my 3gs. under itunes when I try and redo it to old settings it keeps 6.0 and I still cant download my apps. What to do?

Connect to iTunes on the computer you usually Sync with and “ Re-Sync “...

When updating to new IOS on Ipad i lost my purchases in DJ Rig How can i get my old settings back?

Does anyone know how to reset your old settings or how i can get them to give me the update so i do not have to purchase again.

Unless the device was backed up prior to restoring the backup from the iPod Touch, there is nothing to restore.
Just set up the email account again... it's not difficult, but you may need information from your corporate IT dept to set it up.

Move iWeb Seo Tool Tags and settings to a new MacBook

I want to move iWeb Seo Tool Tags and settings to another MacBook.
I have moved the ~Library/Preferences/com.ragesw.iwebseotool.xml and the ~/Application Support/iWeb SEO Tool.
But when i open Seo Tool there is nothing in it.
Can someone help me? What wrong am i doing?
I have moved the iWeb file and it works fine.
/peter

There are two files in ~/library/preferences/
com.ragesw.iwebseotool.plist
com.ragesw.iwebseotool.xml
The site info is in the iWeb SEO Tool doc that is in ~/library/Application Support/iWeb SEO Tool/
Double click this file to open it in SEO Tool.

Chromatic Aberration Gone

I don't know exactly at what point this happened, perhaps with the 4.1 update, but the Chromatic Aberration check box has disappeared from Lens Corrections panel. It isn't where it was a while back under the Profile tab; nor are the old fringe tools available under the Manual tab; the Defringe pup-up menu is also gone. What gives?
I helped a friend upgrade from Lightroom 3 to 4 yesterday and found the same issues on here computer.
What gives?

Thanks, guys. I finally figured it out after some more tinkering. But the infor is not, unfortunately, in Scott Kelby's Lightroom 4 book, which was published before the change. If you can point me to any tutorials for the new version of the Defringe panel I'd appreciate it.

New Chromatic Aberration tools kills old settings.

Similar Messages

Maybe you are looking for