New chud tools 4.6.1 - confirmed working on MDD

Hello everyone,
I would like to take this time to say that I am happy to report the success of installation of chud 4.6.1 on my MDD 2003 dual 1.25 system. As you all know only 3.5.2 was the last known working chud tools. It appears that the new version also has nap mode built in. No further need to select it anymore. Below is a pic of the new layout:
How do I insert a picture from grab to the forums? I would like to show that 4.6.1 works?
Help.

Hi TTabby-
No worries....
Might want to have a look through This if you haven't already.
I do know that CHUD 4.5 Nap mode works automatically on my single processor machine.
Can't say about dual processor G4's.....
I will check further before I make any changes here, to my otherwise functioning-quite-well 3.5.2 Chud.
Good idea.
If it ain't broke, don't fix it!

Similar Messages

Download CHUD Tools then massive power failure

HELP, PLEASE!!!
I've had my MACs for about 6 years now and never had any real problems. Recently however I noticed the G4 starting running quite hot and loud so I decided to use CHUD tools to cool it down a bit. I downloaded the app and ran the 'previous CHUD versions' checker as instructed. As soon as I clicked on it the machine shut down and I've been unable to restart since. (I don't think it actualy launched and I didn't get as far as installing the actual tools app)
The power light has a solid white light on when depressed, but goes no further. I've investigated the cause quite thoroughly and read all the forums about the G4 PSU failure,PRAM reset,battery changing,CPU reseting etc. I've done all of those and have the +5v trivkle on pin 1 of 24 of the PSU.
I've also tried a different hard drive in the machine - trying to ascertain whether it is the CHUD tools causing the problem (software/hardware problem?)and it still won't power up. Therefore I think that it's just a crazy coincidence that I launched CHUD and then had this failure as the 'non-CHUD infected' drive should have enabled the machine to launch I think.
So I'm wondering, I think it has to be either the PSU or power switch itself. I have the 5v trickle as mentioned, but are there further tests I can do on a 24 pin supply to confirm its status please?
If not, Is there a way of testing the power switch on the front of the machine please?
THANKS VERY MUCH IN ADVANCE FOR ANY HELP!
regards
Dan

Even if by 'PRAM reset' you mean use of the PMU switch, you may not have hit upon the single most useful first approach to an MDD that fails to start up: resetting the MLB.
Switch off mains power at the wall or power-board. Open the door and ground yourself on the internal metalwork, Remove the PRAM battery. Unplug the mains cable at the Mac end. (This is Apple's recommendation, but I don't follow it because Australian GPOs—power outlets—are universally grounded three-pin sockets. If your GPO tests as reliably grounded, as well as switched, you don't need to do so, either.)
Wait at least 10min. Replug the mains cable into the Mac (if you separated it above), but do not yet switch on mains power. Ground yourself again. Restore the PRAM battery only if it shows above 3.3V in circuit. Otherwise, replace it with a new battery. Wait 20sec. Press the PMU reset switch for 1sec once, and once only. If the switch bounces it will be interpreted by the PMU as two presses, with an entirely wrong outcome. The PMU is extremely sensitive to stray charge, so make sure that the hand that presses the button is also in contact with the metalwork of the door.
Close the door, switch on the mains supply and start up the Mac from the touch-sensitive 'button' on the ADC display. Given nothing worse than the Mac's former confusion as the cause of its failure, you should be up and away. If not, failure of your PSU is a distinct possibility.

Unable to open indesign after migration to new mac all other programs open and work.

Unable to open indesign after migration to new mac all other programs open and work. Why? Running Yosemite 10.10.1 Indesign CS5

The keyword is "migration." Migrating or copying files for Adobe applications usually does not work. Not all of the necessary subsidiary files are copied to the right location.
You'll need to first clean up the mess with this tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download an installer from here:
Other downloads

A brand new query tool is out on beta, we need feedback, so you get a free copy

We at Nob Hill Software are working on a new query tool:
http://www.nobhillsoft.com/MarieAlix.aspx?HeardVia=ptut
You can read all about it on the above web page, but basically, its a very ambitious project to create what we call 'the query tool to end all query tools': everything you ever wanted, desired, dreamed about in a query tool, and then some.
For that, we need people who will download it, use it, tell us what they think, what's good and what's not, and what they would like to see in the future. This program has been going on since winter 2009, and so far we've made plenty of DB users happy - but we could always use more feedback. No catches, no tricks, we will never ask for money or anything - just to know what you want, so we can put it in. When the tool is finally out on production, all those who contributed will have it for free - for life.
If you're interested, just download and start working. Then email us your feedback, which can be anything from a single sentence to entire pages.
Contact us through the site if you have any questions!
Thank You
Nob Hill Software

You at Knob Hill software are spammers.
Rude people posting in violation of the Terms of Service agreement you signed when you got your right to post in this forum.
Why do you think any of us would want to do business with a company that demonstrates a profound lack of professionalism
and a lack of respect for those of us that use these forums?
Something to think about eh?
An apology would be the appropriate thing for your next, and last, post.

Computer idling sound | CHUD tools...

Hi there,
Since a few weeks (I guess since I installed OS X.4), I've noticed that my computer makes a subtle sound (kind of metallic) every single second. It's driving me crazy.
In the this page: http://docs.info.apple.com/article.html?artnum=86523 I discovered that my computer makes the the computer idling sound (the first one on the page).
I downloaded the CHUD tools, but I have no idea how they works... I don't understand anything! (Apparently, it will install a System Preference pane for the processor. With it, you can disable CPU nap, which lessens the noise for some.)
And turning the speakers up a bit won't help me because I work without music... I need quiet to concentrate.
Thanks!
Chris.

Krissserz --
There are various opinions on whether it will damage your machine over a period of time. It does indeed increase the temp' though (I have tested it on my 2.3 dual machine). My opinion is that you should monitor the G5 while using it with NAP off. In my case, it only varied by 10 degrees, which is not a lot.
Just do a search on the word "NAP" and you will see many emails on this subject. It was a hot (no pun intended) topic on this forum at one time.
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.8) 1.5 GB DDR SDRAM Apple 20 inch. Display

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan

All-New Crop Tool in Photoshop CS6 | Visual Design CS6 | Adobe TV

Crop images faster and with greater precision using the all-new, nondestructive Crop tool. Rapidly manipulate your images on canvas and see your adjustments happen live thanks to the Mercury Graphics Engine.
http://adobe.ly/I7ORrm

Adobe, your new and "improved" Crop tool is trash! It is unintuitive, slow and hinders production speed. Your Classical mode is NOT classical mode! What were you thinking? That by slowing down one of the most core functionalities of Photoshop you're somehow improving it? Your new Crop tool sucks! AT LEAST make the Classic tool REAL classic tool! Ideally, roll back the old Crop, it worked PERFECTLY and needed no improvement!

CS6 PS Cropping Tool has many problems for working professionals...

Ok, I understand that the kids at Adobe would like to change things around in "upgrade versions" of Photoshop. However for working photographers and professionals that crop A LOT of images in the course of their work, the new cropping tool is a DISASTER! A few may like the new tool... however, there are many that don't. http://feedback.photoshop.com/photoshop_family/topics/photoshop_6_crop_tool?utm_content=re ply_link&utm_medium=email&utm_source=reply_notification#reply_10280572
To the point, here's how to fix the problem. Adobe, you have the CS5 PS cropping tool code... please put that code EXACTLY as it is in CS5 into the "Classic" option for CS6 PS. This way, those who WORK with Photoshop and PAY to use the software can get their work done using the excellent crop tool as was in CS5 (which I have downgraded to so I can get work done) and those who are giddy about the new crop tool can play to their hearts content.
Adobe, you are upsetting a lot of paying clients with your new crop tool and the "faux" classic tool option. You might want to address this issue soon!

Ken, I have to say that I too chose to go back to CS5. I feel like I got nailed with being an "early adopter", you know the guys that get to do the bug testing for a company because they didn't know how to do it or were too cheap.
That is something that Noel (How you doing Noel? You probably don't remember me from back in the Macromedia user group days, but thought I'd say hi anyhow) either doesn't understand or isn't acknowledging so far.
I am judging by his like 19k+ posts that he's either a rep on behalf of Photoshop or an avid user. I appreciate what he is trying to do, but on the other hand, just admit the tool is a pain. It isn't intuitive. It does take WAY too long to figure out to use.
I have NEVER had this much problem with any tool in Photoshop. This tool represents the biggest pain I have EVER experienced with a Photoshop tool and I've used it since '93. I adore Photoshop. I am a power user. Those words aren't the words of a flippant newbie.
I know if I use it for 8 hours a day like you Noel, that I will get used to it, but that isn't the point.
The point is that I feel like I was hit with a poorly thought out tool, with a poorly implemented "Classic" mode that feels buggy, to say the least. It's usability doesn't "flow" because for example what genius thought of hitting the P key to go into Classic mode, when that conflicts with the Pen/Paths tool? Really? My deeper concern is that Photoshop is slipping on it's usability standards like Apple is on it's iPhones. In the words of usability guru, Steve Krug "Don't make me think."
What I chose to do is this:
1)Grudgingly use CS6 for the things it does really really well. Can I just say I love the new Raw interface, and love "Clarity" for example? Great job guys. I watched a tutorial and got it almost instantly.
2)Continue to use CS5 for cropping lot's of images, something I also do a lot of. Cross my fingers that whoever dropped the ball on this gets their act together and makes this tool truly usable and intuitive. At the very least they will make the Classic mode work properly. For example, why do I keep popping out of Classic mode? Why doesn't the preference stick consistently? There shouldn't be a learning curve this steep on a crop tool. I'm really surprised this didn't come up in usability testing.
I hate being the first adopter, because they get to work out all the kinks for the people who failed to do their job in the first place. That's what feels like happened here. If users don't complain and give feedback, Adobe will never fix the problem, right?
Now before somebody freaks out and calls this a flame, it isn't. No emotion is to be read into this that isn't expressly stated. I'm not being sarcastic, sardonic or unfriendly. Whatever tone is being read into this is a projection of your own mind.

Image won't export after using Aperture 2's new retouching tools

After I used the new retouching tools: clone and repair in Aperture 2 on a small jpeg image from a Canon point and shoot, I tried to export my image to desktop. Although the exporting "wheel" indicated the image was being exported it showed nothing after 10 minutes and I had to cancel the export. After I "Removed Adjustments" it exported in a flash. Other images that had not been retouched and retouched RAW images exported just fine. I have reported a bug to Apple. Any suggestions?

I had a similar problem with the Aperture trial until I deleted my Aperture library and re-installed the trial. I had previously (about a year ago) installed an earlier version Aperture trial and I might have still had the old library file on my hard drive. I wonder if the Aperture 2 trial upgraded the old library and corrupted it. After I reinstalled, export is still slow when retouch is used, but it works. If you don't have much invested in your Aperture library, you might try backing it up, deleting it and creating a new one. I'm just speculating, though.
Message was edited by: Cyrtolite

Minor Frustration with new crop tool movement

Crop Tool
Currently the new crop tool method feels very unnatural to me in movement. Is there any way we could get an option to maybe invert the x and y movement. Preferably one option for the x and a seperate for the y. I kind of like the way it works but in it's current form I am likely to just revert it to the old style.

Stay with it, and I think you'll prefer the way it works now. I grumbled about it on day one, but feel distictly embarrassed about doing so now, because it is way better now. Check out this video, and see if that changes your mind
http://www.lynda.com/home/Player.aspx?lpk4=101527&playChapter=False
From here

New Title Tool for Adobe Premiere Pro

VisTitle is not a new title tool definitely. But it is newly compatible with Adobe Premiere Pro CS6 & CC. If you are looking for a quick & powerful title application, VisTitle would be a perfect choice.
Now VisTitle 2.5 Trial Version is available. Here is the link: http://www.vistitle.com/ListDownLoad.asp?ID=62.
Anyone who has installed with Adobe NLE system is more than welcomed to download and test it. And if you have any feedback, please let me know.

There are also lots of tutorials on how to use it on YouTube. They are mainly made using EDIUS, since that was the first program to work with Vistitle, but once you get past the part of adding titles to the timeline, the main interface is the same.

Tools required to install to work with Oracle Data warehouse

Could anyone please guide me...as I am quite new to Oracle...
till now I was working on Data warehousing using Microsoft tools i.e. (SSIS, SSRS, SSAS, SQL Server)
So Please tell me which are the tools required to install to work with Oracle Data warehouse
I came to know about OWB and OBIEE, but not sure what exactly these are ?

In order to create and develop a webcenter portal application, you only need to install JDeveloper and download the WeBCenter extensions. That's true.
But this install does not include the WebCenter services like dicussions, document services, analytics,... If you want to use these and integrate them in your portal, then you would need to install the suite as described on my blog.

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

The head phone jack on my brand new iPod touch 5th generation is not working properly

The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

AOL Install Fix using CHUD Tools

Hello,
For those of you who were asking about how to fix the AOL install problem on Intel Macs, here is a tip I found at macosxhints.com:
AOL seems to have a problem installing on multi-core Intel Macs. The installation hangs at "Installing Main Database." I found a successful workaround for this problem. Go to Apple's developer website and download the CHUD Tools. Once installed, there will be a Processor preference pane in System Preferences. Use this to turn off all but one Intel processor, then run the AOL installer. Once the installer finishes, turn the processors back on. Disabling CPUs solved install issues with other apps.
JLM

Holy cow, what a piece of junk installer. SERIOUSLY?!?! The AOL engineers never in their lives tested their application on a multi-CPU machine?
Seriously. How would anyone trust something so junky to their machine.

New chud tools 4.6.1 - confirmed working on MDD

Similar Messages

Maybe you are looking for