New Client Creation in IDES ECC6

Hi,
I have created a new client (900)  using SCC4 and I have added the parameter login/no_automatic_user_sapstar with value 0 before creating a new client.
Then I've checked the table T000 (client 900 is availabe) and usr02 (client 900 is not available).
I have restarted the system, No entries in usr02.
I want to know whether it is possible to create a new client in IDES ?
With Thanks & Regards
Bhushan

Hi,
Go to T-code SCC4, then go to change mode and press new entry. Now enter a (unused) client number along with a short description and other details.
After that please save the screen.
Check your parameter login/no_automatic_user_sapstar (value should be set to 0).
For details please refer SAP Note 68048 - Deactivating the automatic SAP* user.
After this you need to restart your SAP instance so that the change of Parameter comes into effect.
Now login to the system on Newly created client with SAP* user and PASS as the password.
Perform a local client copy using SCCL t-code.
For details please refer:
http://help.sap.com/saphelp_erp2004/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
I hope that this helps you!
Please update the thread status !
Regards,
Prem

Similar Messages

  • New client creation & copying the existing client data

    Hi,
    could anybody answer this?
    I need to create new client 810 and copy the data from the existing client 800 in ides.How can I do this.
    Regards
    Sai

    Hi,
    By using transaction code SO01 we can solve the queary.

  • How to create new client  in SAP IDES

    Hi Experts,
              I have messed up with the existing 800 client in some configuration, Now i want to create a new client and want to set the configurations again, And which client we have to copy 000 or 800, because i did lot of configurations in 800 client. All my transports in 800 client are not released, if i copy 800 client will the old settings done in client 800 will be copied.
              For basis questions, where i have to post in SDN, because i did not find any section like SAP-Basis, suggest me where i have to post.
              Give me some suggestions on this.
    Thanks & Regards,
    Ravi.

    You Need to do something like this .
    Logon to the system
    start Transaction SM31
    Enter 'T000' as the table name
    create a new entry with your preferred client number
    logg off the system
    Start a new gui logging on to the new client with user
      'SAP*' and password 'pass'
    Start transaction 'SCCL'
    Use client 000 as source and your new client as target
    give it the 'go'
    wait some time
    You can also do all these steps through the menu:
    Tools
    Administration
    Administration
    Client Administration
    Client Copy
    Local Copy
    Hope this helps...
    Abhinab Mishra

  • New Client Creation

    Hi,
    Can anyone explain me how to create new client once installation is over.
    Thanks and Regards.
    Rajesh.

    HI,
    For creating the new Client.Follow these steps.
    Create a new client with Tx SCC4
    Logon the new Client with user ID: SAP* and Password: pass
    Start Tx SCCL and choose the Copy profile and source client.
    Schedule the client copy and you can monitor the copy process with Tx SCC3
    Regards
    Deepu

  • Decision for New client creation ????

    Dear All
    We have a situation described below -
    In the SAP clinet we have got several company codes and several plants (More than 100). Now my company is selling 1 plant (e. g. D001) to another company. The new company who is buying the plant is a different group company and does not have any relationship with my company at present. hence it is required to create the new company code and new plant. Then subsequently we have to move all the master data and transaction data from existing plant d001 to newly created plant.
    New company is supppose to share the same SAP server which we are using at present.
    It is also required users of new company should not be able create/change/view data other than their own company code and plant.
    Now we have to option as bewlow -
    Option 1 - Create the new clinet itself in our server and then create the company code and plant in the new clinet.
    Option 2 - Create new company code and new plant under the exsting clinet.
    From functional perspective i feel option 1 is better since user restriction in viewing the data of each can be easily maintained.
    I would like to here valuable comments from all of you about Pros and cons about these 2 options or even any other idea to address the situation i have explained. In case any one you have any document which provides information on this topic, it would be a great.
    Best Regards
    Avinash

    Hi,
    Go to T-code SCC4, then go to change mode and press new entry. Now enter a (unused) client number along with a short description and other details.
    After that please save the screen.
    Check your parameter login/no_automatic_user_sapstar (value should be set to 0).
    For details please refer SAP Note 68048 - Deactivating the automatic SAP* user.
    After this you need to restart your SAP instance so that the change of Parameter comes into effect.
    Now login to the system on Newly created client with SAP* user and PASS as the password.
    Perform a local client copy using SCCL t-code.
    For details please refer:
    http://help.sap.com/saphelp_erp2004/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
    I hope that this helps you!
    Please update the thread status !
    Regards,
    Prem

  • How to install a new client in IDES 4.7

    Hello All,
    I installed IDES 4.7E in my PC, can you please advise how i can install one more client to the SAPGUI logon.
    Thanks for all your comments.
    Sharan.

    Hi Sharan,
    your question is nt clear.
    1. if you need another client like 800,810,811.
    for ex you need 100. for that logon in any of the above clients and goto scc4 and create a new client and then logon using 100 username sap* password pass and goto sccl and copy from 800 to 100.
    2. if u want to add your server in saplogon you have to go for new in logon  and then add the server details.
    let me know if  not clear.
    reward points if helpful.
    Regards
    Muthappan

  • Client And User Creation in IDES

    Hi ,
    I created new client 100 in Client 800 and the user DDIC With the Default PWD.
    After the creation of client 100 in SCC4, I Hit the TC RZ10.
    Here i selected Profile As "Instance Profile".
    Here Where i Should Change parameter login/no_automatic_user_sapstar == 0.
    Iam unable to see this.
    Please help me in this.
    Regards
    Khanna

    Hi Khanna,
    Check these..
    http://help.sap.com/saphelp_nw04/helpdata/en/3e/cdacecedc411d3a6510000e835363f/frameset.htm
    /thread/327681 [original link is broken]
    cheers,
    prashanth

  • How to Reset Password of Client 800 in SQL server2005 of IDES Ecc6.0

    Dear All,
    how to Reset Password in SQL server of Client 800 IDES Ecc6.0.
    & what will be its password.
    with best regards.
    Ishtiaq

    Hi
    Simple logic we have sap* and ddic as default users if you are unable to login to client 800 with any of the user then you need to delete the user sap* from database level so that it will be recreated again and you can login as sap* and password as pass here is the procedure
    login to ora<sid>
    execute the sql statement
    delete from usr02.sapr3 where bname = 'SAP*' and mandt = '800';
    commit;
    sapr3 is your schema id
    You also need to check parameter login/no_automatic_user_sapstar is set to 0 so you can logon as SAP* password pass
    If the parameter doesn't exist then maintain in instance profile
    /usr/sap/SID/SYS/profiles/SID_DVEBMGS00_Host
    Unfortunately you'll need a system restart to enable and disable the parameter
    You can also refer to below links
    http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm
    http://www.sap-basis-abap.com/bc/forgot-password-for-user-id-sap-in-client-000.htm
    Let me know if you need more help
    Regards
    Uday

  • Loging on new client copying from 0000 with SCC4 is failure(ECC6)

    Hi,Expers:
        Now I have a quesion: After I finished the ECC 6 Installation, I want to copy a new client.
    So I log on the client: 000 with name: SAP*, and finished copying a new client :100 with tcode: SCC4.
    Then I log off the SAP system and restart the SAP MMC and OS.After that, I log on the SAP client:100 with name :SAP*.
    but, I can't log in the new client:100 ,system shows error messages: Name or password is in correct (repeat logon).
    Have logon Name: SAP*  any issues: password or the other reasons?
    Have anyone the question??
    Plesase help me solve the issue, Thanks in advance

    Hi Lin,
    After new installation we have to changed setting in instance file for use sap* user in new client.
    First you import the profile.
    The user name SAP* is only active if the profile parameter login/no_automatic_user_sapstar does not have the value 1.
    Regards,
    Anil

  • RFC connection error between Netweaver 7 EHP1 and Ides ECC6

    Hi Friends,
    I try to create  source system  in BI from Netwever EHP1 to IDES ECC6 EHP3.
    During the creation I get a connection error, says. check connction parameter.
    I checked the parameter, everything is fine. Server, System and number.
    When I went to the SM59 and created a connction.
    I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
    The Host name is resolved to 192.168.2.111 wich is OK.
    But when I run the connection test it shows me  "ERROR: partner '80.156.86.78:sapgw06' not reached"
    I have no idea where this IP '80.156.86.78" is comming from.
    No Problem with the opposite way, from Ides to NW and login to the System is OK too.
    Can anybody help me with this problem.
    RG. Jimbob

    Hi,
    What is the next screen that comes up when you click on remote logon.
    If no screen comes up then:
    Check the user type of the user id used for this RFC.
    It should be either dialog or service user for able to remote login.
    If it open a new window and asks for password, then its excatly password issue.
    Also make sure that the password is in numeric and correct.
    Also make sure that the current user check box is unchecked.
    Even if it dosent work, delete the connection and create again.
    Please award points if helps.
    Thanks
    Santhosh

  • CRM E-Commerce BOB Web shop - Duplicate check for New Customer Creation

    Hi,
    In CRM E-Commerce BOB Web shop we have a requirement wherein new customer creation should go through a duplicate check. Only unique customers should be created as BP in backend GUI, in case a customer already exists with the same credentials, BP should not be created and user should get a message that the customer already exist in the system.
    Currently the system is not preventing me from creating new customers with same credentials.
    In case anybody has worked on the similar requirement or has any idea about the same, Kindly help.
    Regards, Vipul
    Edited by: vipul_kumar02 on Jun 21, 2011 4:20 PM

    Hi,
    Any pointers for function module used for creation of a new BP for a new customer request in BOB Web shop?
    Is it same as B2C Web shop?

  • SAP* user not working in new client

    Hi,
    I created a new client from SCC4. And now I am trying to login with SAP* user and pass password but it is not allowing. Note provided in SAP Config Guide is not working.
    I installed SAP Solution Manager 7.0 SP12 and then created a client.
    Please let me know how to solve this issue.
    Points will be awarded.
    Regards.

    Hi!
    I agree that the issue is probably due to the parameters for the automatic user SAP* - not sure about the Masterpassword though - the newly created client is only an entry in a table at this stage, so I don't think the system will know any password but the hardcoded one...
    Something you should be very careful about is the Java-Stack, which is part of SolMan7 and which runs SMD. The Java stack can only interface with one client properly, so I am not sure what's the idea behind the newly created client.
    Regards,
    Jörg

  • To copy a company code to a new client

    Hi,
    I want to copy the ides company 1000 and its related data and customization from client 800 to a new client 900. How can i do that?

    Hi,
    1.Create a logical system in BD54,
    2.Create a new client(900) through transaction SCC4 and assign the logical system created in STEP-1
    3.Login into the newly created client using UID: sap* and PWD: pass
    4.Create a client copy through SCCL transaction selecting the source client as 800 and selecting the desired profile for customization.
    Regards,
    Laawanya

  • Use String Variable in New Object Creation

    Thanks to those who review and respond. I am new to Java, so please be patient with my terminoloy mistakes and fumblings. I am reading in a file and I want to create a new object based on specific field (car for example). As you will notice I grab field 8 here label sIID.
    String sIID = dts.group(8);
    BTW this regex grouping works fine. The problem is seen when I try to use the sIID variable in my new object creation process.
    DateParse sIID = new DateParse();
    My IDE is reporting "Variable sIID is already defined in the scope"
    Is this possible? The assumption is that the sIID will have different value during the processing of the file. For example, car could mean truck, sedan, etc with operators like color, number of doors, mileage, top speed, etc.

    Thanks for the reply. I have include similar and much shorter code for the sake of brevity.
    My problems are centered around the x variable/object below. Ideally this would translate to three objects PersonA, PersonB, etc that I could reference later in the code as PersonA.newname if I wanted to. Hopefully this makes sense.
    public class TestingObjects {
      public static void main(String[] argv) {
           String [] names;
           names = new String[3];
           names[0] = "PersonA";
           names[1] = "PersonB";
           names[2] = "PersonC";
           for (String x:names) {
             PN x = new PN();  // <- Problem
             x.name = x;
             x.SayName();
            System.out.println(x.newname);
    public class PN {
           String name;
           String newname;
      public String SayName() {
           newname = "Name = " + name;
           System.out.println(name);
          return newname;
    }

  • SAPINST: install IDES ECC6 EHP4 ABAP+JAVA (Windows 32 - Oracle)

    Hi,
    I have received the new IDES ECC6 EHP4 DVDs and I nedd to install a ABAP+JAVA instance.
    It is not clear which option I have to choose in the SAPINST program.
    In the past was present ERP2005 central instance. And now ?
    Thank
    Andrea

    Hi Andrea,
    As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
    systems.
    For the dialog instance, you can still use a 32-bit operating system
    As of SAP enhancement package 4 for SAP ERP 6.0, you can no longer install SAP
    ERP dual stack (ABAP+Java) systems. If you want to use both SAP ERP ABAP and
    Java Components in your system landscape, you have to proceed as follows:
    1. Install a separate SAP ERP ABAP system.
    2. Install a separate SAP ERP Java system.
    3. Configure the connection of the SAP ERP Java system to the SAP ERP ABAP
    back-end system
    Hope this clarifies your concern!!!
    Regards,
    Rajesh

Maybe you are looking for