New client/instance with single company data

Hello,
Having to acquire a new company, the problem comes up when the actual SAP client contains more than one society.
Is it possible to have a new client or instance with data belonging to a single one of these managed companies?
How can it be copied/extracted, if possible?
Thanks

solved

Similar Messages

Urgent Issue - Copy DTP and Process Chains in New Client Instance

We have created new client Instance ( CLNT 510 ) based on our present client ( CLNT 500 ).
We have all the process changes, application components from source system CLNT 500 and data ( both for master and transaction data ) in place for the CLNT 500.
Now we need to use the CLNT 510 for our futher development. RFC connection has been established.
Just want to know, do we need to create all the Application component trasfer , Transformation, DTP , Infopackages , Process chains again for the CLNT 510 data.
please help.
Thanks and Kind Regards,
Pratap Gade.

Hello Jr Roberto,
Hello Jr Roberto,
We have company implementing mutiple SAP Implementations in different countries.
Client for BW Dev is 400.
Source system for Client BWD :
ECC Client ERP Dev - 500 ( for Holland Implementation )
ECC Client EPR Dev - 510 ( for German Implementation - Instance of ECC 500)
We are completed with the Client 500 implementation.
We are starting the german implementation and they have created a intance of Holland ECC Dev client 500 for german implementation with german data.
Now they have setup 2 rfc connection in BWD 400.
Also finally when they move to QAS client they are going to integrate the data of the both countries into one client.
Presenlty I need to use ECC client 510 client for our german development.
We have around 40 SAP BI reports in our first implementation. and around 10 in our second implementation.
Just want to know, what are issues to be considered in loading master data ( will it overwrite the master data from the client 500, if i extract the master data from client 510 )...and all the other issues like can I copy all the process chains...etc from client ECC 500 to ECC 510, without creating all transformation, DTP , Infopackages to load all the master from client 510 again.
I need a broad understand on how to go about the development ...starting with Application Components transfer from source system Client 510 ....to report development. ( if possible using the already created objects....infopackages , DTP etc..)
your help would be really appricated Mr Roberto.
Thanks and Kind Regards,
Shekar.

HT201269 i have got a ipod touch 4th gen and i have got minecraft pocket edition on it but i and getting a new ipod touch 4th gen and i would like to know how to get minecraft back on my new iPod touch with all my data on it??? please help

i have got a ipod touch 4th gen and i have got minecraft pocket edition on it but i and getting a new ipod touch 4th gen and i would like to know how to get minecraft back on my new iPod touch with all my data on it??? please help

See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Is it possible to integrate multiple instances with single OAM (Oracle Acce

Hi All,
Please could anyone clarify,is it possible to integrate multiple instance with single OAM(Oracle Access Manager).
We have two instance in development environment, Among them one is already integrated with OAM 11g,Now we want to integrate the second one with OAM 11g. For this already configured OAM is enough or we need to configure the another OAM separately.
Application Version is 12.1.1
Database Version : 11.1.0.7
OS : RHEL 5.3 64 bit
Thanks in advance.

Hi Hussein ,
I Ran below script,
ant -f txkEBSAuth.xml \
-Dwlshosturl=appora.corp.hexaware.com:7021 \
-Dwlsuser=weblogic \
-Dwlspwd=password1 \
-DuseDefaults=true \
-DforceDataSource=true \
-DdataSourceName=DEV \
-DdataSourceJNDIName=jndi/DEV \
-DasadminUser=SSO11GLOGIN \
-DasadminPassword=welcome1 \
-DdbcFile=/u06/oamfmw/Middleware/appsutil/accessgate/DEV/DEV.dbc \
-DserverName=AdminServer \
-DdeploymentName=ebsauth_DEV \
-DfndauthWarFile=/u06/oamfmw/Middleware/appsutil/accessgate/DEV/fndauth.war \
-DplanPath=/u06/oamfmw/Middleware/appsutil/accessgate/DEV/plan/plan.xml \
-DforceDeployment=true \
-DSSOServerRelease=11 \
-DSSOServerURL=http://appora.corp.hexaware.com:14100 \
-DWebgateLogoutURL=http://appora.corp.hexaware.com:7780/public/oacleanup.html \
-DlogConfigfile=/u06/oamfmw/Middleware/appsutil/accessgate/DEV/sample/logging.properties
-bash: ant: command not found
Thanks in advance

TS4268 I buy a new iphone 4S with another company and restored my backup from a 4 and on the imessage activation I get incorrect activation but I can get imessage with my apple id what can i do ?

I have problems with the iMessage activation with a new iphone 4S I buy a new iphone 4S with another company (movistar) and restored my backup from a 4 (telcel) and on the imessage activation I get incorrect activation but I can get imessage with my apple id what can i do ?

I restored it and activated it as a new iphone and tried to activate imessage and is the same error
Also I am receiving a message from +44 7860 015000 with REG-RESP?v=3;...........
But I can't get the activation

I need to record client IP with the Activity Data Collector.

I need to record the user activity with the Activity Data Collector.
One of the data record is the IP address of the client.
How I can do?
In support of the log format that data does not exist.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/8ab49e1b141e1ee10000000a42189d/content.htm]

Hi,
You are absolutely right, this is simply not supported.
Anyhow, in most cases this might also not make too much sense, as the access to the server often (almost "normally") goes via some kind of proxy; in such a case, one would only see one (or two or so if the proxy is clustered itself) IP address in the logs.
On the other hand, just in such scenarios, the proxy is normally able to forward the original client IP address as an additional header variable. If this is the case, then "rfo.rh(X-Forwarded-For)" could do the trick.
Hope it helps
Detlev

Powershell command to migrate Exchange 2007 mailbox databases with a legacy name, & import them into a new 2007 instance, with a new name.

Hi All. I am currently at the later stage of provisioning a new CCR Exchange 2007 migration (to
virtualise old Exchange 2007 hardware) for 5,000 users & have a quick question.
I have created around 15 newly named storage groups, & have named 1 new DB per group, with the same name (let's say New-DB-1), residing within them. The problem I have, is the old legacy DB's have different names (let's say Old-DB-1) & I need
to import them into the new storage groups, to match the new names. So far I can import/export between old & new OK if both old & new DB names\folders etc. names marry up perfectly, but are unable to if there not the same. Does anyone have any thoughts
on how best to tackle this, as this is one of the final hurdles stopping the migration? Many Thanks, John

Hi All
Many Thanks for the feedback.
The terminology 'migrate' was used based around the fact I will be decommissioning the old 2007 physical environment. This is after moving all DB's over to the new newly created Virtual environment that will host all roles.
The solution I ended up using yesterday, was the following:
1) Dismounted the relevant named DB (NEWDB) in the new environment.
2) I then ticked the 'This database can be overwritten by a restore option' box.
3) Copied over the old named DB (OLDDB) to the same location, & overwrote using the new name (NEWDB).
4) Re-mounted the (NEWDB).
5) Ran the following 2 PowerShell commands:
Get-mailbox –database OLDDB | move-mailbox –targetdatabase NEWDB -configurationonly:$true
Get-MailboxDatabase NEWDB | ResetSearchIndex.ps1 -force
6) Checked to make sure the clients were working ok, in the now the new (NEWDB) environment.
Rich: Many thanks for your PS script, which I will test with future DB moves & provide feedback
J
John.

Create Query with New Field combined with Existing InfoCube Data (BW 3.5)

Hi Everyone!
How would you recommend I handle the following situation?
I have a custom InfoCube (which I will call ZCUBE) that has been deployed to production. The business would like a new query that combines Current Standard Price along with data currently stored in ZCUBE.
Now, Current Standard Price is uniquely identified by the Material and Plant to which it is associated. These InfoObjects (Material and Plant) are characteristics of ZCUBE.
I am strugglig since the business will not allow any changes in the design of the InfoCube (i.e. add any new characteristics/key figures).
Is there a way to combine the two data sets? I attempted to use a Multi-Provider using ZCube and a custom ODS, but had no luck since the characteristics were so different. (ZCUBE has almost 50 characteristics defined)
I also have tried adding the attribute Standard Price to InfoObject Plant Material (0MAT_PLANT) but that was not helpful since 0MAT_PLANT is not included in ZCUBE.
From what I can tell I should create an InfoSet using ZCUBE and potentially a new ODS, but that isn't going to work since you can create InfoSets using InfoCubes in BW 3.5.
So... I am at a loss now. Any assistance would be appreciated!
Thanks-
Nathalie

Thank you very much for your responses!
I went ahead and created a custom ODS (Z_ODS) that contained the keys Material and Plant and had the data field Standard Price. I then created a Multi-Provider to sit on top of the custom cube and the custom ODS. Unfortunately, I am not getting the correct response since the Multi-Provider returns a union of the two infoproviders.
Z_ODS
0Material (key)
0Plant (key)
Standard Price
Z_Cube
0Material (char)
0Plant (char)
Char1 (char)
Char2 (char)
Char3 (char)
0FiscalYear
Key1....
MultiCube
0Material = 0Material
0Plant = 0Plant
Char1
0FiscalYear
Standard Price
Key 1
If I run a query just using Material and Plant in the return, the Standard Price and Key1 are returned correctly. If I include Fiscal Year in the query, the standard price is returned in a row associated to a blank Fiscal Year. See example below.
Query 1
Plant1   Material1   StandardPrice1   Key1
Plant2   Material2   StandardPrice2   Key2
Query 2
FiscalYear2009   Plant1   Material1   #(blank StandardPrice)   Key1
FiscalYear2009   Plant2   Material2   #(blank StandardPrice)   Key2
FiscalYear# (blank) Plant1   Material1   StandardPrice1 #(Blank Key1)
FiscalYear# (blank) Plant2   Material2   StandardPrice2 #(Blank Key2)
I know I should be using an InfoSet, but we are on BW 3.5... so I can't include a cube in an InfoSet.
I believe that the solution will be to add all relevant characteristics to the custom ODS... but that is going to be a much bigger challenge then originally expected. Please let me know if I am missing something... a silver bullet would be much appreciated
Thanks everyone!
Nathalie

Need to link old itune account to new p.c with out losing data

got an iPhone 4my iTunes account was on my old p.c, which does not work any more
how do I transfer date from iPhone to new p.c

http://support.apple.com/kb/HT4527
This might help you.

Upgrade Multiple Instances with single mid-tier

I posted this last week, but it looks like the forums had a little "issue" recently . . .
I know that I can install HTMLDB in many databases and use a single mid-tier (see
http://htmldb.oracle.com/pls/otn/f?p=18326:54:14495624057419435878::::P54_ID:481 )
With this approach, when the time comes (December, right?) I won't have multiple mid-tiers to upgrade, but I will have multiple DB tiers (where the real work happens). How will the upgrade handle this? Will the OUI be able to do it? Will I need to manually run scripts? Will it be supported?
Thanks,
A-

I posted this last week, but it looks like the forums had a little "issue" recently . . .
I know that I can install HTMLDB in many databases and use a single mid-tier (see
http://htmldb.oracle.com/pls/otn/f?p=18326:54:14495624057419435878::::P54_ID:481 )
With this approach, when the time comes (December, right?) I won't have multiple mid-tiers to upgrade, but I will have multiple DB tiers (where the real work happens). How will the upgrade handle this? Will the OUI be able to do it? Will I need to manually run scripts? Will it be supported?
Thanks,
A-

Monitor dynamic and arbitrary performance instances with single monitor?

I need to monitor a performance object in such a way that each *instance* within that object is monitored and alerted separately with regards to thresholds. So, for example, if I have a performance object called App1, and that object has five instances (Instance1...Instance5),
I want to be able to monitor each instance separately with regards to thresholds.
The issue is that the instances are dynamic and arbitrary. They are created and deleted on the fly by a different application, and I will have no advance warning of them being created or deleted.
I'm running SCOM 2012 R2. It seems that SCOM performance monitors are missing a checkbox that says something like 'Treat each instance separately' or I'm missing how to achieve that functionality.
For reference, I'm moderately handy with VSAE if this can be hacked together that way. Note that the rate of change of these instances is relatively low, such that a daily discovery would be sufficient if that would somehow assist in enabling this functionality.
However, what I don't want to do is to have to create a separate monitor for each instance - is this possible?

It can be done only with alert rules.
Vladimir Zelenov | http://systemcenter4all.wordpress.com

How to create a "News" Content area with an effective date

I have a requirement to create a content area such that each item which is uploaded
will have an effective viewing date range. I know I can create a custom item type
and prompt for the Start View Date, and the End View Date.
Questions...
1. How do I 'filter' the displayed content so that the 'news' item only show up
if the current System Date is between the Start/End View dates ?
2. Exception, the Content Manager should be able to see the entire news content
items regardless of the system date ?
Page parameter mapping seems like a partial solution, but I don't see how to
create the folder filter predicate like "where SYSDATE between view_start and view_end.

Why not use Publish Date and Expiry Date?

Problem creating a new connection instance with MSVC7.1

Hi all,
I have a problem with MSVC7.1 and the OCCI library. I am getting an unhandled exception error when trying to create a new connection:
con = env->createConnection (user, passwd, db);
I have seen a thread about MSVC7.0 and the patchset 9.2.0.4, but is it true to say that this one is only fixing the problem with MSVC7.0?
Does anyone know how I can get OCCI to work with MSVC7.1?
Thanks,
Niek

Shankar,
Thanks for the suggestion. Its a static executable so it shouldn't be looking for the DLL. I've put %ORACLE_HOME%\oci\lib\msvc\vc71 first in the PATH anyway, just in case we change to dynamic linking in future.
Just in case it was linking to the worng oraocci10.lib I also temporarily renamed any oraocci10.lib libraries in any other directory under C: to xxxoraocci10.lib, just to be sure. The problem still occurs. Any other ideas please?
The Visual Studio .NET 2003 link command is:
/OUT:"C:\adapters_build\osmm_adapter\Debug/osmm_adapter.exe" /INCREMENTAL:NO /NOLOGO /LIBPATH:"C:\oracle\product\10.1.0\Client_1\oci\lib\msvc\vc71" /LIBPATH:"C:\oracle\product\10.1.0\Client_1\oci\lib\msvc" /NODEFAULTLIB /DEBUG /PDB:"C:\adapters_build\osmm_adapter\Debug/osmm_adapter.pdb" /SUBSYSTEM:CONSOLE /MACHINE:X86 ociw32.lib msvcrt.lib msvcprt.lib oraocci10.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib
User environment variable lib is:
C:\Program Files\Microsoft Visual Studio .NET 2003\SDK\v1.1\Lib\;C:\Program Files\Microsoft Visual Studio\VC98\mfc\lib;C:\Program Files\Microsoft Visual Studio\VC98\lib
System environment variable LIB is: C:\Program Files\Microsoft Visual Studio .NET 2003\SDK\v1.1\Lib\
regards
Rich

Two HTMLDB instances with single Database

please tell me what if I just want to configure and connect an additional apache server to my existing Database. SO that i can get another way for connecting to same databse. ( Mirroring). If this is feasible then please tell me how to configure the apache server. I have tried to configure dad but i think i am not doing it the right way.I am on Oracle 10g with applications made in HTMLDB, I tried to use the dad file for making the connection. During the installation the error message states that " FLOWS_010500 user already exists if you want to continue the installation, please drop the user or specify a different database and try again.. Can any one tell me how can i connect to the Databse with another instance of HTMLDB.
Thank you.

Hi,
Issue Clerifications
1. You have one DB Node and you want install two htmldb application nodes.
2. Which apache servers running on that DB Node.
3. Which listiner ports are there on that DB Node.
4. Are you try to install HTMLDB, What error messages are you facing.
Regards,
Upendran .A
DBA Team

Multiple instances with single DAD

Hello,
I need an example on how to configure multiple schemas example i have test1, test2, test3 schemas in one database, In DADS.CONF file how can i configure multiple instances to point to how ever logged in... test1 is used by one user, test 2used by another user etc... how i can acheive this....... please help.

Somethin like this
<Location /test1>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername test1
PlsqlDatabasePassword passfortest1
PlsqlDatabaseConnectString yourdb
PlsqlAuthenticationMode Basic
PlsqlDefaultPage PHOTO_ALBUM.VIEW_ALBUM
PlsqlDocumentTablename PHOTOS_UPLOAD
</Location>
<Location /test2>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername test2
PlsqlDatabasePassword passfortest2
PlsqlDatabaseConnectString yourdb
PlsqlAuthenticationMode Basic
PlsqlDefaultPage PHOTO_ALBUM.VIEW_ALBUM
PlsqlDocumentTablename PHOTOS_UPLOAD
</Location>
And so on for any of your users. if the Default page is the same you wont need to change it, if no change it.
Greetings.

New client/instance with single company data

Similar Messages

Maybe you are looking for