New client roles and profiles not being recognized in CUA

We recently did a client copy and I am trying to add roles and/or profiles to users, but CUA does not recognize either. When I choose "Text comparison from child sys." I get an error message for that new client that says, "User has not RFC authoriation for function group SUU6."  Any assistance you can provide would be appreciated.

>
Sandip Maiti wrote:
Better assign SAP_ALL and SAP_NEW or any other role containing highest authorizations to the communication id
No, it's not better. It's a bad practice assigning SAP_ALL to communication users. It's a violation of Principle of Least Privilege. You should also use SAP_NEW just for limited period of time. SAP provides a role for this purpose. It's mentioned in CUA cookbook. There is a recent post from Julius on this forum about removing SAP_ALL from the system. It has some info why SAP_ALL and SAP_NEW are not supposed to used.
Cheers

Similar Messages

  • My ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

    my ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

    What have you tried so far in terms of troubleshooting?  After leaving the Nano to sit and charge for at least 30 minutes, try resetting it by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. You'll want to make sure the Hold Switch is not in the On position as well.
    B-rock

  • My battery  wont charge and its not being recognized.

    Okay, I got my MacBook yesterday (4-7-08) and I noticed that it wasn't charging. Went through all the different ways of trying to fix it and have come to the conclusion that it is a bad battery. I called customer service today and all my spec. and what not are bad....like really bad....
    +AC Charger Information:+
    +Connected: Yes+
    +Charging: No+
    +Battery Information:+
    +Model Information:+
    +Device name: ASMB016+
    +Pack Lot Code: 0002+
    +PCB Lot Code: 0000+
    +Firmware Version: 0110+
    +Hardware Revision: 0500+
    +Cell Revision: 0102+
    +Charge Information:+
    +Charge remaining (mAh): 0+
    +Fully charged: No+
    +Charging: No+
    +Full charge capacity (mAh): 0+
    +Health Information:+
    +Cycle count: 0+
    +Battery Installed: No+
    +Amperage (mA): 0+
    +Voltage (mV): 0+
    Now, about 20 minutes ago, I notices that it's not even recognizing the battery at all. So, now I'm trying to figure it out.
    I received this laptop from school. I'm am a graphic design student and I have never really used a Mac before...I just want to know if it's just the battery or if I need a whole new one.
    Please help!?!?! What do I need to do? What the hecks is wrong with it??
    Message was edited by: xshesxpoisonx

    Try resetting the SMC.
    Unplug the computer. Remove the battery. Hold down the power button for *5 seconds.* Put the battery back in. Plug the computer back in and turn it on.
    Unfortunately technology is not perfect and you may have received a dud. But that's a load of crap that the school won't take it back. Did you get it at your school's computer store, or is it used and they gave them away? If you got it from the store, then there's no reason why they shouldn't take it back. Ask to speak to a manager.

  • Snow Leopard client for NetRestore image not being recognized in Mountain Lion Server

    I target firewired a MacBook Pro running Snow Leopard and ran System Imaging Utility and the machine does not show up as an option. Does Mountain Lion Server support Snow Leopard NetRestore images or am I doing something wrong?

    I'm actually trying to figure that out as well. We have 10.5, 10.6, 10.7, and 10.8 Images we wanted to put together for our netrestore images on our server, but can only do 10.8 images currently.
    We also have the AppleCare Helpdesk diagnostic kit which includes hardware tests, we were only able to get the newer mid-2012 and late-2012 Diagnostic utilities to netboot but none of the older ones.
    So do we need a server running the older OS to get these or is there a better alternative? i mean really shouldnt be a problem considering theyre running inside of an image and dont rely heavily on the server resources other than to say "Yep, goto this file/directory".
    I'd like to know more as well....

  • New 7th generation ipod keeps flashing on and off. Wont charge, and is not being recognized on itunes

    I just got a brand new ipod nano 7th generation. I plugged it into my computer and it began to flash on and off. I tunes will not recognize it and I cant turn it off.I tried reseting it and that didnt work either. My brother then tried and got it working. Said it was fully charged and was able to put music on it and listen to it. Later that day I turned it on and it just continued to flash on and off and the same problems are occuring. Any idea whats going on??

    IPOD NANO FLASHING ON AND OFF
    see if this helps

  • SKYPE and Headset not being recognized on my new iMAC.

    I used SKYPE on Windows and now have a new iMAC. I have downloaded the software successfully, however, when I plug in my Logitech headset with mic the Mac doesn't recognize it. My only choice seems to be the built-in mic and speakers. My headset is Mac compatible. Am I doing something wrong?
    NOW I'm a novice on Mac so any help will be appreciated but I need it in laymen's language. Thanks

    It seems that the Logitech Headset needed to be placed in the USB port prior to signing into SKYPE. I changed to another USB port (maybe that was truly the problem) and I turned on SKYPE after. Mostly likely MAC wants everything connected before signing in. ON PC I didn't have to do that. It doesn't matter, as long as it works.

  • IPhone and iPad not being recognized by iTunes

    Hi All,
    I had a late 2007 macbook pro that developed a line across the screen where everything below it was gray. At first it was a simple 'wiggle of the screen' fix, then it evolved into a 'put a bag clip on the side', then it became a 'put a bag clip on the side and wiggle it to find the perfect spot'. My friend (who has the exact same model bought 3 days apart at the same location) upgraded to a macbook air and gave his old computer to me so I'd have a working screen again. He had updated the computer to lion before giving it to me (I had snow leopard). I had the HD's swapped as well as my ram (as I had 4 vs 2gbs). Now the computer is having some serious issues. When I plug in my iphone or ipad it isn't recognized in iTunes, I did notice its recognized in iPhoto but won't actually bring up any of the pictures... just shows that they exist (but are blank). Google Chrome crashes now everytime I use a command to open a tab or close a window etc. I've also noticed that programs are taking 15-30 seconds to open and I'm getting a lot of spinning wheels. Everything is updated and I've tried re-installing snow leopard and the programs that are being affected. And that's all I've noticed so far, but its only been 24 very frustrating hours.
    I'd go to apple but all the products are out of service so there won't be any help there. My friend had none of these problems before giving me the computer and took meticulous care of it. Anyone have any ideas what is going on?? I'm having a hard time trying to understand how swapping a HD could possibly cause all these problems.
    Thanks a bunch,
    Evan

    Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

  • My Iphone 4s is stuck in recovery mode and is not being recognized by Itunes.

    I've tried updating my itunes, restarting my computer and nothing seems to be working. My phone is stuck with the itunes logo and the cable telling me to plug it in. ive tried everything but nothing seems to be working.

    Hey Sonia.jackson
    Thanks for the question. I understand that your iPhone is not recognized in iTunes. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Specifically, if your iPhone is not recognized while in recovery mode, see Step 5 - subsection "If the device is not recognized while in Recovery Mode":
    Thanks,
    Matt M.

  • HT203242 New Apple External Disc Burner not being recognized

    Have an old Apple 2006 Intel Imac.  Burner no longer works and purchased an Apple External Burner.  The system is not recognizing the burner it still wants to recognize the internal burner that doesn't work.

    I suspect it is the adapter throwing a wrench in the works.  Why not get an IDE drive instead?
    See here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007589%20600003705&IsNodeId=1&name=ID...
    What model HP is this anyways?
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • My iPod Touch (newest generation) won't sync and is not being recognized by my computer OR iTunes. It WILL charge through the wall charger. It is now stuck on a screen directing me to connect to iTunes. What can I do?

    I have restarted, reset, erased all data and network settings, tried different ports and different cords, restarted computers, reinstalled and updated iTunes... and now I cannot use my iPod at all. It is less than 6 months old, Apple won't help me on the phone unless I pay, and the nearest apple store is 2 hours away.

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • 5g 30gb u2 ipod will only charge, and is not being recognized by my computer (windows vista)?

    i've tried everything and then just yesterday I tried to sync it and i did. but today it won't pick it up. it just lays there charging
    this has been going on for like 3 months already!

    I am afraid that the solution did not work... the ipod touch of mine seems really not functioning. It receives an electric isgnal from the computer but it doesnt sync at all... Whenever I put my ipod touch off and plug it to my computer it turns on but it doesnt sync... .. Moreover, I have used different PCs so as to try it syncing.. I have used mac book pro and windows 7 laptops but it gives similar feedback, which is NO FEEDBACK at all...

  • My ipod is not getting charged, and its not being recognized by windows

    The day before, i left my ipod in the bathroom for the whole day without doing anything to it. Yes, the battery was already drained i just didn't charge it.
    Today, I connected my ipod to my computer to charge but nothign is happening. Usually it'll say say something like "please wait very low battery", but as of now its completely blank. I did the basic troubleshooting procedures, reseting, restarting pc, updating... etc. I also tried to connect to a different computer but it still doesnt' work. I always leave the cable connected to the pc sitting on my desk and i'm positive nothign happenend to it, unless it broke while sitting on a table. I've had this ipod for bout 8 months now and this has never happened.
    Is there anything else i can do to fix this before sending it to apple?
    Thanks

    1. Battery life IS directly related to quantity of charge cycles.
    2. I never heard the "400" figure. Where did you get it from?
    3. Even if "400" is correct, the battery could have been defective from the start and perhaps this one can take only 100 charge cycles. For what it's worth, it does seem like it died too soon. From what I've seen here on the forums, batteries typically ast 18 to 24 months, obviously dependent on usage.
    4. I could be totally wrong about the battery being shot! I just can't imagine what else it could be.
    All the above notwithstanding...
    I don't think that the magnet storage is a good idea but I don't think that it would cause this problem. Unfortunately, the bottom line is that you can't do any testing or try any of the basic repair sequences if you can't charge the iPod. If you're close to an Apple Store (owned and operated by Apple), take it to the "Genius Guy" or whatever he's really called. You will need an appointment. Don't tell Apple about the magnets!

  • My iPod touch 5th gen went black and is not being recognized by my computer?

    My iPod touch 5th gen was working perfectly fine about an hour ago i was taking pictures talking to my friends. I had it in my pocket for about 30 mins without using it and when I went to grab and check on it went completely back and I thought it was dead but I remembered it was charged more than half way.  When I got home  I plugged it in my computer and it doesn't appear on my computer what do I do?

    Dang, if you had a Windows, I'd definitely be able to help you. Maybe try restarting your computer, & re-installing the Apple Mobile Device Support & iTunes under your "programs" on your computer settings. Idk if this helps because I have Windows not Mac :/ Best of luck.

  • My ipad is not being recognized by the new iTunes update that just came  out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini about a month ago

    My ipad mini is not being recognized by the new iTunes update that just came  out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini

    I found this is another thread - same issue.
    Re: iTunes has stopped working. Why? 
    Sep 11, 2013 6:07 AM (in response to thurdy)
    Resolved!
    After contacting Apple, I received a reply from their engineers:
    Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    And that did the trick.
    Message was edited by: Stryder777

  • HT201974 I just installed a wireless cable modem for a desktop PC and my MacBook Pro;  After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password.

    I just installed a wireless cable modem for a desktop PC and my MacBook Pro;  After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?

    Hi twinkytomes,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    AirPort Utility 6.x: Password-protect your wireless network
    http://support.apple.com/kb/PH5119
    Cheers,
    - Judy

Maybe you are looking for

  • Passing Table name as parameter to proc.

    Hi, I need to know how to pass a table name to a oracle procedure. In that procedure I will put that table name in a variable and then I will make operations on that table like DELETE, UPDATE and INSERT. Kinldy give me the solution for the above prob

  • How to print on small cardboard card?

    I have an HP 4525 LaserJet and am using windows 7.  I'm trying to print on a small cardboard card. Since the card is so small I am taping it to the center of a regular 8.5/11 piece of paper and feeding that through.  The result is the card in the mid

  • Bill of lading is not populating

    We are entering bill of lading information in MIGO but when we are posting invoice through MIRO Bill of lading field is empty. What can we do to it appear on the MIRO. Regards Ram

  • MobileMe to ICloud Problem No 1

    My Wife & I had a family-pack Mobile Me account. This allowed us to have separate e-mail addresses but a common calendar & address book. We now have to have separate iCloud accounts to get the mail to sync, so how do we share our address book and cal

  • Help!...Playback delay in Logic Express 9

    I have been having problems with a delay in the tempo when playing back a recorded track. Latency is not an issue when recording and all sounds well through the monitors during track recording but when I play the recorded track back it is out of temp