New Comp/wireless G

I am about to purchase a new comp, I already have a Wireless G router at home set up, what exactly do I need with this new comp to get wireless running? I am purchasing a Dell xps 410.

you do not have to do anything on the new computer...if it is a wired computer , connect an ethernet cable to the router's LAN port or if a wireless computer , it should pick up the wireless signal and connect to the network

Similar Messages

  • I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

    I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

    You are allowed to have two machines with activated installations, so if you only had one installation, you still have the option to install on a second without doing anything further than that.  If you originally downloaded the purchase thru Adobe then you might find a download link available in your Adobe account online.  You can also download thru the following page if you can find your version:
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html
    You can have the first installation deactivated to free up the activation and have it available for another machine again as well.  YOu need to contact Adobe Support thru chat for that.  For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • How do I cancle an ipod account on one computer and set it up on a new comp

    OK so when my mother first got her ipod she didnt have a computer so she had to autorize her ipod on my brother comp, but since then I purchased a computer for her, I have my own ipod touch authorized to this new comp. Every time I try to sync songs from the new comp to her ipod it doesnt work right because I keep getting my songs synced to her ipod.
    I figure that (a. I need to take her ipod off of my brothers computer. (b.reauthorize her ipod to the new computer. And (c. creat an entire new library just for her ipod and songs. How do I go about this?

    iPods don't have accounts nor are they authorised. There are a couple of ways to create a new library. It's possible to have multiple libraries in a single Windows user account. To create or access a second (or more) library, hold down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
    Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. The new library will be empty until you add content to it. To get back to your original library you need to close iTunes and open it again while holding down the option/shift key, this time choose to open an existing library and navigate to its location. Multiple libraries can prove tricky when using iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
    Another option is to create a separate Windows User account for each person on your PC or Mac. Different user accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
    I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Create A New User Account In Vista
    You can also fill the library by copying the songs from the iPod and putting them into iTunes.
    1). Connect your iPod to your computer. If it is set to sync automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
    2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
    3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads and including iTunes purchased songs and in some cases, videos and games) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    A selection of iPod to iTunes utilities:
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    YamiPod Mac and Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.

  • New apple wireless keyboard & iPad 3 pairing question

    Bought a new Apple wireless keyboard this week. Had some trouble pairing with iPad 3. Took me 4-5 attempts but it finally paired successfully after 10-15 minutes. Question for all you gurus...  When the wireless keyboard arrived on Friday, I first paired it with my MacBook Pro. Could that have caused issues when I re-paired the wireless keyboard (today) with my iPad 3. And further, this will sound like a silly question, can the wireless keyboard be paired with two devices? I don't mean simultaneously. Does it screw up any settings to use the key board with separate devices/computers? Wondering -- if I keep my wireless keyboard at my office -- can I go to work with either my MBP or my iPad and simply use this one wireless keyboard? Or should each device have its own dedicated wireless keyboard? That seems redundant but I kind of love this keyboard already and would be willing to buy a second, if need be. Obviously, I don't want to spend extra money if it isn't necessary. Am I going to have to re-pair the keyboard and device each time I switch between the iPad and the MBP? Thanks all. You are always helpful and I appreciate it.

    Thanks for the quick reply Skydiver! So...I really should buy a second wireless keyboard so that I don't have to go through the hassle of re-pairing the keyboard when i switch devices, yes? Yes, I believe I've answered my own question as I now sit here with my MBP attempting to pair it to the keyboard. Oy. Taking forever. I don't mind buying a second -- for $69, it seems to be the most efficient thing to do. Now I just need to figure out a way to designate which wireless keyboard goes with which device. Time to buy a little sticker! Thanks again.

  • If I want to put windows7 on my Mac,do I need software for a new comp. or a refurbished?

    If I want to put windows7 on my Mac,do I need software for a new comp. or a refurbished one?

    Mikestoyzz wrote:
    Looking on eBay,the software is labeled for new or refurbished.i'm putting it on through boot camp.
    With my limited knowledge, I don't think that it matters.

  • I have a new Epson wireless printer connected and the iPad recognizes it but it won't print. What is AirPrint and how do I connect it?

    I have a new Epson wireless printer connected and the iPad recognizes it but it still won't print.  What is AirPrint & how do I connect to it?

    Patti-
    Is your Epson printer on Apple's list of AirPrint capable printers?  See <http://support.apple.com/kb/ht4356>.
    If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint.  Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
    One other possibility is that there could be a print job stuck in the iPad's print queue.  Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen.  Scroll across and see if the Print Center is there.
    Fred

  • HT3500 I have a new epson wireless printer but can not get my Mac laptop to print to it even after doing the installations.  What do I need to do

    I have a new epson wireless printer but cnannot get my Mac laptop to print to it.  Any suggestions

    Can you find your printer in Print & Fax?

  • HT1443 I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer.  How do I find the right item to download?

    I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer.  How do I find the right item to download?

    There is no download; you need to buy a Mac OS X 10.6 DVD.
    (83218)

  • HT4356 I was gifted a new Samsung wireless printer model ML-2165W, it works with my desk top and lap top but can't get it to work with IPad.  Did I just receive a "boat anchor" printer in the eyes of Apple?

    I was recently gifted a new Samsung wireless printer Model # ML-2165W and while it works fine with all my computers, I can't make it print from my IPAD.  Was I given a "boat anchor" in the eyes of Apple?

    It looks like your printer isn't on the list of air print enabled printers. It'll still work, you just need to do some tweaking.
    You can see if samsung has any apps to enable printing.
    or
    You can look into a third party app like Print n Share or Print Central.
    Then you can print from your iPad.

  • I am currently managing 20 iPads on a macbook. I would like to manage the same 20 iPads on a new macbook pro. I have logged into the iTunes account on the new machine and see our apps but not the devices. How do i get the devices to be shown on new comp?

    I am currently managing 20 iPads on a macbook. I would like to manage the same 20 iPads on a new macbook pro. I have logged into the iTunes account on the new machine and see our apps but not the devices. How do i get the devices to be shown on new comp?

    Has anyone used apple cpnfigurator for this purpose?

  • I just got a new computer and i still have to use old comp to update and manage apps. how do i switch over to my new comp?

    i got a new comp yet i still have to use my old one to update and manage apps on my iphone 4. how do i switch it over?

    What I do when I get a new computer is the first time I turn it on is use Setup Assistant. Once Setup Assistant has finished doing its thing, the new computer is just like my old one.
    Allan

  • Transfering  aperture library via vault to new comp

    I apologize in advance if my question already have been answered in another thread. But I couldn't find any threads matching my problems.
    I recently bought the new iMac after my old 24" could not handle the pressure anymore. I wanted to move my aperture library from the old to the new. And ofcourse I wanted all info (adjustment changes and so on) to come with in the move. After reading a few threads on the subject I created a "Vault" that I later opened up in the new comp. At a fist glance everything looks great in aperture but when opening up a picture to make adjustments it says "image offline".
    On my old comp I can see (where my pics are stored) two aperture files:
    Aperture Library
    Aperture Library_original
    …so far so good.
    But then that are tons (well, many) folders named like my projects in aperture. And not folders within the aperture library file but stand alone…if that makes any sense.
    What am I doing wrong? I get all the pics over to my new comp with the help of Vault but can't edit any of my pics from a few months back (when for some reason aperture started to create folders outside the library file)
    On my new iMac i have 2 files
    Aperture Library
    Aperture Library_old
    ...so no folders got transfered
    /Jonatan, sweden

    It looks like your Aperture library were a referenced library. When you imported your image files you did not import the originals into the Aperture library, but stored them in folders outside the library. That are folders named like your projects that you are seeing. When Aperture needs to access the originals to render edited versions, it will reference the image files in those folders, see this section in the Aperture 3 User Manual: Aperture 3 User Manual: Working with Referenced Images
    When you create a vault, Aperture will only include images that you imported into the library, not the originals you stored outside. You need to copy the folders with projects as well to your new mac and reconnect them to the image versions, otherwise you will not be able to edit your images.
    But it looks like you did create these folders outside accidentally and did not intend to use referenced original files. If that is so, I'd suggest to repair this, by consolidating your library.
    Select the "Photos" view in the source list of your Aperture Library and select all your images at once.
    Then use the command "File > Consolidate Originals" from the main menu bar. This will move (or copy) all referenced images from the folders outside into your Aperture library.
    When you now create a vault, it will contain all images. Use this new vault to recreate your Aperture library on your new mac.  You can also simply copy your Aperture library itself to your new mac. You do not need the detour using a vault.
    BTW: Where Aperture will store the originals image files depends on the settings in the "Import" panel. Make sure the "Store Files" option is set to "In the Aperture Library".
    Regards
    Léonie

  • I have my old ipod mini and a new comp.

    how do i get my songs from my ipod to my new comp. i dont wanna erase the songs off the ipod. how do i do this? i am having alot of trouble with this

    Sorry, my fault, I didn't checked your signature, the link was a Mac Software.
    Anyway, try this:
    iGadget (shareware)
    http://www.ipodsoft.com/site/index.php?n=Software.HomePage
    iPod2PC (shareware)
    http://www.softpedia.com/get/IPOD-TOOLS/Other-IPOD-tools-Updates/iPod2PC.shtml
    or iPod2Folder (freeware)
    http://www.versiontracker.com/dyn/moreinfo/win/35148
    Hope that helps (this time)
    Cheers
    SolSat

  • I have CS5, Had on two computers, Both have been stolen, New comp and cant put CS5 on.

    I need to know how to get CS5 on my new comp, my last two comps were stolen from me and I got them back destroyed, I need to use CS5 for my collage classes but I cant use it because I have to de activate on the other comps that have it, but they have been damaged to the point of no return. I have my serial number, but I cant do anything Please help..

    You need to call support by phone and they'll manage your activations server-side.
    Mylenium

  • I have CS4 and a new comp. & printer & still when i print the image printed is an 1/8 of the size

    I have CS4 and a new comp. & printer & still when i print the image printed is an 1/8 of the size

    See this support document. http://support.apple.com/kb/TS5185

Maybe you are looking for

  • Why can i not connect apple tv to the new A&E app with cox cable?

    Why can i not connect apple tv to the new A&E app with cox cable?

  • Ipod mini wont turn on or respond

    updated to the latest itunes, transferred some songs to ipod mini, properly disconnected an ipod through itunes, unplugged. about 15 minutes later wanted to listen to ipod but it would not turn on. the screen remained blank, tried plugging ipod back

  • Color grading retimed clips???

    I retimed some clips in the project timeline, arranged them, but now I cant color grade them- Is this a glitch or am I doing something wrong ??? Thanks

  • Same GL accounts in OBYC accounting keys

    Requirement : in OBYC settings for valuation class 8621 the business needs to use GL A/c 2400.86130 for accounting key BSX AND GBB u2013 PDC as the SAP standard will not allow to use same gl account for the two accounting keys, how I can do this to m

  • Meeting place and SRST feature

    Hi all, I am new to Voice communication. So, i need help from you guys. One of my customer one to have cisco Meeting place express on their premises. Basic requirement is - i) Voice, video and document sharing ii) PSTN and PABX integration with the s