New computer - not seeing speakers for airtunes
Wasn't sure if this should go in the Airport section or iTunes section. My setup worked with old Vista machine - playing airtunes on surround sound.
Built a new Win7 64 machine, running latest iTunes (10.5.x I believe). I hooked up the Airport Express, loaded the config file and made one change - changed to WPA2 security. Updated the config and all went well. Plugged in AX and hooked up speakers. Got the green light on the AX, so figured I was good to go. When I open iTunes to select music, I don't see the option along the bottom to select other speakers. (When I say this worked on old setup, this means the AX has Airtunes checked in config file.) Thoughts? What did I leave out?
1) In first post I mention I have that checked. And to be paranoid, I've looked about 10 times just to make sure I wasn't seeing things.
2) I am running 6.3 (see third post). I am pretty sure mine is the 1st gen, no N. According to this link, I'm running the latest. http://support.apple.com/kb/HT1998
Similar Messages
-
I just purchased a Canon 7D Mark II, new DellXPS and the Lightroom 5.2. The Lighthouse is not openinging the 7DMark II but does open the older 7D that I imported. I checked the Abode update page and do not see one for the 7D Mark II. Please say it is there - if not when. I am "on hold till its done. Thanks.
Update to the current release, which is Lightroom 5.7.1. You can do this from the Lightroom help menu and choosing updates.
-
I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. -
How do I uninstall a license on a computer that broke so that I can reinstall it on my new computer? This is for CS4 Design Premium.
open a cs4 program>click help>deactivate.
if you're not able to do that contact adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Cannot sync my ipod to itunes on new computer - not enough privilege
I purchased brand new HP desktop (model M8517C) has Intel quad core processor @ 2.4ghz with 5 gb RAM. Tried to sync ipod to this new computer and worked partly for the first time and since it is not working. During the part syncing it deleted all previous data and now does not sync atall.
Error "The iPod "my name - xxx" cannot by synced. You do not have enough access privileges for this operation.
The current computer has only one log in account and so it does have administrator privileges and all privileges. I tried everything that I could think of wasting several hrs but it will not sync.
I have obviously installed the latest version of the iTunes software. The ipod is 60 GB model from few yrs ago and I dont have any warranty.
Will appreciate any help.Are you using the latest downloaded version of iTunes from Apple.com, instead of a version that came on disc with the iPod? According to this article, Windows Vista 64-bit required iTunes 7.6 or later
http://support.apple.com/kb/HT1426
Also, make sure you got the version of iTunes 8 for Windows Vista 64-bit
http://support.apple.com/downloads/iTunes8_0_2_for_Windows_Vista_64bit -
New computer cannot see cFP-2000 via ethernet
I set up a cFP-2000 block to connect via ethernet on my computer fine (directly connected, not through a network). Now I want to connect it to a different computer and I can not get MAX to see the device. I have a crossover cable from my new computer to the cFP-2000. When I open max, it will not see that there is a device connected in the remote systems section. What do I need to do to get the new computer to see the cFP unit I have hooked up? I am running Windows 2000, Labview 7.1, and Fieldpoint 4.1.
SteveOk, still no luck. Here is what I have tried:
Assigned the exact same IP address to the new computer as the first computer.
Also tried just obtaining automatically.
Assigned the same subnet mask (255.255.0.0) to the new computer as the old computer (and same as Fieldpoint).
Tried playing with the network port changing the duplex settings.
Tried using a hub to connect. The hub worked if I tried to connect to the first computer that I set up the fieldpoint on, then it wouldn't work with the new computer.
When I connect the ethernet cable from the new computer to the cFP-2000, I don't get any lights.
I am pretty lost as to what is going on here. I have no problem connecting to the cFP-2000 when I have it hooked up to the computer I first configured it on. Then when I connect it exactly the same way to a new computer, I can't see it in my remote systems and there are no green or yellow lights on the FP ethernet connector.
Steve -
How to transfer/sync my iPhone 4 music/photos etc to my new computer - not connected phone to computer at all yet.
Computer has Windows 8SEARCH!
http://lmgtfy.com/?q=migrate+iphone+to+new+computer -
We don"t use itunes very often, but when we do there alwys seems to be a new version to down load. We just get used to the old one. Now with the new computer we wanted to download the new version and transfer our old songs. I'm missing all the old albums I purchased last year and the year befor. How can I get these valuable products back?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Downloading previously bought apps onto a new computer - Not working
I just bought an iMac and I expected to be able to re download apps I had already bought in the App Store.
When I open the App Store Application I see the list of all the apps I have got through the app store and some of them show as being available to install and some of them show as being installed and are greyed out.
I can't download them fresh onto the new computer.
For example I have bought Hype - I tried copying the app across from my MacBook to the iMac and putting into the apps folder. Click on it to start the app and I see it briefly in the dock and then nothing. It is not running. I just tried it again and same thing but I got a dialogue to say I bought it on another machine and a request to log into my Apple account. I filled in that dialogue and the Hype app still refuses to run.
after filling in the password and clicking on Sign In - I still can't run or re install the app.
Same with Vector Designer, Smart Converter
Then there are other apps I have brought across and they are working such as iProcrastinate, Calendar,Alfred and Resize it.
Anyone have any suggestionsQuit the App Store.
Launch iTunes on the new Mac. From the menu bar click Store / Authorize This Computer
Then go to the menu bar and click Store / Sign Out.
Relaunch the App Store.
Note: To download previous purchases on a computer, your computer must be authorized for the Apple ID that was used for the original purchase. For more information about iTunes Store authorization and deauthorization see, this article.
From here > Downloading past purchases from the App Store, iBookstore, and iTunes Store -
ITunes on new computer not reading MP3 tags
I have transferred my library of MP3 that were ripped from CD from my old computer to my new computer, and many of the files do not show the album name or artwork, etc. in iTunes. If I look at file properties in Windows, however, all the information is present for the MP3 - album, artist, etc. I have found that there is a field called "Encoded by" and is says "iTunes 11.0.2.26", or some other is an older version of iTunes. If this iTunes version is older than the latest version of iTunes on my new computer, then iTunes does not read the MP3 tags correctly. If I manually change that iTunes version in Windows to the latest iTunes, then that file is fixed!!!
My question is, what is the fastest way to make this change for all the files that are showing old info in the "encoded by" field? The files are all buried in various artis->album folders in the music folder, and I can't see any way to change this field from iTunes, I can only do it from windows explorer. If I could do it in iTunes it would be fast because I could group all the bad files together, select them all, and change them in one step.
Please help! I am close to fixing it!Are you using the latest downloaded version of iTunes from Apple.com, instead of a version that came on disc with the iPod? According to this article, Windows Vista 64-bit required iTunes 7.6 or later
http://support.apple.com/kb/HT1426
Also, make sure you got the version of iTunes 8 for Windows Vista 64-bit
http://support.apple.com/downloads/iTunes8_0_2_for_Windows_Vista_64bit -
Airport Extreme Base station does not 'see' Airport w/Airtunes. HELP!
I just purchased and installed an Airport Extreme Base startion (802.11n), and it does not 'see' my Airport Extreme with Airtunes. I have already tried re-setting the Airport + Airtunes to the factory settings, but since I installed the new Base station software, I no longer have the Airport Express Sett up assisstant?!?
What am I doing wrong?Your Mac won't be able to communicate with your Airport Express until you reconfigure your Airport Express to join the wireless network now being created by your new Airport Base Station.
The "Airport Setup Assistant" has been replaced by the "Airport Utility". You can find that new utility installed in your Mac's Applications->Utilities folder.
What you should do now:
1. do an factory default reset of your Airport Express.
2. plug the Airport Express (temporarily) into power in the same room as your Base Station and your Mac.
3. on your Mac, run the Airport Utility. It should "see" your Airport Express. Click on the Airport Express icon, click to continue (your Mac will switch wireless networks temporarily), click Continue, and follow the instructions for configuring the Airport Express so that it "joins" the existing wireless network created by your Base Station. -
My new computer build, good bang for the buck?
I'm just starting out with CS 5.5, need a new computer, and want a solid base for upgrading as I go. I think I'm on the right track but uncertain of the video card.
Intel 970 six core
Asus Rampage III 1366 X58 ATX
MSI Lightning GTX 580 3072MB
Asus PA246Q 24''
#3 (total 24GB) G. Skill Ripjaws 8GB (2x4GB) 24O-Pin DDR3 1600 (PC312800) F3-1280CL9D08GBRL
#6 Samsung F3 3.0 7200 32MB
Corsair Series Gold 850 WAtt Power Suppy
Antec Kuhlen H20 920 CPU Cooling System
Logotec 500 corded mouse
Logetec corded slim line back lit
Lain Li A77F case
I'm uncertain if the GTX 580 3GB video card ($475) is overkill? The other options are GTX 570 2.5 MB ($375) GTX 560 2MB ($225)
I've read all the reviews but there are mostly gamers who have more than one card.
Will the GTX 560 2MB be good enough? It's appealing because of the 2GB and the $225. If this could work for the next year few years then the GTX 580 may be down to $200. I just don't have much experience with video processing, how many layers I'll be using, etc. Or are all of these poor choices because they don't have the copper tubing?
When I upgrade I'll add a RAID card. For now I'll just start with the 6 Samsung and use a few for backups as I go along. Maybe I'll need to order more or another external back up sooner than later. Hope that makes sense. My approach is to get started then upgrade. I don't need to win any bench mark test but want a computer that's reasonably fast, upgradeable, reliable and have a long life.
Oh yeah, I had no idea about the keyboard and mouse so just went with a wired one as it will be on a desktop.
So does this look like a well balanced approach? Does anything look excessive or insufficiant?
Thanks for bearing with me. This forum has been a great resource! Of couse you recognize the parts from other recent builds. I've been doing a lot of reseach and really looking forward to getting this together.
thanks again!
John CYes, Frederic, some of the parts should look familiar! Your approach was really interesting how you were concerned about cooling and air flow. I actually had ordered most of it, including the MB, kayboard and mouse, last Thursday, then decided to go with the same case instead of the Half X and the CPU cooler, so I'm really glad you posted your system when you did.
Really appreciate the feed back. As far as what codec I'll be using, I suppose the ones that are the most versatile and most often used. I would like it to be capable to handle professional work standards yet not overkill. Do most editors use native and a codec for ACHDV? I was planning on the AVID codec and probably the CinaForm. A week ago I was put off by spending $100 for a codec but now that I'm configuring the hardware that might be a good option. I just don't know how to put all this into perspective until I get a real idea of the work flow; if it will save minutes or hours off the edit time.
I was confused about the disk performance. Thanks a bunch for pointing that out. I must have misunderstood some of the post, as I was under the impression that the SATA II disk 3.0 32 mb exceeded the throughput of the SATA connection, however you are saying that’s not the case with a RAID card, and that the RAID card with a decent disk set up would be best approach to improve the performance as opposed to more VRAM on the video card.
I am planning a good raid configuration in the near future so will get the SATA III. It's nice to be able to upgrade like that. I also want a good RAID card and the RAID will be also for redundancy. I may even have to go with a 10000 RPM primary drive like yours as those appear to be a nice boost. I planned to start off with 4 disk set up with a few disk for backups and ordered 6 disk. I was going to look into that next and didn't even realize the SATA III was on the MB. I'll probably be shooting a lot just to learn how to process the video, and once I start processing quality video I'll upgrade the RAID and backup.
Ok, off to see if I can cancel the Samsung order, gotta love Amazon for that.
Have a great day and thanks again! -
Can anyone provide more specific info when transferring iTunes to new computer. i have completed all steps including the ones ive seen on the forums since others have had same issue. Uninstall iTunes. Reinstall iTunes. Check synch all music uncheck synch all music...When I try to sync with new computer it transfers music, some go into downloaded songs only, if i connect to old computer its better, and then there is the new cloud! I am regretting changing computers but it was time. any suggestions would be greatly appreciated. I just want my iPhone 4S 64g to synch correctly and completely.
It is probably best to start over. These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2 -
Transfer iTunes library to a new computer not working
I have authorized my new computer as stated in the apple support docs but not all songs are coming over. Only 21 of my 200+ are making it over....I get an error that says "some items could not be transfered b/c they are not authorized...please authorize this computer..." repeat, I have authorized the new laptop. All songs were purchased legit on iTunes, no imports or pirated media. Can someone please help?
Well, I had an AOL account for iTunes before Apple forced you to get an Apple ID when buyin an iPhone. Would I need to transfer under that account?
-
I got a new computer for home and I am trying to transfer all of my music, movies, photos and apps from my IPAD. I have been using my work computer ofr this in the past but want to change to my new home computer. I can't figure out how to do this without erasing everything from it.
This is an extract from one of our senior participant; hope he doesn't mind me reproducing it here
Syncing with new computer
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
Maybe you are looking for
-
Questions about PO creation / update / cancel interfaces
Hi there, An E-Business Suite 11.5.10.2 customer wants to use the 11i PO creation / update / cancel interfaces in order to manage Purchase Orders created from a 3rd party system. I've been through the 'Oracle Purchasing Open Interfaces' guide (115mfg
-
Itunes can't see my backups/backup not working properly
For some reason my copy of itunes does not seem to back up properly. The back up seems to run but then I can't see my backup under the preferences/devices tab. I have a PC It is an iphone 3G I have reinstalled itunes following apples instructions. It
-
I have a brand new mac book pro and suddenly I have a pixelated huge red diamond that showed up centered on my desktop. What is it and how do I get rid of it.
-
Exception: Call of execute(String) is not allowed for PreparedStatement
Hi all, This query was run fine on SapDB 7.4 from Jave code using prepareStatement() method: declare id11216053819634 cursor for select sc.name, measuredobjectid id from serviceconditions sc, measuredobjects mo where sc.collectionid = mo.collectioni
-
Hi, I have a small problem with our Asset Inventroty, I have run a report on MS Publisher installations, since then we have removed Publisher from many machines but these are still appearing in the report as having Publisher installed. Our machines a