New Computer with the P965 Platinum

Hello. I'm new to computer building. I'm tired of Dell. I just ordered the following setup:
1 Thermaltake Bach VX Mid Tower Computer Case
1 Thermaltake Purepower 600W Power Supply
1 MSI P965 Platinum Motherboard
1 Intel Core 2 Duo E6700
1 ZALMAN 9700 CPU Cooler
1 Mushkin eXtreme Performance 2GB (2 x 1GB) DDR2 SDRAM DDR2 800
1 EVGA GeForce 8800GTX
2 SAMSUNG 500GB 7200 RPM SATA 3.0Gb/s Hard Drive
1 SAMSUNG 18X DVD±R SATA DVD Burner
1 ASUS Black SATA DVD-ROM Drive
1 Microsoft Windows Vista 32-Bit Ultimate
Did I screw anything up? I was wondering if I will be able to assemble the computer and have it boot the first time. Or should I expect problems? Does anyone have any insight or wisdom for me as to what I should expect?
I had a few specific questions:
1.) RAID0 configuration: Is there more than one RAID controller? If so, which is better?
2.) Windows Vista (32 bit) installation: Is there anything I should do before installing Vista?
3.) Overclocking: After the dust settles I want to mildly overclock my CPU, GPU, and RAM. Does anyone have any recommended overclock settings or links on how to do this?
Thank you.

Why overclock? Mainly because of intellectual curiosity and because faster is better all else equal. It's like Spinal Tap - I want my volume to go to 11!
Thanks T_smith for the overclocking how-to, but it appears my BIOS options on the P965 are different that yours. I will start a thread in the Overclocking forum.
My computer runs great and is fast. It's been quite a learning experience so far. You guys have been a lot of help. Thank you.
I created a bootable USB drive (definitely good to have around) and flashed the BIOS to 1.5b3.
At boot time, the computer beeps once for every USB device that is plugged into the computer. Is there a way to disable that beep in the BIOS? I have a USB mouse and keyboard and it's a bit annoying to listen to the beeps.
I installed CPU-Z. I got a scare to see my CPU idling at 1.6 GHz instead of 2.67 GHz (6 multiplier vs. 10 multiplier). Then I realized it was completely normal because of Intel SpeedStep.
I installed MSI DualCore Monitor, nVidia nTune, CoreTemp to monitor my temps.
Here are my temps:
Closed case (messy wires still)
- GPU 68 C
- System 40 C
- CPU 34 C (CoreTemp & DualCore Monitor) vs. CPU 40 C (H/W in BIOS)
Does anyone know why the CPU temp measurements differ so dramatically? SpeedStep?
If I take the side panel off the computer, all temps drop 3-5 C.
I noticed that HDD write cache is disable by default. Do you guys think it's worth enabling? It's a performance vs. data protection question. I don't mind a little data loss in the event of a power failure, but I don't want the OS to become permanently unstable.

Similar Messages

  • Hello, I got a new computer with the old harddisk. Can't play my itunes music because not authorised. Apple ID is very old e-mail adress that doesn't exist anymore. When chose for secret question brth date seems wrong. Can't reach anyone!!!

    Hello, I got a new computer with the old harddisk. Can't play my itunes music because not authorised. Apple ID is very old e-mail adress that doesn't exist anymore and I forgot the password (5 years old??). When chose for secret question birth date seems wrong. Tried everything. I need to make a new apple-id but cannot connect the music that I bought under my old name to my new name. Can't reach anyone!!! Automatic FAQ system is of no help. What to do?

    That doesn't help me. For itunes it brings me to the express lane which doesn't help because my case is not in it. It's all standard procedure things. I understand those but my situation is different. The combination of a passport forgotten and an non-existing email adress (and birth dates that are not correct or not accepted). What I need is my password emailed to another email adress than the original one because that no longer exists.

  • New Computer with MSI 925XE Platinum(MSI-7053)

    On Wednesday June 14th after a 10 month delay I picked up a custom built computer built by a fellow worker
    it has an Intel 775 processor running at 3.0 GHz, 1 GB of Geil 533MHz memory, a 160GB & a 250GB Western Digital HD the 1st is IDE & the 2nd SATA, a Sony DVD-ROM & HP DVD 640i lightscribe optical drives both as RAID 0
    & it has Azailia\AC'97 sound with Windows XP Professional OEM Edition
    when I started it up I noticed it was as mute as Sheilds & Yarnell mimes that was hot during the mid '90's
    also I also noticed that because of the 11 in 1 card readers I noticed that instead of the main drive being the usual C:\, it was configured as I:\ this drove my programs totally bazoo because the apps were looking for the traditional C:\ so at first I reinstalled XP figuring it would give you the option of reconfiguring the HD as a C:\ but when it was status quo I took out the Western Digital setup prgrams and reformatted totally wiping out the RAID as good as the bug spray its named after
    I have 2 questions
    a. how does one either revives the RAID?
    b. how can you reconfigure both drives as C:\ & D:, the opticals E:\ & F:\
    and the card readers G:\ thru N:?
    c. how can you make the Azailia 7.1 sound chip work with my primitive(in comparisom) 2.1 set up?
    I have absolutely no room in the room for all those speakers!
    since this is my 1st custom built machine I'm a virgin like Madonna(the singer)!
    any help would be truly appreciated by a person who's "Sgt Schultz" in this
    Thank You
                                                                            Ken Greene aka spacechild

    "Houston we finally have a computer!" on Tuesday night after the revival of my new Screamin Meanie machine I finally figured out how to get it to sing. unlike my old HP Pavilion 7965 PC which has merely one jack there's at least 5 or 6 jacks to the Azalia and that's why I was throughly bazoo so I noticed the out to speaker jack so I decided to try it and that was the solution. granted there's still a few bugs that Raid(vs. RAID) didn't kill like the SM Bus driver couldn't be installed or the Wireless 54 g didn't work(that's because Philly didn't get to my part of the city with its well propagandized free internet program yet) or the fact that it's deep inside the room near the door, but I can live with it and the configuration the builder dealt my computer. at least until I have to give it an enema to resusitate it.
    then I will do it my way according to your help.
    Thank you very much. you guys have saved me from wasting 4 figures from a 2nd PC croaking prematurely like my 1st one a 1994 model Packard Bell Legend 1956 which sent me to he double hockey sticks when to eliminate it going on a monthly hissy fit I did an "Oscar Goldman" putting in around $1,700(this one cost $1,600) rebuilding it and then it died because I was trying to put in a tape backup program which wasn't compatible with the new parts and the master recovery CD's didn't work for the same reason.
                                                                                 Ken Greene aka spacechild

  • HT202213 How do I set up Home Sharing to authorize a new computer with the newest version of i-tunes??

    I have the newest version of i-tunes and cannot for the life of me figure out how to set up home sharing to authorize a new computer! Everything I find on the subject is for older versions of i-tunes. PLEASE HELP. Thanks

    Ok I found it. Alt S to get the top navigation menu!

  • Imovie 06 wont play on new computer with the upgrade to 08

    I created a slideshow movie in imovie 06, and then burnt it to a dvd using idvd 06. Now my friend wants to view it and the file wont open on her computer (using the ilife 08 suite). Does this make sense? is there a work around?

    Hi
    Use iMovie HD 6 (6.0.4)
    • iMovie HD 6 (6.0.4) : http://www.apple.com/support/downloads/imovieHD6.html
    and update QuickTime too
    Yours Bengt W

  • The computer I originally started using iTunes on a few years ago is no longer functional. How do I make the same library appear on my new computer with the newest iTunes?

    The computer I originally started using iTunes on a few years ago is no longer usable, but for some reason some of the songs I have now are not showing up in my library on the new laptop I just bought. How do I consolidate the total songs on my iPhone to include them all in a new library on my iTunes in this new laptop? And why isn't this new laptop letting me update to ios 6 without deleting everything on my phone?

    Your music will ONLY be where you put it.
    It will not magically appear anywhere.
    You buy one and only one download.  it is your responsibility to move/copy/backup your music.
    You need to copy everything from your old computer, or your backup copy of your old computer, to your new one.
    Leaving your e-mail address on a  public forum may not be wise.

  • My new computer with the newest firefox in not remebering passwords?

    I have a new Dell 8300 desktop and installed the new Firefox. It is not prompting me to or remembering passwords. I have it set to remember passwords but it doesn't work.

    I was in private mode.
    I had switched to "Never Remember History" when I first went through it
    I will launch Firefox again and see if I am still in private mode.
    I think I had to open it up and accept cookies and just let Kaspersky and IObit sweeper keep the system clean.
    I don't remember seeing those settings. Maybe they were not available because of the Never Remember, of maybe I just missed it.
    Thanks for the help!
    My computer is asking me to remember the password of this site!
    Thanks. GC

  • I have purchased a new computer with Windows 8.1 and the old computer had Windows Vista  and was very slow.   I need to uninstall Adobe Creative Suite 3 and put it on the new computer.  Is this possible and what do I need to do?

    I have purchased an new computer with the Windows 8.1 OS.  The old computer had Windows Vista and is just about to quit working altogether.  I wish to uninstall it on that computer and deactivate it; so that I may install the software that I purchased (some years ago, but hardly used) on my new computer.  Is that allowed and do I have the right idea about doing it?  I have the serial number
    and all that with the software.

    Download CS3 products
    Mylenium

  • HT1386 I have sync an ipad with a new computer and the photos have been transfered into files with no extensions. I can view them on the ipad but canot view and delete from the computer.

    I have synced a new computer with the ipad and the photos have been transferred as a file with no exstention. I cannot view them on the computer but can on the ipad.

    Well I forget the exact keys, but believe pressing and holding down CTRL before clicking Restore will allow you to browse and find the backup file (may be wrong).
    In the end, as far as the iPhone thinks, it is a new computer so it will erase and resync stuff and as long as you loaded everything back into iTunes all should sync back. Main issue is other stuff like the data within the apps, notes, etc that are part of the backup which is why you would want to try to restore from the backup. If you don't mind losing data in apps (eg: do you care you have to relog into some apps and start over, don't care about game scores, etc) then you don't have to worry about the backup. If you have important data in some of those apps then you will need to restore from the backup.

  • How to transfer Garage Band to new computer with all selfmade stuff

    I just got myself a new macbook pro with of course garage band preinstalled.
    I transfered all my .band projects from my old macbook and the loops i made too.
    i put the loops in the same directory as they were on my old macbook hd/library/audio/apple loops/user loops/ but garage band didn't find them so i manually mooved them into the loop browser in garage band.
    only problem: i have to mark them all as favorites again and whenever i open an old .band project for the first time gb has to search for each one again.
    can you tell me how to do it better next time?
    but now to the more important and current problem:
    where do i find my selfmade software instruments on my old macbook and where do i have to put them on my new one?
    and is there anything else i might need from my old gb that i didn't think of?
    thanks,
    paul

    The best way would have been to use the Migration Assistant - it would have moved your whole user folder and your personal stuff over to the new computer.
    About the instruments: There could be two Instrument Library folders, under HD/Library/Application Support/GarageBand and User/Library/Application Support/GarageBand (depending on whether you made the instruments available to all users.) If the other GB is a standard installation of the same version, you can just replace the folders on the new computer with the ones from the old machine, and all your instruments should be there. (The "if" refers to the fact that by doing this you lose all custom instruments you might have made on the new computer.)

  • New Computer with Upgraded Software

    I have a new computer with the Photoshop and Premiere Elements version 11 installed.  On my old computer I was using Photoshop version 5 and Premiere version 3.  I am able to backup my tagging in the organiser, but it simply won't import into the new version.  Do I need to uninstall version 11 on my new computer, upgrade the old computer and then somehow transfer this to the new computer for everything to work properly.

    From PSE6 onwards a different database was introduced. But it is possible to convert the catalogs from earlier versions and even from the very old Photoshop Album software. The Photoshop Elements Organizer is now called Elements Organizer as it is shared by both PSE11 and PRE11.
    http://helpx.adobe.com/photoshop-elements/kb/common-catalog-issues-upgrade-elements.html#m ain_Diff_Elements345
    There is no need to uninstall from your new computer. There are two possible methods depending on the number of files you have.
    (1) Install another copy of PSE11 (not PRE11) on your old computer (you are permitted two installations) and during installation agree to upgrade your old catalog. You can then use backup and restore if you have an external hard drive. The back up from the PSE11 organizer on your old machine will make a physical copy of all the image files and the catalog (your tags and collections etc) although I’m not sure whether collections get converted to albums. When the back up is completed you launch the PSE11 Organizer on the new PC and  start the restore process.
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
    (2) If you are only interested in preserving your tags, you could select all the thumbnails in the PSE5 Organizer (Ctrl+A) and from the File menu choose:
    Write Tag and Properties Info to Photos
    Wait until PSE5 completes writing the metadata and then copy all your pictures folders to your new PC. Then use File >> Get Photos & Videos >> From Files & Folders and agree to import all suggested key words etc.

  • Find serial-number of PSP El.12 on new computer with incl. software

    I bought a new computer with the Software Photoshop element 12 included. Now I want to register the software with my Adobe ID but I have no serial Nummer.How can I find the serial-Number on my computer? Thank you

    The serial number is not visible anywhere in PSE, at least not the whole number. You need to contact whoever loaded PSE onto the computer, if you didn't also get a disc, in which case the number is usually on the paper sleeve.

  • I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

    I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

    Install disk drive from old computer in an external enclosure.
    Then copy the complete iTunes library from the disk drive to the disk drive in the new computer.

  • How can I sync my ipod 6g. to a new computer with out losing all the info

    My computer is starting to fail so I bought a new one. How do I sync my ipods they are 6 gen to the new computer with out losing all the data that is on the ipod?

    Was your iPod previously set up to Manually Manage (where you dragged/dropped the music) or was it set to auto sync (where it started sycning as soon as you plugged it in.)?
    If it was set to Manual, you have no worries. Just continue on your way.
    If it was set to Auto, you will have to transfer your purchases or redownload them from the iTunes store.
    You're either going to have to get the other music back from the websites/CDs you got them from before or find an iPod ripping software program that will do it for you.

  • How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4?  And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?

    How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4?  And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?
    My 3GS is dying and it's synced to an older computer.  I have tons of datafiles as well as apps, music, text messages, etc. that I need to get moved to the new iphone4 I'm getting.  Then I need to move the sync to a newer computer so that I can sync the new phone and new computer.
    I understand how to get my apps to transfer to a new pc.  That's not the issue.  It's getting ALL the data from the 3GS to the 4 and then to a new computer.
    Thanks.

    Thanks much, that's very helpful for step one (getting old phone onto new phone).  Very clear. 
    However, I still have the problem of moving to the new computer.  How do I move the sync to the new computer after the new phone is set up?

Maybe you are looking for

  • Need the user exit/BADI name to display the error msg in PO for net price

    Hi I have the below requirement. While creating the PO(Purchase Order) with reference to PR(Purchase Requisition),if the net price value is 0.01 USD then the system will display a pop up a error message that 'This is a free price for PR'. Can anybody

  • AirDrop between iPhone 5 iOS 8.1.2 and iMac Yosemite 10.10.1 only working if both have Everyone for AirDrop discovery

    AirDrop between iPhone 5 iOS 8.1.2 and iMac 5k Retina Yosemite 10.10.1 is only working if both have Everyone selected in AirDrop discovery options. If the option is set to Contacts Only in one of them then neither device can see the other. Is there a

  • Why does this impossibly simple CIN crash?

    I've been struggling for a few days trying to get this other CIN of mine to work. I decided to give up for now, start from scratch, and see why nothing's working. I created the attached VI and C File, and gave it a try. I'm using LabVIEW 7.0 on Windo

  • IDOC processing report

    I want to development a report, part of the report is to find out if some is modifing an IDOC (if it has been loocked by the user). How can I do it? Can i use FM "ENQUEUE_ES_EDIDOCE" to do it? Try to lock the idoc again using the FM. if SY_SUBRC = 0,

  • Error "object expected" w/ SWF in HTML

    My Captivate 4 SWF file runs fine in my Flare Help page, until I click off elsewhere (not within the movie) I get an error message about an Object expected on line 53. When I remove the SWF demo (or insert an old RoboDemo SWF) I get no error msg. Sea