New Condition type of freight on basic+excise duty

Hi experts,
I have a requirement of new Condition as "State Freight" which will be calculated on basic + exciseE.CessSECess.
Request you to send complete steps for the same.
regards,

Hi,
Tocreate a new condition, go to tax procedure, select tax code ,create new condition ("State Freight"). Write a coding,  which should  calculate on basic + exciseE.CessSECess .This taotal should reflect into the condition State Freight. This program needs to assign to condition. The need of writing code is not to disturb the standard schema. I hope it will resolve your issue. Thanking you.

Similar Messages

  • New condition type for freight

    hi,
    i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will trigger

    hi,
    as you have to have three condition types for sales order
    ROAD - VENDOR1 - ZVE1
    RAIL - VENDOR2 - ZVE2
    ROAD - VENDOR3 - ZVE3 - into sales order.
    create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
    with
    LEG 1 - ROAD - VENDOR1 - ZVE1
    LEG 2 - RAIL - VENDOR2 - ZVE2
    LEG 3 - ROAD - VENDOR3 - ZVE3
    create a Z table which captures the information for this.
    and link this table to FB70 - t.code
    and settle it individually as per FFA.
    balajia

  • Condition Type for Freight

    Hi,
    I have created a new condition type for freight.
    Now i want that whenever i use that condition with value 100 Rs  in PO with qty 100,and while taking 50 qty for GRN that freight amount should be fixed.
    It should not vary as per GRN quantity.
    So anyone pls suggest related settings for condition type as well as Pricing Procedure.
    Waiting for reply.
    Regards,
    Rahul Patil.

    hi rahul,
    I had tested in my system and frieght value is not varying.
    I have Created a ZFRT conditon (assign the access seq.) in which,
    Cond. class - A
    Calculat.type - B
    Cond.category - B
    assign the value 100 INR in condition master via MEK1 transction.
    then i test it.
    If I raise PO for 5 item or 10 item, i'm getting the 100 INR as freight amount.
    regards
    S Anand

  • Pricing: New condition type not getting listed in options in product master

    Hi,
    I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this  condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
    Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
    Regards,
    Meenakshi
    Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
    Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AM

    Hi Meenakshi,
    you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
    Best Regards,
    Michael

  • Creation of new condition type: MWST

    Hi, Everyone.
    I would like to ask for some help regarding this issue: Creation of new condition type: MWST with the following details:
    1. For the country French Polynesia, Create a new VAT condition of 10%.
    2. Create a new one called : Class : Z u2013 Designation : France : TOM corresponding to 10 % of VAT to be invoiced
    and then associate this new VAT code u201CZu201D to the applicant Nr 221860
    If you could provide me a step by step process on how to resolve this, it would be very much appreciated.  Thank you so much.

    Hello
    What type of condition type you want.
    It is always advisable to create a new conditon type copying a standard condition type.
    For gross price condition types select PB00/PBXX
    For freight charges, Copy FRA1/FRB1
    Regards

  • Addition of new Condition type in SO

    Hi Frnds,
    We are facing a problem in SD.
    Client has added 2 new condition types 'JEC2' and 'JSC2'  recently which was not defined in previous conditions in old sales order
    hence while copying old SO to new, these 2 fields were not getting added in new SO . They have made following
    setting in SPRO for these 2 condition types to solve the problem :
    SPRO -> SD -> Basic function -> pricing -> pricing control -> define condition type.
    in this, for conditions JEC2 and JSC2 change condition category to 'L' (i.e.. New when copying ).
    This solved the problem while copying the old SO( Which doesn't contain the new Conditions)  to new.
    (i.e.. 2 new conditions are added in new SO due to setting 'L').
    But while copying New SO ( which already contains these 2 conditions) to another,
    the above 2 conditions are duplicated. (i.e. appears twice in conditions tab of item, once from source SO and 2nd time due to setting 'L' of 2 conditions ).
    Kindly revert back if you find any solution for the same.

    Hi there,
    You are getting the duplication coz of setting L (generally new when copying) in condition catg in V/06. In your earlier case, it worked because the condition type is not defined in the old order from which you are copying. So setting L will define new in the new order. 
    In your second case your old sales order already has the condition type JEC2 & when you copy that sales order, system will copy all the existing condition types + re-define JEC2, JSC2 again (coz of setting L in condition type) in the new order.
    Rather do this. Since you are copying new OR from existing OR, in copy control routine VTAA at the item level, pricing type, choose option B which will carry new pricing. With that eventhough your old order doesnot have JEC2 & JSC2, your new order will have them.
    Regards,
    Sivanand

  • New condition type

    I created a new condition type 01ZF for freight % and assigned it in the calulation schema 0100. It also appears in the drop down while creating an order but does not get saved when selected.

    Hi
    Which SRM version are you using ?
    <b>When this Condition type is not getting saved ? What are the steps you are doing ?</b>
    <u>Meanwhile, Please go through the following SAP OSS Notes and Business Add-Ins(BADIs) which will help -></u>
    Note 640369 - Incorrect values in dropdown in account assignment details
    Note 1027656 - Simplified pricing:wrong price calculation in SC using prod.
    Note 1038241 - Simplified pricing: Follow-on note to note 1027656
    Note 1034949 - Wrong price in SC when a product has multiple conditions
    Note 539720 - Simplified pricing (classic scenario)
    Note 637562 - Simplified pricing
    <u>BADIs -> </u>
    1) BBP_PRICEDATA_READ
    2) PRODUCT_UPDATE2
    3) PRC_PRICING_INIT
    Note 622282 - EBP 3.5 - price is lost in the Shopping Cart
    <b>Related links -></b>
    <u>Pricing</u>
    http://help.sap.com/saphelp_srm50/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/frameset.htm
    Do let me know.
    Regards
    - Atul

  • New condition type, new tax codes

    Hi,
    I have created new condition type for tax procedure TAXIN. I have defined the account key for it. The condition type is basically for exempted input tax transaction. Then I created new tax codes by using the new condition type. The percentage of the tax codes is 0 as it is exempted.
    When I am trying to post invoice by using above taxcodes, it gives me error that the tax code is not defined in taxprocedure TAXIN.
    What could be the reason?

    Did you create the tax code in the development or prouction system?
    If in development you need to export the tax code by going to FTXP and selecting Tax Code -> Transport -> Export. Then when you release the transport you should go to the Production system and select Tax Code -> Transport -> Import.

  • Create a new condition type for tax... and assign in the Tax determniation

    Hi,
    I need to add custom condition tax type, i tried creating the condition in OBQ1 and add that condtion in FI pricing OBQ3, now I want to confirm what is basic conept means whenever we create on condtion in OQB1 and add in OBQ3.
    i need to add that in Sales order and need to maunally populate that in the sales order.
    could anybody suggest to create a new condition type for tax.(full process).
    Thanks
    shankar

    Hi,
    Goto the T.Code "V/06".Create one new "Z" condition type.
    Maintain the Condition Class as "D(Taxes)".
    Calculation type as "A(percentage)".
    Cond. Category as "D(Tax)".
    Select the tick mark for "Group Condition" if it is applicable for you.
    In the next step assign this condition type to your pricing procedure by using the T.Code "V/08".
    Also maintain access sequence by using the T.Code "V/07" and assign it to your Condition type.
    Now this condition type will appeared in your sales order after maintain teh condition records.
    Regards,
    Krishna.

  • Sales order - new condition type - account assignment

    Hello all,
    we need to create a new condition type for sales order. I know that this is the path to go in SPRO:
    IMG - Sales and Distribution - Basic Functions - Pricing -Pricing Control - Define Condition type.
    Also I have to assign it to a pricing procedure.
    Now my question is, how can I determine an account (like a GL account) where the money goes when using this condition type? Background is, we want to create a sales order on a WBS element and there is no condition type available, so we want to create a new one. So where or how can we determine the account?
    Thanks
    Anne

    The effect I would say is that you have to understand the business requirement in terms of how complex your account determination needs to be. For example, in current company I am with we only use two tables - C003 and C005. System looks at C003 first, if no entry it moves to C005. So, for applicable cases in C003 where we want to trump account determination in C005, we have entry that does reference account key from the line item of the condition type in the pricing procedure.
    Last client I was at, we had 8 tables referenced in account determination. Very complex and specific in certain circumstances. Lots of well thought out logic in diagrams first and then the account determination in the system was completed. Revert back if you need more.
    Thanks,
    Jay

  • Issue with new Condition type..

    Hi,
    I want to create a Condition Type for VAT %, where we can insert value like...
    5% on 60% of Basic Price OR
    3% on 70% of Basic Price OR
    1% on 80% of Basic Price
    Note: - We have try with New Tax code and it's working... But through it, we require mew Tax code as per change condition..
    That's why we require a Condition Type for variable %...
    Please guide...

    Hi,
    You can do this through two ways.
    Option 1
    Add new condition type in tax procedure and  Make access sequence say with doc type and tax code.
    So for old PO's make the variable condition as 100% and for the new ones you need to create that many tax codes.
    Option 2:
    Write a routine for alternate base that is to be attached in tax procedure. Make a condition type in MM pricing procedure that is statistical and calculates value on base price.  Read this base price in the routine. So with this you will not make that many tax codes.
    Regards
    Sangeeta

  • Creation of New Condition Type

    Hello SAP Folks,
    I have one issue related to pricing. See the case is i have to produce an extra cost in the Sales Order which is actually depended
    upon the net price. This condition type is percentage based and calculation works in the following way:
    Let the new condition type be Z123 and Net price be PR00.
    So for year variation 1-2 year, the condition type Z123 will be 1.5 times of PR00
                                      2-3 year, the condition type Z123 will be 2.0 times of PR00
                                      3-5 year, the condition type Z123 will be 3.0 times of PR00
    Can anyone throw light on how to configure this condition type ???
    Regards,
    Sarthak

    Hi,
    For Z123 Condition type make (V/06)
    Cond. class A Discount or surcharge
    Calculat.type A Percentage
    Plus/minus A Positive
    and all other settings are same as Discount condition Type
    For making Z123 customize an Discont Condition Type (EX:K004,)
    Then while creating the condition record give the percentage as 150% 1-2 yearin valid from and to date,
    give the percentage as 200% 2-3 yearin valid from and to date, give the percentage as 300% 3-4 yearin valid from and to date, and save the record. (VK11)
    In the pricing procedure For step z123 condition type from which you want the % that is step of PR00 should be mentioned in the FROM and TO column.(V/08)
    This will result as per your requirement

  • Sales Order creation of adding new condition type to Item

    Hi Expert,
    The sales order has been created and need to add new condition type (Z601) to the first item(10). While adding the condition I am getting warning message like
    "Item 000030 exists already; the entry will be ignored".
    Where item 030 will be the last item.
    I have cheked but it's a standard report SAPFV45P, we can't modify. Please let me know can we set any field in the sales order so that we wont be getting this message.
    Regards,
    Mahesh

    Hello,
             If you would like to add the Condition Type automatically for a specific Item based on some condition (Lets say, Item Category), then you can code a Pricing Routine in VOFM Transaction and it will be automatically assigned.
    Thanks and Regards,
    Venkat Phani Prasad Konduri

  • New Condition type for pricing

    Hi,
    I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
    How to proceed? also, this contion type to be inserted in pricing schema??

    Dear Smitha,
    You may ask what is the condition type?
    For example:
    - discounts, surcharges or tax taxes add to net price
    - delivery costs, cash discounts add to effective price
    Discounts or surcharges may be percentage based, quantity dependent, or absolute.
    Best Regards,
    ian, Wong Loke Foong

  • New condition type print preview time out.

    Dear all,
    I am a ABAPer.
    I am facing one problem in PO Print preview.
    My MM consultant defines one new condition type-ZPF5 .
    Instead of ZPF2 we are using this condition type- ZPF5.
    After that in PO ,Net value & everything coming fine.
    There is a smartform also related to this.
    I have added all logic related to ZPF5 .
    But when going to print preview In production & clicking on print preview,
    It is giving time out after 9-10 mint-Time out for ALL po,not only for this condition related .
    v_no = &SFSY-JOBPAGES& -1. "in this line.
    &SFSY-JOBPAGES& means " Total number of pages in the currently formatted print request.
    I saw M/08 - ZPF5 Print equal to 'X ' & Statistics is ticked for this.
    But when I revert back old SMART FORMS & PRINT = blank,print preview is coming fine for all PO except
    ZPF5 Is not affecting in print preview,but in PO affecting.
    Any help from MM side?
    Thanks
    Gourav.

    Dear all,
    Issue resolved.
    I have changed my select query & remove old condition from that,now I am using only ZPF5.
    Like :
    SELECT SINGLE KBETR KWERT KRECH FROM KONV INTO (V1_KBE,V_PF,V_KREC)
             WHERE KNUMV EQ V_KNUM AND
                   KPOSN EQ WA_MAT-EBELP AND
                   KSCHL EQ 'ZPF5'. " not zpf2
    Thanks all for your time.
    Thanks
    Kumar Gourav.

Maybe you are looking for