New configuration behaviour

Hi,
Would like to know if the following behaviour is normal with a new setup on an ASA having security+ installed; (or after a reset to factory defaults);
is it normal that we can't access the server on the dmz (remote desktop for example) from the inside(lan) without any access lists or nat rules defined? I thought this was out of the box behaviour.. I am using version 8.4 of the firmware.
thanks.

Guess what, the router for some reason fell back to version 8.2 of the ASA firmware when I reset it to factory defaults. I really don't understand why it fell back to that version again.
So after upgrading again to 8.4 it now allows me to get to the DMZ as you specified.
Any way to have 8.4 the new permanent firmware that will survive a factory defaults command?

Similar Messages

Real time Procedure for new configuration

In real time what is the procedure for new configuration like new payment term. I want procedure in real time
. thanks , Sravas ...

Hello,
As long as your S2000 has an USB ADD, you will be able to use it with OmniDriver-SPAM. The HR2000 will work fine.
Here are two good videotutorials that will show you how to use OmniDriver-SPAM with its LabView dll to acquire spectra:
http://spectroscopytv.com/2009/02/02/omnidriver-labview-part-1/
http://spectroscopytv.com/2009/02/02/omnidriver-labview-part-2/
Hope this helps,
R

New Configuration Editor

Hi,
Just wanted to know is the new configuration editor is available in Netweaver 7.0. We are currently on basis SP 16.
For SAP delivered demo configurations we can see the data just like the configuration editor as explained in Mentor hands on session excercises. For new configuration of custom development we still get the old editor.
Is this a bug or new editor is not supported in 7.0
Regards
Rohit Chowdhary

Hi,
the new config editor (for component configuration) was introduced with 7.0 SP14.
You could check the parameters of CONFIGURE_COMPONENT_OLD, if there's the parameter for the old configurator on X, then the old editor is shown.
Regards, Heidi

Getting Java error While click on Test model for New configuration.

From ” Configurator Administrator responsibility” we use the below link and getting Java Error:
Log in -> Configurator Administrator responsibility -> Configurator Developer -> Simple Search -> Item Name: r100s -> Click Edit -> Click Test Model -> select Start New Configuration -> Click Next -> select Model UI -> Click Finish -> get java.lang.NullPointerException.
If any body have encountered the same error , Please let me know the solution.
Regards,

Below is the Error:
[Dec 1, 2009 9:48:51 AM GMT+00:00]:1259660931381:Thread[Thread-127,10,main]:1467:85913090:essapdu31z1.emrsn.com:10.236.93.46:27619:27620:EXCEPTION:[cz.servic
e.ConfiguratorServiceLocal.From processMessage()]:[null_3a1685d_2 # 31] null
java.lang.NullPointerException
at oracle.apps.cz.service.ConfiguratorService.fetchModeldata(ConfiguratorService.java:1708)
at oracle.apps.cz.service.ConfiguratorService.processMessage(ConfiguratorService.java:447)
at oracle.apps.cz.service.ConfiguratorServiceLocal.onMessage(ConfiguratorServiceLocal.java:18)
at oracle.apps.cz.runtime.PageController.postServiceMessage(PageController.java:535)
at oracle.apps.cz.runtime.PageController.fetchModelData(PageController.java:707)
at oracle.apps.cz.runtime.oa.server.CZApplicationModuleImpl.submitDataRequest(CZApplicationModuleImpl.java:954)
at oracle.apps.cz.runtime.oa.webui.AbstractMainPageController.getModelData(AbstractMainPageController.java:547)
at oracle.apps.cz.runtime.oa.webui.AbstractMainPageController.loadPageStructure(AbstractMainPageController.java:2313)
at oracle.apps.cz.runtime.oa.webui.MainPageController.processRequest(MainPageController.java:65)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
Regards

VC : Update Equipment with new configuration number

Hi,
I am trying to update an existing equipment with a new configuration number (cuobj).
I used try to use 'BAPI_EQUI_CHANGE' to achieve this but apparently they didn't work even though i've received no exceptions. (no luck either with EQUIPMENT_MODIFY)
For 'BAPI_EQUI_CHANGE' i used following code :
data : v_equipment like BAPI_ITOB_PARMS-EQUIPMENT,
          v_datageneral like BAPI_ITOB,
          v_datageneralx like BAPI_ITOBX,
          v_dataspec like BAPI_ITOB_EQ_ONLY,
          v_dataspecx type BAPI_ITOB_EQ_ONLYX,
          return type BAPIRET2.
CALL FUNCTION 'BAPI_EQUI_GETDETAIL'
EXPORTING
EQUIPMENT = v_equipment
IMPORTING
DATA_GENERAL_EXP = v_datageneral
   DATA_SPECIFIC_EXP = v_dataspec
return = return.
IF return is initial.
v_dataspec-READ_CUOBJ = newcuobj.
v_dataspecx-READ_CUOBJ = 'X'.
CALL FUNCTION 'BAPI_EQUI_CHANGE'
EXPORTING
    EQUIPMENT = v_equipment
    DATA_GENERAL = v_datageneral
    DATA_GENERALX = v_datageneralx
    DATA_SPECIFIC = v_dataspec
    DATA_SPECIFICX = v_dataspecx
IMPORTING
    RETURN = return.
IF return is initial.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDIF.
thanks for your help.

Hi,
Please try this FM EQUIPMENT_UPDATE.
Check program RISTEQ01 for sample code on how to use above FM.
Regards,
Ferry Lianto

"Access denied. Login again" when creating New Configuration in Object Edit

Hi all,
I am trying to complete ]<a href="http://help.sap.com/saphelp_nw70/helpdata/en/43/8d77556536267fe10000000a1553f7/content.htm">My First Composite Application</a> but got stuck at the step <a href="http://help.sap.com/saphelp_nw70/helpdata/en/43/95c95b9fc32293e10000000a1553f6/content.htm">Configuring the Object Editor User Interface</a>. When I try to create a new configuration, I get the error message "Access denied. Login again", but I have no idea where to change to overcome this.
Please advise me, if you have any idea.
Thanks,
Masa

It was due to missing user role.

[svn:bz-trunk] 9522: Add new configuration options to cluster defined in qa-regress.

Revision: 9522
Author:   [email protected]
Date:     2009-08-24 10:37:30 -0700 (Mon, 24 Aug 2009)
Log Message:
Add new configuration options to cluster defined in qa-regress. These options were added in checkin 9201 and expose JGroups channel configuration settings that weren't configurable previously.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Problem to compile new configuration with imsimta

After I patched 116568-53, iit was impossible to compile new configuration with "imsimta chbuild". The response is:
13:57:09.20: Internal error in cl_init -- cannot open command definition file IMTA_BIN:pmdf.cld
Any one know how to solve this problem?
Thanks in advance.

I checked the file as you suggested and i didn't find any tcp_lmtpss-daemon channel so i inserted the following lines:
[CHANNEL=tcp_lmtpss*]
master_command=IMTA_BIN:tcp_lmtp_server
[CHANNEL=tcp_lmtpsn*]
master_command=IMTA_BIN:tcp_lmtpn_server
but i obtained the same errors.
what's wrong? (i am new to sun one messaging server)
thanks

Add new configuration item in the List Settings

All,
I would like to add a new item "configuration" in the list settings. For example, the list settings already have following items
List name, description and navigation
Versioning settings
Advanced settings
Validation settings
Audience targeting settings
Rating settings
I would like to add a new one and do coding on it
Thanks ^_^

Hi Andy,
Thanks for posting your query, Kindly browse the below mentioned URLs to add custom properties in List/library settings step by step
http://sp2013.blogspot.in/2013/01/sharepoint-2013-list-custom-form.html
http://www.enjoysharepoint.com/Articles/Details/create-custom-list-property-in-sharepoint-list-settings-10536.aspx
http://www.c-sharpcorner.com/UploadFile/sagarp/create-custom-list-property-in-sharepoint-list-setting/
http://johanolivier.blogspot.in/2010/07/custom-settings-for-sharepoint-list-or.html
http://www.dotnetspark.com/kb/5657-create-custom-list-property-sharepoint-list.aspx
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

New configurable position in sales order

My greetings!!!!))))
This is a question, how can I create a new additional position in sales order by copying already existent configurable position with inheriting all characteristics values, source document number and e.t.c.?

hai justin,
check the variant condition type VA00, in your pricing procedure.
if you maintained VA00 condition type in in pricing procedure, it will pick the particular configurable material price, according to the charectrestics You maintained.
In Transaction code: v/06, you can see all the condition types. If you are not finding conditon types when you are creating sales order, those condition types are not maintained in your pricing procedure.
hope this will help you
srinivas

New UI behaviour in Windows 8, can it be changed?

Hello,
We are trialing Windows 8.1 in our work environment and of course my PC was the first one to get upgraded. =) I am having some... "discomfort" using Windows 8.1 and I wanted to see if any of the things I am having trouble with are settings or if
I am just stuck with it.
#1 WindowsKey + typing a command = 'search the internet for the command'
In Windows 7, if you hit the windows key and type telnet <ip address> and press enter a telnet box would appear immediately. In Windows 8.1 a search box pops up and asks you if you want to run the command telnet <ip address> or look at a bunch
of wacky articles about telnet on the internet.
#2 if you have an application open already and you try to launch a new instance of the same application from the 'Start' screen all that happens is the focus changes to the currently running application. For example, hit windowskey and type cmd and press
enter, a command prompt box appears. Do the same exact thing again and all it does is refocus on the existing command prompt. The same is true of remote desktop connections and I assume every other application.
Does anyone know if these behaviours can be changed? They are fairly inefficient productivity killers for people who do a lot of multi-instance stuff.

Hi!
To your first "problem", there is no solution that I know of, I haven't actually thought about it myself until you mentioned it now.
But the second one can easily be solved. This was one of the first things I changed on my computers.
Open up regedit and go to HKCU\Software\Microsoft\Windows\CurrentVersion\ImmersiveShell\Launcher
Then create a new DWORD called DesktopAppsAllwaysLaunchNewInstance and give it a vaue of
1
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin
Hi,
There does not appear to be a 'launcher' folder under 'ImmersiveShell'
I'm glad I am not the only one who found these changes terribly offputting.

Why Solaris 10 could not remember my new configured IP?

Hello, All,
My problem/question is that:
Solaris 10 on T2000 server seems not remembering IP configuration,
I searched the past posts, there are some topics related, but after all that
suggestions/solutions I've tried, it still doesn't work.
What I wanted to do:
1. Add a logic IP address on ipge0,
e.x.
ifconfig ipge0:1 plumb 10.1.200.69 netmask 255.255.0.0 up
check with ifconfig -a
it is up running
2. Add a new NIC,
e.x.
ifconfig ipge3 plumb 192.168.1.11 netmask 255.255.255.0 up
After reboot, it is back to all the original configuration which ipge0 only has original address,
and No ipge3 configuration AT ALL!
BTW. I have configured /etc/inet/ipnodes files
/etc/inet/hosts
/etc/nsswitch.conf
/etc/netmasks
/etc/resolv.conf
Please suggest what i missed here?
Thanks
---wangk

Hi, Paul,
Thanks for the reply, yes, I did create those files, and you are right, I missed "hostname.ipge3" file
hostname.ipge0:1
hostname.ipge3
defaultrouter
Now, some how, the virtual NIC ipge0:1 always gets the wrong Netmask, and BOTH ipge0:1 and ipge3 have to be manually brought up after reboot, here is a copy/paste after system reboot, you can see a different Netmask and "No up" status, please ANY Idea?
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ipge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.1.200.68 netmask ffff0000 broadcast 10.1.255.255
ether 0:14:4f:7e:4e:d0
ipge0:1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.1.200.69 netmask ff000000 broadcast 10.255.255.255
ipge3: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.1.11 netmask ffffff00 broadcast 192.168.1.255
ether 0:14:4f:7e:4e:d3
Thanks alot
----wangk

Google News Configuration

Hi,
On HOME work center, we have dashboard for latest news which provide the top stories from google news.
I need to know, how we can control the news like category, source, display, etc.
Kindly let me know if there any configuration available to personalize it.
Thanks in advance
Govind Sharma

Hi Govind,
if you are using HTML client then this link will be helpful http://www.youtube.com/watch?v=JFj4aUkWAtI
In Silverlight client you can personalise the screen, you can add other RSS feed from different sources.
give a try and let me know if it helps.
Regard
Sunil

LR3: New filter behaviour conflicts with quick collection

Going to the Quick collection (Ctrl +B) resets the filters, so when returning back to where I was before (Ctrl + B again), I don't see the same view.
This cannot be avoided with locking the filters -> then the filters are used for the Quick colelction and often I see nothing in there or only some of the photos. So, could the Quick collection be an exception to the new filter resetting behaviour? (i.e. separate filters for QC? Or no filters for QC?)
Thanks,
Vit

Hi,
The LR Print Module is working as it was designed to work - the Custom Package option will allow you to perform the actions that you require, but not automatically.
Why not place your request for added funtionality (i.e. add an option to allow automatic population of the Custom Print Package layout) on the Feature Request forum below;
http://forums.adobe.com/community/lightroom/lightroom_feature_requests?view=discussions

New Configurations on MBP C2D!!!! (ironic)

MBP 15" somtimes at 2,33ghz
MBP 15" sometimes at 2,16ghz
MBP 17" Sometmes at 2,33ghz
YES!, this are the new pro laptops configurations
We know all the problems MBP CD had, we thought it will be fixed in C2D after using people as laboratory rats in first generation. Well, C2D is here, and problems too, all computer trademarks have problems, but apple is always telling us they are the best, but now, they have same configuration of normal pc´s and less Please, all users of MBP, C2D and CD, plug your computer, install coreduotemp, quit the battery, look the processor speed, you will see it at 1ghz. And with battery, notice the continously speed variation, normal in some energy configurations and in some temperatures, but not always.
Of course, we continue with noise problems and eEtcetera

That behavior is normal. Intel's chips use a technology called (I believe) "SpeedStep", which dynamically adjusts the processor speed as is needed. This improves battery life and has no impact on performance.
With respect to quitting the battery, I assume you mean to remove it... This will, in fact, freeze the processors at a max of 1GHz, which is a safety feature.
A quick review of these forums would have revealed that, btw.
Thanks for trolling, though!

New configuration behaviour

Similar Messages

Maybe you are looking for