New contacts not appearing in contact list after ios upgrade

I recently updated my iphone to the latest ios, since then when I have saved a new contact to my phone, even though it appears with the new contact, say in recents, it does not appear in my contacts list?

I added the contact from the "Recents" tab. It now shows in "recents" as that persons name - rather than just the phone number, but doesn't appear in my contact list. Same thing happened when I saved a new contact from a message I received & also when I saved from a contact that had been SMS'd to me.

Similar Messages

Lync Contacts not appearing in Lync 2010 after user is moved to Lync 2013

Good Morning,
Our company recently migrated all of our users to Lync 2013 from Lync 2010. Most of our clients are still running the Lync 2010 client on their workstations. There is an ongoing project where we are upgrading to Office 2013 as well.
When a user signs into Lync, clicks on their contacts, the list is blank. They see their frequent contacts and are able to search for people. Some people are able to manage their contacts through OWA 2013 since we have the integration in
place. If they try to add contacts in Lync, they receive the message:
Cannot Add, Remove or move contacts or groups at this time. Please try again later.
I have tried going into the %appdata%\Microsoft\communicator directory and deleting the .cache and .idx and opening Lync again and still they do not appear.
Found this article: https://support.microsoft.com/kb/2757458?wa=wsignin1.0, but we cannot role people back to Lync 2010. So they will just have to live with it until they receive Lync 2013 and use OWA 2013 to manage them until their office
client is upgraded.

Hi BrianDougherty,
I’m not sure whether this is caused by UCS, but you can test it by disabling UCS for a test user.
Run the following command and then check the result.
New-CsUserServicesPolicy -Identity NoUCS -UcsAllowed $False
Grant-CsUserServicesPolicy –Identity “test user” –PolicyName NoUCS
Invoke-CsUcsRollback –Identity “test user”
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Videos does not appear in the list after syncing

I have synced my 10 minutes music video to my 3gs and the syncing already completed without any error.
but then i could not find my video in my 3gs. i already checked the include music videos in music sync. i'm sure the video is in mp4 format.
before this, it shows no videos, you can download videos from itunes, but after i sync this video, it turn out there's like a list of videos but it does not appear. only an empty list without nothing to select on.
i even try to find the video using spotlight search and it resulted none in my phone but in itunes it shows the video is in there. i wonder where the video goes.. = ="

I think my question wasn't clear. I know how to display the attachment header (I use classic layout) but the problem is that the paperclip icon does not appear against the messages that contain attachments. See screenshot below. The attachment column is displayed but is blank. These are my sent items and I know for a fact that most of them have attachments. Can you help?

Time Capsule does not appear in AirPort Utility after Yosemite upgrade

Just upgraded to Yosemite and the Time Capsule appears as a shared device in Finder, but does not appear in AirPort Utility. Any solution to this so I can manage my Time Capsule again?

I'm having the same problem. Did you reset your Time Capsule to factory settings or simply restart it?

IPad 2 Does not retain names and passwords after iOS-upgrade to 8.0.2

After the last series of iOS upgrades (device current status is 8.0.2 , latest available) the iPad2-16G WIFI version, does not retain any names and passwords anymore. Function (Safari) is enabled.
Re-booting, clearing memory etc did not solve anything).
Is this a known version 8.0 bug or .......?

Make sure "Private Browsing" is disabled.

New Users Not Appearing On Login List - Help!

Hello Mac geniuses,
I run a 10.3.9 network in an elementary school, and I since returning from summer vacation I have had problems with many of my client eMacs not displaying the names of users I have added in WGM. These eMacs are also still displaying the names of accounts I have deleted.
If anyone is kind enough to help a stranger, I have copied below the transcripts of my email exchanges with an Apple tech, in my struggle to get my school functioning again. (I have placed them in the correct order so the 1st email is on top and the last on bottom. The tech's name is John and I am using "Jon" to make it slightly less confusing!).
My very grateful thanks in advance to anyone who can help me.
Jon
On Sep 5, 2006, at 3:28 PM, Jon T wrote:
Hi John,
After deleting and adding users in WGM, some login screens still show deleted users and do not display the new users.
I tried deleting the MCX cache via NetInfoManager on the clients, and even restarted the server, but it has not affected several machines.
Any advice?
Server: Dual 1Ghz G4 (Mirror Door) running Panther Server 10.3.9
Clients: eMacs running 10.3.9
Thanks in advance.
On Sep 5, 2006, at 3:47 PM, John G wrote:
Jon,
Go into the client as the admin account.
Delete /Library/Preferences/Directory Service
Restart and setup Directory Access in Utilities
Let me know if that works.
John
On Sep 6, 2006, at 9:08 AM, Jon T wrote:
Hi John,
Thanks for replying. unfortunately, that didn't work either . . .
Jon
On Sep 6, 2006, at 2:03 PM, John G wrote:
Jon,
Are you sure the machine is on the network and talking to your
server?
Go into Dir Access and uncheck LDAP and readd the server.
On Sep 6, 2006, at 4:07 PM, Jon T wrote:
Hi John,
Yeah, they're on the network, students can log in using the "Other" option, I can connect to the server and mount shared folders, etc.
I did as you said, rebooted, still no updated list.
Jon
On Sep 6, 2006, at 8:57 PM, John G wrote:
Jon,
Netinfo is probably corrupt.
Follow these directions to blow out Netinfo to create a new one.
Bind back to server.
<OS X frozen while booting.pdf>:
AFP548.com: Articles: NetInfo Recovery Techniques
NetInfo Recovery Techniques
Joel Rennich, [email protected]
4 June 2002
When working with NetInfo, which we are and hope to have some more articles on in the near future, it is important to know
how to back up to a previous version of your database.
1. First, the most brutal way of recovering from a nonfunctional database.
Boot into single user mode by holding down the "s" key while starting up. Follow the handy instructions Apple gives you at the end of the startup sequence and run fsck. Then mount the system root disk as read/write with:
mount -uw /
Now you can get on with recreating your database in a very brutal way. Remove your current database with:
rm -rf /var/db/netinfo/local.nidb
Now remove the file that prevents the Setup Assistant from running:
m /var/db/.AppleSetupDone
And now reboot to get things rolling.
reboot
This will cause the Setup Assistant to launch, complete with music and bouncing blue blobs. If you remember which account you set up first when you last saw this screen, set up that account now. Otherwise, go with whatever you want for your first
Administrator account. If you match it up with the original Administrator account, all of your permissions should be groovy.
Otherwise, get familiar with chown and chmod and you will be able to set things right.
The above method is rather draconian and isn't for times when you need to replace a complicated NetInfo setup, but should work perfectly well for an essentially single user machine. However that probably rules out most Servers.
On Sep 7, 2006, at 8:15 AM, Jon T wrote:
Hi John,
I performed that protocol, but even that didn't fix the problem!
I know I've heard someone once suggest (in a moment of resignation) that I just use the blank name and password fields at login, but this is not really an option in elementary school. I only have 478 users in WGM, so I can't believe that would be too taxing for OS X Server!
Thanks again for your thoughts on this.
Regards,
Jon
On Sep 7, 2006, at 9:53 PM, John G wrote:
Jon,
The last resort is to reimage.
Are you managing computers by Guest computers or
computer groups?
John, we're talking about 23 computers here - re-imaging is not an option for me alone unless I have some technical assistance (I don't know how to 'ghost' images across a network).
I was managing the users by Groups though I did have a list of the computers called "lab computers". I just noticed that when I try accessing the Computers tab in WGM (whether on my teacher's station or on the server itself) I get the same error message:
Got Unexpected Errror
Error of type -14136 on line 432 of
ComputerListPluginView.mm
Please advise!
Thank you again,
Jon

The list of users is a plist file and should be at at /Library/Preferences/com.apple.loginwindow.plist on the clients. See this thread for more information:
http://discussions.apple.com/thread.jspa?messageID=2368769&#2368769
If you've got a good plist from a client that sees the right users, you should be able to copy it over. If not, try backing up the file from one client and then deleting it and restarting.

I added 3 contacts and saved on my iphone 5, but do not appear on my list of contacts. the names appear when they text or call me. I have to go search for their messages when i need to call them

i added 3 contacts and saved on my iphone 5, but do not appear on my list of contacts. the names appear when they text or call me. I have to go search for their messages when i need to call them?

Try to restore your iphone via iTunes or update to ios6.1.2.
If itunes gives an error with restoring (DFU/Recovery or just normal)
try this:
open your computer and search on windows; C://windows/system32/drivers/etc/hosts
open up the hosts file in note pad you will see IP adresses and more add another line and put in this:
#74.208.10.249 gs.apple.com
this is a by-pass to the cydia/saurik restore server, it has nothing to do with jailbreaking over voiding apple's warranty
let me know if succeeded!

Iphone contacts "not available" to car phonebook after messing around with Outlook.pst file names and backups. Iphone4 connects to car though and other phones connect properly.

iphone contacts "not available" to car phonebook after messing around with Outlook.pst files, names and backups, on my ms XP 2003 laptop. I substituted a much smaller new Personal Folder -Contacts File, with a smaller list of phone numbers (4 only as a test) which successfully synced to the iPhone 4. The iPhone connects to the Skoda Octavia HandsFreeSystem OK (Bluetooth works fine), but now iPhone wont load the new Contacts as it did originally. However a family Nokia (never messed with) can connect properly. So must be the iPhone or more likely an Outlook.pst \ Contacts problem. Ideas?

After fiddling a little more, the following fixed my corrupted outlook.pst file:
1) I made a backup
2) In outlook under file, I exported the calendar to excel
3) In outlook under file, I imported the calendar back to outlook
And voila, it worked.

HT6154 Automatically call is going to someperson in the contact list after latest upgrade in iphone 5s

Hi All,
Automatically call is going to someperson in the contact list after latest upgrade in iphone 5s
Thanks and Regards,
Raghul

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Created new data source, does not appear in the list

Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
thanks
Srinivas

Hi
I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
- If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
- It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
- Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
thanks
Srinivas

Why do my contacts not appear in FaceTime

Why do my contacts not appear in FaceTime

Try turning off facetime in Settings > Facetime.
Reboot the device.
Turn On Facetime Again.
(You might be charged by your cellular carrier again.)
Check whether you get the contacts.
If not open any contact from the contact Application which according to you is a Facetime User and check whether you find Facetime option in that Contact.
Reply Further.

New Downloaded/Installed Cannon PPD Print Driver does not appear in driver list

I have downloaded and installed every new driver, 5 times, including he PPD driver for the Canon imagerunner 5570 printer, however when I add the printer the PPD driver does not appear in the list of drivers. the printer is on a wireless network and I was able to print before updating. I had not set up Time Machine until today so I can't go back, or can I. I am a new Mac owner so please be gentle.
Thanks

The PPD installer will copy files to HD > Library > Printers > PPDs > Contents > Resources > en.lproj and the file names will be "cnxxxx.pdd". Can you first check that you have all the files installed.
If you do have the files then you can add the printer using IP > LPD for the protocol. Note that the iR5570 does not support Bonjour so it won't appear in the Default view of Add Printer as Zlig suggested. You then enter the IP address of the iR5570, leave the queue name blank, change the name to something meaningful and then search for the ir5570 in the Print Using menu.
If there are no Canon iR models listed in the Printer List (typing iR in the Search field will determine this) then you should try resetting the printing system as follows.
1. Open System Preferences > Print & Fax
2. Move the mouse over the Printers list.
3. Hold down the Control key and then click the mouse
4. Click on the 'Reset printing system' pop-up
5. Close Print & Fax and restart your Mac
This will remove all the printer queues from Print & Fax but will not remove the printer drivers installed on the Mac. So you can try adding your print queue to the iR5570 again using the process above.

Treatment of exchange rate difference- company code not appear in the list

Dear guru,
I am configuring the treatment of exchange rate difference (SPRO> MM> LIV > Incoming invoice> configure how exchange rate differences are treated). However,the company codes that needed to be configured are not appear in the list. Please note that in the config screen, dont have the option of "New entry", we only set base on the list of existing company codes.
Also, please be noted that we configured accounts for KDM, PRD in OBYC already
Appreciate your respond.
Thanks and best regards,
Hong

Hi,
Check in table "T169P" & "T169V", whether your Co. code exists or not? If not then maintain following config settings.
SPRO > Materials Management > Logistics Invoice Verification > Incoming Invoice
> Maintain Default Values for Tax Codes (After maintaining this entry by "New Entries", it will start appearing for following options)
> Configure How Exchange Rate Differences Are Treated
> Configure How Unplanned Delivery Costs Are Posted
> Edit PO Supplement Text in Invoice Verification
> Set Check for Duplicate Invoices

I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

Hi,
I forgot my security questions and I don't have a rescue email setup.
I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
How can I reset the security questions.
thank you

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

App asks to have location services turned on but App does not appear in location list.

I start the EZ Word Cheats and it starts with the menu open. I click on Quick Import and a blue box appears with the message to turn on Location services in settings. I start the settings app, click Privacy, click Location Services, but EZ Word Cheats does not appear in the list of Apps that can have Location Services turn on. Shutting the iPad off or resetting it does not help.

I reset location services in Setting>General>Reset>Reset Location & Privacy and that fixed the problem. I need not need to restore from new. When I ran EZ Word Cheats after the resetting location services and then clicked on the Quick import under the menu, a message came up asking access to Photos instead of location services. This is the correct behavior since the program does need access to my photos but does not need Location services.

New contacts not appearing in contact list after ios upgrade

Similar Messages

Maybe you are looking for