New Cost center Time-interval getting deleted automatically in Asset master

Hi Friends,
While changing the cost center in the asset master data with a new time interval, the check-box 'Deletable' gets automatically ticked and the new interval gets deleted and the new cost center is updated in the old time interval. The check-box is greyed out and cannot be edited.
The right-most check-box in the 'More Intervals' button in the second tab of the asset master is the 'Deletable' check-box (Field Name: RA02S-XDEL).
Please help me to make the check-box editable or help me to remove the default tick in the check-box.
Regards,
Shilpi

Hi Murlidhar,
Thanks a lot for the response.
If the check-box gets deselected when we press the 'Save' button, still the new interval is getting automatically deleted.
Earlier this was not happening, the new and the old interval was getting displayed separately. There are instances in the system, where both old and new interval is displayed.
Of late, we notice that the new interval is getting deleted as soon as we save it.
Please help to retain both the intervals.
Regards,
Shilpi

Similar Messages

To find out recently new cost center

Hi all,
I have a problem that I had updated one request new data(it's like 200904 transaction data) to cube,
while the inexistent cost center in master data is added(0Costcenter).
    The problem arise,how could i find out which new cost center is added to 0costcenter,because I
need to listed those new cost center to user.
    Thanks.

in the maintain master data screen for cost center give all the attributes a restriction to initial value.
once you get cost centers search with them in the infocube and take out final list from there.
or you write a abap report to check cost centers which have all fields initial and get it in a file.
data: itab type standard table of /Bi0/pcostcenter with header line,
        itab2 type standard table of /Bi0/pcostcenter with header line
select * from /Bi0/pcostcenter
into table itab
where objvers = 'A'.
loop at itab.
if itab-BUS_AREA is initial.
if itab-0COMP_CODE is initial.
.... keep checking for all the attributes.
     .... if all atributes are initial
      append itab to itab2
endif.
endif.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = <give file name here>
write_field_separator = space
TABLES
data_tab = iout
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
you will get all cost centers which doesn't has any attribute

New Cost Center trigger

I need sample code to implement a trigger so that when a new cost center (dept) value to the accounting flexfield is added, then it fires off and creates the corresponding row in the fnd_shorthand_flex_aliases table
Does any one know how to create it?
Thanks,
Chiru

Hi All,
I create a trigger to insert data into the fnd_shorthand_flex_aliases table, if a new flex_value is created in the fnd_flex_values and fnd_flex_values_tl.
However, I am getting the error:
ORA-04091: table fnd_flex_values is mutating, trigger/function may not see it.
More than likely it is due to the fact that I am trying to query the table fnd_flex_values to insert into the fnd_shorthand_flex_aliases table, while inserting into it at the same time.
Does any one know how to get around this?
Thanks,
Chiru

Sms getting deleted automatically in 5220

Hello
I have been using nokia 5220 for the past 4 years and did not have any problem. couple of days back it got switched off due to low battery and later i switched on after charging to my surprise only 236 sms were there in inbox out off 800. Now also only 236 sms are there and if I get any new messages old messages get deleted automatically. kindly help me in resolving this issue
Thanks

Hi, I have a similar problem with my Nokia 113. When the device has been shut down, all the text messages in the inbox are automatically deleted. Very strange. Resetting date and time doesn't work, neither does resetting it to default settings...
Any other ideas or solutions please?

I would like to insert new cost center for the existing layout in BCS

Hi,
I would like to add cost center to existing layout.
Currently we are loading data into BCS using flat file .
In BCS we have current layout existed with below format.
Header
Controlling area
Fiscal year
Posting period
Data Rows
Company
Item
Profit Center
Functional area
Trading partner
Period Value LC
Period Value GC
Even we are getting flat file from R/3 as above format.
Now our Business required cost center in BCS as their requirment and need to be bring from R/3 to BCS.
In R/3 our ABAP people are working to bring the cost center from R/3 and made a flat file for us.
In BCS we need to load the file which has new cost center,which was comming as per the new requirment.
Please advise me how to add cost center in Data Rows of BCS.So that it can accomidate new cost center which is comming from R/3.
Please some advise me on this and answer would be appreated.

Prasad,
I knew how to add char to cube in BW.But i am not sure about BCS .
- What's the difference in assigning the infoobject (CostCenter) to the infocube, doesn't matter if it's the basic (ordinary) or the BCS totals cube?
I will follow as you said.
- Taking the BW310 or SEM240 is very useful.
Once it is done then what are the next steps need to do it.
- What's done? What's the question?
I am assigning points to you
- I do not need the points assigned for nobody knows what. Feel free to unassign them.

New Cost Center

Dear All,
Scenario :
New cost center or new location or new office has built by organization , how to handle this scenario without interference with existing database entries ?
Is the following option is correct ?
To create new database and punching entries in that database for new location or new branch.

Hi
Thats purely ur managment policy and decisson based.
See as u said by defining numbering series, Diff G/L acc, Cost Centre,whse we can achive simply, finally management will get consoldiated P&L as well Profit Centre wise also for all Profit centre wise...
If they want to maintain different DB then that also ok, finally there is no option for consildaation the P&L,TB without Some addons....so this factor u have to look when u r going for different DB for same Business process.
Some Companies will have lot of constraints like this branch sales details, customers and their details should not be shown to other branches but to achive this in default B1 it is tough to achive...so u have to think in multiple angle which is best.
Cheers
Giri

Lync account getting deleted automatically

Lync account of a particular user is getting deleted automatically every friday. Verified that no automated scripts are running in that time in any of the servers. Logs in AD says the msrtc attributes are stripped by a front end server. Anyone has
any idea whether there would be any maintenance activity in lync which will automatically delete a users lync account? Please help.

Is this happened with different user every time or same user?
Is this user delete from DC or Lync only?
Verify that user isn't lock or disabled. Also verify from Lync cals.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In atte

My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH.

How to configure new cost center..

HI
my problem is untill now i used old cost center, to day onwards i want use new cost center... how to modify in my cost element in cost center.
i want to modify my old cost center and put new cost center.
Thank you.
Ashok kumar

hi Anil,
Check your settings in the Transaction code OKB9. In this transaction, default cost centers are maintained for each Company Code and Cost element.
Else you have defined default cost centers in your Cost Element. In such Case, use t-code KA02 and change the cost Center
If you satisfied with the reply then plese assign points.
Regards
Mahendra

Regarding new cost center

HI
my problem is untill now i used old cost center, to day onwards i want use new cost center... how to modify in my cost element in cost center.
i want to modify my old cost center and put new cost center.
Thank you.
Ashok kumar

hi Anil,
Check your settings in the Transaction code OKB9. In this transaction, default cost centers are maintained for each Company Code and Cost element.
Else you have defined default cost centers in your Cost Element. In such Case, use t-code KA02 and change the cost Center
If you satisfied with the reply then plese assign points.
Regards
Mahendra

Messages and images getting deleted automatically ...

I have got Nokia C6-00 in March , However after some day I started facing issues. Images in Photos and Messages are getting deleted automatically ..
Could you please suggest how to resolve this issue?
FYI, I have latest OS on the phone.
Regards,
Shaan

I think there are many equally likely explanations:
(1) The system is running normally, its just the application allows large backlogs to accumulate before it processes messages (eg, there are large bursts of messages).
(2) The application simply isn't processing messages as fast as they are produced.
(3) The application is somehow failing to delete messages. Perhaps there's a durable subscription on a topic that isn't being serviced, or perhaps the MDB is throwing exception or calling rollback.
(4) Some other type of data is accumulating in the store. For example, diagnostics subsystem logging may have been enabled.
I recommend examining your statistics to see if you can pin down which destination and/or subscription is accumulating messages (if any -- its possible some other subsystem is accumulating data -- such as the diagnostics subsystem has been known to to this).
Here are some pointers to the JMS console screens:
Environment -> Servers -> [wl server] -> Monitoring (top tab) -> JMS (bottom tab), optionally click on values to drill down for more detail.
Services -> Messaging -> JMS Servers -> [JMS Server] -> Monitoring -> Destinations/Transactions/Session Pools/Connection Pools
Services -> Messaging -> JMS Modules -> [module name] -> [destination name]
Tom

How to add new cost center to cycle segments

Hello SAP Gurus,,
How to add new cost center to cycle segments?
needed badly and ASAP

Hi
Go to KSu2 and give the cycle name ad select the segment that you need to add cost center.
If you are deal with cost cneter groups add new cost center to your cost center group KSH2.
Kesh

How to use new cost center field, new profit center field, new account field?

As I create a new change request of adding new GL account, or that of new cost center, or that of new profit center, I normally enter the new GL code GL01, or new cost center CC01 or profit center code PC01 in "General Data" section on the change requst screen, these codes (GL01, CC01, PC01) are landed in ECC upon data replication.
I do see there is another field called "New Account" of GL change request, or "New Cost Center" of CC change request, or "New Profit Center" of PC change requst all of which is under "Administrative Data" section. I have never used it. but I was wondering what the purpose it will serve and how should I use them.
Please advise,
Thanks,
LUO.

Hi Kiran,
Thanks for the info. I don't quite understand though. could you tell me more about the usage of each? Why it is used when GL or CC or PC is blocked? Would the new cost center code entered replace old cost center master record?
Thanks,
LUO

Emails get deleted automatically after 2 weeks

My emails are getting deleted automatically after 2 weeks. I have important emails that I cannot retrieve. I changed setting to never delete but it keeps deleting. Also I called about the issue and It was never fixed. I cannot be loosing emails. Especially that this is an email address that everyone knows for me.

Do you have the account enabled on more than one device or computer? If so, the retention settings on that other device will override the settings in Comcast preferences.

E 72 Call logs getting deleted automatically

Hi,
I am using e72 since 1 month. My phone call logs gets deleted automatically as the day starts. I have set the call log duration to 30 days. My phone software version is 031.023 date31/03/2010. Please provide the solution

I'm in a huge problem... My E72 is set to log 30 days but it only logs 1000 entries which is not enough for me so my oldest entries get deleted after approximately 22-23 days...
Can anyone from Nokia confirm this? Is S60v3 log limited to 1000 entries? It happened before and it happens also with the newest 051.xxx firmware.
How to resolve this? Cut back on phone usage?!

New Cost center Time-interval getting deleted automatically in Asset master

Similar Messages

Maybe you are looking for