New created values are not displaying after upload

Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AM

Hi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards

Similar Messages

Service order values posted to WBS, values are not displaying in CJii3

Hi,
We have posted thevalues from service order to wbs.
values are not displaying in cji3.
Regards,

Hi,
If the data has been successfully loaded into BPC, then it should be visible in BPC report.
You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
Hope this helps.

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

Thanls Ernie. I found the solution. My problem was previous to 10.10.3. It looks like the installation of final cut and uninstallation of fcp delte a plugins that was needed for Aperture. I recover from time machine my plugins in Library/frameworks/plugin.manager.framework and now Aperture works ! Ouf....

Mails are not displayed after migration to new iMac

Hello!
Today I migrated the contents of my old office iMac (G4, MacOS 10.4.11) to my new one (new 20'', MacOS 10.5) via FireWire.
Unfortunately my mails are not displayed on my new Mac:
I can see all my mailboxes on the left side, but the window, that should show the mails themselves is empty. I already took a look into the /library/mail folder and all my mails seem to be there.
They are just not displayed.
I use mail on that Mac with only one POP account.
What could cause this behaviour?
Thank you very much in advance!
Thomas

I figured out niw, how to solve the problem:
After the migration go to the Userdirectory-> Library -> Mail and delete the files:
MessageRules.plist
MessageRules.plist.backup
MessageSorting.plist
MessageSorting.plist.backup
Then Mail works properly.
(The only thing ist, that all filer rules are gone.)

Oracle Table Values are not displayed when tried to display with Essbase

Hi,
I was trying to create a report with Oracle RDB Table and Essbase by following the steps given in "Federating Essbase and Relational Data Sources in Oracle Business Intelligence Suite Enterprise Edition Plus" document at the location http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html.
I am able to see the members from the Essbase cubes and I can also see the Oracle Table values, if they are displayed individually (i.e. different reports) but when I try to get one report with Essbase values with Oracle table records then Oracle table records are not displayed and when see the query log I don't see the query for Oracle table but I see obviously MDX queries for the essbase.
Please help.
Regards,
Paresh

Hi,
Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
**************BIND THE ITAB ****************************
DO 2 TIMES.
APPEND LW_LFBK TO LT_LFBK.
CLEAR LW_LFBK.
ENDDO.
CALL METHOD lo_nd_t_lfbk->bind_table
EXPORTING
new_items = LT_LFBK.
If you want to have dynmic table then take a submit button in the form instead of normal button,
in onaction submit write a loop every time you click that new submit button it should add a new row.
use above coding in onactionsubmit instead of doinit.
Thats it.
Regards,
Ravi

Forms values are not displayed correctly

This is happening on the client view. I have a custom form and after some Windows updates on user's laptop, the text field values started stopping to display in the form. If I click on View mode then the text values shown and change back to Edit the form
now text values show up in the text field.
Another thing is when trying to print the view out, text values are not shown up at all. I tried to upgrade user to IE11 and same issue. Using Firefox then text values are shown in print preview but not in Editing. I don't want users to use different browser
rather than IE.
Any thoughts on this would be much appreciated.

Hi,
Since the issue happens after some Windows Updates, I would suggest the user log on another machine and see if the issue persists. If the issue only happens on this laptop, you can manually uninstall the update patch you doubt to test
the issue. Go to Control Panel->Programs and Features->View installed Updates->”right click” and “uninstall”.
Meanwhile, add the SharePoint sites to a trusted zone in IE settings.
Thanks.
Tracy Cai
TechNet Community Support

My photos are not displaying after upgrade to iOS 7, My photos are not displaying after upgrade to iOS 7

On our ipad 2, after upgrading to iOS 7, the photo album is completely screwed, and the saved photos are not displaying correctly. How do we get our photos Back?

OK, tried the reset and it seems to have cleared up some problems; however, the picture problem remains.
Maybe there is something further we could do in settings? My wife uses the iPad as her constant companion and likes to take screen shots (pictures) of recipes and such. She keeps them in albums. Before the update to iOS 7 they all displayed correctly regardless of physical machine orientation. Now, post update, when in landscape mode, which she uses 99.9% of the time, her pics do do fully display. By physically rotating the machine, they will appear correctly. We have noticed that there is a new "function" in edit pics for "aspect ratio."
Should we be using this? If so, she'll have to edit a very large number of pics. So I'm wondering if we're missing some new setting. BTW- this display problem also occurs with pics taken with the camera as well.

Unposted values are not display in input-ready queries - BRAIN 485

Hi experts,
After installing the support package level from "7.00 SP16" to "7.00 SP21" we meet an issue in our input-ready queries.
When we use the setting "Access Type for Result Values" according to master data in a query with time characteristics in columns, the system error BRAIN 485 occurs & no cells are not displayed.
Any idea ?
Thanks in advance,
Laurent

Hi raj,
Thanks for your reply.
Please tell me with which BEx patch you have faced this issue.
We are on BI7.0 SP 19.
Thanks.
Regards,
Rik

EA Version 4.0 - Partition high-values are not displayed (NULL)

The partition high values are not schon in the "partitions" tab of the table. Only NULL was displayed.

Sorry i slept, this is referenced partitioned table. Only in the parent rtable there will be the high-values displayed.

Chart values are not displaying.

Hi Gurus,
We are in BI NW2004s SP11. Actually our web templets are publishing in EP.
For some of the charts are not displaying any values.
IGS_RFC_DEST version is 7000.0.8.1.
Can any one give me suggestion to fix the problem.
Thanks in advance.
Thanks
Raju.k

Hi Arun,
Some of the charts are in Line and Bar. When i check in IGS test here it is showing bar chart.
Still i am facing the problem. Is there any NOTE to apply? please suggest me.
Thanks in advance.
Thanks
Raju.k

SAP Webdispatcher :Images are not displayed after using the URL filtering

Hello,
I have installed the SAP webdispatcher 7.3 on Linux redhat 5.4 in front of the Portal 7.3.
I wanted to restrict the access just for the IRJ prefix so for this i used the parameter wdisp/permission_table = PermFile
with Permfile as follows:
#Denial of the useradmin URL from the WebDispatcher
P /irj*
P /irj/*
The filtering is working well except that for IRJ the images are not displayed so i was using so i added the following line to disply the images to the logon page
icm/HTTP/auth_
P /logon_ui_resources/*
P /logon_ui_resources*
but i still have the same issue for the irj page where no icons are displayed and i can do nothing.
The same issue also happened when using the icm/HTTP/auth_xx
Do you have an idea how to deal with this issue?
Thanks in advance;
Hassan

Hello,
After checking the HTTP code of the irj page on IE, i foud the needed URL to permit so i modified the permision table and it works fine for the moement
P /irj*
P /irj/*
P /logon_ui_resources/*
P /logon_ui_resources*
P /AFPServlet/*
P /AFPServlet*
P /com.sap*
P /com.sap/*
P /webdynpro/resources*
P /webdynpro/resources/*
Thanks for you help,
Hassan

OA_MEDIA images are not displayed after importing VO

My requirement is to add a custom check box to MES Operator page. In the process I extended CO, VO successfully and the check box functionality is working fine. But we found out that some images (coming from $OA_MEDIA) are not displayed. There are two image columns in the page. Images in one column are displayed while images in other aren't. Also what I have observed is, missing images are displayed until I run the VO import on server.
Any help would be appreciated.
Thanks.

Can anyone please help me with this issue?

Issue in query created on infoset - characterstic values are not displayed

Hi,
We have created a query based on an infoset(customized). In this query, values of only one object(sold-to-party) is not displayed. Where as for the same object, values are displayed in the other query created based on the respective ODS.
note : Query based on infoset is alone not coming.
This is the description of the error -
System error in program CL_RSMD_RS and IF_RSMD_RS-READ_META_DATA-02. and it is showing (No entries found).
And apart from that, the values of their respective attributes are also not displayed in the report.
I even verified the object in RSA1 where data is available for that.
Need Help to solve ....
Regards,
Chandru..

Can any one answer for Issue-2. Even I am also facing the same.
Thanks in Advance.

Tcode VL10G quantity field values are not displaying ?

Hi All,
In TCODE - VL10G - Sales and Purchase Order display -
After passing the input values it displays the results with minimum fields in the ALV layout. When I add Quantity fields to the layout - WMENG -Order quantity and any other Quantity related fields it is not displaying values in the results. Even though the values exists in the table.
Can anyone tell me what could be the reason? In the input screen u2013 passing the values in USER ROLE tab has anything related to this issue?
I tried to debug and could not find code related to VBEP table or other table which has quantity fields.
Please let me know if any ideas? Thanks in advance.

Hi,
We are using - SAP ECC 6.0 system.
Any hint how I can solve this?
Thanks.

Report Headings are not displaying after moving request to production

Dear all
A request has been moved to production server for a new report from quality to production server.
First we moved the request from development to quality.
In quality server , the new report is executing successfully, but coming to production,
after moving the request successfully, the headings of the fields are not coming (displaying the database table fields).
I am not understanding why it is happening.
Can anyone suggest me, what to do for executing the report with specified headings for the columns
Thanks & Regards
Maheshwar Rao. G

Dear SIr
I imported again with new request, it came ..but why itz happened in last time.
Thanks & regards
Maheshwar Rao. G

New created values are not displaying after upload

Similar Messages

Maybe you are looking for