New CUMA 7.x can't web access ?

Hi friends ;
new CUMA installation for MCS7845-I2 server. Just follow the instruction installation step. Right after finish the installation some how not able web access to CUMA server. the web links is http://10.10.10.1:7080/adminportal . Suspect that w/s issue, but other w/s not able access too. Those w/s can access cucm, cup unity no issue. What could be wrong ? Pls advice.
rgds
tan

Check to see if Cisco Tomcat is running:
utils service list
Michael
http://htluo.blogspot.com

Similar Messages

Can't Access Public Folders Within Outlook, But Can Through Web Access

Hi all,
I have an Exchange 2010 Server (V14.02.0387.000) with clients using Outlook 2007-2013. Until recently all users could access all public folders without issue. However, since moving the location of the public and private mailboxes on the server (to new drives
with more space and defragging etc), a number of users are unable to access the public folders, getting error "Cannot expand the folder. the attempt to log on to Microsoft Exchange has failed". However, when they log in through Outlook Web Access,
they can view the public folders without issue.
I've tried restarting all the Exchange services, as well as multiple reboots of the server.
Many thanks in advance.
Bob

I'm going to start with some general advice. Don't bother running ESEUTIL anymore to reduce database sizes. If you find you need to do that, simply create a new database, move all the mailboxes to it, and then delete the old database.
If you created a new public folder database, did you change the mailbox databases to point to it using Set-MailboxDatabase -PublicFolderDatabase?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Can GroupWise web access and Mobility service co-exixt?

Hi,
I have installed a test server with GroupWise 2014 and GMS 2.0.1. Everything seems fine - except from clients (iOS used for test) not being able to attach to the GMS.
The webserver shows web access correctly at /gw/webacc - but on the root I still get OES default front page.
From a different test server with GMS I get access forbidden when trying to access / from a client browser.
So:
- Is it supported to have both products on same server?
If yes:
. How/what can I change?

Originally Posted by clausbc
Hi,
I have installed a test server with GroupWise 2014 and GMS 2.0.1. Everything seems fine - except from clients (iOS used for test) not being able to attach to the GMS.
The webserver shows web access correctly at /gw/webacc - but on the root I still get OES default front page.
From a different test server with GMS I get access forbidden when trying to access / from a client browser.
So:
- Is it supported to have both products on same server?
If yes:
. How/what can I change?
GMS is only supported on SLES, so no you should not run GMS on a OES server.
https://www.novell.com/documentation...eq_server.html
Thomas

Cannot press SEND / NEW MAIL button in MS Outlook Web Access

I am completely upset after updating the iphone os 4.1 because i cannot simply send email using the MS outlook web access. FYI I can still view the email but cannot send. my company doesnt allow me to use the POP (similar to yahoo) for security reason and hence i must need to use the webmail (via internet).
moreover, my wife just bought another one which is still under 4.01 but her phone can do. what's the problem? can i convert back to 4.01 or my phone has problem? pls help. thanks!

Solution (found by searching forum for "Safari Crashes"):
Settings > Safari > Autofill > Names & Passwords "Set to OFF".
Then choose "Continue" the next time. You've lost your password fill-in but at least you can log in.

My computer has died and I've had to by a new one. I can no longer access my Creative Cloud serial numbers?

Hello
My computer has died and I've had to by a new one. I have a creative cloud account registered under my email <Removed by Moderator> for both Photoshop CC and Lightroom 5 which I pay for via Direct Debit.
I no longer have the Creative Cloud app but downloaded both programs to my new iMac. Photoshop works fine but Lightroom is still on trial purchase and asks for serial number. My account page on your site has no record of my CC account and shows no serial number for my purchased products. (It only lists a previous purchase of Lightroom-4)
How can get the serial numbers to my purchased products when they don't appear on my account settings on your website. Do I need to close my account a open a new one?

Hello Ratandeep
I pay £8.57 for my Creative Cloud purchases of both Photoshop CC and
Lightroom-5 via my Barclays Bank Account to Adobe in Ireland. The last
payment was 13 Aprii 2015. Two weeks ago.
Now I have a new computer. I can sign into my Creative Cloud but it says I
have a 'Creative Cloud free account' as I'm using trial versions. I do not
have a redemption code as I must of lost it when my old computer died. I
can get online so that is not an issue.
When I sign in to my account the Creative Cloud products do not appear
under my purchases so I cannot view serial numbers or change the credit
card I pay with. It seems that your website and my account section do not
know I am making regular monthly payments for CC.
If you check I am actually making the payments as I describe can you please
let me have my serial numbers.
MANY THANKS
Mike
On Saturday, April 25, 2015, Ratandeep Arora <[email protected]>

I just installed itunes on my new computer and I can't get access to my music library...help!

How do I access my music library when I have just installed itunes on my new computer. It only shows 17 songs in my library.

See this migrate iTunes library post or Recover your iTunes library from your iPod or iOS device.
tt2

Using Office 2011 on a new Mac. Now I can no longer access my entire contact list clicking TO/CC/BCC. Any help would be greatly appreciated!

I am using Office 2011 on a new Mac. I can no longer access my entire contact list when clicking TO/CC/BCC to select several contacts for sending an email. I am so surprised & disappointed at the many difficulties, conflicts, & lack of features on the Mac (Lion 10.7).

Hello,
Are you using Apple Mail or MS Office Outlook for your email program? It has been a know issue for some time now that MS Office 2011 Outlook does not sync contacts with Apple's Address Book. This was true under Snow Leopard as well as in Lion. It worked well when I had Entourage (MS Office 2008) in Snow Leopard but once I switched to Outlook 2011, the sync stopped.
Did you just start using Outlook 2011 or has this happened after you move to Lion? Perhaps you could import your Entourage contacts into Outlook 2011?
Please let us know a bit more about your situation.
Jay

Can I obtain access token from ADFS 3.0 based on OAuth ACS-token that I already have?

Hello!
I have the following setup: iOS device, ACS/WAAD is IDP and ADFS 3.0 as RP, securing access to WIF web service.
I want iOS application users to be able to access ADFS-protected web-service.
I have created some users in WAAD, configured trust between ACS IDP and ADFS RP.
ADFS is registered in WAAD with AppID = ADFSAppID
I am doing the following request in order to obtain authorization token for iOS app user from ACS:
const string issuerName = "[email protected]";
const string issuerPassword = "Password!23";
var authContext = new AuthenticationContext("https://login.windows.net/ADFSAppID");
var uc = new UserCredential(issuerName, issuerPassword);
var result = authContext.AcquireToken("http://adfs.appdomain.com/adfs/services/trust",
"ADFSAppID",
uc);
_authHeader = result.CreateAuthorizationHeader();
So, I have a token from ACS in JWT format.
Now I need to present this token to ADFS in order to obtain a new token that I can use to access the web-service. I am trying the following POST-query:
https://adfs.appdomain.com/adfs/oauth2/token?grant_type=authorization_code&code={0}&client_id=ADFSAppID&redirect_uri=http://web_service_url
However, when I try accessing web service with that token, I am getting 403:unauthorized and redirected back to ADFS.
I have already tries lots of code solutions, such as
http://leastprivilege.com/2010/10/28/wif-adfs-2-and-wcfpart-6-chaining-multiple-token-services/
http://www.cloudidentity.com/blog/2013/07/30/securing-a-web-api-with-windows-server-2012-r2-adfs-and-katana/
http://blog.scottlogic.com/2015/03/09/OAUTH2-Authentication-with-ADFS-3.0.html
But somehow the problem remains: I cannot get such authentication token from ADFS that it is accepted by my webservice as a valid token.
Can anybody provide any links or code samples of token exchange between ACS and ADFS?

Yes, it is. I was able to authenticate normally, if I am using ADFS as IdP for WIF RP.
But when Azure is IdP for ADFS-protected WIF WS, I am unable to get tokens that would be accepted by WIF WS

Publish RD Gateway and Web Access with One-Time Password (OTP) / Two-factor Authentication WITHOUT ISA/TMG server

Hi everybody,
I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
The setup is supposed to be like this:
LAN:
1 DC (2008 R2)
RD Farm (2012)
1 SA Server (2012)
DMZ:
RD Gateway/Web Access (2012)
Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
(without the OTP extension).
If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
contain the correct OTP extension.
The problem comes here.
When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: Unknown username or password.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: server
Source Network Address: 192.168.x.x
Source Port: 63003
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
The problem is that no matter what i try the above problem stays there.
Is it not possible to just forward ALL authentication handeling to a remote server?
The only solution I've found to get it working someday in the future is this:
"Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
Also this link describes it:
http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
Please, bring me some answers before my head explodes! :)
PS, long question = maybe some errors, ask me if something is unclear.

Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Since updating my iPhone 4 to ios6 I can no longer access itunes through the itunes app. I just get a blank white screen. Is there a fix for this yet?

Since upgrading my iPhone 4 to the new ios6 software I can no longer access itunes through the itunes app. I there a fix for this yet?

Scalesy05 wrote:
I there a fix for this yet?
Why would there be a fix? YOU are having the problem. I'm not, no one I know is having the problem. No fix is needed.
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new. Have you been through any, if not all of these troubleshooting steps yet?

New option to open custom Excel content type in Excel Web Access

Hi,
This question is specifically for Sharepoint Online if that affects the possible solution.
I would like a custom content type with Excel template to open up in Excel Web Access when a library's New>"My Content Type" option is chosen. I have configured the content type (deriving from "Document"), pointed it to the spreadsheet
template I've uploaded, added the content type to the library and set the library to "Open documents in the browser".
However when I choose the new option for the content type it always opens it in the Excel desktop client. If I then save the document to the library, then it does view and edit in Excel Web App after that.
Is there any way for the initial "New" Excel document to start editing in Excel Web App?
Thanks in advance,
Peter

Make sure Office 2011 is fully updated. It shouldn't have a problem opening those documents.
When I open a 97 - 2004 workbook, it states that it needs to be converted. That may be what is crashing on your copy of Office.
Have you tried creating a new account and see if you can open them there.

Apple Users Can't Get Rid Of The New 'Super Cookies' That Track Private Web Browsing

Further to the article "Apple Users Can't Get Rid Of The New ‘Super Cookies’ That Track Private Web Browsing" https://ca.finance.yahoo.com/news/apple-users-cant-rid-super-180500863.html, is there a solution to resolve this security issue?
Here's an excerpt from the above mentioned article;
"Apple users are particularly vulnerable, as their devices do not have a function that lets users delete super cookies from their browsers.
Most websites place what’s called a “cookie” on visitors’ computers, which is used to track them and record their preferences. It’s how websites can remember your password, for example. Like your web browsing history, they’re easy to delete. If you use your browser’s “private browsing” mode they’re never saved in the first place — and advertisers can't track you, and other computer users can't go back and see what you looked at.
However, a flaw in a modern web security feature called “HTTP Strict Transport Security” (HSTS) allows websites to plant “super cookies” that can be used to track web users’ browsing habits even when private browsing is enabled.
Here’s how it works.
Security researcher Sam Greenhalgh writes that HSTS “allows a website to indicate that it should aways be accessed using a secure connection that encrypts your communication with the site.” This “flag” is then saved by your web browser, ensuring that any future visits to the website are secure. But this can also be abused, using this feature to store a unique number that can be used to track your web browser.
And because HSTS carries over into private browsing, it means the “super cookie” can be used to track you whether you’re attempting to cover your steps or not.
Greenhalgh says that Apple’s Safari web browser is especially vulnerable to the exploit. While clearing cookies on Mozilla’s Firefox, Google Chrome or Opera also erases HSTS flags, deleting the super cookies, there’s no way to do so on Safari on iOS devices.
This means that if you’ve had super cookies placed on your iPad or iPhone, there’s effectively no way to get rid of them short of reformatting the entire machine."

Hi all,
I tried this with IOS 7.1.2 Safari on an iPad retina and the super cookie did not persist after web data and history was deleted.
I also tried this with IOS 8.1.2 Safari on an iPhone 6, and the super cookie persisted even after deleting web history and website data.
Evidently it was ok on 7.1.2 and broken on 8.1.2.

Can't print PDF's from outlook web access

When I open a pdf from outlook web access the pdf opens in a new tab just fine. When I try to print from that tab it doesn't print. The printing dialog box doesn't come up, nothing happens. I can save the pdf and print it fine. I'm using internet explorer 9 and adobe 9. The operating system is windows 7, I've also tried this on the windows server 2008r2. I've tried it using adobe reader free version and get the same problem.

Are you using a Canon printer? If so:
https://discussions.apple.com/message/15748239#15748239
https://discussions.apple.com/thread/3216206?tstart=0
If not, can you provide more details please and post the log of the hang?
Hope this helps.

Visio Web Access - hyperlinks in Visio drawings always open in new tab

Hi,
One of our users has developed a large collection of Visio drawings that describe the business process. When he clicks on a box in one Visio drawing, it will open the next Visio drawing (using a Hyperlink on that shape).
When he uploads these documents onto SharePoint 2013 and uses the standard Visio Web Access application (full-screen, not a web part - so he just opens the Visio drawing), the hyperlinks work perfectly - except, they always open in a new browser tab.
Is there any way to force the shape hyperlinks to open in the same tab when using Visio Web Access?

Hi sidasta,
According to your description, my understanding is that the hyperlink of
Visio document opens with new tab.
It is by default that SharePoint 2013 Visio Service deals with
the hyperlink of Visio document. There is no approach that Microsoft Visio keep the same location when it follows a hyperlink to open a Web page.
here is a similar post, you can take a look at:
https://social.technet.microsoft.com/Forums/en-US/e0922d48-27af-47ef-90fd-03ec49e05df3/visio-webpartlinks-opens-in-new-tab?forum=sharepointadmin
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Can I install WSUS alongside Windows Essentials Experience Role without killing IIS & Remote web access?

Can I install WSUS alongside Windows Essentials Experience Role without killing IIS & Remote web access?
I have recently installed Windows Server 2012 Essentials R2, but I want to use WSUS on the same server. Is this possible, if so how? Last time I tried this I lost my Remote Web Access.
I did post this in the Windows server 2012 essentials thread but didn't get any replies so thought I'd try posting it here to see if I got any hits here?
Is there a way to get WSUS to install to different web ports i.e. 880 & 8443? Or can I get it to install in a new site in IIS? Its just I know that the Essentials Experience role sets up RWA in IIS and installing the WSUS on top just overwrites
the RWA site & settings? I assume this is also why Remote Desktop Services does the same?
Thanks
JK MCP

Can I install WSUS alongside Windows Essentials Experience Role without killing IIS & Remote web access?
http://blogs.technet.com/b/sbs/archive/2013/06/25/how-to-install-wsus-3-0-sp2-on-windows-server-2012-essentials.aspx
Last time I tried this I lost my Remote Web Access.
Remote Web Access uses the Default Web Site. If you install WSUS to the Default Web Site, it will break things. Install WSUS to the alternate "WSUS Administration" site on port 8530.
Is there a way to get WSUS to install to different web ports i.e. 880 & 8443?
No.
Or can I get it to install in a new site in IIS?
Just select the option during the installer to do that.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

New CUMA 7.x can't web access ?

Similar Messages

Maybe you are looking for