New custom putaway strategy

Hi experts,
Am a techie and in need your clarifications. My requirement is for creating a custom putaway strategy say 'Z' this will be ideally copied from the standard 'I'(Addition to exsiting stock) and new feature (like some of bulk storage etc) to be added to it.
can this be done by config or does it involve programming changes to be done. I would appreciate the steps involved in either cases to proceed.

Hello Ram,
I doubt if you can define your own stretegy "Z". but ofcourse you can use user exit as an enhancement.
You can do coding as per your logic in this enhancement MWMTO003 - Own stock Putaway strategy and activate it for particular storage type in Storage type data settings.
Hope this helps
Regards
Arif Mansuri

Similar Messages

SAP WM Putaway strategy - Next empty bin

Hello,
I am testing putaway strategy - L - Next empty bin.
I' ve created 902 - Storage type:
Also i've been activated storage type search and storage section search:
Then i've added this data to material master:
And i also defined movement type- 101 for purchase orders:
Also, special for this, i've created the empty bin:
But when i am trying to post goods receipt in MIGO, i am getting the following error:
Storage bin Z02 does not exist (check your entry)
Message no. L9009
Could you please advise - what is wrong - why i can't post the goods receipt in MIGO?
Thank you in advance.

Hello, Jürgen
That's the settings for standard 101 wm mvmt type:
That's setting for my 101 wm mvmt type:
Difference - that i don't want to use dynamic storage bins.
And i still have this error:
Storage bin Z02 902 does not exist (check your entry)
Message no. L9009
Now system defines also storage type, because of i wrote it in the mvmt type, but i still can't understand, why it doesn't find storage bin, according the strategy.
I think, that i 've made all necessary customizing settings and i also have one empty storage bin on this storage type and storage section.

Bulk Putaway Strategy

Hi,
I have a query relating to the determination of bins for my bulk putaway strategy.
On my bulk storage type I am using putaway strategy B (Bulk Storage) and mixed storage indicator C (several batches per bin only SU bulk storage)
Having generated a putaway the system successfully denotes next empty bin until capacity as per the block structure under OMM4 is full. So far so good however it does not then allocate the remainder of the putaway to a bin where the same product is house although a different batch. (ie the error message below appears)
System message L3 009
No destination storage bin to be found in storage type 004
However i can manually denote a bin where there is already the same material but with a different batch. The system then allows this entry.
Does anybody understd why the system would not automatically select this bin which should be ok?
Any ideas appreciated.
many thanks,
Adam.

Must be a slow start to the year...too many Xmas ales...
Solution: Set Level of Total Quant Count to 1
Level of Total Quant Count
The Total field is used for internal calculation of the total quant count for SU-managed bulk storage. This parameter influences both stock placements and stock removals.
Stock Placement
For putaways this parameter controls whether the system will automatically mix batches or not. If the parameter is set to "1" (batch neutral), the system looks for a storage bin where the material already exists. The batch number is not taken into consideration in this case. If the parameter is set to "2" (batch specific), the system looks for a storage bin where the batch of the material already exists and attempts to add the new stock to the existing stock. If that isnu2019t possible, the system looks for an empty storage bin.

Pallet putaway strategy question

Dear all,
I am new in the pallet putaway strategy and need your experience advise if you have done this.
Question.
1 - To use the pallet putaway strategy (i.e. P), do I need to configure the Storage Bin Type search (i.e. spro > logistics execution > wm > strategies > activate storage bin type search)?? Is it compulsory?
2 - To use the pallet putaway strategy, the storage type MUST BE a SUT-managed and that the "SUT check activate" checkbox MUST Checked, am I correct?
thanks
Tuff

Hi,
the storage bin type search and the storage unit type check more or less is the same. You have to define storage unit types, storage bin types, assign which SUT goes into which SBT. Well, and then you activate the check.
You need to do this for the pallet strategy. You do NOT need to activate the storage unit management in a storage type with the pallet strategy.
Best regards
Juergen

Putaway Strategy I, not allowing second material with different batch

Hi all,
Can someone please help me to understand where is the problem
My config is
Strg Typ 401
Putaway Strategy I
Capacity check - 4
Mixed storage: X
Addition to existing stock: X
Storage section check -active
Storage bin created for the storage section in the storage type 401
Maximum capacity maintained in Storage bin
In material master WM view 1- maintained capacity.
When system is correctly finding Bin for First material / Batch combination
But when I am trying to create TO for same material with different batch it does not find storage bin - even the storage bin capacity is still remaining
Also it is not accepting second material in same bin.
The only requirement to have startegy I is that same materials can be placed in same Bins (sorry but dont need fixed bin)
Thanks

Hi Hiren,
You are correct I forgot to mention that in my earlier reply. Actually with out storage unit you can store only one quant in a Bin. So it can add stock to the same quant if we use addition to existing sock feature. If the material batch combination changes it cannot use the same quant, so it wont be able to add the stock to existing quant. If a new quant is to be stored in the same BIN it has to be storage unit managed. To in nutshell multi material multi batch your scenario can be achieved with storage unit managed storage type.
For storage unit setup you can refer below link.
Storage Unit Management - Warehouse Management System (WMS) - SAP Library
If you find this useful please close the tread.
Regards
Abhishek

User Exit to configure custom picking strategy

Wonder if anyone can help - I've been requested by one of our analysts to look into the user exit to allow us to define a custom Raw Material picking strategy.
Currently we use FIFO which seems to work on the date that the material is receipted into the warehouse, which is fine if the material is GR'd into stores and then only issued when it is fully consumed. The problem seems to occur when we return some of the material back into warehouse stock. It then seems to take the date we receipted the material back into stock as the date for the picking strategy - resulting in it picking newer batches of material, when an older batch has been returned to stock.
Ideally we need to use the GR Date or the SAP internal batch no (where the earliest batch will always equate to the oldest material).
They have done some investigations and it seems to be that the recommended solution is to use user exit MWMTO004 or MWMTO013.
However, the problem is I'm not sure what to code here to get the FIFO strategy to use the GR Date or Batch No - do I have to lookup, find the earliest GR Date/Batch No and then assign it to a particular field in order that this will then be used for the picking strategy ?
Does anyone have any examples of code they've used in the user exit when they wanted to create a custom picking strategy ?
Many Thanks for any help,
Helen Smith

BADI is available to create custom field in material component , but it is available as of ECC 6.0 EHP3 , not sure about 4.7

Using ID Point for Repacking - no putaway strategy allowed

Hi All,
I have a business requirement to have an ID Point servicing inventory that is putaway to one specific storage type. HUM is active and when the goods are received at 902 they are potentially packed on a pallet. The pallet is moved to the ID point where it is unpacked and then put away.
The systems allows configuration of only one repacking area per warehouse number where you can assign a fixed bin.
Unfortunately the business do not want this activity happening at the normal repacking area (923) which is also used for other things so must remain configured.
In order to perform repacking at the ID Point I must have no putaway strategy assigned to the storage type. Without the putaway strategy. how can I get the system to select a bin - any bin will do, either a fixed bin, a dynamic coordinate, it doesn't matter.
I have a backup solution which to create a special movement indicator, new mvt type and enter the destination bin in the movement type, however I'm looking for something a little "nicer".
Regards,
Busaboy.

Dear Karthik
You are right, I did activated Indicator: Activate Storage Unit Type Check for Stock Placement in SPRO->LE->WM->Master Data->Define Storage Type
The Indicator: Storage type with storage unit management was also ticked automatically by system when I selected Indicator: Activate Storaget Unit Type Check for Stock Placement.
Are you trying to say the ID Port defined in Storage Type will have higher priority over the Storage Type value I maintained in the Storage Type Search Table?
I have already maintained the Storage Bin and I still do not understand why system still go for ID port. As far as I know, system will suggest the Storage Type from ID Port ONLY if storage bin in this storage type as their destination are not maintained in first in the other setting.
Quoted from SAP HELP
Identification point for storage type
Identification point (storage type) of the current storage type.
All goods movements that do not have a specific storage bin in this storage type as their destination are first directed to the identification point.
Here the goods are identified and a transfer order is generated for the actual transfer of the goods into the storage type concerned.
Please help.
Edited by: Daimos on Nov 4, 2011 3:25 AM

No standard message displayed in the new custom form

Hi All,
I developed a new custom form for FA module using Template.fmb. It is not showing any standard messages such as "Transaction complete: 1 records applied and saved". The records are getting saved. I even tried setting in when-new-form-instance ":SYSTEM.MESSAGE_LEVEL := 0" but that too didn't work out.
Please help on how to display the standard message. Please let me know if I am not clear with my question
Details
Oracle Form version: 6i
Application version: 11.5.10

Can you see if something in the code is overriding your message level?
Can you set the message level to 0 in the pre-commit trigger?

How do I completely enable a new custom asset in Correspondence Management?

Hello!
I'm trying to add a new custom asset to the Correspondence Management Solution Accelerator, and have it behave like all other assets in the system (ie searchable, updateable etc). I'm almost there, but there's obviously something I'm missing, and I was hoping someone here might have done this before, or have a link to some documentation regarding the matter that I may have missed. The asset I'm trying finish creating is for a LiveCycle user in a specific domain. This is what I've done so far...
I've created the asset definition MyUser.fml and placed it in the FSIApp\Portal\webapp\WEB-INF\assetDefinitions folder. I've then registered this fml file in the spring-config.xml file in both the 'lc.cm.assetDefinitionsDeployer' and 'lc.cm.assetTypeRegistryBootstrapper' beans. In the 'lc.cm.assetTypeRegistryBootstrapper' bean, I set the key to 'MyUser', and the value to the class path of my Java class that represents this asset.
On the Java side I've created the MyUser.java class, as well as MyUserService.java and MyUserServiceImpl.java to allow the searching, updating etc of the MyUser assets.
After running the Bootstrap process, I can log into the Manage Templates application, select Data Dictionaries from the 'View' dropdown, and view/edit the MyUser data dictionary properties with no problems. So I'm happy that the asset has successfully been registered with the application.
Where I'm stuck is choosing the MyUser asset from the drop down, and searching the system for assets of that type. I can choose the MyUser asset type from the 'view' drop down, but the search result returns an empty array.
From digging into the existing Manage Templates code, I've created the following classes:
public interface IMyUserService extends IEventDispatcher - containing the following function definitions:
          function getMyUser(id:String):IAsyncToken;
          function getAllMyUsers(param1:Query=null):IAsyncToken;
public class MyUserSeviceProvider extends ServiceProvider - containing a getter/setter for MyUserServiceDelegate
public class MyUserServiceDelegate extends ServiceDelegate implements IMyUserService - containing the functions defined in IMyUserService, as well as creating the RemoteObject to perform the actions.
The MyUserServiceDelegate constructor is:
     public function MyUserServiceDelegate ()
            super();
            _service = new RemoteObject("myapplication.services.myUserService");
            _service.showBusyCursor = true;
This is the code for the function in getAllMyUsers in MyUserServiceDelegate:
     public function getAllMyUsers(param1:Query = null):IAsyncToken
            var operationToken:AsyncToken = this._service.getAllMyUsers(param1);
            var token:IccToken = new IccToken(this.className + ".getAllMyUsers");
            operationToken.addResponder(getDefaultResponder(token));
            return token;
I've also made changes to the following config files to register the RemoteObject destination specified in the MyUserServiceDelegate constructor:
spring-http-config.xml:
     <bean name="/service/UserService" class="org.springframework.remoting.httpinvoker.HttpInvokerServiceExporter">
        <property name="service" ref="myapplication.services.myUserService" />
        <property name="serviceInterface" value="com.mydomain.lc.services.MyUserService" />
    </bean>
remoting-config.xml:
     <destination id="myapplication.services.myUserService"/>
flexmessagebroker-servlet.xml
     <flex:remoting-destination ref="myapplication.services.myUserService" />
Above my Java class definition of MyUserServiceImpl.java I have the following line:
@Service("myapplication.services.myUserService")
So......
My problem is that when I choose the MyUser asset from the drop down, no search results are returned (an empty array is returned). I have logging code in the getAllMyUsers function in the MyUserServiceDelegateclass.as, as well as logging in the MyUserServiceImpl.java class (not shown in the above code snippets) and neither of them fire when selecting the MyUser asset from the drop down. So neither of the classes are being called on the search. If I force a search via the following line:
MyUserSeviceProvider.getMyUserService().getAllMyUsers();
the logging in both the Flex and Java classes works (and the java class returns the results as expected). So I'm happy that these functions, as well as the linking between the Flex and the Java side is working correctly.
The step that I can't seem to work out is having the selection of the asset in the drop down call the desired function automagically. I've been digging into the SearchManager, the ServiceLocator and heaps of other classes, but I'm falling deeper and deeper into the rabbit hole...
Can anyone shed some light on what they think might be needed to make the final link here? I've been digging and digging into the code for days now and my brain hurts!!
Any advice appreciated!!
Thanks,
Kristian

Hi Saket,
By 'not really complete' I'm assuming (hoping) that some work has been done on this already. Our project requires the use of custom assets, so it's very important that we get this functionality running as soon as possible.
Any help, unsupported or otherwise, would be great. Feel free to email me any details if you'd prefer not to post anything public on the boards.
Cheers,
Kristian

New Customer with Service Issue

I am very frustrated with Verizon & customer service. Our family is new to Verizon within the last month. We drop calls all the time and get choppy service by our house. I talked to local store and they advised for me to call Customer Service. The representative made me reset my new phone and everything, then they sent me to next level support. The next level support did a case and tried to sell me an extender which I refused to do. I am a new customer who spent alot of money to switch why should a spend another $250. The next level suppport stated they would call me back today after the case was resolved & did not. After a few dropped calls today, I called back, the first next level support person wanted to reset my phone again and told me the engineer said there not really an issue. He had me on hold several times and on the phone for over 25 minutes. The call then dropped and rep never called me back. Got on the click to chat and Hannah called me to try to resolve. She sent me to next level support who could only offer to sell me the network extender. I feel that I should have never switched from AT&T to Verizon because they just want me to spend more money and not resolve my issue. I am stuck in a contract and if there is an emergency that happens in my area then my children will never be able to get ahold of me. My childrens safety is the most important thing to me but not to Verizon. Very disappointed!!!

Why did you switch?
Why didn't you figure this out during the return period?
You don't have access to any landlines for children to contact you in an emergency?

Comcast new customer screen after firmware update

Every time I try to update my Airport Extreme's firmware, I get the Comcast new customer screen on my browser and can't access any pages other than that. I've had Comcast come out and they it is a problem with my router and not with them since I can surf the internet when my computer is hooked up directly to the modem. I've tried everything including resetting the Airport and cycling the power and nothing works. The only way I can continue to access the internet is when I upload the factory firmware version to the Airport. Has anyone had this problem before or have any suggestions on how to remedy this?

yeah I recall that pain in the butt problem. You probably had them(Comcast) install their so called mac software which you should not have done .
When my memory comes back I'll post the counter measure.
Although try this in the meantime;
ethernet from Comcast modem to wan port of apple router. ethernet from your Mac to lan port of Apple router. Power off the modem and the router. Bring the modem up first then the router. Place the router using DHCP and set your wireless config if need be. Should work.

How can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it

how can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it. i design patterns but am fairly new to photoshop. i used to be able to click on the drop down menu in patterns in the 'fill' box but cannot now do this. have i inadvertently clicked on something to turn this facility off? i now have to go to 'preset manager' and manually move my new design to the first box and click 'done' so that i can use it.

Which version of photoshop are you using?
After you define a custom pattern it should be added to the bottom of whatever patterns are already loaded.
For example, if you define a custom pattern and then go to Edit>Fill>Pattern, the newly defined pattern should have been added to the existing loaded patterns.

Fbl5n report showing pritn output for a new customer on a new page

Hello All,
In fbl5n when i execute for all the customers and give print command its printing every new customer on a new page but i want to print the data continously.
Pls let me knw how to avoid this?
Sunny

Hi Sunny,
you're case is quite common, because SAP displays the customer data in a standard layout, putting a page break after every customer and company code.
In order to avoid this, you may change the grouping criteria. For that,
1. be sure that you have not clicked on the header of any column in the list
2. click on button "sort ascending"
3. here you'll see that fields "company code" and "account" have an asterisk on column NG (new group). This means that, for every change in these fields, SAP will insert a page break
4. remove these asterisks
5. (optional) save this layout for further launchings of the report
I hope this helps. Best regards,
Alvaro

How to create new Custom XML Report without using Form Builder

Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
Abhi

Hi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode

New customized report using PLD or QUERY PRINT LAYOUT to show customers onl

I am working with a Software Developing firm as an SAP Consultant.
Please tell me how to create a new customized report displaying various details as required by the client in the report using PLD or Query Print Layout.
Please help me asap.

Hi,
You can create queries using the Query Generator or the Query Wizard tools.
After you have created your own queries, you can link them to a required print layout.
for user reports.Look at:
Tools --> Queries --> Query Print Layout
Set there your query reports.
Printing User-Defined Queries
After you had linked a user-defined query to a user report template, you can now print it
according to its linked print layout.
There are two ways for printing your user-defined queries.
1. Using the Query Print Layout window:
Select from the upper menu Tools 􀃆 Queries 􀃆 Query Print Layout.
Click the Reports tab page.
Click to highlight the required query you would like to print.
Click on the printer icon or select from the upper menu File 􀃆 Print.
The user-defined query is printed according to its linked print layout.
2. Using the Queries Manager window:
Click the Queries Manager icon on the upper tool bar.
Click to highlight the required query you would like to print.
Click on the printer icon or select from the upper menu File 􀃆 Print.
The user-defined query is printed according to its linked print layout.
Note! You can also print preview user-defined queries. Do so by selecting the Print
Preview option as described in the methods above for printing your query.
Btw, you could search the manual training files relate to query PLD in http://www.service.sap.com/smb
Rgds,

New custom putaway strategy

Similar Messages

Maybe you are looking for