New daq system - optical spectrocopy imaging

Hi all
My objective: Develop a DAQ system to be controlled using labview. Its for SPECTROSCOPY purpose.
My OLD DAQ MODULE consists of :
1. Analog devices -  AD9432 - ( 12-Bit, 80 MSPS/105 MSPS ADC )
2. Motorola - Digital Signal Processor 56L307EVM - 24-Bit Digital Signal Processor
My NEW UPGRADED DAQ SYSTEM should be something advanced. But on lookup many DAQ modules from third party industries are not providing drivers so that I can control using labview.
Therefore I will need a High speed digitizer something and a DSP board that can accumulate the very large data and perform some simple filtering techniques on it. I have no idea how to begin.
I seek your guidance regarding this.
If any one out there is doing a experiment on Spectrocopy imaging. please help me out.
Thank you
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]

Hello Abhi,
The requirements you have specified sound like a great application for our FlexRIO Products which are available in either PXI or PXI Express form factors.  This product line has an onboard FPGA where you can implement the custom logic that you need for processing the data.  In addition to the FlexRIO module you will need the Adapter Module (FAM) that will turn your module into a digitizer.  It looks like the closest FAM we provide that is similar to your current specs is the NI 5732 which is a 14-bit 80MS/s digitizer but we also have better modules available.
Anthony F.
Product Marketing Engineer
National Instruments

Similar Messages

  • New Uses For Our Current Dyno Thermocouple DAQ System

    Hello,
    Currently we are using this setup to collect data in our high temperature dyno.
    SCXI-1001 Chassis
    4 - SCXI-1120 -> SCXI 1320 units
    8 - SCXI-1102 -> SCXI 1303 units
    feeding into a PCI-MIO-16E-4 (PCI-6040E) DAQ system.
    Also available are a SCXI-1000DC chassis, TC and BNC 2095 terminal blocks, and SXCI-1104 multiplexers.
    The sensors we are looking to use have a 4-wire connection consisting of V(excitation),Common Ground, V(output), and V(offset). I would like to know if there is a way we can use the current equipment we have available to provide the 5v excitation source needed, as well as collect the V(output). Any help regarding the appropriate setup or wiring would be greatly appreciated. Thank you in advance
    -Jason McBride

    Hi BigChief,
    If you're providing an external excitation voltage to your sensors, you should be able to use either the SCXI-1102 or SCXI-1120 module, with their respective terminal block, to perform voltage measurement (provided the signal is within the module's input range). You can wire V(output) and Common ground as input to one of the channels on the terminal block. If the V(offset) is used for zeroing the measurement, you can wire that into a second channel, take the measurement, and subtract that value programmatically. If you're setting up a virtual or global channel, select the measurement type as "voltage" instead of "temperature".
    I hope this helps.
    Thanks,
    Lesley Y.

  • How can I keep my MacBook safe is Apple is no longer supporting Snow Leopard? My MacBook was purchased in 2006 and cannot be upgraded to the newer operating systems.

    I have a MacBook which I purchased in 2006. It cannot upgrade to newer operating systems.Since Apple has stopped support to Snow Leopard, how can I keep my MacBook safe? Buying another computer is not an option. Any ideas or suggestions? Many thanks.

    Klaus1 wrote:
    Apple still sell, and therefore support, Snow Leopard.
    For what it's worth, from my reading of the Snow Leopard EULA (and I would  assume that there is similar language in the EULAs for all other operating systems, as well), I'm not seeing any obligation on the part of Apple to provide Security Updates of any kind, period/full stop. The wording appears to be completely "use at your own risk." I have no idea whether this "use at your own risk" would survive a legal challenge, or if such a legal challenge would depend on whether or not Apple is still selling (or even giving away for free) an OS, or whether local law would, according to this, override the EULA. Perhaps this is why Apple never formally announces EOL or discontinuance of support for an OS. They can always claim that they are still supporting an OS, whether or not in any practical sense, they are. There was even a very late Flashback detection and removal script which Apple issued for 10.5 well after it was clear that they had stopped supporting Leopard. This hardly constituted ongoing support, but perhaps it was to deter the threat of legal action, or maybe it was simply out of benevolence. I don't know.
    Besides that, even when Apple was still actively "supporting" Snow Leopard, which I don't think it is any longer, "use at your own risk" would still have applied to a case where Apple may have been late with a patch, or a response, or an adequate response, to a zero-day threat, such as Flashback was, which was constantly evolving. Many thousands were affected by that, and, to my knowledge, at least, there was no legal action directed at Apple throughout or after that episode. If there was any, I don't think it succeeded.
    7. Disclaimer of Warranties. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT, TO THE EXTENT PERMITTED BY APPLICABLE LAW, USE OF THE APPLE SOFTWARE AND ANY SERVICES PERFORMED BY OR THROUGH THE APPLE SOFTWARE (COLLECTIVELY “SERVICES”) IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE APPLE SOFTWARE AND SERVICES ARE PROVIDED “AS IS” AND “AS AVAILABLE”, WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND APPLE AND APPLE'S LICENSORS (COLLECTIVELY REFERRED TO AS “APPLE” FOR THE PURPOSES OF SECTIONS 7 and 8) HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE APPLE SOFTWARE AND SERVICES, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF SATISFACTORY QUALITY, OF FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. APPLE DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE APPLE SOFTWARE AND SERVICES, THAT THE FUNCTIONS CONTAINED IN, OR SERVICES PERFORMED OR PROVIDED BY, THE APPLE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE APPLE SOFTWARE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE, THAT ANY SERVICES WILL CONTINUE TO BE MADE AVAILABLE, THAT THE APPLE SOFTWARE OR SERVICES WILL BE COMPATIBLE OR WORK WITH ANY THIRD PARTY SOFTWARE, APPLICATIONS OR THIRD PARTY SERVICES, OR THAT DEFECTS IN THE APPLE SOFTWARE OR SERVICES WILL BE CORRECTED. INSTALLATION OF THIS SOFTWARE MAY AFFECT THE USABILITY OF THIRD PARTY
    SOFTWARE, APPLICATIONS OR THIRD PARTY SERVICES. YOU FURTHER ACKNOWLEDGE THAT THE APPLE SOFTWARE AND SERVICES ARE NOT INTENDED OR SUITABLE FOR USE IN SITUATIONS OR ENVIRONMENTS WHERE THE FAILURE OR TIME DELAYS OF, OR ERRORS OR INACCURACIES IN THE CONTENT, DATA OR INFORMATION PROVIDED BY, THE APPLE SOFTWARE OR SERVICES COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE, INCLUDING WITHOUT LIMITATION THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT OR WEAPONS SYSTEMS. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY APPLE OR AN APPLE AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE APPLE SOFTWARE OR SERVICES PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THE ABOVE EXCLUSION AND LIMITATIONS MAY NOT APPLY TO YOU.
    8. Limitation of Liability. TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT SHALL APPLE BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, LOSS OF DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR USE OR INABILITY TO USE THE APPLE SOFTWARE AND SERVICES OR ANY THIRD PARTY SOFTWARE OR APPLICATIONS IN CONJUNCTION WITH THE APPLE SOFTWARE, HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE) AND EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT APPLY TO YOU. In no event shall Apple's total liability to you for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the amount of fifty dollars ($50.00). The foregoing limitations will apply even if the above stated remedy fails of its essential purpose.
    http://images.apple.com/legal/sla/docs/osx_snow_leopard_sec_upd.pdf

  • New computer system, printed colours are wrong, please advise.

    I recently bought a new computer system inc Dell U2711 monitor and purchased LR4 and CS6. All was well, or so I thought, until I got some prints done. The prints from my old system (with which I only used elements 10) look fine. Those from my new system look awful, the colours are just wrong. My workflow is RAW image opened in LR then finished off in CS6 before saving as JPEG. The saved images look alright but when I either click view/ proof colors or if I use an image as a desktop screensaver, it gives the same washed out appearance with wrong colours. I'm at the limit of my technical knowledge here, does anyone have any ideas please?

    Thanks for that link, I will read that. I've been going through the settings on LR and CS and I think I begin to understand. I've been looking in LR preferences and that gives three options for color space: There is Prophoto RGB (the default which LR recommends as it says the other two don't give the full colour range available in LR) then there is sRGB and lastly Adobe RGB (1998). There is no such option that I can find in CS6 preferences but, when I export a TIFF file from LR4 into CS6 and then save it from CS6 it shows the color as ICC profile Adobe RGB (1998). I also notice that in this setting using the view/ proof in CS6 the colours are slightly askew (they were way off when I had the LR preference set to ProphotoRGB). If however I set the LR preference to sRGB and then export to CS6, using the view/proof the colours stay the same so I'm still a bit confused. Maybe I'm just thick, it's a lot to take in.
    I've processed a RAW image in the recommended ProphotoRGB, exported it to CS6 then before saving gone into edit/ convert to profile/ sRGB: the colours have stayed the same and using the view/ proof or save as desktop background = no change and everything looks good. So, is this the way forward and should that format work when printed? (I've only got a crappy basic two ink printer which I wouldn't trust to print anything other than text). Also, is it possible to get CS6 to save as sRGB by default or do I have to go through this routine for every image I want to save and print?

  • Scanner driver for Konica Minolta 1690MF since new operating system Maverick

    Scanner driver for Konica Minolta 1690MF will not work since new operating system Maverick.
    Update driver came from konica minolta - not through an Apple software update.
    Konica M 1690MF will print as normal but 'image capture' is empty.

    Same problem. I emailed KM support. Was told new drivers were being considered. Not sure what that means. No date given. Have tried several 3rd party drivers, but none work. Would love for someone to post a solution.

  • Managing backup systems for referenced image masters

    The manual says:
    +Aperture doesn’t back up the masters of referenced images located outside the Aperture library. *You must maintain your own backup system of referenced image masters.* Aperture does back up the versions, previews, and metadata information associated with referenced images, but not the masters themselves.+ (my bolding)
    So, somehow, I ended up with some images (older, it seems) in the vault but other images (newer) as referenced. An incomplete back up to the vault. I understand how I can move those referenced to the Vault but:
    1) is there a fast way to find and select all the referenced masters for this move? Like a menu item or a button in a dialog box that says "Find and move all referenced Masters to the vault"? Simple eh?
    2) why does Apple not allow you to keep referenced Masters out of the vault but a copy of the Master backed up in it? When it goes to reinstall (hopefully never!), it can just reinstall the whole vault in Aperture - if need be. I could live with this especially if it makes backing up all my Masters easy and recovering all of them assured.
    3) Since #2 is not possible for now - how do people back up referenced files and why do you do referenced over Vaulted or a combination of the two (which is what I have but, not knowing I was doing this)? I would like to be able to look at images on my MacBook Pro but really keep the bulk of the images and editing on a MacPro.
    4) when I imported iPhoto to Aperture, did they all come in as vault Masters or referenced?

    Joseph Coates wrote:
    ...when I imported iPhoto to Aperture, did they all come in as vault Masters or referenced?
    Images are imported according to settings you select. Probably you initially imported using a Managed-Images Library. To import by Reference from within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
    ...how do people back up referenced files
    Using any normal data backup method. I like to simply manually Finder-copy to external hard drives.
    and why do you do referenced over Vaulted or a combination of the two (which is what I have but, not knowing I was doing this)?
    Actually the correct syntax is Referenced over Managed. Vault refers to one type of backup routine that does include Managed Masters.
    The primary problem with using a Managed-Masters Library instead of a Referenced-Masters Library is that for almost all modern digital photogs using Aperture their quantity of image files will grow quickly, rapidly taking more and more space on a single internal hard drive if Managed-Masters keeps all image files on a single internal hard drive.
    Hard drives slow as they fill, so unless a multi-drive SATA/eSATA array is used a Managed-Library drive will sooner or later lose performance. Use of Referenced-Masters allows the Library to forever stay small enough not to overfill a single drive.
    Personally I consider separate backup of Masters outside Aperture's Vault protocol a benefit, not a negative.
    Using a Managed-Masters Library works even for for laptop/iMac owners if completed Projects with Masters are constantly purged from Aperture but that is inappropriate workflow for most photogs, and the benefits of using a Managed-Masters workflow are minimal.
    I would like to be able to look at images on my MacBook Pro but really keep the bulk of the images and editing on a MacPro.
    Although various user workarounds exist, the issue of synching your laptop Library with your desktop Library has not (yet) been addressed by Apple. IMO Apple's failure (still) to address this key issue is a travesty; Apple's single-user Filemaker has had that capability since the 1980's.
    I suggest going to "Provide Aperture Feedback" under the Aperture menu and requesting that Apple provide single-user synch capabilities for two Libraries (such as the laptop/desktop setups that you and I both have). Note that it is important to specify single-user, two-Libraries, because multi-user scenarios are entirely different solutions that - unlike single user solutions - are usually very complex and expensive.
    -Allen Wicks

  • HT2486 How do I open Address Book version 4.0 on a new operating system OS X?

    My mom's computer wasn't updated to a newer operating system. Finally got her system updated but can no longer open her address book or view any of her contacts. Have tried to open the file with another program and some other ideas, but nothing is seeming to work. Any ideas?

    HI,
    I am going to phrase this another way.
    The Address Book in OS versions up to Lion has changed it's name.
    An Upgrade to Mountain Lion should have taken care of moving the Address Book details to the new Contacts app.
    It is an Apple app rather than being part of the OS.
    However it is fair to say it comes with the OS and is closing integrated into many other Apple app such as Messages and Mail.
    Migrating stuff from an older Mac User Account should have only been the User's Folder and not older version of Apps that may not even launch on the new OS
    Address Book 4.0 is early in the life of Leopard (OS X 10.5.x) and would normally be at version 4.1 by the time the OS X hits the last update at OS X 10.5.8
    I would check you have Contacts in the Applications folder.
    (if some Apple Apps are moved into Sub folders then they don't get Updated or Upgraded properly - I have heard for instance of someone putting iChat in with other IM apps in a IM app folder within the Applications folder which causes iChat not to update)
    Note iChat should have upgraded to the Messages app.
    10:00 PM      Sunday; December 30, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • New Phone System Help

    I've been trying to get information on what to get for a new phone system, but both Cisco, and Cisco partners are being unhelpful. I guess they don't want my money. Anyways...
    I'm looking at a UC560.
    Does this come with CME?
    Here's my scenario:
    Cisco 2821 Advanced IP IOS 124-24.T3.
    100 staff
    30-45 phones. (Our staff share phones)
    Currently 5 different lines, possibly going to high as 10.
    1Gb backbone switched network using Catalyst 2960.
    We want to be able to use Cisco Mobile 8.1 on our iPhones.
    Any suggestions?
    It's so hard finding information for these things, even when I do contact a partner!

    Hi Nick
    In the interests of being a Cisco partner that does try to assist , here's a few pointers:
    1. A UC560 does indeed run CME. It's a bundle of IOS, CME, CUE (voicemail), 8 PoE ports and also analog / digital interfaces depending on the model chosen. The UC560 can support up to 104 handsets / users. 
    2. On this note, your 2821 can also run CME (simply with the purchase of the CME Software and some additional modules) and can support up to 48 handsets.
    Both the UC560 and 2821 can support a variety of interfaces to connect to external lines incuding analog (FXS, FXO and E&M) and digital (ISDN PRI and BRI). No issue with supporting 10 incoming calls on either platform.
    Net result, you'll need to decide whether you want to run CME (and possibly Unity Express) on you current 2821, or purchase a new UC560. My gut feeling (without doing the maths) is that it will probably be cheaper to go with the UC560 as you'll may need additional DRAM /flash on the 2821, you'll need a new software license, Unity Express module, DSPs etc.
    CME 8.6 supports the iPhone software client, so you will need to ensure that you get the correct software image on your 2821 / UC560 depending on which way you go.
    The 2960 is a suitable platform for running this size of network. There are various models available with PoE, gigabit uplinks etc. It has no layer 3 switching support, so you'll need another device to route between your VLANs which can either be an additional layer 3 switch (3560 or higher) or the CME router itself. Be careful of running high layer 3 traffic through a CME box. I've seen calls dropped when one of my esteemed colleagues started copying multi gigabit VMware images around when the CME Router was doing the layer 3.
    HTH. If you need any more details, post back here.
    Barry

  • Can we add new logical system in Entitlement tab in SAP Authentication.

    Hi ,
    We already Installed and configured sap integration kit and every thing works fine. My question is as of now we connected our sap BW Dev system  to BOBJ but we would like to connect to BW Prod System to same BOBJ System. What are the steps we need to follow to do this.
    Can we just add the new logical system in entitlement tab of sap authentication in BOBJ 3.1? and import the roles and login to BOBJ USING THE Newly added SYSTEM Credentials.  Thanks in Advance.
    Thanks,
    SK.

    Hi Ingo,
    Thanks for the information.
    Are there any specific steps you need to follow when you are adding one more system to sap authentication. can you please give the steps we need to follow to setup this in right way. Thanks in advance.
    Is there any thing we need to configure on sap side other than sap logon ticket parametre. If you can please provide the steps it will be great. Thankyou very much In advance.
    Thanks,
    SK.
    Edited by: Vallabhaneni SK on Jul 14, 2009 8:53 AM

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • New Development System

    Hi, just wanted to bounce some ideas off you guys.
    We are about to create a new ECC 6 system initially a sandbox system for blue print then a Dev system.
    My organisation as a global finance SAP template that we will use.  So the steps would be a fresh install, then install the global finace templete, not sure how but will probably a system copy.
    We also have another stream of work being undertaken in another part of the organisation which is all being done in its own landscape.  We need to split out some of this functionality to use on our system (about 2000 transports). 
    I don't want to copy all of this work over to the Dev system probably from their QA system as it has a load of master / transaction data, but it will give everything we require OK we would need to some clean up work.
    The other option would be to selct the transports that we require and apply them, sequencing will be a issue,
    Ideally I guess the best solution is for all the work to be performed again in the new Dev system
    Its a tricky one, I need the fucntionality but want to keep the system as clean as possible.  The QA system will be built on the transports from Dev.
    Any thoughts appreciated,
    Thanks

    Ideally I guess the best solution is for all the work to be performed again in the new Dev system
    You will be right on this.  Problem w/ a "easy" solution via transport is that you may run into cross development with the same object fighting eachother.  This could result in unexpected behavior in the system, which would turn into a diagnostics nightmare.
    We are currently in middle of upgrading to ECC 6.0.  The plan here inhouse is to actually freeze all modifications for period of 1 quarter, allowing only production fixes only.  This would minimize the number of transports that we have to manually consolidate.

  • New Development system copy from Production

    Hi All,
    Hope you can help me out here with some ideas.
    We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, workbench objects etc.
    But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
    My question is then, is there any other ways to do this when system copy is a no go? I know we can do client copy but then we will not get all the workbench / ABAP programs which we need.
    Any ideas on how to do this?
    Thx. in Advance

    Hi Rasmus,
    But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
    Options 1: As BI objects are cross client , copying client will not solve your purpose 100%.
                    You can perform system copy and then clean up data in DEV
    Option 2: You can create a new Development and then create TRs for required configuration objects and move to new development system.
    Option 3: Use SLO tools to perform container copy without any data.
    Hope this helps.
    Regards,
    Deepak Kori

  • Business Event Appraisal Form in New Appraisal System

    Hi,
    I have created Business Event Appraisal Form in New Appraisal System. I have done Appraisals for one Business Event by an attendee.
    Where can see this Appraisal Document of Business Event and do any change if required. Or from we can delete this documents of Business Event Appraisal.
    I have tried tcode appchange but there only Personnel Appraisal templates are visible.
    Samriddhi

    Hi,
    If you are using a template created by using the Objective Setting and Appraisals componet you can view and maintain forms filled in by employees via Transaction phap_admin_pa.
    Br,
    Art

  • How can I restore my iPhone 3Gs after I tried to update to the new operating system.

    I tried to upgrade my 3Gs to the new operating system(IOS5) and I got some kind of unknown error.  I told iTunes to do the back up before doing the upgrade.  The phone is stuck in restore mode with the "connect to iTunes" logo displayed.
    I have the latest version of iTunes on my computer. I've restarted my computer.  The iTunes doesnt seem to see the iPhone, but when I connect the phone to the computer I hear the recognition jingle by the comoputer, the one you hear when when a piece of equipment is connected to the computer.  In addition, when i look at "my computer"  I dont see the iPhone in the selections of items connected to the computer.
    I have tried all the reset proceducures with turning the phone off and using the home key.
    Does anybody have any suggestions?

    Hi,
    See Here for
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • HT4623 I have a Gen 4 Ipod Touch, it is still running with IOS 4. When i go to my settings and select General there is no Software Update button to choose from. How do i update my Ipod to the new IOS system?

    I have a Gen 4 Ipod Touch, it is still running with IOS 4. When i go to my settings and select <General> there is no <Software Update> button to choose from. How do i update my Ipod to the new IOS system?

    You have to hook it up to a computer and update it to ios 5 and then there will be a "software update" button.

Maybe you are looking for